cygwin port
authorFifer, Eric <EFifer@sanwaint.com>
Thu, 10 Aug 2000 13:15:36 +0000 (14:15 +0100)
committerJarkko Hietaniemi <jhi@iki.fi>
Thu, 10 Aug 2000 13:00:12 +0000 (13:00 +0000)
Message-ID: <779F20BCCE5AD31186A50008C75D997917176A@silldn_mail1.sanwaint.com>

p4raw-id: //depot/perl@6564

README.cygwin
hints/cygwin.sh

index 2a95ab9..886954c 100644 (file)
@@ -27,20 +27,19 @@ platforms.  They run thanks to the Cygwin library which provides the UNIX
 system calls and environment these programs expect.  More information
 about this project can be found at:
 
-  http://sourceware.cygnus.com/cygwin/
+  http://sources.redhat.com/cygwin/
 
 A recent net or commercial release of Cygwin is required.
 
-At the time this document was last updated, Cygwin 1.1.2 was current.
+At the time this document was last updated, Cygwin 1.1.4 was current.
 
 B<NOTE:> At this point, minimal effort has been made to provide
 compatibility with old (beta) Cygwin releases.  The focus has been to
 provide a high quality release and not worry about working around old
-Cygwin bugs.  If you wish to use Perl with Cygwin B20.1 or earlier,
-consider using perl5.005_03, which is available in source and binary
-form at C<http://cygutils.netpedia.net/> or on the Cygwin CD.  If there
-is significant demand, a patch kit can be developed to port back to
-earlier Cygwin versions.
+bugs.  If you wish to use Perl with Cygwin B20.1 or earlier, consider
+using perl5.005_03, which is available in source and binary form at
+C<http://cygutils.netpedia.net/>.  If there is significant demand,
+a patch kit can be developed to port back to earlier Cygwin versions.
 
 =head2 Cygwin Configuration
 
@@ -49,11 +48,11 @@ that Perl builds cleanly.  These changes are B<not> required for normal
 Perl usage.
 
 B<NOTE:> The binaries that are built will run on all Win32 versions.
-They do not depend on your host system (Win9x, WinNT) or your Cygwin
-configuration (I<ntea>, I<ntsec>, binary/text mounts).  The only
-dependencies come from hard-coded pathnames like C</usr/local>.  However,
-your host system and Cygwin configuration will affect Perl's runtime
-behavior (see L</"TEST">).
+They do not depend on your host system (Win9x/WinME, WinNT/Win2K)
+or your Cygwin configuration (I<ntea>, I<ntsec>, binary/text mounts).
+The only dependencies come from hard-coded pathnames like C</usr/local>.
+However, your host system and Cygwin configuration will affect Perl's
+runtime behavior (see L</"TEST">).
 
 =over 4
 
@@ -72,7 +71,7 @@ Configure will B<not> prompt you to install I<man> pages.
 
 On WinNT with either the I<ntea> or I<ntsec> C<CYGWIN> settings, directory
 and file permissions may not be set correctly.  Since the build process
-creates files and directories, to be safe you may want to run a `C<chmod
+creates directories and files, to be safe you may want to run a `C<chmod
 -R +w *>' on the entire Perl source tree.
 
 Also, it is a well known WinNT "feature" that files created by a login
@@ -125,7 +124,10 @@ C<http://cygutils.netpedia.net/>.
 
 =item * C<-lcrypt>
 
-The crypt libraries in GNU libc have been ported to Cygwin.
+The crypt package distributed with Cygwin is a Linux compatible 56-bit
+DES crypt port by Corinna Vinschen.
+
+Alternatively, the crypt libraries in GNU libc have been ported to Cygwin.
 
 The DES based Ultra Fast Crypt port was done by Alexey Truhan:
 
@@ -138,22 +140,21 @@ The MD5 port was done by Andy Piper:
 
   ftp://ftp.franken.de/pub/win32/develop/gnuwin32/cygwin/porters/Okhapkin_Sergey/libcrypt.tgz
 
-There is also a Linux compatible 56 bit DES crypt port by Corinna
-Vinschen:
-
-  ftp://ftp.franken.de/pub/win32/develop/gnuwin32/cygwin/porters/Vinschen_Corinna/V1.1.1/crypt-1.0.tar.gz
-
 =item * C<-lgdbm> (C<use GDBM_File>)
 
 GDBM is available for Cygwin.  GDBM's ndbm/dbm compatibility feature
 also makes C<NDBM_File> and C<ODBM_File> possible (although they add
 little extra value).
 
+NOTE: The ndbm/dbm emulations only completely work on NTFS partitions.
+
 =item * C<-ldb> (C<use DB_File>)
 
 BerkeleyDB is available for Cygwin.  Some details can be found in
 F<ext/DB_File/DB_File.pm>.
 
