serial: 8250_pci: Replace dev_*() by pci_*() macros

PCI subsystem provides convenient shortcut macros for message printing.
Use those macros instead of dev_*().

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Jiri Slaby <jslaby@kernel.org>
Link: https://lore.kernel.org/r/20211022135147.70965-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index 463b2c7..aea1226 100644 (file)
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -75,13 +75,12 @@ static int pci_default_setup(struct serial_private*,
 
 static void moan_device(const char *str, struct pci_dev *dev)
 {
-       dev_err(&dev->dev,
-              "%s: %s\n"
+       pci_err(dev, "%s\n"
               "Please send the output of lspci -vv, this\n"
               "message (0x%04x,0x%04x,0x%04x,0x%04x), the\n"
               "manufacturer and name of serial board or\n"
               "modem board to <linux-serial@vger.kernel.org>.\n",
-              pci_name(dev), str, dev->vendor, dev->device,
+              str, dev->vendor, dev->device,
               dev->subsystem_vendor, dev->subsystem_device);
 }
 
@@ -238,7 +237,7 @@ static int pci_inteli960ni_init(struct pci_dev *dev)
        /* is firmware started? */
        pci_read_config_dword(dev, 0x44, &oldval);
        if (oldval == 0x00001000L) { /* RESET value */
-               dev_dbg(&dev->dev, "Local i960 firmware missing\n");
+               pci_dbg(dev, "Local i960 firmware missing\n");
                return -ENODEV;
        }
        return 0;
@@ -588,9 +587,8 @@ static int pci_timedia_probe(struct pci_dev *dev)
         * (0,2,3,5,6: serial only -- 7,8,9: serial + parallel)
         */
        if ((dev->subsystem_device & 0x00f0) >= 0x70) {
-               dev_info(&dev->dev,
-                       "ignoring Timedia subdevice %04x for parport_serial\n",
-                       dev->subsystem_device);
+               pci_info(dev, "ignoring Timedia subdevice %04x for parport_serial\n",
+                        dev->subsystem_device);
                return -ENODEV;
        }
 
@@ -827,8 +825,7 @@ static int pci_netmos_9900_numports(struct pci_dev *dev)
                if (sub_serports > 0)
                        return sub_serports;
 
-               dev_err(&dev->dev,
-                       "NetMos/Mostech serial driver ignoring port on ambiguous config.\n");
+               pci_err(dev, "NetMos/Mostech serial driver ignoring port on ambiguous config.\n");
                return 0;
        }
 
@@ -927,7 +924,7 @@ static int pci_ite887x_init(struct pci_dev *dev)
        }
 
        if (i == ARRAY_SIZE(inta_addr)) {
-               dev_err(&dev->dev, "ite887x: could not find iobase\n");
+               pci_err(dev, "could not find iobase\n");
                return -ENODEV;
        }
 
@@ -1022,9 +1019,7 @@ static int pci_endrun_init(struct pci_dev *dev)
        /* EndRun device */
        if (deviceID == 0x07000200) {
                number_uarts = ioread8(p + 4);
-               dev_dbg(&dev->dev,
-                       "%d ports detected on EndRun PCI Express device\n",
-                       number_uarts);
+               pci_dbg(dev, "%d ports detected on EndRun PCI Express device\n", number_uarts);
        }
        pci_iounmap(dev, p);
        return number_uarts;
@@ -1054,9 +1049,7 @@ static int pci_oxsemi_tornado_init(struct pci_dev *dev)
        /* Tornado device */
        if (deviceID == 0x07000200) {
                number_uarts = ioread8(p + 4);
-               dev_dbg(&dev->dev,
-                       "%d ports detected on Oxford PCI Express device\n",
-                       number_uarts);
+               pci_dbg(dev, "%d ports detected on Oxford PCI Express device\n", number_uarts);
        }
        pci_iounmap(dev, p);
        return number_uarts;
@@ -1116,15 +1109,15 @@ static struct quatech_feature quatech_cards[] = {
        { 0, }
 };
 
-static int pci_quatech_amcc(u16 devid)
+static int pci_quatech_amcc(struct pci_dev *dev)
 {
        struct quatech_feature *qf = &quatech_cards[0];
        while (qf->devid) {
-               if (qf->devid == devid)
+               if (qf->devid == dev->device)
                        return qf->amcc;
                qf++;
        }
-       pr_err("quatech: unknown port type '0x%04X'.\n", devid);
+       pci_err(dev, "unknown port type '0x%04X'.\n", dev->device);
        return 0;
 };
 
