rename usefull64bits to use64bitall.
p4raw-id: //depot/cfgperl@5261
# $Id: Head.U,v 3.0.1.9 1997/02/28 15:02:09 ram Exp $
#
-# Generated on Sat Feb 26 00:48:15 EET 2000 [metaconfig 3.0 PL70]
+# Generated on Sat Feb 26 04:42:42 EET 2000 [metaconfig 3.0 PL70]
# (with additional metaconfig patches by perlbug@perl.com)
cat >/tmp/c1$$ <<EOF
uidsize=''
uidtype=''
archname64=''
-use64bits=''
-usefull64bits=''
+use64bitall=''
+use64bitint=''
uselargefiles=''
uselongdouble=''
usemorebits=''
+# Backward compatibility (uselfs is deprecated).
+case "$uselfs" in
+"$define"|true|[yY]*)
+ cat <<EOM >&4
+
+*** Configure -Duselfs is deprecated, using -Duselargefiles instead.
+
+EOM
+ uselargefiles="$define"
+ ;;
+esac
+
case "$lseeksize:$fpossize" in
8:8) cat <<EOM
case "$usemorebits" in
"$define"|true|[yY]*)
- use64bits="$define"
+ use64bitint="$define"
uselongdouble="$define"
usemorebits="$define"
;;
"$define"|true|[yY]*)
cat <<EOM >&4
-*** Configure -Duselonglong is deprecated, using the -Duse64bits instead.
+*** Configure -Duselonglong is deprecated, using -Duse64bitint instead.
+
+EOM
+ use64bitint="$define"
+ ;;
+esac
+# Backward compatibility (use64bits is deprecated).
+case "$use64bits" in
+"$define"|true|[yY]*)
+ cat <<EOM >&4
+
+*** Configure -Duse64bits is deprecated, using -Duse64bitint instead.
EOM
- use64bits="$define"
+ use64bitint="$define"
;;
esac
+# Thinko compatibility
+case "$use64bitints" in
+"$define"|true|[yY]*)
+ cat <<EOM >&4
+
+*** There is no Configure -Duse64bitints, using -Duse64bitint instead.
+
+EOM
+ use64bitint="$define"
+ ;;
+esac
+
case "$ccflags" in
-*-DUSE_LONG_LONG*|*-DUSE_64_BITS*|*-DUSE_FULL_64_BITS*) use64bits="$define";;
+*-DUSE_LONG_LONG*|*-DUSE_64_BIT_INT*|*-DUSE_64_BIT_ALL*) use64bitint="$define";;
esac
-case "$usefull64bits" in
-"$define"|true|[yY]*) use64bits="$define" ;;
+case "$use64bitall" in
+"$define"|true|[yY]*) use64bitint="$define" ;;
esac
case "$longsize" in
EOM
val="$define"
;;
-*) case "$use64bits" in
+*) case "$use64bitint" in
"$define"|true|[yY]*) dflt='y';;
*) dflt='n';;
esac
cat <<EOM
Perl can be built to take advantage of 64-bit integer types
-on some systems. To do so, Configure can be run with -Duse64bits.
+on some systems. To do so, Configure can be run with -Duse64bitint.
Choosing this option will most probably introduce binary incompatibilities.
If this doesn't make any sense to you, just accept the default '$dflt'.
esac
;;
esac
-set use64bits
+set use64bitint
eval $setvar
-case "$usefull64bits" in
+case "$use64bitall" in
"$define"|true|[yY]*) val="$define" ;;
-*) case "$use64bits" in
+*) case "$use64bitint" in
"$define") case "$longsize" in
4) dflt='n'
cat <<EOM
esac
;;
esac
-set usefull64bits
+set use64bitall
eval $setvar
-case "$use64bits" in
+case "$use64bitint" in
"$define"|true|[yY]*)
: Look for a hint-file generated 'call-back-unit'. If the
: user has specified that a 64-bit perl is to be built,
: we may need to set or change some other defaults.
- if $test -f use64bits.cbu; then
+ if $test -f use64bitint.cbu; then
echo "Your platform has some specific hints for 64-bit builds, using them..."
- . ./use64bits.cbu
+ . ./use64bitint.cbu
fi
case "$longsize" in
4) case "$ccflags" in
- *-DUSE_64_BITS*) ;;
- *) ccflags="$ccflags -DUSE_64_BITS";;
+ *-DUSE_64_BIT_INT*) ;;
+ *) ccflags="$ccflags -DUSE_64_BIT_INT";;
esac
case "$archname64" in
- '') archname64=64 ;;
+ '') archname64=64int ;;
esac
;;
esac
;;
esac
-case "$usefull64bits" in
+case "$use64bitall" in
"$define"|true|[yY]*)
: Look for a hint-file generated 'call-back-unit'. If the
: user has specified that a full 64-bit perl is to be built,
: we may need to set or change some other defaults.
- if $test -f usefull64bits.cbu; then
+ if $test -f use64bitall.cbu; then
echo "Your platform has some specific hints for full 64-bit builds, using them..."
- . ./usefull64bits.cbu
+ . ./use64bitall.cbu
fi
case "$longsize" in
4) case "$ccflags" in
- *-DUSE_FULL_64_BITS*) ;;
- *) ccflags="$ccflags -DUSE_FULL_64_BITS";;
+ *-DUSE_64_BIT_ALL*) ;;
+ *) ccflags="$ccflags -DUSE_64_BIT_ALL";;
esac
case "$archname64" in
- ''|64) archname64=full64 ;;
+ ''|64) archname64=64all ;;
esac
;;
esac
esac
;;
esac
-case "$use64bits" in
+case "$use64bitint" in
$define)
case "$archname64" in
'')
'') echo "Alas, no 64-bit integer types in sight." >&4
d_quad="$undef"
;;
-*) if test X"$use64bits" = Xdefine -o X"$longsize" = X8; then
+*) if test X"$use64bitint" = Xdefine -o X"$longsize" = X8; then
verb="will"
else
verb="could"
echo " "
$echo "Choosing the C types to be used for Perl's internal types..." >&4
-case "$use64bits:$d_quad:$quadtype" in
+case "$use64bitint:$d_quad:$quadtype" in
define:define:?*)
ivtype="$quadtype"
uvtype="$uquadtype"
'') try="extern int accept(int, struct sockaddr *, $xxx *);"
if ./protochk "$try" $hdrs; then
echo "Your system accepts '$xxx *' for the last argument of accept()."
- socksizetype="$xxx *"
+ socksizetype="$xxx"
fi
;;
esac
: In case none of those worked, prompt the user.
case "$socksizetype" in
'') rp='What is the type for the last argument to accept()?'
- dflt='int *'
+ dflt='int'
. ./myread
socksizetype=$ans
;;
esac
;;
-*) : no gethostbyaddr, so pick relatively harmless defaults
+*) : no sockets, so pick relatively harmless defaults
socksizetype='char *'
;;
esac
NDBM_File|ndbm_fil)
case "$i_ndbm" in
$define)
- case "$osname-$use64bits" in
+ case "$osname-$use64bitint" in
hpux-define)
case "$libs" in
*-lndbm*) avail_ext="$avail_ext $xxx" ;;
ODBM_File|odbm_fil)
case "${i_dbm}${i_rpcsvcdbm}" in
*"${define}"*)
- case "$osname-$use64bits" in
+ case "$osname-$use64bitint" in
hpux-define)
case "$libs" in
*-ldbm*) avail_ext="$avail_ext $xxx" ;;
uniq='$uniq'
uquadtype='$uquadtype'
use5005threads='$use5005threads'
-use64bits='$use64bits'
+use64bitall='$use64bitall'
+use64bitint='$use64bitint'
usedl='$usedl'
-usefull64bits='$usefull64bits'
useithreads='$useithreads'
uselargefiles='$uselargefiles'
uselongdouble='$uselongdouble'
and indicates that Perl should be built to use the 5.005-based
threading implementation.
-use64bits (use64bits.U):
- This variable conditionally defines the USE_64_BITS symbol,
+use64bitall (use64bits.U):
+ This variable conditionally defines the USE_64_BIT_ALL symbol,
+ and indicates that 64-bit integer types should be used
+ when available. The maximal possible
+ 64-bitness is employed: LP64 or ILP64, meaning that you will
+ be able to use more than 2 gigabytes of memory. This mode is
+ even more binary incompatible than USE_64_BIT_INT. You may not
+ be able to run the resulting executable in a 32-bit CPU at all or
+ you may need at least to reboot your OS to 64-bit mode.
+
+use64bitint (use64bits.U):
+ This variable conditionally defines the USE_64_BIT_INT symbol,
and indicates that 64-bit integer types should be used
when available. The minimal possible 64-bitness
is employed, just enough to get 64-bit integers into Perl.
This variable indicates if the system supports dynamic
loading of some sort. See also dlsrc and dlobj.
-usefull64bits (use64bits.U):
- This variable conditionally defines the USE_FULL_64_BITS symbol,
- and indicates that 64-bit integer types should be used
- when available. The maximal possible
- 64-bitness is employed: LP64 or ILP64, meaning that you will
- be able to use more than 2 gigabytes of memory. This mode is
- even more binary incompatible than USE_64_BITS. You may not
- be able to run the resulting executable in a 32-bit CPU at all or
- you may need at least to reboot your OS to 64-bit mode.
-
useithreads (usethreads.U):
This variable conditionally defines the USE_ITHREADS symbol,
and indicates that Perl should be built to use the interpreter-based
# Package name : perl5
# Source directory : .
-# Configuration time: Sat Feb 26 00:49:19 EET 2000
+# Configuration time: Sat Feb 26 03:04:10 EET 2000
# Configured by : jhi
# Target system : osf1 alpha.hut.fi v4.0 878 alpha
ccsymbols='__alpha=1 __LANGUAGE_C__=1 __osf__=1 __unix__=1 _LONGLONG=1 _SYSTYPE_BSD=1 SYSTYPE_BSD=1 unix=1'
cf_by='jhi'
cf_email='yourname@yourhost.yourplace.com'
-cf_time='Sat Feb 26 00:49:19 EET 2000'
+cf_time='Sat Feb 26 03:04:10 EET 2000'
charsize='1'
chgrp=''
chmod=''
so='so'
sockethdr=''
socketlib=''
-socksizetype='int *'
+socksizetype='int'
sort='sort'
spackage='Perl5'
spitshell='cat'
uniq='uniq'
uquadtype='unsigned long'
use5005threads='undef'
-use64bits='define'
+use64bitall='define'
+use64bitint='define'
usedl='define'
-usefull64bits='define'
useithreads='define'
uselargefiles='define'
uselongdouble='undef'
zip='zip'
# Configure command line arguments.
config_arg0='Configure'
-config_args='-Dprefix=/opt/perl -Doptimize=-O -Dusethreads -Duse64bits -Duselfs -Dcf_by=yourname -Dcf_email=yourname@yourhost.yourplace.com -Dperladmin=yourname@yourhost.yourplace.com -Dmydomain=.yourplace.com -Dmyhostname=yourhost -dE'
+config_args='-Dprefix=/opt/perl -Doptimize=-O -Dusethreads -Duse64bitint -Duselfs -Dcf_by=yourname -Dcf_email=yourname@yourhost.yourplace.com -Dperladmin=yourname@yourhost.yourplace.com -Dmydomain=.yourplace.com -Dmyhostname=yourhost -dE'
config_argc=11
config_arg1='-Dprefix=/opt/perl'
config_arg2='-Doptimize=-O'
config_arg3='-Dusethreads'
-config_arg4='-Duse64bits'
+config_arg4='-Duse64bitint'
config_arg5='-Duselfs'
config_arg6='-Dcf_by=yourname'
config_arg7='-Dcf_email=yourname@yourhost.yourplace.com'
/*
* Package name : perl5
* Source directory : .
- * Configuration time: Sat Feb 26 00:49:19 EET 2000
+ * Configuration time: Sat Feb 26 03:04:10 EET 2000
* Configured by : jhi
* Target system : osf1 alpha.hut.fi v4.0 878 alpha
*/
*/
#define Uid_t uid_t /* UID type */
-/* USE_64_BITS:
+/* USE_64_BIT_INT:
* This symbol, if defined, indicates that 64-bit integers should
* be used when available. If not defined, the native integers
* will be employed (be they 32 or 64 bits). The minimal possible
* This may mean using for example "long longs", while your memory
* may still be limited to 2 gigabytes.
*/
-#ifndef USE_64_BITS
-#define USE_64_BITS /**/
+/* USE_64_BIT_ALL:
+ * This symbol, if defined, indicates that 64-bit integers should
+ * be used when available. If not defined, the native integers
+ * will be used (be they 32 or 64 bits). The maximal possible
+ * 64-bitness is employed: LP64 or ILP64, meaning that you will
+ * be able to use more than 2 gigabytes of memory. This mode is
+ * even more binary incompatible than USE_64_BIT_INT. You may not
+ * be able to run the resulting executable in a 32-bit CPU at all or
+ * you may need at least to reboot your OS to 64-bit mode.
+ */
+#ifndef USE_64_BIT_INT
+#define USE_64_BIT_INT /**/
#endif
-#ifndef USE_FULL_64_BITS
-#define USE_FULL_64_BITS /**/
+#ifndef USE_64_BIT_ALL
+#define USE_64_BIT_ALL /**/
#endif
/* USE_LARGE_FILES:
#define HAS_LSEEK_PROTO /**/
/* Sock_size_t:
- * This symbol holds the type used for the size argument
- * of various socket calls.
+ * This symbol holds the type used for the size argument of
+ * various socket calls (just the base type, not the pointer-to).
*/
-#define Sock_size_t int * /**/
+#define Sock_size_t int /**/
#endif
*/
#define Uid_t $uidtype /* UID type */
-/* USE_64_BITS:
+/* USE_64_BIT_INT:
* This symbol, if defined, indicates that 64-bit integers should
* be used when available. If not defined, the native integers
* will be employed (be they 32 or 64 bits). The minimal possible
* This may mean using for example "long longs", while your memory
* may still be limited to 2 gigabytes.
*/
-#ifndef USE_64_BITS
-#$use64bits USE_64_BITS /**/
+/* USE_64_BIT_ALL:
+ * This symbol, if defined, indicates that 64-bit integers should
+ * be used when available. If not defined, the native integers
+ * will be used (be they 32 or 64 bits). The maximal possible
+ * 64-bitness is employed: LP64 or ILP64, meaning that you will
+ * be able to use more than 2 gigabytes of memory. This mode is
+ * even more binary incompatible than USE_64_BIT_INT. You may not
+ * be able to run the resulting executable in a 32-bit CPU at all or
+ * you may need at least to reboot your OS to 64-bit mode.
+ */
+#ifndef USE_64_BIT_INT
+#$use64bitint USE_64_BIT_INT /**/
#endif
-#ifndef USE_FULL_64_BITS
-#$usefull64bits USE_FULL_64_BITS /**/
+#ifndef USE_64_BIT_ALL
+#$use64bitall USE_64_BIT_ALL /**/
#endif
/* USE_LARGE_FILES:
#$d_lseekproto HAS_LSEEK_PROTO /**/
/* Sock_size_t:
- * This symbol holds the type used for the size argument
- * of various socket calls.
+ * This symbol holds the type used for the size argument of
+ * various socket calls (just the base type, not the pointer-to).
*/
#define Sock_size_t $socksizetype /**/
$ macros = ""
$ use_vmsdebug_perl = "N"
$ use_debugging_perl = "Y"
-$ use_64bit = "n"
+$ use_64bitint = "n"
$ C_Compiler_Replace = "CC="
$ Thread_Live_Dangerously = "MT="
$ use_two_pot_malloc = "N"
$ echo "a much larger range for perl's mathematical operations. (Note that
$ echo "does *not* enable 64-bit fileops at the moment, as Dec C doesn't
$ echo "do that yet)"
-$ dflt = use_64bit
-$ rp = "Build with 64 bits? [''dflt'] "
+$ dflt = use_64bitint
+$ rp = "Build with 64 bit integers and 128 bit floating point variable? [''dflt'] "
$ GOSUB myread
$ if ans.eqs."" then ans = dflt
$ if (f$extract(0, 1, "''ans'").eqs."Y").or.(f$extract(0, 1, "''ans'").eqs."y")
$ THEN
-$ use_64bit="Y"
+$ use_64bitint="Y"
$ ELSE
-$ use_64bit="N"
+$ use_64bitint="N"
$ ENDIF
$ ENDIF
$!
smail=''
small=''
so=''
-sock_size_type='int *'
+socksizetype='int'
sockethdr=''
socketlib=''
sort='sort'
uidtype='uid_t'
uname='uname'
uniq='uniq'
-use64bits='undef'
+use64bitall='undef'
+use64bitint='undef'
usedl='undef'
-usefull64bits='undef'
uselargefiles='undef'
uselongdouble='undef'
usemorebits='undef'
i_sysstatfs='undef'
i_sysvfs='undef'
i_ustat='undef'
-use64bits='define'
uidsize='2'
gidsize='2'
ivdformat='"ld"'
# after it has prompted the user for whether to use large files.
cat > UU/uselfs.cbu <<'EOCBU'
case "$uselargefiles" in
-$define|true|[yY]*)
+''|$define|true|[yY]*)
lfcflags="`getconf XBS5_ILP32_OFFBIG_CFLAGS 2>/dev/null`"
lfldflags="`getconf XBS5_ILP32_OFFBIG_LDFLAGS 2>/dev/null`"
# _Somehow_ in AIX 4.3.1.0 the above getconf call manages to
esac
EOCBU
-# This script UU/use64bits.cbu will get 'called-back' by Configure
+# This script UU/use64bitint.cbu will get 'called-back' by Configure
# after it has prompted the user for whether to use 64 bits.
-cat > UU/use64bits.cbu <<'EOCBU'
-case "$use64bits" in
+cat > UU/use64bitint.cbu <<'EOCBU'
+case "$use64bitint" in
$define|true|[yY]*)
case "`oslevel`" in
3.*|4.[012].*)
selecttype='int *'
fi
-case "$use64bits" in
+case "$use64bitint" in
$define|true|[yY]*)
if [ "$xxOsRevMajor" -lt 11 ]; then
cat <<EOM >&4
# after it has prompted the user for whether to use 64 bits.
cat > UU/uselfs.cbu <<'EOCBU'
case "$uselargefiles" in
-$define|true|[yY]*)
+''|$define|true|[yY]*)
# there are largefile flags available via getconf(1)
# but we cheat for now.
ccflags="$ccflags -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64"
;;
esac
-case "$use64bits" in
-$define|true|[yY]*)
+case " $use64bits $use64bitint $use64bitall " in
+*" $define "*|*" true "*|*" [yY] "*)
cat >&4 <<EOM
IRIX `uname -r` does not support 64-bit types.
