drivers/net/wireless/b43: fix sparse warnings: make symbols static

Fix this sparse warnings:

  drivers/net/wireless/b43/phy_a.c:80:6: warning: symbol 'b43_radio_set_tx_iq' was not declared. Should it be static?
  drivers/net/wireless/b43/phy_a.c:150:6: warning: symbol 'b43_radio_init2060' was not declared. Should it be static?
  drivers/net/wireless/b43/phy_g.c:57:10: warning: symbol 'b43_radio_channel_codes_bg' was not declared. Should it be static?
  drivers/net/wireless/b43/phy_g.c:218:6: warning: symbol 'b43_set_txpower_g' was not declared. Should it be static?
  drivers/net/wireless/b43/phy_g.c:386:6: warning: symbol 'b43_nrssi_hw_write' was not declared. Should it be static?
  drivers/net/wireless/b43/phy_g.c:393:5: warning: symbol 'b43_nrssi_hw_read' was not declared. Should it be static?
  drivers/net/wireless/b43/phy_g.c:404:6: warning: symbol 'b43_nrssi_hw_update' was not declared. Should it be static?
  drivers/net/wireless/b43/phy_g.c:418:6: warning: symbol 'b43_nrssi_mem_update' was not declared. Should it be static?
  drivers/net/wireless/b43/phy_g.c:592:6: warning: symbol 'b43_calc_nrssi_slope' was not declared. Should it be static?
  drivers/net/wireless/b43/phy_g.c:1357:5: warning: symbol 'b43_radio_init2050' was not declared. Should it be static?

Signed-off-by: Hannes Eder <hannes@hanneseder.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/wireless/b43/phy_a.c b/drivers/net/wireless/b43/phy_a.c
index 0f1a84c..7fe9d17 100644 (file)
--- a/drivers/net/wireless/b43/phy_a.c
+++ b/drivers/net/wireless/b43/phy_a.c
@@ -77,7 +77,7 @@ static s8 b43_aphy_estimate_power_out(struct b43_wldev *dev, s8 tssi)
 }
 #endif
 
-void b43_radio_set_tx_iq(struct b43_wldev *dev)
+static void b43_radio_set_tx_iq(struct b43_wldev *dev)
 {
        static const u8 data_high[5] = { 0x00, 0x40, 0x80, 0x90, 0xD0 };
        static const u8 data_low[5] = { 0x00, 0x01, 0x05, 0x06, 0x0A };
@@ -147,7 +147,7 @@ static void aphy_channel_switch(struct b43_wldev *dev, unsigned int channel)
 //FIXME        b43_phy_xmitpower(dev);
 }
 
-void b43_radio_init2060(struct b43_wldev *dev)
+static void b43_radio_init2060(struct b43_wldev *dev)
 {
        b43_radio_write16(dev, 0x0004, 0x00C0);
        b43_radio_write16(dev, 0x0005, 0x0008);

diff --git a/drivers/net/wireless/b43/phy_g.c b/drivers/net/wireless/b43/phy_g.c
index 3b1d673..caac4a4 100644 (file)
--- a/drivers/net/wireless/b43/phy_g.c
+++ b/drivers/net/wireless/b43/phy_g.c
@@ -54,7 +54,7 @@ static const s8 b43_tssi2dbm_g_table[] = {
        -20, -20, -20, -20,
 };
 
-const u8 b43_radio_channel_codes_bg[] = {
+static const u8 b43_radio_channel_codes_bg[] = {
        12, 17, 22, 27,
        32, 37, 42, 47,
        52, 57, 62, 67,
@@ -215,9 +215,9 @@ void b43_gphy_set_baseband_attenuation(struct b43_wldev *dev,
 }
 
 /* Adjust the transmission power output (G-PHY) */
-void b43_set_txpower_g(struct b43_wldev *dev,
-                      const struct b43_bbatt *bbatt,
-                      const struct b43_rfatt *rfatt, u8 tx_control)
+static void b43_set_txpower_g(struct b43_wldev *dev,
+                             const struct b43_bbatt *bbatt,
+                             const struct b43_rfatt *rfatt, u8 tx_control)
 {
        struct b43_phy *phy = &dev->phy;
        struct b43_phy_g *gphy = phy->g;
@@ -383,14 +383,14 @@ static void b43_set_original_gains(struct b43_wldev *dev)
 }
 
 /* http://bcm-specs.sipsolutions.net/NRSSILookupTable */
-void b43_nrssi_hw_write(struct b43_wldev *dev, u16 offset, s16 val)
+static void b43_nrssi_hw_write(struct b43_wldev *dev, u16 offset, s16 val)
 {
        b43_phy_write(dev, B43_PHY_NRSSILT_CTRL, offset);
        b43_phy_write(dev, B43_PHY_NRSSILT_DATA, (u16) val);
 }
 
 /* http://bcm-specs.sipsolutions.net/NRSSILookupTable */
-s16 b43_nrssi_hw_read(struct b43_wldev *dev, u16 offset)
+static s16 b43_nrssi_hw_read(struct b43_wldev *dev, u16 offset)
 {
        u16 val;
 
@@ -401,7 +401,7 @@ s16 b43_nrssi_hw_read(struct b43_wldev *dev, u16 offset)
 }
 
 /* http://bcm-specs.sipsolutions.net/NRSSILookupTable */
-void b43_nrssi_hw_update(struct b43_wldev *dev, u16 val)
+static void b43_nrssi_hw_update(struct b43_wldev *dev, u16 val)
 {
        u16 i;
        s16 tmp;
@@ -415,7 +415,7 @@ void b43_nrssi_hw_update(struct b43_wldev *dev, u16 val)
 }
 
 /* http://bcm-specs.sipsolutions.net/NRSSILookupTable */
-void b43_nrssi_mem_update(struct b43_wldev *dev)
+static void b43_nrssi_mem_update(struct b43_wldev *dev)
 {
        struct b43_phy_g *gphy = dev->phy.g;
        s16 i, delta;
@@ -589,7 +589,7 @@ static void b43_calc_nrssi_offset(struct b43_wldev *dev)
        b43_phy_write(dev, 0x0811, backup[1]);
 }
 
-void b43_calc_nrssi_slope(struct b43_wldev *dev)
+static void b43_calc_nrssi_slope(struct b43_wldev *dev)
 {
        struct b43_phy *phy = &dev->phy;
        struct b43_phy_g *gphy = phy->g;
@@ -1354,7 +1354,7 @@ struct init2050_saved_values {
        u16 phy_syncctl;
 };
 
-u16 b43_radio_init2050(struct b43_wldev *dev)
+static u16 b43_radio_init2050(struct b43_wldev *dev)
 {
        struct b43_phy *phy = &dev->phy;
        struct init2050_saved_values sav;