+NOTE: The BerkeleyDB library only completely works on NTFS partitions.
+
 =item * C<-lcygipc> (C<use IPC::SysV>)
 
 A port of SysV IPC is available for Cygwin.
@@ -224,18 +225,6 @@ You may see some messages during Configure that seem suspicious.
 
 =over 4
 
-=item * Whoa There
-
-Cygwin does not yet implement chroot() functionality, but has a stub
-function that returns C<ENOSYS>.  You will see a message when Configure
-detects that its guess conflicts with the hint file.
-
-  *** WHOA THERE!!! ***
-      The recommended value for $d_chroot on this machine was "undef"!
-      Keep the recommended value? [y]
-
-You should keep the recommended value.
-
 =item * I<dlsym()>
 
 I<ld2> is needed to build dynamic libraries, but it does not exist
@@ -297,8 +286,8 @@ Warnings like these are normal:
   warning: overriding commands for target <file>
   warning: ignoring old commands for target <file>
 
-  Warning: no export definition file provided
-  dllwrap will create one, but may not be what you want
+  dllwrap: no export definition file provided
+  dllwrap: creating one, but that may not be what you want
 
 =head2 ld2
 
@@ -326,8 +315,8 @@ running as `C<./perl harness>'.
 Test results vary depending on your host system and your Cygwin
 configuration.  If a test can pass in some Cygwin setup, it is always
 attempted and explainable test failures are documented.  It is possible
-that Perl will pass all the tests, but it is more likely that some tests
-will fail for one of these reasons.
+for Perl to pass all the tests, but it is more likely that some tests
+will fail for one of the reasons listed below.
 
 =head2 File Permissions
 
@@ -360,7 +349,7 @@ these options, these tests will fail:
 FAT partitions do not support hard links (whereas NTFS does), in which
 case Cygwin implements link() by copying the file.  On remote (network)
 drives Cygwin's stat() always sets C<st_nlink> to 1, so the link count
-for remote directories and files is not available.  In both cases,
+for remote directories and files is not available.  In either case,
 these tests will fail:
 
   Failed Test           List of failed
@@ -389,7 +378,7 @@ the system with messages like:
     A required .DLL file, CYGWIN1.DLL, was not found
 
   WinNT
-    perl.exe or sh.exe - Unable to Locate DLL
+    perl.exe - Unable to Locate DLL
     The dynamic link library cygwin1.dll could not be found in the
       specified path ...
 
@@ -404,7 +393,7 @@ will fail:
 Alternatively, you can copy F<cygwin1.dll> into the directory where the
 tests run:
 
-  cp `type -p cygwin1.dll` t
+  cp /bin/cygwin1.dll t
 
 or one of the Windows system directories (although, this is B<not>
 recommended).
@@ -439,9 +428,9 @@ printable characters except these:
 
   : * ? " < > |
 
-File names are case insensitive, but case preserving.  A pathname
-that contains a backslash is a Win32 pathname (and not subject to the
-translations applied to POSIX style pathnames).
+File names are case insensitive, but case preserving.  A pathname that
+contains a backslash or drive letter is a Win32 pathname (and not subject
+to the translations applied to POSIX style pathnames).
 
 =item * Text/Binary
 
@@ -480,6 +469,9 @@ returns C<ENOSYS>.
 
 Win9x can not rename() an open file (although WinNT can).
 
+The Cygwin chroot() implementation has holes (it can not restrict file
+access by native Win32 programs).
+
 =back
 
 =head1 INSTALL
@@ -580,12 +572,17 @@ be kept as clean as possible.
 
 When I<make> starts, it warns about overriding commands for F<perlmain.o>.
 
-`C<make clean>' does not remove library F<.def> and F<.exe.stackdump>
+`C<make clean>' does not remove library F<.def> or F<.exe.stackdump>
 files.
 
 The I<ld2> script contains references to the source directory.  You should
 change these to $installbin after `C<make install>'.
 
+Support for swapping real and effective user and group IDs is incomplete.
+On WinNT Cygwin provides setuid(), seteuid(), setgid() and setegid().
+However, additional Cygwin calls for manipulating WinNT access tokens
+and security contexts are required.
+
 =head1 AUTHORS
 
 Charles Wilson <cwilson@ece.gatech.edu>,
@@ -597,4 +594,4 @@ Teun Burgers <burgers@ecn.nl>.
 
 =head1 HISTORY
 
-Last updated: 20 June 2000
+Last updated: 10 August 2000
index 47c2092..1fbe5a6 100644 (file)
@@ -35,9 +35,6 @@ ld='ld2'
 # - perl malloc needs to be unpolluted
 bincompat5005='undef'
 
-# stubs (ENOSYS, not implemented)
-d_chroot='undef'
-
 # Win9x problem with non-blocking read from a closed pipe
 d_eofnblk='define'