You should upgrade to at least IRIX 6.2.
;;
esac
-case "$use64bits" in
-$define|true|[yY]*)
+case " $use64bits $use64bitint $use64bitall " in
+*" $define "*|*" true "*|*" [yY] "*)
cat >&4 <<EOM
IRIX `uname -r` does not support 64-bit types.
You should upgrade to at least IRIX 6.2.
# The -n32 makes off_t to be 8 bytes, so we should have largefileness.
-# This script UU/use64bits.cbu will get 'called-back' by Configure
+# This script UU/use64bitint.cbu will get 'called-back' by Configure
# after it has prompted the user for whether to use 64 bits.
-cat > UU/use64bits.cbu <<'EOCBU'
-case "$use64bits" in
+cat > UU/use64bitint.cbu <<'EOCBU'
+case "$use64bitint" in
$define|true|[yY]*)
case "`uname -r`" in
[1-5]*|6.[01])
;;
esac
-case "$use64bits" in
-$define|true|[yY]*)
+case " $use64bits $use64bitint $use64bitall " in
+*" $define "*|*" true "*|*" [yY] "*)
cat >&4 <<EOM
IRIX `uname -r` does not support 64-bit types.
You should upgrade to at least IRIX 6.2.
;;
esac
-case "$use64bits" in
-$define|true|[yY]*)
+case " $use64bits $use64bitint $use64bitall " in
+*" $define "*|*" true "*|*" [yY] "*)
cat >&4 <<EOM
IRIX `uname -r` does not support 64-bit types.
You should upgrade to at least IRIX 6.2.
EOM
exit 1
esac
+
EOCBU
case "$uselargefiles" in
-$define|true|[yY]*)
+''|$define|true|[yY]*)
ccflags="$ccflags `getconf LFS_CFLAGS 2>/dev/null`"
ldflags="$ldflags `getconf LFS_LDFLAGS 2>/dev/null`"
libswanted="$libswanted `getconf LFS_LIBS 2>/dev/null|sed -e 's@^-l@@' -e 's@ -l@ @g`"
;;
esac
-# This script UU/use64bits.cbu will get 'called-back' by Configure
+# This script UU/use64bitint.cbu will get 'called-back' by Configure
# after it has prompted the user for whether to use 64 bits.
-cat > UU/use64bits.cbu <<'EOCBU'
-case "$use64bits" in
+cat > UU/use64bitint.cbu <<'EOCBU'
+case "$use64bitint" in
$define|true|[yY]*)
case "`uname -r`" in
2.[1-6])
esac
EOCBU
-case "$usefull64bits" in
+case "$use64bitall" in
$define|true|[yY]*)
- case "$ccflags" in
- *-DUSE_FULL_64_BITS*) ;;
- *) ccflags="$ccflags -DUSE_FULL_64_BITS" ;;
- esac
ccflags="$ccflags `getconf XBS5_LP64_OFF64_CFLAGS`"
ldflags="$ccflags `getconf XBS5_LP64_OFF64_LDFLAGS`"
lddlflags="$lddlflags -G `getconf XBS5_LP64_OFF64_LDFLAGS`"
hint=$hint, useposix=$useposix, d_sigaction=$d_sigaction
usethreads=$usethreads use5005threads=$use5005threads useithreads=$useithreads usemultiplicity=$usemultiplicity
useperlio=$useperlio d_sfio=$d_sfio uselargefiles=$uselargefiles
- use64bits=$use64bits uselongdouble=$uselongdouble usesocks=$usesocks
+ use64bitint=$use64bitint use64bitall=$use64bitall uselongdouble=$uselongdouble usesocks=$usesocks
Compiler:
cc='$cc', optimize='$optimize', gccversion=$gccversion
cppflags='$cppflags'
# ifdef USE_ITHREADS
sv_catpv(PL_Sv," USE_ITHREADS");
# endif
-# ifdef USE_64_BITS
- sv_catpv(PL_Sv," USE_64_BITS");
+# ifdef USE_64_BIT_INT
+ sv_catpv(PL_Sv," USE_64_BIT_INT");
+# endif
+# ifdef USE_64_BIT_ALL
+ sv_catpv(PL_Sv," USE_64_BIT_ALL");
# endif
# ifdef USE_LONG_DOUBLE
sv_catpv(PL_Sv," USE_LONG_DOUBLE");
typedef IVTYPE IV;
typedef UVTYPE UV;
-#if defined(USE_64_BITS) && defined(HAS_QUAD)
+#if defined(USE_64_BIT_INT) && defined(HAS_QUAD)
# if QUADKIND == QUAD_IS_INT64_T && defined(INT64_MAX)
# define IV_MAX INT64_MAX
# define IV_MIN INT64_MIN
usemultiplicity
use5005threads
+ use64bitint (equal to now deprecated 'use64bits')
+ use64bitall
+
uselongdouble
usemorebits
uselargefiles
+ usesocks (only SOCKS v5 supported)
-=head2 -Dusethreads and -Duse64bits now more daring
+=head2 Threadedness and 64-bitness now more daring
The Configure options enabling the use of threads and the use of
64-bitness are now more daring in the sense that they no more have an
capabilities. In other words: if your operating system has the
necessary APIs and datatypes, you should be able just to go ahead and
use them, for threads by Configure -Dusethreads, and for 64 bits
-either explicitly by Configure -Duse64bits or implicitly if your
+either explicitly by Configure -Duse64bitint or implicitly if your
system has 64 bit wide datatypes. See also L<"64-bit support">.
=head2 Long Doubles
=head2 -Dusemorebits
-You can enable both -Duse64bits and -Dlongdouble by -Dusemorebits.
+You can enable both -Duse64bitint and -Dlongdouble by -Dusemorebits.
See also L<"64-bit support">.
=head2 -Duselargefiles
=head2 64-bit support
-All platforms that have 64-bit integers either (a) natively as longs
-or ints (b) via special compiler flags (c) using long long are able to
+ NOTE: The Configure flags -Duselonglong and -Duse64bits
+ have been deprecated. Use -Duse64bitint instead.
+
+Any platform that has 64-bit integers either (a) natively as longs or
+ints (b) via special compiler flags (c) using long long are able to
use "quads" (64-integers) as follows:
=over 4
=back
Note that unless you have the case (a) you will have to configure
-and compile Perl using the -Duse64bits Configure flag.
+and compile Perl using the -Duse64bitint Configure flag.
Unfortunately bit arithmetics (&, |, ^, ~, <<, >>) for numbers are not
64-bit clean, they are explictly forced to be 32-bit because of
scalars.
There are actually two modes of 64-bitness: the first one is achieved
-using Configure -Duse64bits and the second one using Configure
--Dusefull64bits. The difference is that the first one is minimal and
+using Configure -Duse64bitint and the second one using Configure
+-Duse64bitall. The difference is that the first one is minimal and
the second one maximal. The first one does only as much as is
required to get 64-bit integers into Perl (this may mean, for example,
using "long longs") while your memory may still be limited to 2
gigabytes (because your pointers most likely are 32-bit); the second
one goes all the way by attempting to switch also longs (and pointers)
being 64-bit. This may create an even more binary incompatible Perl
-than -Duse64bits: the resulting executable may not run at all in a
+than -Duse64bitint: the resulting executable may not run at all in a
CPU-bit box, or you may have to reboot/reconfigure/rebuild your
operating system to be 64-bit aware.
-Natively 64-bit systems like Alpha and Cray need neither -Duse64bits
-nor -Dusefull64bits.
+Natively 64-bit systems like Alpha and Cray need neither -Duse64bitint
+nor -Duse64bitall.
Last but not least: note that due to Perl's habit of always using
floating point numbers the quads are still not true integers.
You can find out whether your Perl supports quads via L<Config>:
use Config;
- ($Config{use64bits} eq 'define' || $Config{longsize} == 8) &&
+ ($Config{use64bitint} eq 'define' || $Config{longsize} == 8) &&
print "quads\n";
If Perl understands "long doubles" (this requires that the platform
$ perl_d_recvmsg = "undef"
$ perl_d_msghdr_s = "undef"
$ perl_d_cmsghdr_s = "undef"
-$ IF use_64bit .eqs. "Y"
+$ IF use_64bitint .eqs. "Y"
$ THEN
-$ perl_use64bits = "define"
+$ perl_use64bitint = "define"
$ perl_uselargefiles = "define"
$ perl_uselongdouble = "define"
$ perl_usemorebits = "define"
$ ELSE
-$ perl_use64bits = "undef"
+$ perl_use64bitint = "undef"
$ perl_uselargefiles = "undef"
$ perl_uselongdouble = "undef"
$ perl_usemorebits = "undef"
$ ENDIF
-$ IF use_full64bit .eqs. "Y"
+$ IF use_64bitall .eqs. "Y"
$ THEN
-$ perl_usefull64bits = "define"
+$ perl_use64bitall = "define"
$ ELSE
-$ perl_usefull64bits = "undef"
+$ perl_use64bitall = "undef"
$ ENDIF
$ perl_d_drand48proto = "define"
$ perl_d_lseekproto = "define"
$!
$! Are we 64 bit?
$!
-$ if (use_64bit .eqs. "Y")
+$ if (use_64bitint .eqs. "Y")
$ THEN
$ perl_d_PRIfldbl = "define"
$ perl_d_PRIgldbl = "define"
$ WC "i_inttypes='" + perl_i_inttypes + "'"
$ WC "d_off64_t='" + perl_d_off64_t + "'"
$ WC "d_fpos64_t='" + perl_d_fpos64_t + "'"
-$ WC "use64bits='" + perl_use64bits + "'"
-$ WC "usefull64bits='" + perl_usefull64bits + "'"
+$ WC "use64bitall='" + perl_use64bitall + "'"
+$ WC "use64bitint='" + perl_use64bitint + "'"
$ WC "d_drand48proto='" + perl_d_drand48proto + "'"
$ WC "d_lseekproto='" + perl_d_drand48proto + "'"
$ WC "d_old_pthread_create_joinable='" + perl_d_old_pthread_create_joinable + "'"
$ WC "uselongdouble='" + perl_uselongdouble + "'"
$ WC "usemorebits='" + perl_usemorebits + "'"
$ WC "d_quad='" + perl_d_quad + "'"
-$ if (use_64bit .eqs. "Y")
+$ if (use_64bitint .eqs. "Y")
$ THEN
$ WC "quadtype='" + perl_quadtype + "'"
$ WC "uquadtype='" + perl_uquadtype + "'"
$ ELSE
$ WRITE CONFIG "#undef ALWAYS_DEFTYPES"
$ ENDIF
-$ if use_64bit.eqs."Y"
+$ if use_64bitint.eqs."Y"
$ THEN
-$ WRITE CONFIG "#define USE_64_BITS"
+$ WRITE CONFIG "#define USE_64_BIT_INT"
$ WRITE CONFIG "#define USE_LONG_DOUBLE"
$ ENDIF
-$ if use_full64bit.eqs."Y"
+$ if use_64bitall.eqs."Y"
$ THEN
-$ WRITE CONFIG "#define USE_FULL_64_BITS"
+$ WRITE CONFIG "#define USE_64_BIT_ALL"
$ ENDIF
$ WRITE CONFIG "#define HAS_ENVGETENV"
$ WRITE CONFIG "#define PERL_EXTERNAL_GLOB"
$sitelib='/system/ported/perl/lib/site/5.005'
$sitelibexp='/system/ported/perl/lib/site/5.005'
$sizetype='size_t'
-$sock_size_type='int *'
+$socksizetype='int'
$sPRIfldbl='"Lf"'
$sPRIgldbl='"Lg"'
$src='%es#lang/vos_ftp_site/pub/vos/alpha/perl'
$uidtype='uid_t'
$uquadtype='_error_'
$use5005threads='undef'
-$use64bits='undef'
+$use64bitall='undef'
+$use64bitint='undef'
$usedl='undef'
-$usefull64bits='undef'
$uselargefiles='undef'
$uselongdouble='define'
$usemorebits='undef'
*/
#define HAS_MKTIME /**/
+/* HAS_MSYNC:
+ * This symbol, if defined, indicates that the msync system call is
+ * available to synchronize a mapped file.
+ */
+/*#define HAS_MSYNC /**/
+
+/* HAS_MUNMAP:
+ * This symbol, if defined, indicates that the munmap system call is
+ * available to unmap a region, usually mapped by mmap().
+ */
+/*#define HAS_MUNMAP /**/
+
/* HAS_NICE:
* This symbol, if defined, indicates that the nice routine is
* available.
*/
#define STDCHAR unsigned char /**/
+/* CROSSCOMPILE:
+ * This symbol, if defined, signifies that we our
+ * build process is a cross-compilation.
+ */
+/*#define CROSSCOMPILE /**/
+
+/* INTSIZE:
+ * This symbol contains the value of sizeof(int) so that the C
+ * preprocessor can make decisions based on it.
+ */
+/* LONGSIZE:
+ * This symbol contains the value of sizeof(long) so that the C
+ * preprocessor can make decisions based on it.
+ */
+/* SHORTSIZE:
+ * This symbol contains the value of sizeof(short) so that the C
+ * preprocessor can make decisions based on it.
+ */
+#define INTSIZE 4 /**/
+#define LONGSIZE 4 /**/
+#define SHORTSIZE 2 /**/
+
+/* MULTIARCH:
+ * This symbol, if defined, signifies that the build
+ * process will produce some binary files that are going to be
+ * used in a cross-platform environment. This is the case for
+ * example with the NeXT "fat" binaries that contain executables
+ * for several CPUs.
+ */
+/*#define MULTIARCH /**/
+
/* HAS_QUAD:
* This symbol, if defined, tells that there's a 64-bit integer type,
* Quad_t, and its unsigned counterpar, Uquad_t. QUADKIND will be one
*/
/*#define I_SYS_SECURITY /**/
-/* CROSSCOMPILE:
- * This symbol, if defined, signifies that we our
- * build process is a cross-compilation.
- */
-/*#define CROSSCOMPILE /**/
-
-/* INTSIZE:
- * This symbol contains the value of sizeof(int) so that the C
- * preprocessor can make decisions based on it.
- */
-/* LONGSIZE:
- * This symbol contains the value of sizeof(long) so that the C
- * preprocessor can make decisions based on it.
- */
-/* SHORTSIZE:
- * This symbol contains the value of sizeof(short) so that the C
- * preprocessor can make decisions based on it.
- */
-#define INTSIZE 4 /**/
-#define LONGSIZE 4 /**/
-#define SHORTSIZE 2 /**/
-
-/* MULTIARCH:
- * This symbol, if defined, signifies that the build
- * process will produce some binary files that are going to be
- * used in a cross-platform environment. This is the case for
- * example with the NeXT "fat" binaries that contain executables
- * for several CPUs.
+/* OSNAME:
+ * This symbol contains the name of the operating system, as determined
+ * by Configure. You shouldn't rely on it too much; the specific
+ * feature tests from Configure are generally more reliable.
*/
-/*#define MULTIARCH /**/
+#define OSNAME "VOS" /**/
/* MEM_ALIGNBYTES:
* This symbol contains the number of bytes required to align a
- * double. Usual values are 2, 4 and 8. The default is eight,
- * for safety.
+ * double, or a long double when applicable. Usual values are 2,
+ * 4 and 8. The default is eight, for safety.
*/
#if defined(CROSSCOMPILE) || defined(MULTIARCH)
# define MEM_ALIGNBYTES 8
#define MEM_ALIGNBYTES 8
#endif
+/* ARCHLIB:
+ * This variable, if defined, holds the name of the directory in
+ * which the user wants to put architecture-dependent public
+ * library files for perl5. It is most often a local directory
+ * such as /usr/local/lib. Programs using this variable must be
+ * prepared to deal with filename expansion. If ARCHLIB is the
+ * same as PRIVLIB, it is not defined, since presumably the
+ * program already searches PRIVLIB.
+ */
+/* ARCHLIB_EXP:
+ * This symbol contains the ~name expanded version of ARCHLIB, to be used
+ * in programs that are not prepared to deal with ~ expansion at run-time.
+ */
+/*#define ARCHLIB "" /**/
+/*#define ARCHLIB_EXP "" /**/
+
+/* ARCHNAME:
+ * This symbol holds a string representing the architecture name.
+ * It may be used to construct an architecture-dependant pathname
+ * where library files may be held under a private library, for
+ * instance.
+ */
+#define ARCHNAME "vos" /**/
+
+/* HAS_ATOLF:
+ * This symbol, if defined, indicates that the atolf routine is
+ * available to convert strings into long doubles.
+ */
+/*#define HAS_ATOLF /**/
+
+/* HAS_ATOLL:
+ * This symbol, if defined, indicates that the atoll routine is
+ * available to convert strings into long longs.
+ */
+/*#define HAS_ATOLL /**/
+
+/* BIN:
+ * This symbol holds the path of the bin directory where the package will
+ * be installed. Program must be prepared to deal with ~name substitution.
+ */
+/* BIN_EXP:
+ * This symbol is the filename expanded version of the BIN symbol, for
+ * programs that do not want to deal with that at run-time.
+ */
+#define BIN "/system/ported/command_library" /**/
+#define BIN_EXP "/system/ported/command_library" /**/
+
+/* PERL_BINCOMPAT_5005:
+ * This symbol, if defined, indicates that Perl 5.006 should be
+ * binary-compatible with Perl 5.005. This is impossible for builds
+ * that use features like threads and multiplicity it is always $undef
+ * for those versions.
+ */
+/*#define PERL_BINCOMPAT_5005 /**/
+
/* BYTEORDER:
* This symbol holds the hexadecimal constant defined in byteorder,
* i.e. 0x1234 or 0x4321, etc...
#define BYTEORDER 0x4321 /* large digits for MSB */
#endif /* NeXT */
+/* CAT2:
+ * This macro catenates 2 tokens together.
+ */
+/* STRINGIFY:
+ * This macro surrounds its token with double quotes.
+ */
+#if 42 == 1
+#define CAT2(a,b)a/**/b
+#define STRINGIFY(a)"a"
+ /* If you can get stringification with catify, tell me how! */
+#endif
+#if 42 == 42
+#define CAT2(a,b)a ## b
+#define StGiFy(a)# a
+#define STRINGIFY(a)StGiFy(a)
+#endif
+#if 42 != 1 && 42 != 42
+#include "Bletch: How does this C preprocessor catenate tokens?"
+#endif
+
+/* CPPSTDIN:
+ * This symbol contains the first part of the string which will invoke
+ * the C preprocessor on the standard input and produce to standard
+ * output. Typical value of "cc -E" or "/lib/cpp", but it can also
+ * call a wrapper. See CPPRUN.
