arm64: dts: imx8mm-beacon: Re-sync dts file with Linux 5.10-rc6

There have been some updates to the device trees, so re-sync.

Signed-off-by: Adam Ford <aford173@gmail.com>
Acked-by: Peng Fan <peng.fan@nxp.com>

diff --git a/arch/arm/dts/imx8mm-beacon-baseboard.dtsi b/arch/arm/dts/imx8mm-beacon-baseboard.dtsi
index baa5f99..d6b9ded 100644 (file)
--- a/arch/arm/dts/imx8mm-beacon-baseboard.dtsi
+++ b/arch/arm/dts/imx8mm-beacon-baseboard.dtsi
@@ -10,19 +10,19 @@
                led0 {
                        label = "gen_led0";
                        gpios = <&pca6416_1 4 GPIO_ACTIVE_HIGH>;
-                       default-state = "none";
+                       default-state = "off";
                };
 
                led1 {
                        label = "gen_led1";
                        gpios = <&pca6416_1 5 GPIO_ACTIVE_HIGH>;
-                       default-state = "none";
+                       default-state = "off";
                };
 
                led2 {
                        label = "gen_led2";
                        gpios = <&pca6416_1 6 GPIO_ACTIVE_HIGH>;
-                       default-state = "none";
+                       default-state = "off";
                };
 
                led3 {
@@ -70,7 +70,7 @@
 &ecspi2 {
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_espi2>;
-       cs-gpios = <&gpio5 9 0>;
+       cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
        status = "okay";
 
        eeprom@0 {
@@ -210,7 +210,7 @@
                >;
        };
 
-       pinctrl_pcal6414: pcal6414-gpio {
+       pinctrl_pcal6414: pcal6414-gpiogrp {
                fsl,pins = <
                        MX8MM_IOMUXC_SAI2_MCLK_GPIO4_IO27               0x19
                >;
@@ -240,7 +240,7 @@
                >;
        };
 
-       pinctrl_usdhc2_gpio: usdhc2grpgpio {
+       pinctrl_usdhc2_gpio: usdhc2gpiogrp {
                fsl,pins = <
                        MX8MM_IOMUXC_SD2_CD_B_USDHC2_CD_B       0x41
                        MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19     0x41
@@ -259,7 +259,7 @@
                >;
        };
 
-       pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
+       pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
                fsl,pins = <
                        MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x194
                        MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4
@@ -271,7 +271,7 @@
                >;
        };
 
-       pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
+       pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
                fsl,pins = <
                        MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x196
                        MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6

diff --git a/arch/arm/dts/imx8mm-beacon-som.dtsi b/arch/arm/dts/imx8mm-beacon-som.dtsi
index 801bd02..b88c3c9 100644 (file)
--- a/arch/arm/dts/imx8mm-beacon-som.dtsi
+++ b/arch/arm/dts/imx8mm-beacon-som.dtsi
@@ -24,6 +24,26 @@
        cpu-supply = <&buck2_reg>;
 };
 
+&ddrc {
+       operating-points-v2 = <&ddrc_opp_table>;
+
+       ddrc_opp_table: opp-table {
+               compatible = "operating-points-v2";
+
+               opp-25M {
+                       opp-hz = /bits/ 64 <25000000>;
+               };
+
+               opp-100M {
+                       opp-hz = /bits/ 64 <100000000>;
+               };
+
+               opp-750M {
+                       opp-hz = /bits/ 64 <750000000>;
+               };
+       };
+};
+
 &fec1 {
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_fec1>;
@@ -52,9 +72,10 @@
        pmic@4b {
                compatible = "rohm,bd71847";
                reg = <0x4b>;
+               pinctrl-names = "default";
                pinctrl-0 = <&pinctrl_pmic>;
                interrupt-parent = <&gpio1>;
-               interrupts = <3 GPIO_ACTIVE_LOW>;
+               interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
                rohm,reset-snvs-powered;
 
                regulators {
@@ -116,7 +137,7 @@
 
                        ldo1_reg: LDO1 {
                                regulator-name = "ldo1";
-                               regulator-min-microvolt = <3000000>;
+                               regulator-min-microvolt = <1600000>;
                                regulator-max-microvolt = <3300000>;
                                regulator-boot-on;
                                regulator-always-on;
@@ -124,7 +145,7 @@
 
                        ldo2_reg: LDO2 {
                                regulator-name = "ldo2";
-                               regulator-min-microvolt = <900000>;
+                               regulator-min-microvolt = <800000>;
                                regulator-max-microvolt = <900000>;
                                regulator-boot-on;
                                regulator-always-on;
@@ -164,7 +185,7 @@
        status = "okay";
 
        eeprom@50 {
-               compatible = "microchip, at24c64d", "atmel,24c64";
+               compatible = "microchip,24c64", "atmel,24c64";
                pagesize = <32>;
                read-only;      /* Manufacturing EEPROM programmed at factory */
                reg = <0x50>;
@@ -190,6 +211,7 @@
                host-wakeup-gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>;
                device-wakeup-gpios = <&gpio2 7 GPIO_ACTIVE_HIGH>;
                clocks = <&osc_32k>;
+               max-speed = <4000000>;
                clock-names = "extclk";
        };
 };
@@ -270,9 +292,9 @@
                        >;
                };
 
-               pinctrl_pmic: pmicirq {
+               pinctrl_pmic: pmicirqgrp {
                        fsl,pins = <
-                               MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3               0x41
+                               MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3       0x141
                        >;
                };
 
@@ -289,7 +311,7 @@
                        >;
                };
 
-               pinctrl_usdhc1_gpio: usdhc1grpgpio {
+               pinctrl_usdhc1_gpio: usdhc1gpiogrp {
                        fsl,pins = <
                                MX8MM_IOMUXC_SD1_RESET_B_GPIO2_IO10     0x41
                        >;
@@ -306,7 +328,7 @@
                        >;
                };
 
-               pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+               pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
                        fsl,pins = <
                                MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK         0x194
                                MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD         0x1d4
@@ -317,7 +339,7 @@
                        >;
                };
 
-               pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+               pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
                        fsl,pins = <
                                MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK         0x196
                                MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD         0x1d6
@@ -344,7 +366,7 @@
                        >;
                };
 
-               pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+               pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
                        fsl,pins = <
                                MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK               0x194
                                MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD               0x1d4
@@ -360,7 +382,7 @@
                        >;
                };
 
-               pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+               pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
                        fsl,pins = <
                                MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK               0x196
                                MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD               0x1d6