@@ -1287,7 +1280,7 @@ static int pci_quatech_rs422(struct uart_8250_port *port)
 
 static int pci_quatech_init(struct pci_dev *dev)
 {
-       if (pci_quatech_amcc(dev->device)) {
+       if (pci_quatech_amcc(dev)) {
                unsigned long base = pci_resource_start(dev, 0);
                if (base) {
                        u32 tmp;
@@ -1311,7 +1304,7 @@ static int pci_quatech_setup(struct serial_private *priv,
        port->port.uartclk = pci_quatech_clock(port);
        /* For now just warn about RS422 */
        if (pci_quatech_rs422(port))
-               pr_warn("quatech: software control of RS422 features not currently supported.\n");
+               pci_warn(priv->dev, "software control of RS422 features not currently supported.\n");
        return pci_default_setup(priv, board, port, idx);
 }
 
@@ -1521,7 +1514,7 @@ static int pci_fintek_setup(struct serial_private *priv,
        /* Get the io address from configuration space */
        pci_read_config_word(pdev, config_base + 4, &iobase);
 
-       dev_dbg(&pdev->dev, "%s: idx=%d iobase=0x%x", __func__, idx, iobase);
+       pci_dbg(pdev, "idx=%d iobase=0x%x", idx, iobase);
 
        port->port.iotype = UPIO_PORT;
        port->port.iobase = iobase;
@@ -1685,7 +1678,7 @@ static int skip_tx_en_setup(struct serial_private *priv,
                        struct uart_8250_port *port, int idx)
 {
        port->port.quirks |= UPQ_NO_TXEN_TEST;
-       dev_dbg(&priv->dev->dev,
+       pci_dbg(priv->dev,
                "serial8250: skipping TxEn test for device [%04x:%04x] subsystem [%04x:%04x]\n",
                priv->dev->vendor, priv->dev->device,
                priv->dev->subsystem_vendor, priv->dev->subsystem_device);
@@ -3994,12 +3987,12 @@ pciserial_init_ports(struct pci_dev *dev, const struct pciserial_board *board)
                uart.port.irq = 0;
        } else {
                if (pci_match_id(pci_use_msi, dev)) {
-                       dev_dbg(&dev->dev, "Using MSI(-X) interrupts\n");
+                       pci_dbg(dev, "Using MSI(-X) interrupts\n");
                        pci_set_master(dev);
                        uart.port.flags &= ~UPF_SHARE_IRQ;
                        rc = pci_alloc_irq_vectors(dev, 1, 1, PCI_IRQ_ALL_TYPES);
                } else {
-                       dev_dbg(&dev->dev, "Using legacy interrupts\n");
+                       pci_dbg(dev, "Using legacy interrupts\n");
                        rc = pci_alloc_irq_vectors(dev, 1, 1, PCI_IRQ_LEGACY);
                }
                if (rc < 0) {
@@ -4017,12 +4010,12 @@ pciserial_init_ports(struct pci_dev *dev, const struct pciserial_board *board)
                if (quirk->setup(priv, board, &uart, i))
                        break;
 
-               dev_dbg(&dev->dev, "Setup PCI port: port %lx, irq %d, type %d\n",
+               pci_dbg(dev, "Setup PCI port: port %lx, irq %d, type %d\n",
                        uart.port.iobase, uart.port.irq, uart.port.iotype);
 
                priv->line[i] = serial8250_register_8250_port(&uart);
                if (priv->line[i] < 0) {
-                       dev_err(&dev->dev,
+                       pci_err(dev,
                                "Couldn't register serial port %lx, irq %d, type %d, error %d\n",
                                uart.port.iobase, uart.port.irq,
                                uart.port.iotype, priv->line[i]);
@@ -4118,8 +4111,7 @@ pciserial_init_one(struct pci_dev *dev, const struct pci_device_id *ent)
        }
 
        if (ent->driver_data >= ARRAY_SIZE(pci_boards)) {
-               dev_err(&dev->dev, "invalid driver_data: %ld\n",
-                       ent->driver_data);
+               pci_err(dev, "invalid driver_data: %ld\n", ent->driver_data);
                return -EINVAL;
        }
 
@@ -4202,7 +4194,7 @@ static int pciserial_resume_one(struct device *dev)
                err = pci_enable_device(pdev);
                /* FIXME: We cannot simply error out here */
                if (err)
-                       dev_err(dev, "Unable to re-enable ports, trying to continue.\n");
+                       pci_err(pdev, "Unable to re-enable ports, trying to continue.\n");
                pciserial_resume_ports(priv);
        }
        return 0;