+ */
+/* CPPMINUS:
+ * This symbol contains the second part of the string which will invoke
+ * the C preprocessor on the standard input and produce to standard
+ * output. This symbol will have the value "-" if CPPSTDIN needs a minus
+ * to specify standard input, otherwise the value is "".
+ */
+/* CPPRUN:
+ * This symbol contains the string which will invoke a C preprocessor on
+ * the standard input and produce to standard output. It needs to end
+ * with CPPLAST, after all other preprocessor flags have been specified.
+ * The main difference with CPPSTDIN is that this program will never be a
+ * pointer to a shell wrapper, i.e. it will be empty if no preprocessor is
+ * available directly to the user. Note that it may well be different from
+ * the preprocessor used to compile the C program.
+ */
+/* CPPLAST:
+ * This symbol is intended to be used along with CPPRUN in the same manner
+ * symbol CPPMINUS is used with CPPSTDIN. It contains either "-" or "".
+ */
+#define CPPSTDIN "cc -E"
+#define CPPMINUS "-"
+#define CPPRUN "cc -E -"
+#define CPPLAST "-"
+
+/* HAS_ACCESS:
+ * This manifest constant lets the C program know that the access()
+ * system call is available to check for accessibility using real UID/GID.
+ * (always present on UNIX.)
+ */
+/*#define HAS_ACCESS /**/
+
/* CASTI32:
* This symbol is defined if the C compiler can cast negative
* or large floating point numbers to 32-bit ints.
*/
/*#define VOID_CLOSEDIR /**/
-/* HAS_FD_SET:
- * This symbol, when defined, indicates presence of the fd_set typedef
- * in <sys/types.h>
+/* HAS_CSH:
+ * This symbol, if defined, indicates that the C-shell exists.
*/
-/*#define HAS_FD_SET /**/
-
-/* Gconvert:
- * This preprocessor macro is defined to convert a floating point
- * number to a string without a trailing decimal point. This
- * emulates the behavior of sprintf("%g"), but is sometimes much more
- * efficient. If gconvert() is not available, but gcvt() drops the
- * trailing decimal point, then gcvt() is used. If all else fails,
- * a macro using sprintf("%g") is used. Arguments for the Gconvert
- * macro are: value, number of digits, whether trailing zeros should
- * be retained, and the output buffer.
- * Possible values are:
- * d_Gconvert='gconvert((x),(n),(t),(b))'
- * d_Gconvert='gcvt((x),(n),(b))'
- * d_Gconvert='sprintf((b),"%.*g",(n),(x))'
- * The last two assume trailing zeros should not be kept.
+/* CSH:
+ * This symbol, if defined, contains the full pathname of csh.
*/
-#define Gconvert(x,n,t,b) sprintf((b),"%.*g",(n),(x))
+/*#define HAS_CSH /**/
+#ifdef HAS_CSH
+#define CSH "" /**/
+#endif
-/* HAS_GNULIBC:
- * This symbol, if defined, indicates to the C program that
- * the GNU C library is being used.
- */
-/*#define HAS_GNULIBC /**/
-/* HAS_ISASCII:
- * This manifest constant lets the C program know that isascii
- * is available.
+/* DLSYM_NEEDS_UNDERSCORE:
+ * This symbol, if defined, indicates that we need to prepend an
+ * underscore to the symbol name before calling dlsym(). This only
+ * makes sense if you *have* dlsym, which we will presume is the
+ * case if you're using dl_dlopen.xs.
*/
-#define HAS_ISASCII /**/
+/*#define DLSYM_NEEDS_UNDERSCORE /**/
-/* HAS_LCHOWN:
- * This symbol, if defined, indicates that the lchown routine is
- * available to operate on a symbolic link (instead of following the
- * link).
+/* HAS_DRAND48_PROTO:
+ * This symbol, if defined, indicates that the system provides
+ * a prototype for the drand48() function. Otherwise, it is up
+ * to the program to supply one. A good guess is
+ * extern double drand48 _((void));
*/
-/*#define HAS_LCHOWN /**/
+/*#define HAS_DRAND48_PROTO /**/
-/* HAS_OPEN3:
- * This manifest constant lets the C program know that the three
- * argument form of open(2) is available.
+/* HAS_ENDGRENT:
+ * This symbol, if defined, indicates that the getgrent routine is
+ * available for finalizing sequential access of the group database.
*/
-#define HAS_OPEN3 /**/
+/*#define HAS_ENDGRENT /**/
-/* HAS_SAFE_BCOPY:
- * This symbol, if defined, indicates that the bcopy routine is available
- * to copy potentially overlapping memory blocks. Otherwise you should
- * probably use memmove() or memcpy(). If neither is defined, roll your
- * own version.
+/* HAS_ENDHOSTENT:
+ * This symbol, if defined, indicates that the endhostent() routine is
+ * available to close whatever was being used for host queries.
*/
-/*#define HAS_SAFE_BCOPY /**/
+#define HAS_ENDHOSTENT /**/
-/* HAS_SAFE_MEMCPY:
- * This symbol, if defined, indicates that the memcpy routine is available
- * to copy potentially overlapping memory blocks. Otherwise you should
- * probably use memmove() or memcpy(). If neither is defined, roll your
- * own version.
+/* HAS_ENDNETENT:
+ * This symbol, if defined, indicates that the endnetent() routine is
+ * available to close whatever was being used for network queries.
*/
-/*#define HAS_SAFE_MEMCPY /**/
+#define HAS_ENDNETENT /**/
-/* HAS_SANE_MEMCMP:
- * This symbol, if defined, indicates that the memcmp routine is available
- * and can be used to compare relative magnitudes of chars with their high
- * bits set. If it is not defined, roll your own version.
+/* HAS_ENDPROTOENT:
+ * This symbol, if defined, indicates that the endprotoent() routine is
+ * available to close whatever was being used for protocol queries.
*/
-#define HAS_SANE_MEMCMP /**/
+#define HAS_ENDPROTOENT /**/
-/* HAS_SIGACTION:
- * This symbol, if defined, indicates that Vr4's sigaction() routine
- * is available.
+/* HAS_ENDPWENT:
+ * This symbol, if defined, indicates that the getgrent routine is
+ * available for finalizing sequential access of the passwd database.
*/
-/*#define HAS_SIGACTION /**/
+/*#define HAS_ENDPWENT /**/
-/* HAS_SIGSETJMP:
- * This variable indicates to the C program that the sigsetjmp()
- * routine is available to save the calling process's registers
- * and stack environment for later use by siglongjmp(), and
- * to optionally save the process's signal mask. See
- * Sigjmp_buf, Sigsetjmp, and Siglongjmp.
- */
-/* Sigjmp_buf:
- * This is the buffer type to be used with Sigsetjmp and Siglongjmp.
- */
-/* Sigsetjmp:
- * This macro is used in the same way as sigsetjmp(), but will invoke
- * traditional setjmp() if sigsetjmp isn't available.
- * See HAS_SIGSETJMP.
- */
-/* Siglongjmp:
- * This macro is used in the same way as siglongjmp(), but will invoke
- * traditional longjmp() if siglongjmp isn't available.
- * See HAS_SIGSETJMP.
+/* HAS_ENDSERVENT:
+ * This symbol, if defined, indicates that the endservent() routine is
+ * available to close whatever was being used for service queries.
*/
-/*#define HAS_SIGSETJMP /**/
-#ifdef HAS_SIGSETJMP
-#define Sigjmp_buf sigjmp_buf
-#define Sigsetjmp(buf,save_mask) sigsetjmp((buf),(save_mask))
-#define Siglongjmp(buf,retval) siglongjmp((buf),(retval))
-#else
-#define Sigjmp_buf jmp_buf
-#define Sigsetjmp(buf,save_mask) setjmp((buf))
-#define Siglongjmp(buf,retval) longjmp((buf),(retval))
-#endif
+#define HAS_ENDSERVENT /**/
-/* USE_STDIO_PTR:
- * This symbol is defined if the _ptr and _cnt fields (or similar)
- * of the stdio FILE structure can be used to access the stdio buffer
- * for a file handle. If this is defined, then the FILE_ptr(fp)
- * and FILE_cnt(fp) macros will also be defined and should be used
- * to access these fields.
- */
-/* FILE_ptr:
- * This macro is used to access the _ptr field (or equivalent) of the
- * FILE structure pointed to by its argument. This macro will always be
- * defined if USE_STDIO_PTR is defined.
+/* HAS_ENDSPENT:
+ * This symbol, if defined, indicates that the endspent system call is
+ * available to finalize the scan of SysV shadow password entries.
*/
-/* STDIO_PTR_LVALUE:
- * This symbol is defined if the FILE_ptr macro can be used as an
- * lvalue.
+/*#define HAS_ENDSPENT /**/
+
+/* HAS_FD_SET:
+ * This symbol, when defined, indicates presence of the fd_set typedef
+ * in <sys/types.h>
*/
-/* FILE_cnt:
- * This macro is used to access the _cnt field (or equivalent) of the
- * FILE structure pointed to by its argument. This macro will always be
- * defined if USE_STDIO_PTR is defined.
+/*#define HAS_FD_SET /**/
+
+/* HAS_FPOS64_T:
+ * This symbol will be defined if the C compiler supports fpos64_t.
*/
-/* STDIO_CNT_LVALUE:
- * This symbol is defined if the FILE_cnt macro can be used as an
- * lvalue.
+/*#define HAS_FPOS64_T /**/
+
+/* HAS_STRUCT_FS_DATA:
+ * This symbol, if defined, indicates that the struct fs_data
+ * to do statfs() is supported.
*/
-#define USE_STDIO_PTR /**/
-#ifdef USE_STDIO_PTR
-#define FILE_ptr(fp) ((fp)->_ptr)
-#define STDIO_PTR_LVALUE /**/
-#define FILE_cnt(fp) ((fp)->_cnt)
-#define STDIO_CNT_LVALUE /**/
-#endif
+/*#define HAS_STRUCT_FS_DATA /**/
-/* USE_STDIO_BASE:
- * This symbol is defined if the _base field (or similar) of the
- * stdio FILE structure can be used to access the stdio buffer for
- * a file handle. If this is defined, then the FILE_base(fp) macro
- * will also be defined and should be used to access this field.
- * Also, the FILE_bufsiz(fp) macro will be defined and should be used
- * to determine the number of bytes in the buffer. USE_STDIO_BASE
- * will never be defined unless USE_STDIO_PTR is.
+/* HAS_FSEEKO:
+ * This symbol, if defined, indicates that the fseeko routine is
+ * available to fseek beyond 32 bits (useful for ILP32 hosts).
*/
-/* FILE_base:
- * This macro is used to access the _base field (or equivalent) of the
- * FILE structure pointed to by its argument. This macro will always be
- * defined if USE_STDIO_BASE is defined.
+/*#define HAS_FSEEKO /**/
+
+/* HAS_FSTATFS:
+ * This symbol, if defined, indicates that the fstatfs routine is
+ * available to stat filesystems by file descriptors.
*/
-/* FILE_bufsiz:
- * This macro is used to determine the number of bytes in the I/O
- * buffer pointed to by _base field (or equivalent) of the FILE
- * structure pointed to its argument. This macro will always be defined
- * if USE_STDIO_BASE is defined.
+/*#define HAS_FSTATFS /**/
+
+/* HAS_FTELLO:
+ * This symbol, if defined, indicates that the ftello routine is
+ * available to ftell beyond 32 bits (useful for ILP32 hosts).
*/
-#define USE_STDIO_BASE /**/
-#ifdef USE_STDIO_BASE
-#define FILE_base(fp) ((fp)->_base)
-#define FILE_bufsiz(fp) ((fp)->_cnt + (fp)->_ptr - (fp)->_base)
-#endif
+/*#define HAS_FTELLO /**/
-/* HAS_VPRINTF:
- * This symbol, if defined, indicates that the vprintf routine is available
- * to printf with a pointer to an argument list. If unavailable, you
- * may need to write your own, probably in terms of _doprnt().
+/* Gconvert:
+ * This preprocessor macro is defined to convert a floating point
+ * number to a string without a trailing decimal point. This
+ * emulates the behavior of sprintf("%g"), but is sometimes much more
+ * efficient. If gconvert() is not available, but gcvt() drops the
+ * trailing decimal point, then gcvt() is used. If all else fails,
+ * a macro using sprintf("%g") is used. Arguments for the Gconvert
+ * macro are: value, number of digits, whether trailing zeros should
+ * be retained, and the output buffer.
+ * Possible values are:
+ * d_Gconvert='gconvert((x),(n),(t),(b))'
+ * d_Gconvert='gcvt((x),(n),(b))'
+ * d_Gconvert='sprintf((b),"%.*g",(n),(x))'
+ * The last two assume trailing zeros should not be kept.
*/
-/* USE_CHAR_VSPRINTF:
- * This symbol is defined if this system has vsprintf() returning type
- * (char*). The trend seems to be to declare it as "int vsprintf()". It
- * is up to the package author to declare vsprintf correctly based on the
- * symbol.
+#define Gconvert(x,n,t,b) sprintf((b),"%.*g",(n),(x))
+
+/* HAS_GETCWD:
+ * This symbol, if defined, indicates that the getcwd routine is
+ * available to get the current working directory.
*/
-#define HAS_VPRINTF /**/
-/*#define USE_CHAR_VSPRINTF /**/
+#define HAS_GETCWD /**/
-/* DOUBLESIZE:
- * This symbol contains the size of a double, so that the C preprocessor
- * can make decisions based on it.
+/* HAS_GETGRENT:
+ * This symbol, if defined, indicates that the getgrent routine is
+ * available for sequential access of the group database.
*/
-#define DOUBLESIZE 8 /**/
+/*#define HAS_GETGRENT /**/
-/* I_TIME:
- * This symbol, if defined, indicates to the C program that it should
- * include <time.h>.
+/* HAS_GETHOSTBYADDR:
+ * This symbol, if defined, indicates that the gethostbyaddr() routine is
+ * available to look up hosts by their IP addresses.
*/
-/* I_SYS_TIME:
- * This symbol, if defined, indicates to the C program that it should
- * include <sys/time.h>.
+#define HAS_GETHOSTBYADDR /**/
+
+/* HAS_GETHOSTBYNAME:
+ * This symbol, if defined, indicates that the gethostbyname() routine is
+ * available to look up host names in some data base or other.
*/
-/* I_SYS_TIME_KERNEL:
- * This symbol, if defined, indicates to the C program that it should
- * include <sys/time.h> with KERNEL defined.
+#define HAS_GETHOSTBYNAME /**/
+
+/* HAS_GETHOSTENT:
+ * This symbol, if defined, indicates that the gethostent() routine is
+ * available to look up host names in some data base or another.
*/
-/*#define I_TIME /**/
-#define I_SYS_TIME /**/
-/*#define I_SYS_TIME_KERNEL /**/
+#define HAS_GETHOSTENT /**/
-/* VAL_O_NONBLOCK:
- * This symbol is to be used during open() or fcntl(F_SETFL) to turn on
- * non-blocking I/O for the file descriptor. Note that there is no way
- * back, i.e. you cannot turn it blocking again this way. If you wish to
- * alternatively switch between blocking and non-blocking, use the
- * ioctl(FIOSNBIO) call instead, but that is not supported by all devices.
+/* HAS_GETHOSTNAME:
+ * This symbol, if defined, indicates that the C program may use the
+ * gethostname() routine to derive the host name. See also HAS_UNAME
+ * and PHOSTNAME.
*/
-/* VAL_EAGAIN:
- * This symbol holds the errno error code set by read() when no data was
- * present on the non-blocking file descriptor.
+/* HAS_UNAME:
+ * This symbol, if defined, indicates that the C program may use the
+ * uname() routine to derive the host name. See also HAS_GETHOSTNAME
+ * and PHOSTNAME.
*/
-/* RD_NODATA:
- * This symbol holds the return code from read() when no data is present
- * on the non-blocking file descriptor. Be careful! If EOF_NONBLOCK is
- * not defined, then you can't distinguish between no data and EOF by
- * issuing a read(). You'll have to find another way to tell for sure!
+/* PHOSTNAME:
+ * This symbol, if defined, indicates the command to feed to the
+ * popen() routine to derive the host name. See also HAS_GETHOSTNAME
+ * and HAS_UNAME. Note that the command uses a fully qualified path,
+ * so that it is safe even if used by a process with super-user
+ * privileges.
*/
-/* EOF_NONBLOCK:
- * This symbol, if defined, indicates to the C program that a read() on
- * a non-blocking file descriptor will return 0 on EOF, and not the value
- * held in RD_NODATA (-1 usually, in that case!).
+/* HAS_PHOSTNAME:
+ * This symbol, if defined, indicates that the C program may use the
+ * contents of PHOSTNAME as a command to feed to the popen() routine
+ * to derive the host name.
*/
-#define VAL_O_NONBLOCK O_NONBLOCK
-#define VAL_EAGAIN EAGAIN
-#define RD_NODATA -1
-#define EOF_NONBLOCK
+#define HAS_GETHOSTNAME /**/
+#define HAS_UNAME /**/
+/*#define HAS_PHOSTNAME /**/
+#ifdef HAS_PHOSTNAME
+#define PHOSTNAME "" /* How to get the host name */
+#endif
-/* PTRSIZE:
- * This symbol contains the size of a pointer, so that the C preprocessor
- * can make decisions based on it. It will be sizeof(void *) if
- * the compiler supports (void *); otherwise it will be
- * sizeof(char *).
+/* HAS_GETHOST_PROTOS:
+ * This symbol, if defined, indicates that <netdb.h> includes
+ * prototypes for gethostent(), gethostbyname(), and
+ * gethostbyaddr(). Otherwise, it is up to the program to guess
+ * them. See netdbtype.U for probing for various Netdb_xxx_t types.
*/
-#define PTRSIZE 4 /**/
+#define HAS_GETHOST_PROTOS /**/
-/* Drand01:
- * This macro is to be used to generate uniformly distributed
- * random numbers over the range [0., 1.[. You may have to supply
- * an 'extern double drand48();' in your program since SunOS 4.1.3
- * doesn't provide you with anything relevant in it's headers.
- * See HAS_DRAND48_PROTO.
- */
-/* Rand_seed_t:
- * This symbol defines the type of the argument of the
- * random seed function.
- */
-/* seedDrand01:
- * This symbol defines the macro to be used in seeding the
- * random number generator (see Drand01).
- */
-/* RANDBITS:
- * This symbol indicates how many bits are produced by the
- * function used to generate normalized random numbers.
- * Values include 15, 16, 31, and 48.
+/* HAS_GETMNT:
+ * This symbol, if defined, indicates that the getmnt routine is
+ * available to get filesystem mount info by filename.
