Revert "i2c: designware: detect when dynamic tar update is possible"
authorJarkko Nikula <jarkko.nikula@linux.intel.com>
Mon, 13 Feb 2017 09:18:19 +0000 (11:18 +0200)
committerWolfram Sang <wsa@the-dreams.de>
Tue, 14 Feb 2017 21:10:26 +0000 (22:10 +0100)
This reverts commit 63d0f0a6952a1a02bc4f116b7da7c7887e46efa3.

It caused a regression on platforms where I2C controller is synthesized
with dynamic TAR update disabled. Detection code is testing is bit
DW_IC_CON_10BITADDR_MASTER in register DW_IC_CON read-only but fails to
restore original value in case bit is read-write.

Instead of fixing this we revert the commit since it was preparation for
the commit 0317e6c0f1dc ("i2c: designware: do not disable adapter after
transfer") which was also reverted.

Reported-by: Shah Nehal-Bakulchandra <Nehal-bakulchandra.Shah@amd.com>
Reported-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Acked-By: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: <stable@vger.kernel.org> # v4.9+
Fixes: 63d0f0a6952a ("i2c: designware: detect when dynamic tar update is possible")
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
drivers/i2c/busses/i2c-designware-core.c
drivers/i2c/busses/i2c-designware-core.h

index 6d81c56..e9db857 100644 (file)
@@ -475,30 +475,28 @@ static int i2c_dw_wait_bus_not_busy(struct dw_i2c_dev *dev)
 static void i2c_dw_xfer_init(struct dw_i2c_dev *dev)
 {
        struct i2c_msg *msgs = dev->msgs;
-       u32 ic_tar = 0;
+       u32 ic_con, ic_tar = 0;
 
        /* Disable the adapter */
        __i2c_dw_enable_and_wait(dev, false);
 
        /* if the slave address is ten bit address, enable 10BITADDR */
-       if (dev->dynamic_tar_update_enabled) {
+       ic_con = dw_readl(dev, DW_IC_CON);
+       if (msgs[dev->msg_write_idx].flags & I2C_M_TEN) {
+               ic_con |= DW_IC_CON_10BITADDR_MASTER;
                /*
                 * If I2C_DYNAMIC_TAR_UPDATE is set, the 10-bit addressing
-                * mode has to be enabled via bit 12 of IC_TAR register,
-                * otherwise bit 4 of IC_CON is used.
+                * mode has to be enabled via bit 12 of IC_TAR register.
+                * We set it always as I2C_DYNAMIC_TAR_UPDATE can't be
+                * detected from registers.
                 */
-               if (msgs[dev->msg_write_idx].flags & I2C_M_TEN)
-                       ic_tar = DW_IC_TAR_10BITADDR_MASTER;
+               ic_tar = DW_IC_TAR_10BITADDR_MASTER;
        } else {
-               u32 ic_con = dw_readl(dev, DW_IC_CON);
-
-               if (msgs[dev->msg_write_idx].flags & I2C_M_TEN)
-                       ic_con |= DW_IC_CON_10BITADDR_MASTER;
-               else
-                       ic_con &= ~DW_IC_CON_10BITADDR_MASTER;
-               dw_writel(dev, ic_con, DW_IC_CON);
+               ic_con &= ~DW_IC_CON_10BITADDR_MASTER;
        }
 
+       dw_writel(dev, ic_con, DW_IC_CON);
+
        /*
         * Set the slave (target) address and enable 10-bit addressing mode
         * if applicable.
@@ -963,7 +961,6 @@ int i2c_dw_probe(struct dw_i2c_dev *dev)
 {
        struct i2c_adapter *adap = &dev->adapter;
        int r;
-       u32 reg;
 
        init_completion(&dev->cmd_complete);
 
@@ -971,26 +968,6 @@ int i2c_dw_probe(struct dw_i2c_dev *dev)
        if (r)
                return r;
 
-       r = i2c_dw_acquire_lock(dev);
-       if (r)
-               return r;
-
-       /*
-        * Test if dynamic TAR update is enabled in this controller by writing
-        * to IC_10BITADDR_MASTER field in IC_CON: when it is enabled this
-        * field is read-only so it should not succeed
-        */
-       reg = dw_readl(dev, DW_IC_CON);
-       dw_writel(dev, reg ^ DW_IC_CON_10BITADDR_MASTER, DW_IC_CON);
-
-       if ((dw_readl(dev, DW_IC_CON) & DW_IC_CON_10BITADDR_MASTER) ==
-           (reg & DW_IC_CON_10BITADDR_MASTER)) {
-               dev->dynamic_tar_update_enabled = true;
-               dev_dbg(dev->dev, "Dynamic TAR update enabled");
-       }
-
-       i2c_dw_release_lock(dev);
-
        snprintf(adap->name, sizeof(adap->name),
                 "Synopsys DesignWare I2C adapter");
        adap->retries = 3;
index 26250b4..c1db3a5 100644 (file)
@@ -125,7 +125,6 @@ struct dw_i2c_dev {
        int                     (*acquire_lock)(struct dw_i2c_dev *dev);
        void                    (*release_lock)(struct dw_i2c_dev *dev);
        bool                    pm_runtime_disabled;
-       bool                    dynamic_tar_update_enabled;
 };
 
 #define ACCESS_SWAP            0x00000001