ARM: dts: am57xx-idk: Support VBUS detection on USB2 port
authorRoger Quadros <rogerq@ti.com>
Mon, 12 Dec 2016 09:58:04 +0000 (11:58 +0200)
committerTony Lindgren <tony@atomide.com>
Tue, 27 Dec 2016 18:06:00 +0000 (10:06 -0800)
VBUS detection is available on the board via the palmas PMIC.
Use extcon-palmas driver instead of extcon-gpio-usb driver.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
arch/arm/boot/dts/am571x-idk.dts
arch/arm/boot/dts/am572x-idk.dts
arch/arm/boot/dts/am57xx-idk-common.dtsi

index d6e43e5..ad68d1e 100644 (file)
                        linux,default-trigger = "mmc0";
                };
        };
-
-       extcon_usb2: extcon_usb2 {
-            compatible = "linux,extcon-usb-gpio";
-            id-gpio = <&gpio5 7 GPIO_ACTIVE_HIGH>;
-       };
 };
 
 &mmc1 {
@@ -79,3 +74,8 @@
 &omap_dwc3_2 {
        extcon = <&extcon_usb2>;
 };
+
+&extcon_usb2 {
+       id-gpio = <&gpio5 7 GPIO_ACTIVE_HIGH>;
+       vbus-gpio = <&gpio7 22 GPIO_ACTIVE_HIGH>;
+};
index 27d9149..4ed40be 100644 (file)
                reg = <0x0 0x80000000 0x0 0x80000000>;
        };
 
-       extcon_usb2: extcon_usb2 {
-               compatible = "linux,extcon-usb-gpio";
-               id-gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>;
-       };
-
        status-leds {
                compatible = "gpio-leds";
                cpu0-led {
        extcon = <&extcon_usb2>;
 };
 
+&extcon_usb2 {
+       id-gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>;
+       vbus-gpio = <&gpio3 26 GPIO_ACTIVE_HIGH>;
+};
+
 &mmc1 {
        status = "okay";
        vmmc-supply = <&v3_3d>;
index 555ae21..14bdb24 100644 (file)
                        gpio-controller;
                        #gpio-cells = <2>;
                };
+
+               extcon_usb2: tps659038_usb {
+                       compatible = "ti,palmas-usb-vid";
+                       ti,enable-vbus-detection;
+                       ti,enable-id-detection;
+                       /* ID & VBUS GPIOs provided in board dts */
+               };
        };
 };