*/
-#define Drand01() rand()/(RAND_MAX+1) /**/
-#define Rand_seed_t unsigned int /**/
-#define seedDrand01(x) srand((Rand_seed_t)x) /**/
-#define RANDBITS 15 /**/
+/*#define HAS_GETMNT /**/
-/* SSize_t:
- * This symbol holds the type used by functions that return
- * a count of bytes or an error condition. It must be a signed type.
- * It is usually ssize_t, but may be long or int, etc.
- * It may be necessary to include <sys/types.h> or <unistd.h>
- * to get any typedef'ed information.
- * We will pick a type such that sizeof(SSize_t) == sizeof(Size_t).
+/* HAS_GETMNTENT:
+ * This symbol, if defined, indicates that the getmntent routine is
+ * available to iterate through mounted file systems to get their info.
*/
-#define SSize_t ssize_t /* signed count of bytes */
+/*#define HAS_GETMNTENT /**/
-/* EBCDIC:
- * This symbol, if defined, indicates that this system uses
- * EBCDIC encoding.
+/* HAS_GETNETBYADDR:
+ * This symbol, if defined, indicates that the getnetbyaddr() routine is
+ * available to look up networks by their IP addresses.
*/
-/*#define EBCDIC /**/
+#define HAS_GETNETBYADDR /**/
-/* ARCHLIB:
- * This variable, if defined, holds the name of the directory in
- * which the user wants to put architecture-dependent public
- * library files for perl5. It is most often a local directory
- * such as /usr/local/lib. Programs using this variable must be
- * prepared to deal with filename expansion. If ARCHLIB is the
- * same as PRIVLIB, it is not defined, since presumably the
- * program already searches PRIVLIB.
- */
-/* ARCHLIB_EXP:
- * This symbol contains the ~name expanded version of ARCHLIB, to be used
- * in programs that are not prepared to deal with ~ expansion at run-time.
+/* HAS_GETNETBYNAME:
+ * This symbol, if defined, indicates that the getnetbyname() routine is
+ * available to look up networks by their names.
*/
-/*#define ARCHLIB "" /**/
-/*#define ARCHLIB_EXP "" /**/
+#define HAS_GETNETBYNAME /**/
-/* BIN:
- * This symbol holds the path of the bin directory where the package will
- * be installed. Program must be prepared to deal with ~name substitution.
- */
-/* BIN_EXP:
- * This symbol is the filename expanded version of the BIN symbol, for
- * programs that do not want to deal with that at run-time.
+/* HAS_GETNETENT:
+ * This symbol, if defined, indicates that the getnetent() routine is
+ * available to look up network names in some data base or another.
*/
-#define BIN "/system/ported/command_library" /**/
-#define BIN_EXP "/system/ported/command_library" /**/
+#define HAS_GETNETENT /**/
-/* INSTALL_USR_BIN_PERL:
- * This symbol, if defined, indicates that Perl is to be installed
- * also as /usr/bin/perl.
+/* HAS_GETNET_PROTOS:
+ * This symbol, if defined, indicates that <netdb.h> includes
+ * prototypes for getnetent(), getnetbyname(), and
+ * getnetbyaddr(). Otherwise, it is up to the program to guess
+ * them. See netdbtype.U for probing for various Netdb_xxx_t types.
*/
-/*#define INSTALL_USR_BIN_PERL /**/
+#define HAS_GETNET_PROTOS /**/
-/* PRIVLIB:
- * This symbol contains the name of the private library for this package.
- * The library is private in the sense that it needn't be in anyone's
- * execution path, but it should be accessible by the world. The program
- * should be prepared to do ~ expansion.
- */
-/* PRIVLIB_EXP:
- * This symbol contains the ~name expanded version of PRIVLIB, to be used
- * in programs that are not prepared to deal with ~ expansion at run-time.
+/* HAS_GETPROTOENT:
+ * This symbol, if defined, indicates that the getprotoent() routine is
+ * available to look up protocols in some data base or another.
*/
-#define PRIVLIB "/system/ported/perl/lib/5.005" /**/
-#define PRIVLIB_EXP "/system/ported/perl/lib/5.005" /**/
+#define HAS_GETPROTOENT /**/
-/* SITEARCH:
- * This symbol contains the name of the private library for this package.
- * The library is private in the sense that it needn't be in anyone's
- * execution path, but it should be accessible by the world. The program
- * should be prepared to do ~ expansion.
- * The standard distribution will put nothing in this directory.
- * After perl has been installed, users may install their own local
- * architecture-dependent modules in this directory with
- * MakeMaker Makefile.PL
- * or equivalent. See INSTALL for details.
+/* HAS_GETPROTOBYNAME:
+ * This symbol, if defined, indicates that the getprotobyname()
+ * routine is available to look up protocols by their name.
*/
-/* SITEARCH_EXP:
- * This symbol contains the ~name expanded version of SITEARCH, to be used
- * in programs that are not prepared to deal with ~ expansion at run-time.
+/* HAS_GETPROTOBYNUMBER:
+ * This symbol, if defined, indicates that the getprotobynumber()
+ * routine is available to look up protocols by their number.
*/
-/*#define SITEARCH "" /**/
-/*#define SITEARCH_EXP "" /**/
+#define HAS_GETPROTOBYNAME /**/
+#define HAS_GETPROTOBYNUMBER /**/
-/* SITELIB:
- * This symbol contains the name of the private library for this package.
- * The library is private in the sense that it needn't be in anyone's
- * execution path, but it should be accessible by the world. The program
- * should be prepared to do ~ expansion.
- * The standard distribution will put nothing in this directory.
- * After perl has been installed, users may install their own local
- * architecture-independent modules in this directory with
- * MakeMaker Makefile.PL
- * or equivalent. See INSTALL for details.
+/* HAS_GETPROTO_PROTOS:
+ * This symbol, if defined, indicates that <netdb.h> includes
+ * prototypes for getprotoent(), getprotobyname(), and
+ * getprotobyaddr(). Otherwise, it is up to the program to guess
+ * them. See netdbtype.U for probing for various Netdb_xxx_t types.
*/
-/* SITELIB_EXP:
- * This symbol contains the ~name expanded version of SITELIB, to be used
- * in programs that are not prepared to deal with ~ expansion at run-time.
+#define HAS_GETPROTO_PROTOS /**/
+
+/* HAS_GETPWENT:
+ * This symbol, if defined, indicates that the getpwent routine is
+ * available for sequential access of the passwd database.
+ * If this is not available, the older getpw() function may be available.
*/
-#define SITELIB "/system/ported/perl/lib/site/5.005" /**/
-#define SITELIB_EXP "/system/ported/perl/lib/site/5.005" /**/
+/*#define HAS_GETPWENT /**/
-/* PERL_VENDORLIB_EXP:
- * This symbol contains the ~name expanded version of VENDORLIB, to be used
- * in programs that are not prepared to deal with ~ expansion at run-time.
+/* HAS_GETSERVENT:
+ * This symbol, if defined, indicates that the getservent() routine is
+ * available to look up network services in some data base or another.
*/
-#define PERL_VENDORLIB_EXP "" /**/
+#define HAS_GETSERVENT /**/
-/* OSNAME:
- * This symbol contains the name of the operating system, as determined
- * by Configure. You shouldn't rely on it too much; the specific
- * feature tests from Configure are generally more reliable.
+/* HAS_GETSERV_PROTOS:
+ * This symbol, if defined, indicates that <netdb.h> includes
+ * prototypes for getservent(), getservbyname(), and
+ * getservbyaddr(). Otherwise, it is up to the program to guess
+ * them. See netdbtype.U for probing for various Netdb_xxx_t types.
*/
-#define OSNAME "VOS" /**/
+#define HAS_GETSERV_PROTOS /**/
-/* CAT2:
- * This macro catenates 2 tokens together.
+/* HAS_GETSPENT:
+ * This symbol, if defined, indicates that the getspent system call is
+ * available to retrieve SysV shadow password entries sequentially.
*/
-/* STRINGIFY:
- * This macro surrounds its token with double quotes.
+/*#define HAS_GETSPENT /**/
+
+/* HAS_GETSPNAM:
+ * This symbol, if defined, indicates that the getspnam system call is
+ * available to retrieve SysV shadow password entries by name.
*/
-#if 42 == 1
-#define CAT2(a,b)a/**/b
-#define STRINGIFY(a)"a"
- /* If you can get stringification with catify, tell me how! */
-#endif
-#if 42 == 42
-#define CAT2(a,b)a ## b
-#define StGiFy(a)# a
-#define STRINGIFY(a)StGiFy(a)
-#endif
-#if 42 != 1 && 42 != 42
-#include "Bletch: How does this C preprocessor catenate tokens?"
-#endif
+/*#define HAS_GETSPNAM /**/
-/* CPPSTDIN:
- * This symbol contains the first part of the string which will invoke
- * the C preprocessor on the standard input and produce to standard
- * output. Typical value of "cc -E" or "/lib/cpp", but it can also
- * call a wrapper. See CPPRUN.
+/* HAS_GETSERVBYNAME:
+ * This symbol, if defined, indicates that the getservbyname()
+ * routine is available to look up services by their name.
*/
-/* CPPMINUS:
- * This symbol contains the second part of the string which will invoke
- * the C preprocessor on the standard input and produce to standard
- * output. This symbol will have the value "-" if CPPSTDIN needs a minus
- * to specify standard input, otherwise the value is "".
+/* HAS_GETSERVBYPORT:
+ * This symbol, if defined, indicates that the getservbyport()
+ * routine is available to look up services by their port.
*/
-/* CPPRUN:
- * This symbol contains the string which will invoke a C preprocessor on
- * the standard input and produce to standard output. It needs to end
- * with CPPLAST, after all other preprocessor flags have been specified.
- * The main difference with CPPSTDIN is that this program will never be a
- * pointer to a shell wrapper, i.e. it will be empty if no preprocessor is
- * available directly to the user. Note that it may well be different from
- * the preprocessor used to compile the C program.
+#define HAS_GETSERVBYNAME /**/
+#define HAS_GETSERVBYPORT /**/
+
+/* HAS_GNULIBC:
+ * This symbol, if defined, indicates to the C program that
+ * the GNU C library is being used.
*/
-/* CPPLAST:
- * This symbol is intended to be used along with CPPRUN in the same manner
- * symbol CPPMINUS is used with CPPSTDIN. It contains either "-" or "".
+/*#define HAS_GNULIBC /**/
+#if defined(HAS_GNULIBC) && !defined(_GNU_SOURCE)
+# define _GNU_SOURCE
+#endif
+/* HAS_HASMNTOPT:
+ * This symbol, if defined, indicates that the hasmntopt routine is
+ * available to query the mount options of file systems.
*/
-#define CPPSTDIN "cc -E"
-#define CPPMINUS "-"
-#define CPPRUN "cc -E -"
-#define CPPLAST "-"
+/*#define HAS_HASMNTOPT /**/
-/* HAS_ACCESS:
- * This manifest constant lets the C program know that the access()
- * system call is available to check for accessibility using real UID/GID.
- * (always present on UNIX.)
+/* HAS_HTONL:
+ * This symbol, if defined, indicates that the htonl() routine (and
+ * friends htons() ntohl() ntohs()) are available to do network
+ * order byte swapping.
*/
-/*#define HAS_ACCESS /**/
-
-/* HAS_CSH:
- * This symbol, if defined, indicates that the C-shell exists.
- */
-/* CSH:
- * This symbol, if defined, contains the full pathname of csh.
- */
-/*#define HAS_CSH /**/
-#ifdef HAS_CSH
-#define CSH "" /**/
-#endif
-
-/* HAS_ENDGRENT:
- * This symbol, if defined, indicates that the getgrent routine is
- * available for finalizing sequential access of the group database.
- */
-/*#define HAS_ENDGRENT /**/
-
-/* HAS_ENDHOSTENT:
- * This symbol, if defined, indicates that the endhostent() routine is
- * available to close whatever was being used for host queries.
- */
-#define HAS_ENDHOSTENT /**/
-
-/* HAS_ENDNETENT:
- * This symbol, if defined, indicates that the endnetent() routine is
- * available to close whatever was being used for network queries.
- */
-#define HAS_ENDNETENT /**/
-
-/* HAS_ENDPROTOENT:
- * This symbol, if defined, indicates that the endprotoent() routine is
- * available to close whatever was being used for protocol queries.
- */
-#define HAS_ENDPROTOENT /**/
-
-/* HAS_ENDPWENT:
- * This symbol, if defined, indicates that the getgrent routine is
- * available for finalizing sequential access of the passwd database.
- */
-/*#define HAS_ENDPWENT /**/
-
-/* HAS_ENDSERVENT:
- * This symbol, if defined, indicates that the endservent() routine is
- * available to close whatever was being used for service queries.
- */
-#define HAS_ENDSERVENT /**/
-
-/* HAS_GETGRENT:
- * This symbol, if defined, indicates that the getgrent routine is
- * available for sequential access of the group database.
- */
-/*#define HAS_GETGRENT /**/
-
-/* HAS_GETHOSTBYADDR:
- * This symbol, if defined, indicates that the gethostbyaddr() routine is
- * available to look up hosts by their IP addresses.
- */
-#define HAS_GETHOSTBYADDR /**/
-
-/* HAS_GETHOSTBYNAME:
- * This symbol, if defined, indicates that the gethostbyname() routine is
- * available to look up host names in some data base or other.
- */
-#define HAS_GETHOSTBYNAME /**/
-
-/* HAS_GETHOSTENT:
- * This symbol, if defined, indicates that the gethostent() routine is
- * available to look up host names in some data base or another.
- */
-#define HAS_GETHOSTENT /**/
-
-/* HAS_GETHOSTNAME:
- * This symbol, if defined, indicates that the C program may use the
- * gethostname() routine to derive the host name. See also HAS_UNAME
- * and PHOSTNAME.
- */
-/* HAS_UNAME:
- * This symbol, if defined, indicates that the C program may use the
- * uname() routine to derive the host name. See also HAS_GETHOSTNAME
- * and PHOSTNAME.
- */
-/* PHOSTNAME:
- * This symbol, if defined, indicates the command to feed to the
- * popen() routine to derive the host name. See also HAS_GETHOSTNAME
- * and HAS_UNAME. Note that the command uses a fully qualified path,
- * so that it is safe even if used by a process with super-user
- * privileges.
- */
-/* HAS_PHOSTNAME:
- * This symbol, if defined, indicates that the C program may use the
- * contents of PHOSTNAME as a command to feed to the popen() routine
- * to derive the host name.
- */
-#define HAS_GETHOSTNAME /**/
-#define HAS_UNAME /**/
-/*#define HAS_PHOSTNAME /**/
-#ifdef HAS_PHOSTNAME
-#define PHOSTNAME "" /* How to get the host name */
-#endif
-
-/* HAS_GETNETBYADDR:
- * This symbol, if defined, indicates that the getnetbyaddr() routine is
- * available to look up networks by their IP addresses.
- */
-#define HAS_GETNETBYADDR /**/
-
-/* HAS_GETNETBYNAME:
- * This symbol, if defined, indicates that the getnetbyname() routine is
- * available to look up networks by their names.
- */
-#define HAS_GETNETBYNAME /**/
-
-/* HAS_GETNETENT:
- * This symbol, if defined, indicates that the getnetent() routine is
- * available to look up network names in some data base or another.
- */
-#define HAS_GETNETENT /**/
-
-/* HAS_GETPROTOENT:
- * This symbol, if defined, indicates that the getprotoent() routine is
- * available to look up protocols in some data base or another.
- */
-#define HAS_GETPROTOENT /**/
-
-/* HAS_GETPROTOBYNAME:
- * This symbol, if defined, indicates that the getprotobyname()
- * routine is available to look up protocols by their name.
- */
-/* HAS_GETPROTOBYNUMBER:
- * This symbol, if defined, indicates that the getprotobynumber()
- * routine is available to look up protocols by their number.
- */
-#define HAS_GETPROTOBYNAME /**/
-#define HAS_GETPROTOBYNUMBER /**/
-
-/* HAS_GETPWENT:
- * This symbol, if defined, indicates that the getpwent routine is
- * available for sequential access of the passwd database.
- * If this is not available, the older getpw() function may be available.
- */
-/*#define HAS_GETPWENT /**/
-
-/* HAS_GETSERVENT:
- * This symbol, if defined, indicates that the getservent() routine is
- * available to look up network services in some data base or another.
- */
-#define HAS_GETSERVENT /**/
-
-/* HAS_GETSERVBYNAME:
- * This symbol, if defined, indicates that the getservbyname()
- * routine is available to look up services by their name.
- */
-/* HAS_GETSERVBYPORT:
- * This symbol, if defined, indicates that the getservbyport()
- * routine is available to look up services by their port.
- */
-#define HAS_GETSERVBYNAME /**/
-#define HAS_GETSERVBYPORT /**/
-
-/* HAS_HTONL:
- * This symbol, if defined, indicates that the htonl() routine (and
- * friends htons() ntohl() ntohs()) are available to do network
- * order byte swapping.
- */
-/* HAS_HTONS:
- * This symbol, if defined, indicates that the htons() routine (and
- * friends htonl() ntohl() ntohs()) are available to do network
- * order byte swapping.
+/* HAS_HTONS:
+ * This symbol, if defined, indicates that the htons() routine (and
+ * friends htonl() ntohl() ntohs()) are available to do network
+ * order byte swapping.
*/
/* HAS_NTOHL:
* This symbol, if defined, indicates that the ntohl() routine (and
#define HAS_NTOHL /**/
#define HAS_NTOHS /**/
+/* HAS_ICONV:
+ * This symbol, if defined, indicates that the iconv routine is
+ * available to do character set conversions.
+ */
+/*#define HAS_ICONV /**/
+
+/* HAS_INT64_T:
+ * This symbol will defined if the C compiler supports int64_t.
+ * Usually the <inttypes.h> needs to be included, but sometimes
+ * <sys/types.h> is enough.
+ */
+# HAS_INT64_T /**/
+
+/* HAS_ISASCII:
+ * This manifest constant lets the C program know that isascii
+ * is available.
+ */
+#define HAS_ISASCII /**/
+
+/* HAS_LCHOWN:
+ * This symbol, if defined, indicates that the lchown routine is
+ * available to operate on a symbolic link (instead of following the
+ * link).
+ */
+/*#define HAS_LCHOWN /**/
+
+/* HAS_LDBL_DIG:
+ * This symbol, if defined, indicates that this system's <float.h>
+ * or <limits.h> defines the symbol LDBL_DIG, which is the number
+ * of significant digits in a long double precision number. Unlike
+ * for DBL_DIG, there's no good guess for LDBL_DIG if it is undefined.
