qlcnic: fix beacon and LED test.

o Updated version number to 5.0.25

o Do not hold onto RESETTING_BIT for entire duration of LED/ beacon test.
  Instead, just checking for RESETTING_BIT not set before sending config_led
  command down to card.

o Take rtnl_lock instead of RESETTING_BIT for beacon test while sending
  config_led command down to make sure interface cannot be brought up/ down.

o Allocate and free resources if interface is down before
  sending the config_led command. This is to make sure config_led
  command sending doesn't fail.

o Clear QLCNIC_LED_ENABLE bit if beacon/ LED test fails to start.

Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h
index 2fd1ba8..7ed53db 100644 (file)
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h
@@ -36,8 +36,8 @@
 
 #define _QLCNIC_LINUX_MAJOR 5
 #define _QLCNIC_LINUX_MINOR 0
-#define _QLCNIC_LINUX_SUBVERSION 24
-#define QLCNIC_LINUX_VERSIONID  "5.0.24"
+#define _QLCNIC_LINUX_SUBVERSION 25
+#define QLCNIC_LINUX_VERSIONID  "5.0.25"
 #define QLCNIC_DRV_IDC_VER  0x01
 #define QLCNIC_DRIVER_VERSION  ((_QLCNIC_LINUX_MAJOR << 16) |\
                 (_QLCNIC_LINUX_MINOR << 8) | (_QLCNIC_LINUX_SUBVERSION))

diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c
index 5d8bec2..8aa1c6e 100644 (file)
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c
@@ -935,31 +935,49 @@ static int qlcnic_set_led(struct net_device *dev,
 {
        struct qlcnic_adapter *adapter = netdev_priv(dev);
        int max_sds_rings = adapter->max_sds_rings;
+       int err = -EIO, active = 1;
+
+       if (adapter->op_mode == QLCNIC_NON_PRIV_FUNC) {
+               netdev_warn(dev, "LED test not supported for non "
+                               "privilege function\n");
+               return -EOPNOTSUPP;
+       }
 
        switch (state) {
        case ETHTOOL_ID_ACTIVE:
                if (test_and_set_bit(__QLCNIC_LED_ENABLE, &adapter->state))
                        return -EBUSY;
 
-               if (!test_bit(__QLCNIC_DEV_UP, &adapter->state)) {
-                       if (test_and_set_bit(__QLCNIC_RESETTING, &adapter->state))
-                               return -EIO;
+               if (test_bit(__QLCNIC_RESETTING, &adapter->state))
+                       break;
 
-                       if (qlcnic_diag_alloc_res(dev, QLCNIC_LED_TEST)) {
-                               clear_bit(__QLCNIC_RESETTING, &adapter->state);
-                               return -EIO;
-                       }
+               if (!test_bit(__QLCNIC_DEV_UP, &adapter->state)) {
+                       if (qlcnic_diag_alloc_res(dev, QLCNIC_LED_TEST))
+                               break;
                        set_bit(__QLCNIC_DIAG_RES_ALLOC, &adapter->state);
                }
 
-               if (adapter->nic_ops->config_led(adapter, 1, 0xf) == 0)
-                       return 0;
+               if (adapter->nic_ops->config_led(adapter, 1, 0xf) == 0) {
+                       err = 0;
+                       break;
+               }
 
                dev_err(&adapter->pdev->dev,
                        "Failed to set LED blink state.\n");
                break;
 
        case ETHTOOL_ID_INACTIVE:
+               active = 0;
+
+               if (test_bit(__QLCNIC_RESETTING, &adapter->state))
+                       break;
+
+               if (!test_bit(__QLCNIC_DEV_UP, &adapter->state)) {
+                       if (qlcnic_diag_alloc_res(dev, QLCNIC_LED_TEST))
+                               break;
+                       set_bit(__QLCNIC_DIAG_RES_ALLOC, &adapter->state);
+               }
+
                if (adapter->nic_ops->config_led(adapter, 0, 0xf))
                        dev_err(&adapter->pdev->dev,
                                "Failed to reset LED blink state.\n");
@@ -970,14 +988,13 @@ static int qlcnic_set_led(struct net_device *dev,
                return -EINVAL;
        }
 
-       if (test_and_clear_bit(__QLCNIC_DIAG_RES_ALLOC, &adapter->state)) {
+       if (test_and_clear_bit(__QLCNIC_DIAG_RES_ALLOC, &adapter->state))
                qlcnic_diag_free_res(dev, max_sds_rings);
-               clear_bit(__QLCNIC_RESETTING, &adapter->state);
-       }
 
-       clear_bit(__QLCNIC_LED_ENABLE, &adapter->state);
+       if (!active || err)
+               clear_bit(__QLCNIC_LED_ENABLE, &adapter->state);
 
-       return -EIO;
+       return err;
 }
 
 static void

diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
index 2edffce..0bd1638 100644 (file)
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
@@ -3504,11 +3504,16 @@ qlcnic_store_beacon(struct device *dev,
 {
        struct qlcnic_adapter *adapter = dev_get_drvdata(dev);
        int max_sds_rings = adapter->max_sds_rings;
-       int dev_down = 0;
        u16 beacon;
        u8 b_state, b_rate;
        int err;
 
+       if (adapter->op_mode == QLCNIC_NON_PRIV_FUNC) {
+               dev_warn(dev, "LED test not supported for non "
+                               "privilege function\n");
+               return -EOPNOTSUPP;
+       }
+
        if (len != sizeof(u16))
                return QL_STATUS_INVALID_PARAM;
 
@@ -3520,36 +3525,40 @@ qlcnic_store_beacon(struct device *dev,
        if (adapter->ahw->beacon_state == b_state)
                return len;
 
+       rtnl_lock();
+
        if (!adapter->ahw->beacon_state)
-               if (test_and_set_bit(__QLCNIC_LED_ENABLE, &adapter->state))
+               if (test_and_set_bit(__QLCNIC_LED_ENABLE, &adapter->state)) {
+                       rtnl_unlock();
                        return -EBUSY;
+               }
+
+       if (test_bit(__QLCNIC_RESETTING, &adapter->state)) {
+               err = -EIO;
+               goto out;
+       }
 
        if (!test_bit(__QLCNIC_DEV_UP, &adapter->state)) {
-               if (test_and_set_bit(__QLCNIC_RESETTING, &adapter->state))
-                       return -EIO;
                err = qlcnic_diag_alloc_res(adapter->netdev, QLCNIC_LED_TEST);
-               if (err) {
-                       clear_bit(__QLCNIC_RESETTING, &adapter->state);
-                       clear_bit(__QLCNIC_LED_ENABLE, &adapter->state);
-                       return err;
-               }
-               dev_down = 1;
+               if (err)
+                       goto out;
+               set_bit(__QLCNIC_DIAG_RES_ALLOC, &adapter->state);
        }
 
        err = qlcnic_config_led(adapter, b_state, b_rate);
 
        if (!err) {
-               adapter->ahw->beacon_state = b_state;
                err = len;
+               adapter->ahw->beacon_state = b_state;
        }
 
-       if (dev_down) {
+       if (test_and_clear_bit(__QLCNIC_DIAG_RES_ALLOC, &adapter->state))
                qlcnic_diag_free_res(adapter->netdev, max_sds_rings);
-               clear_bit(__QLCNIC_RESETTING, &adapter->state);
-       }
 
-       if (!b_state)
+ out:
+       if (!adapter->ahw->beacon_state)
                clear_bit(__QLCNIC_LED_ENABLE, &adapter->state);
+       rtnl_unlock();
 
        return err;
 }