dt-bindings: usb: smsc,usb3503: Add usb3803

Add support for usb3803, compared to usb3503 it uses a regular USB
connection to upstream instead of HSIC, it has an additional
low power mode (bypass) and an additional control signal (BYPASS_N).

In bypass mode the downstream port 3 is connected to the upstream port
with low switch resistance R_on.

Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230313165039.255579-2-francesco@dolcini.it
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/Documentation/devicetree/bindings/usb/smsc,usb3503.yaml b/Documentation/devicetree/bindings/usb/smsc,usb3503.yaml
index a09f452..6156dc2 100644 (file)
--- a/Documentation/devicetree/bindings/usb/smsc,usb3503.yaml
+++ b/Documentation/devicetree/bindings/usb/smsc,usb3503.yaml
@@ -14,6 +14,7 @@ properties:
     enum:
       - smsc,usb3503
       - smsc,usb3503a
+      - smsc,usb3803
 
   reg:
     maxItems: 1
@@ -33,6 +34,12 @@ properties:
     description: >
       GPIO for reset
 
+  bypass-gpios:
+    maxItems: 1
+    description: >
+      GPIO for bypass.
+      Control signal to select between HUB MODE and BYPASS MODE.
+
   disabled-ports:
     $ref: /schemas/types.yaml#/definitions/uint32-array
     minItems: 1
@@ -46,9 +53,10 @@ properties:
 
   initial-mode:
     $ref: /schemas/types.yaml#/definitions/uint32
-    enum: [1, 2]
     description: >
-      Specifies initial mode. 1 for Hub mode, 2 for standby mode.
+      Specifies initial mode. 1 for Hub mode, 2 for standby mode and 3 for bypass mode.
+      In bypass mode the downstream port 3 is connected to the upstream port with low
+      switch resistance R_on.
 
   clocks:
     maxItems: 1
@@ -71,6 +79,29 @@ properties:
 required:
   - compatible
 
+allOf:
+  - if:
+      not:
+        properties:
+          compatible:
+            enum:
+              - smsc,usb3803
+    then:
+      properties:
+        bypass-gpios: false
+
+  - if:
+      required:
+        - bypass-gpios
+    then:
+      properties:
+        initial-mode:
+          enum: [1, 2, 3]
+    else:
+      properties:
+        initial-mode:
+          enum: [1, 2]
+
 additionalProperties: false
 
 examples:
@@ -93,6 +124,25 @@ examples:
       };
 
   - |
+      i2c {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          usb-hub@8 {
+              compatible = "smsc,usb3803";
+              reg = <0x08>;
+              connect-gpios = <&gpx3 0 1>;
+              disabled-ports = <2 3>;
+              intn-gpios = <&gpx3 4 1>;
+              reset-gpios = <&gpx3 5 1>;
+              bypass-gpios = <&gpx3 6 1>;
+              initial-mode = <3>;
+              clocks = <&clks 80>;
+              clock-names = "refclk";
+          };
+      };
+
+  - |
       #include <dt-bindings/gpio/gpio.h>
 
       usb-hub {