+ */
+#define HAS_LDBL_DIG /* */
+
/* HAS_LONG_DOUBLE:
* This symbol will be defined if the C compiler supports long
* doubles.
*/
#define HAS_MEMCHR /**/
-/* HAS_MSG:
- * This symbol, if defined, indicates that the entire msg*(2) library is
- * supported (IPC mechanism based on message queues).
+/* HAS_MKDTEMP:
+ * This symbol, if defined, indicates that the mkdtemp routine is
+ * available to exclusively create a uniquely named temporary directory.
*/
-/*#define HAS_MSG /**/
+# HAS_MKDTEMP /**/
-/* HAS_SEM:
- * This symbol, if defined, indicates that the entire sem*(2) library is
- * supported.
+/* HAS_MKSTEMP:
+ * This symbol, if defined, indicates that the mkstemp routine is
+ * available to exclusively create and open a uniquely named
+ * temporary file.
*/
-/*#define HAS_SEM /**/
+# HAS_MKSTEMP /**/
-/* HAS_SETGRENT:
- * This symbol, if defined, indicates that the setgrent routine is
- * available for initializing sequential access of the group database.
+/* HAS_MKSTEMPS:
+ * This symbol, if defined, indicates that the mkstemps routine is
+ * available to excluslvely create and open a uniquely named
+ * (with a suffix) temporary file.
*/
-/*#define HAS_SETGRENT /**/
+# HAS_MKSTEMPS /**/
-/* HAS_SETGROUPS:
- * This symbol, if defined, indicates that the setgroups() routine is
- * available to set the list of process groups. If unavailable, multiple
- * groups are probably not supported.
+/* HAS_MMAP:
+ * This symbol, if defined, indicates that the mmap system call is
+ * available to map a file into memory.
*/
-/*#define HAS_SETGROUPS /**/
-
-/* HAS_SETHOSTENT:
- * This symbol, if defined, indicates that the sethostent() routine is
- * available.
+/* Mmap_t:
+ * This symbol holds the return type of the mmap() system call
+ * (and simultaneously the type of the first argument).
+ * Usually set to 'void *' or 'cadd_t'.
*/
-#define HAS_SETHOSTENT /**/
+/*#define HAS_MMAP /**/
+#define Mmap_t $mmaptype /**/
-/* HAS_SETNETENT:
- * This symbol, if defined, indicates that the setnetent() routine is
- * available.
+/* HAS_MPROTECT:
+ * This symbol, if defined, indicates that the mprotect system call is
+ * available to modify the access protection of a memory mapped file.
*/
-#define HAS_SETNETENT /**/
+/*#define HAS_MPROTECT /**/
-/* HAS_SETPROTOENT:
- * This symbol, if defined, indicates that the setprotoent() routine is
- * available.
+/* HAS_MSG:
+ * This symbol, if defined, indicates that the entire msg*(2) library is
+ * supported (IPC mechanism based on message queues).
*/
-#define HAS_SETPROTOENT /**/
+/*#define HAS_MSG /**/
-/* HAS_SETPWENT:
- * This symbol, if defined, indicates that the setpwent routine is
- * available for initializing sequential access of the passwd database.
+/* HAS_OFF64_T:
+ * This symbol will be defined if the C compiler supports off64_t.
*/
-/*#define HAS_SETPWENT /**/
+/*#define HAS_OFF64_T /**/
-/* HAS_SETSERVENT:
- * This symbol, if defined, indicates that the setservent() routine is
- * available.
+/* HAS_OPEN3:
+ * This manifest constant lets the C program know that the three
+ * argument form of open(2) is available.
*/
-#define HAS_SETSERVENT /**/
+#define HAS_OPEN3 /**/
-/* HAS_SETVBUF:
- * This symbol, if defined, indicates that the setvbuf routine is
- * available to change buffering on an open stdio stream.
- * to a line-buffered mode.
+/* OLD_PTHREAD_CREATE_JOINABLE:
+ * This symbol, if defined, indicates how to create pthread
+ * in joinable (aka undetached) state. NOTE: not defined
+ * if pthread.h already has defined PTHREAD_CREATE_JOINABLE
+ * (the new version of the constant).
+ * If defined, known values are PTHREAD_CREATE_UNDETACHED
+ * and __UNDETACHED.
*/
-#define HAS_SETVBUF /**/
+/*#define OLD_PTHREAD_CREATE_JOINABLE /**/
+
+/* HAS_PTHREAD_YIELD:
+ * This symbol, if defined, indicates that the pthread_yield
+ * routine is available to yield the execution of the current
+ * thread. sched_yield is preferable to pthread_yield.
+ */
+/* SCHED_YIELD:
+ * This symbol defines the way to yield the execution of
+ * the current thread. Known ways are sched_yield,
+ * pthread_yield, and pthread_yield with NULL.
+ */
+/* HAS_SCHED_YIELD:
+ * This symbol, if defined, indicates that the sched_yield
+ * routine is available to yield the execution of the current
+ * thread. sched_yield is preferable to pthread_yield.
+ */
+/*#define HAS_PTHREAD_YIELD /**/
+#define SCHED_YIELD /**/
+/*#define HAS_SCHED_YIELD /**/
+
+/* HAS_SAFE_BCOPY:
+ * This symbol, if defined, indicates that the bcopy routine is available
+ * to copy potentially overlapping memory blocks. Otherwise you should
+ * probably use memmove() or memcpy(). If neither is defined, roll your
+ * own version.
+ */
+/*#define HAS_SAFE_BCOPY /**/
+
+/* HAS_SAFE_MEMCPY:
+ * This symbol, if defined, indicates that the memcpy routine is available
+ * to copy potentially overlapping memory blocks. Otherwise you should
+ * probably use memmove() or memcpy(). If neither is defined, roll your
+ * own version.
+ */
+/*#define HAS_SAFE_MEMCPY /**/
+
+/* HAS_SANE_MEMCMP:
+ * This symbol, if defined, indicates that the memcmp routine is available
+ * and can be used to compare relative magnitudes of chars with their high
+ * bits set. If it is not defined, roll your own version.
+ */
+#define HAS_SANE_MEMCMP /**/
+
+/* HAS_SEM:
+ * This symbol, if defined, indicates that the entire sem*(2) library is
+ * supported.
+ */
+/*#define HAS_SEM /**/
+
+/* HAS_SETGRENT:
+ * This symbol, if defined, indicates that the setgrent routine is
+ * available for initializing sequential access of the group database.
+ */
+/*#define HAS_SETGRENT /**/
+
+/* HAS_SETGROUPS:
+ * This symbol, if defined, indicates that the setgroups() routine is
+ * available to set the list of process groups. If unavailable, multiple
+ * groups are probably not supported.
+ */
+/*#define HAS_SETGROUPS /**/
+
+/* HAS_SETHOSTENT:
+ * This symbol, if defined, indicates that the sethostent() routine is
+ * available.
+ */
+#define HAS_SETHOSTENT /**/
+
+/* HAS_SETNETENT:
+ * This symbol, if defined, indicates that the setnetent() routine is
+ * available.
+ */
+#define HAS_SETNETENT /**/
+
+/* HAS_SETPROTOENT:
+ * This symbol, if defined, indicates that the setprotoent() routine is
+ * available.
+ */
+#define HAS_SETPROTOENT /**/
+
+/* HAS_SETPWENT:
+ * This symbol, if defined, indicates that the setpwent routine is
+ * available for initializing sequential access of the passwd database.
+ */
+/*#define HAS_SETPWENT /**/
+
+/* HAS_SETSERVENT:
+ * This symbol, if defined, indicates that the setservent() routine is
+ * available.
+ */
+#define HAS_SETSERVENT /**/
+
+/* HAS_SETSPENT:
+ * This symbol, if defined, indicates that the setspent system call is
+ * available to initialize the scan of SysV shadow password entries.
+ */
+/*#define HAS_SETSPENT /**/
+
+/* HAS_SETVBUF:
+ * This symbol, if defined, indicates that the setvbuf routine is
+ * available to change buffering on an open stdio stream.
+ * to a line-buffered mode.
+ */
+#define HAS_SETVBUF /**/
+
+/* USE_SFIO:
+ * This symbol, if defined, indicates that sfio should
+ * be used.
+ */
+/*#define USE_SFIO /**/
/* HAS_SHM:
* This symbol, if defined, indicates that the entire shm*(2) library is
*/
/*#define HAS_SHM /**/
+/* HAS_SIGACTION:
+ * This symbol, if defined, indicates that Vr4's sigaction() routine
+ * is available.
+ */
+/*#define HAS_SIGACTION /**/
+
+/* HAS_SIGSETJMP:
+ * This variable indicates to the C program that the sigsetjmp()
+ * routine is available to save the calling process's registers
+ * and stack environment for later use by siglongjmp(), and
+ * to optionally save the process's signal mask. See
+ * Sigjmp_buf, Sigsetjmp, and Siglongjmp.
+ */
+/* Sigjmp_buf:
+ * This is the buffer type to be used with Sigsetjmp and Siglongjmp.
+ */
+/* Sigsetjmp:
+ * This macro is used in the same way as sigsetjmp(), but will invoke
+ * traditional setjmp() if sigsetjmp isn't available.
+ * See HAS_SIGSETJMP.
+ */
+/* Siglongjmp:
+ * This macro is used in the same way as siglongjmp(), but will invoke
+ * traditional longjmp() if siglongjmp isn't available.
+ * See HAS_SIGSETJMP.
+ */
+/*#define HAS_SIGSETJMP /**/
+#ifdef HAS_SIGSETJMP
+#define Sigjmp_buf sigjmp_buf
+#define Sigsetjmp(buf,save_mask) sigsetjmp((buf),(save_mask))
+#define Siglongjmp(buf,retval) siglongjmp((buf),(retval))
+#else
+#define Sigjmp_buf jmp_buf
+#define Sigsetjmp(buf,save_mask) setjmp((buf))
+#define Siglongjmp(buf,retval) longjmp((buf),(retval))
+#endif
+
/* HAS_SOCKET:
* This symbol, if defined, indicates that the BSD socket interface is
* supported.
/*#define HAS_MSG_PROXY /**/
/*#define HAS_SCM_RIGHTS /**/
+/* HAS_SQRTL:
+ * This symbol, if defined, indicates that the sqrtl routine is
+ * available to do long double square roots.
+ */
+/*#define HAS_SQRTL /**/
+
/* USE_STAT_BLOCKS:
* This symbol is defined if this system has a stat structure declaring
* st_blksize and st_blocks.
/*#define USE_STAT_BLOCKS /**/
#endif
+/* HAS_STRUCT_STATFS_F_FLAGS:
+ * This symbol, if defined, indicates that the struct statfs
+ * does have the f_flags member containing the mount flags of
+ * the filesystem containing the file.
+ * This kind of struct statfs is coming from <sys/mount.h> (BSD 4.3),
+ * not from <sys/statfs.h> (SYSV). Older BSDs (like Ultrix) do not
+ * have statfs() and struct statfs, they have ustat() and getmnt()
+ * with struct ustat and struct fs_data.
+ */
+/*#define HAS_STRUCT_STATFS_F_FLAGS /**/
+
+/* HAS_STRUCT_STATFS:
+ * This symbol, if defined, indicates that the struct statfs
+ * to do statfs() is supported.
+ */
+/*#define HAS_STRUCT_STATFS /**/
+
+/* HAS_FSTATVFS:
+ * This symbol, if defined, indicates that the fstatvfs routine is
+ * available to stat filesystems by file descriptors.
+ */
+/*#define HAS_FSTATVFS /**/
+
+/* USE_STDIO_PTR:
+ * This symbol is defined if the _ptr and _cnt fields (or similar)
+ * of the stdio FILE structure can be used to access the stdio buffer
+ * for a file handle. If this is defined, then the FILE_ptr(fp)
+ * and FILE_cnt(fp) macros will also be defined and should be used
+ * to access these fields.
+ */
+/* FILE_ptr:
+ * This macro is used to access the _ptr field (or equivalent) of the
+ * FILE structure pointed to by its argument. This macro will always be
+ * defined if USE_STDIO_PTR is defined.
+ */
+/* STDIO_PTR_LVALUE:
+ * This symbol is defined if the FILE_ptr macro can be used as an
+ * lvalue.
+ */
+/* FILE_cnt:
+ * This macro is used to access the _cnt field (or equivalent) of the
+ * FILE structure pointed to by its argument. This macro will always be
+ * defined if USE_STDIO_PTR is defined.
+ */
+/* STDIO_CNT_LVALUE:
+ * This symbol is defined if the FILE_cnt macro can be used as an
+ * lvalue.
+ */
+#define USE_STDIO_PTR /**/
+#ifdef USE_STDIO_PTR
+#define FILE_ptr(fp) ((fp)->_ptr)
+#define STDIO_PTR_LVALUE /**/
+#define FILE_cnt(fp) ((fp)->_cnt)
+#define STDIO_CNT_LVALUE /**/
+#endif
+
+/* USE_STDIO_BASE:
+ * This symbol is defined if the _base field (or similar) of the
+ * stdio FILE structure can be used to access the stdio buffer for
+ * a file handle. If this is defined, then the FILE_base(fp) macro
+ * will also be defined and should be used to access this field.
+ * Also, the FILE_bufsiz(fp) macro will be defined and should be used
+ * to determine the number of bytes in the buffer. USE_STDIO_BASE
+ * will never be defined unless USE_STDIO_PTR is.
+ */
+/* FILE_base:
+ * This macro is used to access the _base field (or equivalent) of the
+ * FILE structure pointed to by its argument. This macro will always be
+ * defined if USE_STDIO_BASE is defined.
+ */
+/* FILE_bufsiz:
+ * This macro is used to determine the number of bytes in the I/O
+ * buffer pointed to by _base field (or equivalent) of the FILE
+ * structure pointed to its argument. This macro will always be defined
+ * if USE_STDIO_BASE is defined.
+ */
+#define USE_STDIO_BASE /**/
+#ifdef USE_STDIO_BASE
+#define FILE_base(fp) ((fp)->_base)
+#define FILE_bufsiz(fp) ((fp)->_cnt + (fp)->_ptr - (fp)->_base)
+#endif
+
/* HAS_STRERROR:
* This symbol, if defined, indicates that the strerror routine is
* available to translate error numbers to strings. See the writeup
#define HAS_SYS_ERRLIST /**/
#define Strerror(e) strerror(e)
-/* HAS_UNION_SEMUN:
- * This symbol, if defined, indicates that the union semun is
- * defined by including <sys/sem.h>. If not, the user code
- * probably needs to define it as:
- * union semun {
- * int val;
- * struct semid_ds *buf;
- * unsigned short *array;
- * }
- */
-/* USE_SEMCTL_SEMUN:
- * This symbol, if defined, indicates that union semun is
- * used for semctl IPC_STAT.
+/* HAS_STRTOLD:
+ * This symbol, if defined, indicates that the strtold routine is
+ * available to convert strings to long doubles.
*/
-/* USE_SEMCTL_SEMID_DS:
- * This symbol, if defined, indicates that struct semid_ds * is
- * used for semctl IPC_STAT.
+/*#define HAS_STRTOLD /**/
+
+/* HAS_STRTOLL:
+ * This symbol, if defined, indicates that the strtoll routine is
+ * available to convert strings to long longs.
*/
-/*#define HAS_UNION_SEMUN /**/
-/*#define USE_SEMCTL_SEMUN /**/
-/*#define USE_SEMCTL_SEMID_DS /**/
+/*#define HAS_STRTOLL /**/
-/* HAS_VFORK:
+/* HAS_STRTOULL:
+ * This symbol, if defined, indicates that the strtoull routine is
+ * available to convert strings to unsigned long longs.
+ */
+/*#define HAS_STRTOULL /**/
+
+/* HAS_STRTOUQ:
+ * This symbol, if defined, indicates that the strtouq routine is
+ * available to convert strings to unsigned long longs (quads).
+ */
+/*#define HAS_STRTOUQ /**/
+
+/* HAS_TELLDIR_PROTO:
+ * This symbol, if defined, indicates that the system provides
+ * a prototype for the telldir() function. Otherwise, it is up
+ * to the program to supply one. A good guess is
+ * extern long telldir _((DIR*));
+ */
+/*#define HAS_TELLDIR_PROTO /**/
+
+/* Time_t:
+ * This symbol holds the type returned by time(). It can be long,
+ * or time_t on BSD sites (in which case <sys/types.h> should be
+ * included).
+ */
+#define Time_t time_t /* Time type */
+
+/* HAS_TIMES:
+ * This symbol, if defined, indicates that the times() routine exists.
+ * Note that this became obsolete on some systems (SUNOS), which now
+ * use getrusage(). It may be necessary to include <sys/times.h>.
+ */
+#define HAS_TIMES /**/
+
+/* HAS_UNION_SEMUN:
+ * This symbol, if defined, indicates that the union semun is
+ * defined by including <sys/sem.h>. If not, the user code
+ * probably needs to define it as:
+ * union semun {
+ * int val;
+ * struct semid_ds *buf;
+ * unsigned short *array;
+ * }
+ */
+/* USE_SEMCTL_SEMUN:
+ * This symbol, if defined, indicates that union semun is
+ * used for semctl IPC_STAT.
+ */
+/* USE_SEMCTL_SEMID_DS:
+ * This symbol, if defined, indicates that struct semid_ds * is
+ * used for semctl IPC_STAT.
+ */
+/*#define HAS_UNION_SEMUN /**/
+/*#define USE_SEMCTL_SEMUN /**/
+/*#define USE_SEMCTL_SEMID_DS /**/
+
+/* HAS_USTAT:
+ * This symbol, if defined, indicates that the ustat system call is
+ * available to query file system statistics by dev_t.
+ */
+/*#define HAS_USTAT /**/
+
+/* HAS_VFORK:
* This symbol, if defined, indicates that vfork() exists.
*/
/*#define HAS_VFORK /**/
*/
#define Signal_t void /* Signal handler's return type */
+/* HAS_VPRINTF:
+ * This symbol, if defined, indicates that the vprintf routine is available
+ * to printf with a pointer to an argument list. If unavailable, you
+ * may need to write your own, probably in terms of _doprnt().
+ */
+/* USE_CHAR_VSPRINTF:
+ * This symbol is defined if this system has vsprintf() returning type
+ * (char*). The trend seems to be to declare it as "int vsprintf()". It
+ * is up to the package author to declare vsprintf correctly based on the
+ * symbol.
+ */
+#define HAS_VPRINTF /**/
+/*#define USE_CHAR_VSPRINTF /**/
+
+/* USE_DYNAMIC_LOADING:
+ * This symbol, if defined, indicates that dynamic loading of
+ * some sort is available.
+ */
+/*#define USE_DYNAMIC_LOADING /**/
+
+/* DOUBLESIZE:
+ * This symbol contains the size of a double, so that the C preprocessor
+ * can make decisions based on it.
+ */
+#define DOUBLESIZE 8 /**/
+
+/* EBCDIC:
+ * This symbol, if defined, indicates that this system uses
+ * EBCDIC encoding.
+ */
+/*#define EBCDIC /**/
+
+/* FFLUSH_NULL:
+ * This symbol, if defined, tells that fflush(NULL) does flush
+ * all pending stdio output.
+ */
+/* FFLUSH_ALL:
+ * This symbol, if defined, tells that to flush
+ * all pending stdio output one must loop through all
+ * the stdio file handles stored in an array and fflush them.
+ * Note that if fflushNULL is defined, fflushall will not
+ * even be probed for and will be left undefined.
+ */
+#define FFLUSH_NULL /**/
+/*#define FFLUSH_ALL /**/
+
+/* Fpos_t:
+ * This symbol holds the type used to declare file positions in libc.
+ * It can be fpos_t, long, uint, etc... It may be necessary to include
+ * <sys/types.h> to get any typedef'ed information.
+ */
+#define Fpos_t fpos_t /* File position type */
+
+/* Gid_t_f:
+ * This symbol defines the format string used for printing a Gid_t.
+ */
+#define Gid_t_f "d" /**/
+
+/* Gid_t_size:
+ * This symbol holds the size of a Gid_t in bytes.
+ */
+#define Gid_t_size 4 /* GID size */
+
+/* Gid_t:
+ * This symbol holds the return type of getgid() and the type of
+ * argument to setrgid() and related functions. Typically,
+ * it is the type of group ids in the kernel. It can be int, ushort,
+ * uid_t, etc... It may be necessary to include <sys/types.h> to get
+ * any typedef'ed information.
+ */
+#define Gid_t gid_t /* Type for getgid(), etc... */
+
/* Groups_t:
* This symbol holds the type used for the second argument to
* getgroups() and setgropus(). Usually, this is the same as
#define Groups_t gid_t /* Type for 2nd arg to [sg]etgroups() */
#endif
+/* DB_Prefix_t:
+ * This symbol contains the type of the prefix structure element
+ * in the <db.h> header file. In older versions of DB, it was
+ * int, while in newer ones it is u_int32_t.
+ */
+/* DB_Hash_t:
+ * This symbol contains the type of the prefix structure element
+ * in the <db.h> header file. In older versions of DB, it was
+ * int, while in newer ones it is size_t.
+ */
+#define DB_Hash_t int /**/
+#define DB_Prefix_t int /**/
+
/* I_GRP:
* This symbol, if defined, indicates to the C program that it should
* include <grp.h>.
/*#define I_GRP /**/
/*#define GRPASSWD /**/
+/* I_ICONV:
+ * This symbol, if defined, indicates that <iconv.h> exists and
+ * should be included.
+ */
+/*#define I_ICONV /**/
+
+/* I_INTTYPES:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <inttypes.h>.
+ */
+/*#define I_INTTYPES /**/
+
+/* I_MACH_CTHREADS:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <mach/cthreads.h>.
+ */
+/*#define I_MACH_CTHREADS /**/
+
+/* I_MNTENT:
+ * This symbol, if defined, indicates that <mntent.h> exists and
+ * should be included.
+ */
+/*#define I_MNTENT /**/
+
/* I_NETDB:
* This symbol, if defined, indicates that <netdb.h> exists and
* should be included.
*/
#define I_NETDB /**/
+/* I_NETINET_TCP:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <netinet/tcp.h>.
+ */
+/*#define I_NETINET_TCP /**/
+
+/* I_POLL:
+ * This symbol, if defined, indicates that <poll.h> exists and
+ * should be included.
+ */
+/*#define I_POLL /**/
+
+/* I_PTHREAD:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <pthread.h>.
+ */
+/*#define I_PTHREAD /**/
+
/* I_PWD:
* This symbol, if defined, indicates to the C program that it should
* include <pwd.h>.
/*#define PWGECOS /**/
/*#define PWPASSWD /**/
-/* I_SYSUIO:
- * This symbol, if defined, indicates that <sys/uio.h> exists and
+/* I_SHADOW:
+ * This symbol, if defined, indicates that <shadow.h> exists and
* should be included.
*/
-/*#define I_SYSUIO /**/
+/*#define I_SHADOW /**/
-/* Free_t:
- * This variable contains the return type of free(). It is usually
- * void, but occasionally int.
- */
-/* Malloc_t:
- * This symbol is the type of pointer returned by malloc and realloc.
+/* I_SOCKS:
+ * This symbol, if defined, indicates that <socks.h> exists and
+ * should be included.
*/
-#define Malloc_t void * /**/
-#define Free_t void /**/
+/*#define I_SOCKS /**/
-/* MYMALLOC:
- * This symbol, if defined, indicates that we're using our own malloc.
+/* I_SYSLOG:
+ * This symbol, if defined, indicates that <syslog.h> exists and
+ * should be included.
*/
-/*#define MYMALLOC /**/
+# I_SYSLOG /**/
-/* SIG_NAME:
- * This symbol contains a list of signal names in order of
- * signal number. This is intended
- * to be used as a static array initialization, like this:
- * char *sig_name[] = { SIG_NAME };
- * The signals in the list are separated with commas, and each signal
- * is surrounded by double quotes. There is no leading SIG in the signal
- * name, i.e. SIGQUIT is known as "QUIT".
- * Gaps in the signal numbers (up to NSIG) are filled in with NUMnn,
- * etc., where nn is the actual signal number (e.g. NUM37).
- * The signal number for sig_name[i] is stored in sig_num[i].
- * The last element is 0 to terminate the list with a NULL. This
- * corresponds to the 0 at the end of the sig_num list.
+/* I_SYSMODE:
+ * This symbol, if defined, indicates that <sys/mode.h> exists and
+ * should be included.
*/
-/* SIG_NUM:
- * This symbol contains a list of signal numbers, in the same order as the
- * SIG_NAME list. It is suitable for static array initialization, as in:
- * int sig_num[] = { SIG_NUM };
- * The signals in the list are separated with commas, and the indices
- * within that list and the SIG_NAME list match, so it's easy to compute
- * the signal name from a number or vice versa at the price of a small
- * dynamic linear lookup.
- * Duplicates are allowed, but are moved to the end of the list.
- * The signal number corresponding to sig_name[i] is sig_number[i].
- * if (i < NSIG) then sig_number[i] == i.
- * The last element is 0, corresponding to the 0 at the end of
- * the sig_name list.
+# I_SYSMODE /**/
+
+/* I_SYS_MOUNT:
+ * This symbol, if defined, indicates that <sys/mount.h> exists and
+ * should be included.
*/
-#define SIG_NAME "ZERO","ABRT","FPE","ILL","INT","SEGV","TERM","USR1","USR2","IO","HUP","URG","ALRM","KILL","PIPE","QUIT","CHLD","CONT","STOP","TSTP","TTIN","TTOU","BUS","RT1","RT2","RT3","RT4","RT5","RT6","RT7","RT8",0 /**/
-#define SIG_NUM 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,0 /**/
+/*#define I_SYS_MOUNT /**/
-/* VOIDFLAGS:
- * This symbol indicates how much support of the void type is given by this
- * compiler. What various bits mean:
- *
- * 1 = supports declaration of void
- * 2 = supports arrays of pointers to functions returning void
- * 4 = supports comparisons between pointers to void functions and
- * addresses of void functions
- * 8 = suports declaration of generic void pointers
- *
- * The package designer should define VOIDUSED to indicate the requirements
- * of the package. This can be done either by #defining VOIDUSED before
- * including config.h, or by defining defvoidused in Myinit.U. If the
- * latter approach is taken, only those flags will be tested. If the
- * level of void support necessary is not present, defines void to int.
+/* I_SYS_STATFS:
+ * This symbol, if defined, indicates that <sys/statfs.h> exists.
*/
-#ifndef VOIDUSED
-#define VOIDUSED 15
-#endif
-#define VOIDFLAGS 15
-#if (VOIDFLAGS & VOIDUSED) != VOIDUSED
-#define void int /* is void to be avoided? */
-#define M_VOID /* Xenix strikes again */
-#endif
+/*#define I_SYS_STATFS /**/
-/* HAS_ATOLF:
- * This symbol, if defined, indicates that the atolf routine is
- * available to convert strings into long doubles.
+/* I_SYS_STATVFS:
+ * This symbol, if defined, indicates that <sys/statvfs.h> exists and
+ * should be included.
*/
-/*#define HAS_ATOLF /**/
+/*#define I_SYS_STATVFS /**/
-/* HAS_ATOLL:
- * This symbol, if defined, indicates that the atoll routine is
- * available to convert strings into long longs.
+/* I_SYSUIO:
+ * This symbol, if defined, indicates that <sys/uio.h> exists and
+ * should be included.
*/
-/*#define HAS_ATOLL /**/
+/*#define I_SYSUIO /**/
-/* PERL_BINCOMPAT_5005:
- * This symbol, if defined, indicates that Perl 5.006 should be
- * binary-compatible with Perl 5.005. This is impossible for builds
- * that use features like threads and multiplicity it is always $undef
- * for those versions.
+/* I_SYSUTSNAME:
+ * This symbol, if defined, indicates that <sys/utsname.h> exists and
+ * should be included.
*/
-/*#define PERL_BINCOMPAT_5005 /**/
+# I_SYSUTSNAME /**/
-/* DLSYM_NEEDS_UNDERSCORE:
- * This symbol, if defined, indicates that we need to prepend an
- * underscore to the symbol name before calling dlsym(). This only
- * makes sense if you *have* dlsym, which we will presume is the
- * case if you're using dl_dlopen.xs.
+/* I_SYS_VFS:
+ * This symbol, if defined, indicates that <sys/vfs.h> exists and
+ * should be included.
*/
-/*#define DLSYM_NEEDS_UNDERSCORE /**/
+/*#define I_SYS_VFS /**/
-/* HAS_ENDSPENT:
- * This symbol, if defined, indicates that the endspent system call is
- * available to finalize the scan of SysV shadow password entries.
+/* I_TIME:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <time.h>.
*/
-/*#define HAS_ENDSPENT /**/
-
-/* HAS_STRUCT_FS_DATA:
- * This symbol, if defined, indicates that the struct fs_data
- * to do statfs() is supported.
+/* I_SYS_TIME:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <sys/time.h>.
*/
-/*#define HAS_STRUCT_FS_DATA /**/
-
-/* HAS_FSEEKO:
- * This symbol, if defined, indicates that the fseeko routine is
- * available to fseek beyond 32 bits (useful for ILP32 hosts).
+/* I_SYS_TIME_KERNEL:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <sys/time.h> with KERNEL defined.
*/
-/*#define HAS_FSEEKO /**/
+/*#define I_TIME /**/
+#define I_SYS_TIME /**/
+/*#define I_SYS_TIME_KERNEL /**/
-/* HAS_FSTATFS:
- * This symbol, if defined, indicates that the fstatfs routine is
- * available to stat filesystems by file descriptors.
- */
-/*#define HAS_FSTATFS /**/
-/* HAS_FTELLO:
- * This symbol, if defined, indicates that the ftello routine is
- * available to ftell beyond 32 bits (useful for ILP32 hosts).
+/* I_USTAT:
+ * This symbol, if defined, indicates that <ustat.h> exists and
+ * should be included.
*/
-/*#define HAS_FTELLO /**/
+/*#define I_USTAT /**/
-/* HAS_GETMNT:
- * This symbol, if defined, indicates that the getmnt routine is
- * available to get filesystem mount info by filename.
+/* PERL_INC_VERSION_LIST:
+ * This variable specifies the list of subdirectories in over
+ * which perl.c:incpush() and lib/lib.pm will automatically
+ * search when adding directories to @INC, in a format suitable
+ * for a C initialization string. See the inc_version_list entry
+ * in Porting/Glossary for more details.
*/
-/*#define HAS_GETMNT /**/
+#define PERL_INC_VERSION_LIST /**/
-/* HAS_GETMNTENT:
- * This symbol, if defined, indicates that the getmntent routine is
- * available to iterate through mounted file systems to get their info.
+/* INSTALL_USR_BIN_PERL:
+ * This symbol, if defined, indicates that Perl is to be installed
+ * also as /usr/bin/perl.
*/
-/*#define HAS_GETMNTENT /**/
+/*#define INSTALL_USR_BIN_PERL /**/
-/* HAS_GETSPENT:
- * This symbol, if defined, indicates that the getspent system call is
- * available to retrieve SysV shadow password entries sequentially.
+/* PERL_PRIfldbl:
+ * This symbol, if defined, contains the string used by stdio to
+ * format long doubles (format 'f') for output.
*/
-/*#define HAS_GETSPENT /**/
-
-/* HAS_GETSPNAM:
- * This symbol, if defined, indicates that the getspnam system call is
- * available to retrieve SysV shadow password entries by name.
+/* PERL_PRIgldbl:
+ * This symbol, if defined, contains the string used by stdio to
+ * format long doubles (format 'g') for output.
*/
-/*#define HAS_GETSPNAM /**/
+#define PERL_PRIfldbl "Lf" /**/
+#define PERL_PRIgldbl "Lg" /**/
-/* HAS_HASMNTOPT:
- * This symbol, if defined, indicates that the hasmntopt routine is
- * available to query the mount options of file systems.
+/* Off_t:
+ * This symbol holds the type used to declare offsets in the kernel.
+ * It can be int, long, off_t, etc... It may be necessary to include
+ * <sys/types.h> to get any typedef'ed information.
*/
-/*#define HAS_HASMNTOPT /**/
-
-/* HAS_INT64_T:
- * This symbol will defined if the C compiler supports int64_t.
- * Usually the <inttypes.h> needs to be included, but sometimes
- * <sys/types.h> is enough.
+/* LSEEKSIZE:
+ * This symbol holds the number of bytes used by the Off_t.
*/
-/*#define HAS_INT64_T /**/
-
-/* HAS_LDBL_DIG:
- * This symbol, if defined, indicates that this system's <float.h>
- * or <limits.h> defines the symbol LDBL_DIG, which is the number
- * of significant digits in a long double precision number. Unlike
- * for DBL_DIG, there's no good guess for LDBL_DIG if it is undefined.
+/* Off_t_size:
+ * This symbol holds the number of bytes used by the Off_t.
*/
-#define HAS_LDBL_DIG /* */
+#define Off_t off_t /* <offset> type */
+#define LSEEKSIZE 4 /* <offset> size */
+#define Off_t_size 4 /* <offset> size */
-/* HAS_SETSPENT:
- * This symbol, if defined, indicates that the setspent system call is
- * available to initialize the scan of SysV shadow password entries.
+/* Free_t:
+ * This variable contains the return type of free(). It is usually
+ * void, but occasionally int.
*/
-/*#define HAS_SETSPENT /**/
-
-/* USE_SFIO:
- * This symbol, if defined, indicates that sfio should
- * be used.
+/* Malloc_t:
+ * This symbol is the type of pointer returned by malloc and realloc.
*/
-/*#define USE_SFIO /**/
+#define Malloc_t void * /**/
+#define Free_t void /**/
-/* HAS_SQRTL:
- * This symbol, if defined, indicates that the sqrtl routine is
- * available to do long double square roots.
+/* MYMALLOC:
+ * This symbol, if defined, indicates that we're using our own malloc.
*/
-/*#define HAS_SQRTL /**/
+/*#define MYMALLOC /**/
-/* HAS_STRUCT_STATFS_F_FLAGS:
- * This symbol, if defined, indicates that the struct statfs
- * does have the f_flags member containing the mount flags of
- * the filesystem containing the file.
- * This kind of struct statfs is coming from <sys/mount.h> (BSD 4.3),
- * not from <sys/statfs.h> (SYSV). Older BSDs (like Ultrix) do not
- * have statfs() and struct statfs, they have ustat() and getmnt()
- * with struct ustat and struct fs_data.
+/* Mode_t:
+ * This symbol holds the type used to declare file modes
+ * for systems calls. It is usually mode_t, but may be
+ * int or unsigned short. It may be necessary to include <sys/types.h>
+ * to get any typedef'ed information.
*/
-/*#define HAS_STRUCT_STATFS_F_FLAGS /**/
+#define Mode_t mode_t /* file mode parameter for system calls */
-/* HAS_STRUCT_STATFS:
- * This symbol, if defined, indicates that the struct statfs
- * to do statfs() is supported.
+/* VAL_O_NONBLOCK:
+ * This symbol is to be used during open() or fcntl(F_SETFL) to turn on
+ * non-blocking I/O for the file descriptor. Note that there is no way
+ * back, i.e. you cannot turn it blocking again this way. If you wish to
+ * alternatively switch between blocking and non-blocking, use the
+ * ioctl(FIOSNBIO) call instead, but that is not supported by all devices.
*/
-/*#define HAS_STRUCT_STATFS /**/
-
-/* HAS_FSTATVFS:
- * This symbol, if defined, indicates that the fstatvfs routine is
- * available to stat filesystems by file descriptors.
+/* VAL_EAGAIN:
+ * This symbol holds the errno error code set by read() when no data was
+ * present on the non-blocking file descriptor.
*/
-/*#define HAS_FSTATVFS /**/
-
-/* HAS_TELLDIR_PROTO:
- * This symbol, if defined, indicates that the system provides
- * a prototype for the telldir() function. Otherwise, it is up
- * to the program to supply one. A good guess is
- * extern long telldir _((DIR*));
+/* RD_NODATA:
+ * This symbol holds the return code from read() when no data is present
+ * on the non-blocking file descriptor. Be careful! If EOF_NONBLOCK is
+ * not defined, then you can't distinguish between no data and EOF by
+ * issuing a read(). You'll have to find another way to tell for sure!
*/
-/*#define HAS_TELLDIR_PROTO /**/
-
-/* HAS_USTAT:
- * This symbol, if defined, indicates that the ustat system call is
- * available to query file system statistics by dev_t.
+/* EOF_NONBLOCK:
+ * This symbol, if defined, indicates to the C program that a read() on
+ * a non-blocking file descriptor will return 0 on EOF, and not the value
+ * held in RD_NODATA (-1 usually, in that case!).
*/
-/*#define HAS_USTAT /**/
+#define VAL_O_NONBLOCK O_NONBLOCK
+#define VAL_EAGAIN EAGAIN
+#define RD_NODATA -1
+#define EOF_NONBLOCK
-/* USE_DYNAMIC_LOADING:
- * This symbol, if defined, indicates that dynamic loading of
- * some sort is available.
+/* Netdb_host_t:
+ * This symbol holds the type used for the 1st argument
+ * to gethostbyaddr().
*/
-/*#define USE_DYNAMIC_LOADING /**/
-
-/* FFLUSH_NULL:
- * This symbol, if defined, tells that fflush(NULL) does flush
- * all pending stdio output.
+/* Netdb_hlen_t:
+ * This symbol holds the type used for the 2nd argument
+ * to gethostbyaddr().
*/
-/* FFLUSH_ALL:
- * This symbol, if defined, tells that to flush
- * all pending stdio output one must loop through all
- * the stdio file handles stored in an array and fflush them.
- * Note that if fflushNULL is defined, fflushall will not
- * even be probed for and will be left undefined.
+/* Netdb_name_t:
+ * This symbol holds the type used for the argument to
+ * gethostbyname().
*/
-#define FFLUSH_NULL /**/
-/*#define FFLUSH_ALL /**/
+/* Netdb_net_t:
+ * This symbol holds the type used for the 1st argument to
+ * getnetbyaddr().
+ */
+#define Netdb_host_t char * /**/
+#define Netdb_hlen_t int /**/
+#define Netdb_name_t char * /**/
+#define Netdb_net_t long /**/
-/* DB_Prefix_t:
- * This symbol contains the type of the prefix structure element
- * in the <db.h> header file. In older versions of DB, it was
- * int, while in newer ones it is u_int32_t.
- */
-/* DB_Hash_t:
- * This symbol contains the type of the prefix structure element
- * in the <db.h> header file. In older versions of DB, it was
- * int, while in newer ones it is size_t.
- */
-#define DB_Hash_t int /**/
-#define DB_Prefix_t int /**/
-
-/* I_INTTYPES:
- * This symbol, if defined, indicates to the C program that it should
- * include <inttypes.h>.
- */
-/*#define I_INTTYPES /**/
-
-/* I_MNTENT:
- * This symbol, if defined, indicates that <mntent.h> exists and
- * should be included.
- */
-/*#define I_MNTENT /**/
-
-/* I_NETINET_TCP:
- * This symbol, if defined, indicates to the C program that it should
- * include <netinet/tcp.h>.
- */
-/*#define I_NETINET_TCP /**/
-
-/* I_POLL:
- * This symbol, if defined, indicates that <poll.h> exists and
- * should be included.
- */
-/*#define I_POLL /**/
-
-/* I_SHADOW:
- * This symbol, if defined, indicates that <shadow.h> exists and
- * should be included.
- */
-/*#define I_SHADOW /**/
-
-/* I_SOCKS:
- * This symbol, if defined, indicates that <socks.h> exists and
- * should be included.
- */
-/*#define I_SOCKS /**/
-
-/* I_SYS_MOUNT:
- * This symbol, if defined, indicates that <sys/mount.h> exists and
- * should be included.
- */
-/*#define I_SYS_MOUNT /**/
-
-/* I_SYS_STATFS:
- * This symbol, if defined, indicates that <sys/statfs.h> exists.
- */
-/*#define I_SYS_STATFS /**/
-
-/* I_SYS_STATVFS:
- * This symbol, if defined, indicates that <sys/statvfs.h> exists and
- * should be included.
- */
-/*#define I_SYS_STATVFS /**/
-
-/* I_SYS_VFS:
- * This symbol, if defined, indicates that <sys/vfs.h> exists and
- * should be included.
- */
-/*#define I_SYS_VFS /**/
-
-/* I_USTAT:
- * This symbol, if defined, indicates that <ustat.h> exists and
- * should be included.
- */
-/*#define I_USTAT /**/
-
-/* HAS_OFF64_T:
- * This symbol will be defined if the C compiler supports off64_t.
- */
-/* HAS_FPOS64_T:
- * This symbol will be defined if the C compiler supports fpos64_t.
- */
-/*#define HAS_OFF64_T /**/
-/*#define HAS_FPOS64_T /**/
-
-/* PERL_PRIfldbl:
- * This symbol, if defined, contains the string used by stdio to
- * format long doubles (format 'f') for output.
- */
-/* PERL_PRIgldbl:
- * This symbol, if defined, contains the string used by stdio to
- * format long doubles (format 'g') for output.
- */
-#define PERL_PRIfldbl "Lf" /**/
-#define PERL_PRIgldbl "Lg" /**/
-
-/* IVTYPE:
- * This symbol defines the C type used for Perl's IV.
+/* IVTYPE:
+ * This symbol defines the C type used for Perl's IV.
*/
/* UVTYPE:
* This symbol defines the C type used for Perl's UV.
/* U64SIZE:
* This symbol contains the sizeof(U64).
*/
+/* NV_PRESERVES_UV:
+ * This symbol, if defined, indicates that a variable of type NVTYPE
+ * can preserve all the bit of a variable of type UVSIZE.
+ */
#define IVTYPE int /**/
#define UVTYPE unsigned int /**/
#define I8TYPE char /**/
#define I64SIZE _error_ /**/
#define U64SIZE _error_ /**/
#endif
+#define NV_PRESERVES_UV
/* IVdf:
* This symbol defines the format string used for printing a Perl IV
#define UVof "o" /**/
#define UVxf "x" /**/
-/* SELECT_MIN_BITS:
- * This symbol holds the minimum number of bits operated by select.
- * That is, if you do select(n, ...), how many bits at least will be
- * cleared in the masks if some activity is detected. Usually this
- * is either n or 32*ceil(n/32), especially many little-endians do
- * the latter. This is only useful if you have select(), naturally.
- */
-#define SELECT_MIN_BITS 1 /**/
-
-/* STARTPERL:
- * This variable contains the string to put in front of a perl
- * script to make sure (one hopes) that it runs with perl and not
- * some shell.
- */
-#define STARTPERL "!perl.pm" /**/
-
-/* HAS_STDIO_STREAM_ARRAY:
- * This symbol, if defined, tells that there is an array
- * holding the stdio streams.
- */
-/* STDIO_STREAM_ARRAY:
- * This symbol tells the name of the array holding the stdio streams.
- * Usual values include _iob, __iob, and __sF.
+/* Pid_t:
+ * This symbol holds the type used to declare process ids in the kernel.
+ * It can be int, uint, pid_t, etc... It may be necessary to include
+ * <sys/types.h> to get any typedef'ed information.
*/
-#define HAS_STDIO_STREAM_ARRAY /**/
-#define STDIO_STREAM_ARRAY _iob
+#define Pid_t pid_t /* PID type */
-/* HAS_STRTOULL:
- * This symbol, if defined, indicates that the strtoull routine is
- * available to convert strings into unsigned long longs.
+/* PRIVLIB:
+ * This symbol contains the name of the private library for this package.
+ * The library is private in the sense that it needn't be in anyone's
+ * execution path, but it should be accessible by the world. The program
+ * should be prepared to do ~ expansion.
*/
-/*#define HAS_STRTOULL /**/
-
-/* USE_64_BITS:
- * This symbol, if defined, indicates that 64-bit integers should
- * be used when available. If not defined, the native integers
- * will be used (be they 32 or 64 bits).
+/* PRIVLIB_EXP:
+ * This symbol contains the ~name expanded version of PRIVLIB, to be used
+ * in programs that are not prepared to deal with ~ expansion at run-time.
*/
-#ifndef USE_64_BITS
-/*#define USE_64_BITS /**/
-#endif
+#define PRIVLIB "/system/ported/perl/lib/5.005" /**/
+#define PRIVLIB_EXP "/system/ported/perl/lib/5.005" /**/
-/* USE_LARGE_FILES:
- * This symbol, if defined, indicates that large file support
- * should be used when available. The USE_64_BITS symbol will
- * also be turned on if necessary.
+/* PTRSIZE:
+ * This symbol contains the size of a pointer, so that the C preprocessor
+ * can make decisions based on it. It will be sizeof(void *) if
+ * the compiler supports (void *); otherwise it will be
+ * sizeof(char *).
*/
-#ifndef USE_LARGE_FILES
-/*#define USE_LARGE_FILES /**/
-#endif
+#define PTRSIZE 4 /**/
-/* USE_LONG_DOUBLE:
- * This symbol, if defined, indicates that long doubles should
- * be used when available.
+/* Drand01:
+ * This macro is to be used to generate uniformly distributed
+ * random numbers over the range [0., 1.[. You may have to supply
+ * an 'extern double drand48();' in your program since SunOS 4.1.3
+ * doesn't provide you with anything relevant in it's headers.
+ * See HAS_DRAND48_PROTO.
*/
-#ifndef USE_LONG_DOUBLE
-#define USE_LONG_DOUBLE /**/
-#endif
-
-#ifndef USE_MORE_BITS
-/*#define USE_MORE_BITS /**/
-#endif
-
-/* MULTIPLICITY:
- * This symbol, if defined, indicates that Perl should
- * be built to use multiplicity.
+/* Rand_seed_t:
+ * This symbol defines the type of the argument of the
+ * random seed function.
*/
-#ifndef MULTIPLICITY
-/*#define MULTIPLICITY /**/
-#endif
-
-/* USE_PERLIO:
- * This symbol, if defined, indicates that the PerlIO abstraction should
- * be used throughout. If not defined, stdio should be
- * used in a fully backward compatible manner.
+/* seedDrand01:
+ * This symbol defines the macro to be used in seeding the
+ * random number generator (see Drand01).
*/
-#ifndef USE_PERLIO
-/*#define USE_PERLIO /**/
-#endif
-
-/* USE_SOCKS:
- * This symbol, if defined, indicates that Perl should
- * be built to use socks.
+/* RANDBITS:
+ * This symbol indicates how many bits are produced by the
+ * function used to generate normalized random numbers.
+ * Values include 15, 16, 31, and 48.
*/
-#ifndef USE_SOCKS
-/*#define USE_SOCKS /**/
-#endif
+#define Drand01() rand()/(RAND_MAX+1) /**/
+#define Rand_seed_t unsigned int /**/
+#define seedDrand01(x) srand((Rand_seed_t)x) /**/
+#define RANDBITS 15 /**/
-/* PERL_XS_APIVERSION:
- * This variable contains the version of the oldest perl binary
- * compatible with the present perl. perl.c:incpush() and
- * lib/lib.pm will automatically search in for older
- * directories across major versions back to xs_apiversion.
- * This is only useful if you have a perl library directory tree
- * structured like the default one.
- * See INSTALL for how this works.
- * The versioned site_perl directory was introduced in 5.005,
- * so that is the lowest possible value.
- * Since this can depend on compile time options (such as
- * bincompat) it is set by Configure. Other non-default sources
- * of potential incompatibility, such as multiplicity, threads,
- * debugging, 64bits, sfio, etc., are not checked for currently,
- * though in principle we could go snooping around in old
- * Config.pm files.
- */
-/* PERL_PM_APIVERSION:
- * This variable contains the version of the oldest perl
- * compatible with the present perl. (That is, pure perl modules
- * written for pm_apiversion will still work for the current
- * version). perl.c:incpush() and lib/lib.pm will automatically
- * search in /system/ported/perl/lib/site/5.005 for older directories across major versions
- * back to pm_apiversion. This is only useful if you have a perl
- * library directory tree structured like the default one. The
- * versioned site_perl library was introduced in 5.005, so that's
- * the default setting for this variable. It's hard to imagine
- * it changing before Perl6. It is included here for symmetry
- * with xs_apiveprsion -- the searching algorithms will
- * (presumably) be similar.
- * See the INSTALL file for how this works.
+/* SELECT_MIN_BITS:
+ * This symbol holds the minimum number of bits operated by select.
+ * That is, if you do select(n, ...), how many bits at least will be
+ * cleared in the masks if some activity is detected. Usually this
+ * is either n or 32*ceil(n/32), especially many little-endians do
+ * the latter. This is only useful if you have select(), naturally.
*/
-#define PERL_XS_APIVERSION 5.00563 /* Change to string for tuples?*/
-#define PERL_PM_APIVERSION 5.00563 /* Change to string for tuples?*/
+#define SELECT_MIN_BITS 1 /**/
-/* HAS_DRAND48_PROTO:
- * This symbol, if defined, indicates that the system provides
- * a prototype for the drand48() function. Otherwise, it is up
- * to the program to supply one. A good guess is
- * extern double drand48 _((void));
+/* Select_fd_set_t:
+ * This symbol holds the type used for the 2nd, 3rd, and 4th
+ * arguments to select. Usually, this is 'fd_set *', if HAS_FD_SET
+ * is defined, and 'int *' otherwise. This is only useful if you
+ * have select(), of course.
*/
-/*#define HAS_DRAND48_PROTO /**/
+#define Select_fd_set_t fd_set * /**/
-/* HAS_GETHOST_PROTOS:
- * This symbol, if defined, indicates that <netdb.h> includes
- * prototypes for gethostent(), gethostbyname(), and
- * gethostbyaddr(). Otherwise, it is up to the program to guess
- * them. See netdbtype.U for probing for various Netdb_xxx_t types.
+/* SIG_NAME:
+ * This symbol contains a list of signal names in order of
+ * signal number. This is intended
+ * to be used as a static array initialization, like this:
+ * char *sig_name[] = { SIG_NAME };
+ * The signals in the list are separated with commas, and each signal
+ * is surrounded by double quotes. There is no leading SIG in the signal
+ * name, i.e. SIGQUIT is known as "QUIT".
+ * Gaps in the signal numbers (up to NSIG) are filled in with NUMnn,
+ * etc., where nn is the actual signal number (e.g. NUM37).
+ * The signal number for sig_name[i] is stored in sig_num[i].
+ * The last element is 0 to terminate the list with a NULL. This
+ * corresponds to the 0 at the end of the sig_num list.
*/
-#define HAS_GETHOST_PROTOS /**/
-
-/* HAS_GETNET_PROTOS:
- * This symbol, if defined, indicates that <netdb.h> includes
- * prototypes for getnetent(), getnetbyname(), and
- * getnetbyaddr(). Otherwise, it is up to the program to guess
- * them. See netdbtype.U for probing for various Netdb_xxx_t types.
+/* SIG_NUM:
+ * This symbol contains a list of signal numbers, in the same order as the
+ * SIG_NAME list. It is suitable for static array initialization, as in:
+ * int sig_num[] = { SIG_NUM };
+ * The signals in the list are separated with commas, and the indices
+ * within that list and the SIG_NAME list match, so it's easy to compute
+ * the signal name from a number or vice versa at the price of a small
+ * dynamic linear lookup.
+ * Duplicates are allowed, but are moved to the end of the list.
+ * The signal number corresponding to sig_name[i] is sig_number[i].
+ * if (i < NSIG) then sig_number[i] == i.
+ * The last element is 0, corresponding to the 0 at the end of
+ * the sig_name list.
*/
-#define HAS_GETNET_PROTOS /**/
+#define SIG_NAME "ZERO","ABRT","FPE","ILL","INT","SEGV","TERM","USR1","USR2","IO","HUP","URG","ALRM","KILL","PIPE","QUIT","CHLD","CONT","STOP","TSTP","TTIN","TTOU","BUS","RT1","RT2","RT3","RT4","RT5","RT6","RT7","RT8",0 /**/
+#define SIG_NUM 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,0 /**/
-/* HAS_GETPROTO_PROTOS:
- * This symbol, if defined, indicates that <netdb.h> includes
- * prototypes for getprotoent(), getprotobyname(), and
- * getprotobyaddr(). Otherwise, it is up to the program to guess
- * them. See netdbtype.U for probing for various Netdb_xxx_t types.
+/* SITEARCH:
+ * This symbol contains the name of the private library for this package.
+ * The library is private in the sense that it needn't be in anyone's
+ * execution path, but it should be accessible by the world. The program
+ * should be prepared to do ~ expansion.
+ * The standard distribution will put nothing in this directory.
+ * After perl has been installed, users may install their own local
+ * architecture-dependent modules in this directory with
+ * MakeMaker Makefile.PL
+ * or equivalent. See INSTALL for details.
*/
-#define HAS_GETPROTO_PROTOS /**/
-
-/* HAS_GETSERV_PROTOS:
- * This symbol, if defined, indicates that <netdb.h> includes
- * prototypes for getservent(), getservbyname(), and
- * getservbyaddr(). Otherwise, it is up to the program to guess
- * them. See netdbtype.U for probing for various Netdb_xxx_t types.
+/* SITEARCH_EXP:
+ * This symbol contains the ~name expanded version of SITEARCH, to be used
+ * in programs that are not prepared to deal with ~ expansion at run-time.
*/
-#define HAS_GETSERV_PROTOS /**/
+#define SITEARCH "" /**/
+#define SITEARCH_EXP "" /**/
-/* Netdb_host_t:
- * This symbol holds the type used for the 1st argument
- * to gethostbyaddr().
- */
-/* Netdb_hlen_t:
- * This symbol holds the type used for the 2nd argument
- * to gethostbyaddr().
- */
-/* Netdb_name_t:
- * This symbol holds the type used for the argument to
- * gethostbyname().
- */
-/* Netdb_net_t:
- * This symbol holds the type used for the 1st argument to
- * getnetbyaddr().
+/* SITELIB:
+ * This symbol contains the name of the private library for this package.
+ * The library is private in the sense that it needn't be in anyone's
+ * execution path, but it should be accessible by the world. The program
+ * should be prepared to do ~ expansion.
+ * The standard distribution will put nothing in this directory.
+ * After perl has been installed, users may install their own local
+ * architecture-independent modules in this directory with
+ * MakeMaker Makefile.PL
+ * or equivalent. See INSTALL for details.
*/
-#define Netdb_host_t char * /**/
-#define Netdb_hlen_t int /**/
-#define Netdb_name_t char * /**/
-#define Netdb_net_t long /**/
-
-/* Select_fd_set_t:
- * This symbol holds the type used for the 2nd, 3rd, and 4th
- * arguments to select. Usually, this is 'fd_set *', if HAS_FD_SET
- * is defined, and 'int *' otherwise. This is only useful if you
- * have select(), of course.
+/* SITELIB_EXP:
+ * This symbol contains the ~name expanded version of SITELIB, to be used
+ * in programs that are not prepared to deal with ~ expansion at run-time.
*/
-#define Select_fd_set_t fd_set * /**/
+#define SITELIB "/system/ported/perl/lib/site/5.005" /**/
+#define SITELIB_EXP "/system/ported/perl/lib/site/5.005" /**/
-/* ARCHNAME:
- * This symbol holds a string representing the architecture name.
- * It may be used to construct an architecture-dependant pathname
- * where library files may be held under a private library, for
- * instance.
+/* Size_t:
+ * This symbol holds the type used to declare length parameters
+ * for string functions. It is usually size_t, but may be
+ * unsigned long, int, etc. It may be necessary to include
+ * <sys/types.h> to get any typedef'ed information.
*/
-#define ARCHNAME "vos" /**/
+#define Size_t size_t /* length paramater for string functions */
-/* OLD_PTHREAD_CREATE_JOINABLE:
- * This symbol, if defined, indicates how to create pthread
- * in joinable (aka undetached) state. NOTE: not defined
- * if pthread.h already has defined PTHREAD_CREATE_JOINABLE
- * (the new version of the constant).
- * If defined, known values are PTHREAD_CREATE_UNDETACHED
- * and __UNDETACHED.
+/* SSize_t:
+ * This symbol holds the type used by functions that return
+ * a count of bytes or an error condition. It must be a signed type.
+ * It is usually ssize_t, but may be long or int, etc.
+ * It may be necessary to include <sys/types.h> or <unistd.h>
+ * to get any typedef'ed information.
+ * We will pick a type such that sizeof(SSize_t) == sizeof(Size_t).
*/
-/*#define OLD_PTHREAD_CREATE_JOINABLE /**/
+#define SSize_t ssize_t /* signed count of bytes */
-/* HAS_PTHREAD_YIELD:
- * This symbol, if defined, indicates that the pthread_yield
- * routine is available to yield the execution of the current
- * thread. sched_yield is preferable to pthread_yield.
+/* STARTPERL:
+ * This variable contains the string to put in front of a perl
+ * script to make sure (one hopes) that it runs with perl and not
+ * some shell.
*/
-/* SCHED_YIELD:
- * This symbol defines the way to yield the execution of
- * the current thread. Known ways are sched_yield,
- * pthread_yield, and pthread_yield with NULL.
+#define STARTPERL "!perl.pm" /**/
+
+/* HAS_STDIO_STREAM_ARRAY:
+ * This symbol, if defined, tells that there is an array
+ * holding the stdio streams.
*/
-/* HAS_SCHED_YIELD:
- * This symbol, if defined, indicates that the sched_yield
- * routine is available to yield the execution of the current
- * thread. sched_yield is preferable to pthread_yield.
+/* STDIO_STREAM_ARRAY:
+ * This symbol tells the name of the array holding the stdio streams.
+ * Usual values include _iob, __iob, and __sF.
*/
-/*#define HAS_PTHREAD_YIELD /**/
-#define SCHED_YIELD /**/
-/*#define HAS_SCHED_YIELD /**/
+#define HAS_STDIO_STREAM_ARRAY /**/
+#define STDIO_STREAM_ARRAY _iob
-/* I_MACH_CTHREADS:
- * This symbol, if defined, indicates to the C program that it should
- * include <mach/cthreads.h>.
+/* Uid_t_f:
+ * This symbol defines the format string used for printing a Uid_t.
*/
-/*#define I_MACH_CTHREADS /**/
+#define Uid_t_f "d" /**/
-/* I_PTHREAD:
- * This symbol, if defined, indicates to the C program that it should
- * include <pthread.h>.
+/* Uid_t_size:
+ * This symbol holds the size of a Uid_t in bytes.
*/
-/*#define I_PTHREAD /**/
+#define Uid_t_size 4 /* UID size */
-/* USE_THREADS:
- * This symbol, if defined, indicates that Perl should
- * be built to use threads.
+/* Uid_t:
+ * This symbol holds the type used to declare user ids in the kernel.
+ * It can be int, ushort, uid_t, etc... It may be necessary to include
+ * <sys/types.h> to get any typedef'ed information.
*/
-/* OLD_PTHREADS_API:
- * This symbol, if defined, indicates that Perl should
- * be built to use the old draft POSIX threads API.
+#define Uid_t uid_t /* UID type */
+
+/* USE_64_BIT_INT:
+ * This symbol, if defined, indicates that 64-bit integers should
+ * be used when available. If not defined, the native integers
+ * will be employed (be they 32 or 64 bits). The minimal possible
+ * 64-bitness is used, just enough to get 64-bit integers into Perl.
+ * This may mean using for example "long longs", while your memory
+ * may still be limited to 2 gigabytes.
*/
-#ifndef USE_TTHREADS
-/*#define USE_THREADS /**/
+/* USE_64_BIT_ALL:
+ * This symbol, if defined, indicates that 64-bit integers should
+ * be used when available. If not defined, the native integers
+ * will be used (be they 32 or 64 bits). The maximal possible
+ * 64-bitness is employed: LP64 or ILP64, meaning that you will
+ * be able to use more than 2 gigabytes of memory. This mode is
+ * even more binary incompatible than USE_64_BIT_INT. You may not
+ * be able to run the resulting executable in a 32-bit CPU at all or
+ * you may need at least to reboot your OS to 64-bit mode.
+ */
+#ifndef USE_64_BIT_INT
+/*#define USE_64_BIT_INT /**/
#endif
-/*#define OLD_PTHREADS_API /**/
-/* Time_t:
- * This symbol holds the type returned by time(). It can be long,
- * or time_t on BSD sites (in which case <sys/types.h> should be
- * included).
+#ifndef USE_64_BIT_ALL
+/*#define USE_64_BIT_ALL /**/
+#endif
+
+/* USE_LARGE_FILES:
+ * This symbol, if defined, indicates that large file support
+ * should be used when available.
*/
-#define Time_t time_t /* Time type */
+#ifndef USE_LARGE_FILES
+/*#define USE_LARGE_FILES /**/
+#endif
-/* HAS_TIMES:
- * This symbol, if defined, indicates that the times() routine exists.
- * Note that this became obsolete on some systems (SUNOS), which now
- * use getrusage(). It may be necessary to include <sys/times.h>.
+/* USE_LONG_DOUBLE:
+ * This symbol, if defined, indicates that long doubles should
+ * be used when available.
*/
-#define HAS_TIMES /**/
+#ifndef USE_LONG_DOUBLE
+#define USE_LONG_DOUBLE /**/
+#endif
-/* Fpos_t:
- * This symbol holds the type used to declare file positions in libc.
- * It can be fpos_t, long, uint, etc... It may be necessary to include
- * <sys/types.h> to get any typedef'ed information.
+/* USE_MORE_BITS:
+ * This symbol, if defined, indicates that 64-bit interfaces and
+ * long doubles should be used when available.
*/
-#define Fpos_t fpos_t /* File position type */
+#ifndef USE_MORE_BITS
+/*#define USE_MORE_BITS /**/
+#endif
-/* Gid_t_f:
- * This symbol defines the format string used for printing a Gid_t.
+/* MULTIPLICITY:
+ * This symbol, if defined, indicates that Perl should
+ * be built to use multiplicity.
*/
-#define Gid_t_f "d" /**/
+#ifndef MULTIPLICITY
+/*#define MULTIPLICITY /**/
+#endif
-/* Gid_t_size:
- * This symbol holds the size of a Gid_t in bytes.
+/* USE_PERLIO:
+ * This symbol, if defined, indicates that the PerlIO abstraction should
+ * be used throughout. If not defined, stdio should be
+ * used in a fully backward compatible manner.
*/
-#define Gid_t_size 4 /* GID size */
+#ifndef USE_PERLIO
+/*#define USE_PERLIO /**/
+#endif
-/* Gid_t:
- * This symbol holds the return type of getgid() and the type of
- * argument to setrgid() and related functions. Typically,
- * it is the type of group ids in the kernel. It can be int, ushort,
- * uid_t, etc... It may be necessary to include <sys/types.h> to get
- * any typedef'ed information.
+/* USE_SOCKS:
+ * This symbol, if defined, indicates that Perl should
+ * be built to use socks.
*/
-#define Gid_t gid_t /* Type for getgid(), etc... */
+#ifndef USE_SOCKS
+/*#define USE_SOCKS /**/
+#endif
-/* Off_t:
- * This symbol holds the type used to declare offsets in the kernel.
- * It can be int, long, off_t, etc... It may be necessary to include
- * <sys/types.h> to get any typedef'ed information.
+/* USE_ITHREADS:
+ * This symbol, if defined, indicates that Perl should be built to
+ * use the interpreter-based threading implementation.
*/
-/* LSEEKSIZE:
- * This symbol holds the number of bytes used by the Off_t.
+/* USE_5005THREADS:
+ * This symbol, if defined, indicates that Perl should be built to
+ * use the 5.005-based threading implementation.
*/
-/* Off_t_size:
- * This symbol holds the number of bytes used by the Off_t.
+/* OLD_PTHREADS_API:
+ * This symbol, if defined, indicates that Perl should
+ * be built to use the old draft POSIX threads API.
*/
-#define Off_t off_t /* <offset> type */
-#define LSEEKSIZE 4 /* <offset> size */
-#define Off_t_size 4 /* <offset> size */
+/*#define USE_5005THREADS /**/
+# USE_ITHREADS /**/
+#if defined(USE_5005THREADS) && !defined(USE_ITHREADS)
+#define USE_THREADS /* until src is revised*/
+#endif
+/*#define OLD_PTHREADS_API /**/
-/* Mode_t:
- * This symbol holds the type used to declare file modes
- * for systems calls. It is usually mode_t, but may be
- * int or unsigned short. It may be necessary to include <sys/types.h>
- * to get any typedef'ed information.
+/* PERL_VENDORLIB_EXP:
+ * This symbol contains the ~name expanded version of VENDORLIB, to be used
+ * in programs that are not prepared to deal with ~ expansion at run-time.
*/
-#define Mode_t mode_t /* file mode parameter for system calls */
+#define PERL_VENDORLIB_EXP "" /**/
-/* Pid_t:
- * This symbol holds the type used to declare process ids in the kernel.
- * It can be int, uint, pid_t, etc... It may be necessary to include
- * <sys/types.h> to get any typedef'ed information.
+/* VOIDFLAGS:
+ * This symbol indicates how much support of the void type is given by this
+ * compiler. What various bits mean:
+ *
+ * 1 = supports declaration of void
+ * 2 = supports arrays of pointers to functions returning void
+ * 4 = supports comparisons between pointers to void functions and
+ * addresses of void functions
+ * 8 = suports declaration of generic void pointers
+ *
+ * The package designer should define VOIDUSED to indicate the requirements
+ * of the package. This can be done either by #defining VOIDUSED before
+ * including config.h, or by defining defvoidused in Myinit.U. If the
+ * latter approach is taken, only those flags will be tested. If the
+ * level of void support necessary is not present, defines void to int.
*/
-#define Pid_t pid_t /* PID type */
+#ifndef VOIDUSED
+#define VOIDUSED 15
+#endif
+#define VOIDFLAGS 15
+#if (VOIDFLAGS & VOIDUSED) != VOIDUSED
+#define void int /* is void to be avoided? */
+#define M_VOID /* Xenix strikes again */
+#endif
-/* Size_t:
- * This symbol holds the type used to declare length parameters
- * for string functions. It is usually size_t, but may be
- * unsigned long, int, etc. It may be necessary to include
- * <sys/types.h> to get any typedef'ed information.
+/* PERL_XS_APIVERSION:
+ * This variable contains the version of the oldest perl binary
+ * compatible with the present perl. perl.c:incpush() and
+ * lib/lib.pm will automatically search in for older
+ * directories across major versions back to xs_apiversion.
+ * This is only useful if you have a perl library directory tree
+ * structured like the default one.
+ * See INSTALL for how this works.
+ * The versioned site_perl directory was introduced in 5.005,
+ * so that is the lowest possible value.
+ * Since this can depend on compile time options (such as
+ * bincompat) it is set by Configure. Other non-default sources
+ * of potential incompatibility, such as multiplicity, threads,
+ * debugging, 64bits, sfio, etc., are not checked for currently,
+ * though in principle we could go snooping around in old
+ * Config.pm files.
*/
-#define Size_t size_t /* length paramater for string functions */
+/* PERL_PM_APIVERSION:
+ * This variable contains the version of the oldest perl
+ * compatible with the present perl. (That is, pure perl modules
+ * written for pm_apiversion will still work for the current
+ * version). perl.c:incpush() and lib/lib.pm will automatically
+ * search in /system/ported/perl/lib/site/5.005 for older directories across major versions
+ * back to pm_apiversion. This is only useful if you have a perl
+ * library directory tree structured like the default one. The
+ * versioned site_perl library was introduced in 5.005, so that's
+ * the default setting for this variable. It's hard to imagine
+ * it changing before Perl6. It is included here for symmetry
+ * with xs_apiveprsion -- the searching algorithms will
+ * (presumably) be similar.
+ * See the INSTALL file for how this works.
+ */
+#define PERL_XS_APIVERSION "5.00563"
+#define PERL_PM_APIVERSION "5.00563"
-/* Uid_t_f:
- * This symbol defines the format string used for printing a Uid_t.
+/* HAS_GETFSSTAT:
+ * This symbol, if defined, indicates that the getfsstat routine is
+ * available to stat filesystems in bulk.
*/
-#define Uid_t_f "d" /**/
+/*#define HAS_GETFSSTAT /**/
-/* Uid_t_size:
- * This symbol holds the size of a Uid_t in bytes.
+/* HAS_LSEEK_PROTO:
+ * This symbol, if defined, indicates that the system provides
+ * a prototype for the lseek() function. Otherwise, it is up
+ * to the program to supply one. A good guess is
+ * extern off_t lseek(int, off_t, int);
*/
-#define Uid_t_size 4 /* UID size */
+#define HAS_LSEEK_PROTO /**/
-/* Uid_t:
- * This symbol holds the type used to declare user ids in the kernel.
- * It can be int, ushort, uid_t, etc... It may be necessary to include
- * <sys/types.h> to get any typedef'ed information.
+/* Sock_size_t:
+ * This symbol holds the type used for the size argument of
+ * various socket calls (just the base type, not the pointer-to).
*/
-#define Uid_t uid_t /* UID type */
+#define Sock_size_t int /**/
#endif
*/
#$d_mktime HAS_MKTIME /**/
+/* HAS_MSYNC:
+ * This symbol, if defined, indicates that the msync system call is
+ * available to synchronize a mapped file.
+ */
+#$d_msync HAS_MSYNC /**/
+
+/* HAS_MUNMAP:
+ * This symbol, if defined, indicates that the munmap system call is
+ * available to unmap a region, usually mapped by mmap().
+ */
+#$d_munmap HAS_MUNMAP /**/
+
/* HAS_NICE:
* This symbol, if defined, indicates that the nice routine is
* available.
*/
#define STDCHAR $stdchar /**/
+/* CROSSCOMPILE:
+ * This symbol, if defined, signifies that we our
+ * build process is a cross-compilation.
+ */
+#$crosscompile CROSSCOMPILE /**/
+
+/* INTSIZE:
+ * This symbol contains the value of sizeof(int) so that the C
+ * preprocessor can make decisions based on it.
+ */
+/* LONGSIZE:
+ * This symbol contains the value of sizeof(long) so that the C
+ * preprocessor can make decisions based on it.
+ */
+/* SHORTSIZE:
+ * This symbol contains the value of sizeof(short) so that the C
+ * preprocessor can make decisions based on it.
+ */
+#define INTSIZE $intsize /**/
+#define LONGSIZE $longsize /**/
+#define SHORTSIZE $shortsize /**/
+
+/* MULTIARCH:
+ * This symbol, if defined, signifies that the build
+ * process will produce some binary files that are going to be
+ * used in a cross-platform environment. This is the case for
+ * example with the NeXT "fat" binaries that contain executables
+ * for several CPUs.
+ */
+#$multiarch MULTIARCH /**/
+
/* HAS_QUAD:
* This symbol, if defined, tells that there's a 64-bit integer type,
* Quad_t, and its unsigned counterpar, Uquad_t. QUADKIND will be one
*/
#$i_syssecrt I_SYS_SECURITY /**/
-/* CROSSCOMPILE:
- * This symbol, if defined, signifies that we our
- * build process is a cross-compilation.
- */
-#$crosscompile CROSSCOMPILE /**/
-
-/* INTSIZE:
- * This symbol contains the value of sizeof(int) so that the C
- * preprocessor can make decisions based on it.
- */
-/* LONGSIZE:
- * This symbol contains the value of sizeof(long) so that the C
- * preprocessor can make decisions based on it.
- */
-/* SHORTSIZE:
- * This symbol contains the value of sizeof(short) so that the C
- * preprocessor can make decisions based on it.
- */
-#define INTSIZE $intsize /**/
-#define LONGSIZE $longsize /**/
-#define SHORTSIZE $shortsize /**/
-
-/* MULTIARCH:
- * This symbol, if defined, signifies that the build
- * process will produce some binary files that are going to be
- * used in a cross-platform environment. This is the case for
- * example with the NeXT "fat" binaries that contain executables
- * for several CPUs.
+/* OSNAME:
+ * This symbol contains the name of the operating system, as determined
+ * by Configure. You shouldn't rely on it too much; the specific
+ * feature tests from Configure are generally more reliable.
*/
-#$multiarch MULTIARCH /**/
+#define OSNAME "$osname" /**/
/* MEM_ALIGNBYTES:
* This symbol contains the number of bytes required to align a
- * double. Usual values are 2, 4 and 8. The default is eight,
- * for safety.
+ * double, or a long double when applicable. Usual values are 2,
+ * 4 and 8. The default is eight, for safety.
*/
#if defined(CROSSCOMPILE) || defined(MULTIARCH)
# define MEM_ALIGNBYTES 8
#define MEM_ALIGNBYTES $alignbytes
#endif
+/* ARCHLIB:
+ * This variable, if defined, holds the name of the directory in
+ * which the user wants to put architecture-dependent public
+ * library files for $package. It is most often a local directory
+ * such as /usr/local/lib. Programs using this variable must be
+ * prepared to deal with filename expansion. If ARCHLIB is the
+ * same as PRIVLIB, it is not defined, since presumably the
+ * program already searches PRIVLIB.
+ */
+/* ARCHLIB_EXP:
+ * This symbol contains the ~name expanded version of ARCHLIB, to be used
+ * in programs that are not prepared to deal with ~ expansion at run-time.
+ */
+#$d_archlib ARCHLIB "$archlib" /**/
+#$d_archlib ARCHLIB_EXP "$archlibexp" /**/
+
+/* ARCHNAME:
+ * This symbol holds a string representing the architecture name.
+ * It may be used to construct an architecture-dependant pathname
+ * where library files may be held under a private library, for
+ * instance.
+ */
+#define ARCHNAME "$archname" /**/
+
+/* HAS_ATOLF:
+ * This symbol, if defined, indicates that the atolf routine is
+ * available to convert strings into long doubles.
+ */
+#$d_atolf HAS_ATOLF /**/
+
+/* HAS_ATOLL:
+ * This symbol, if defined, indicates that the atoll routine is
+ * available to convert strings into long longs.
+ */
+#$d_atoll HAS_ATOLL /**/
+
+/* BIN:
+ * This symbol holds the path of the bin directory where the package will
+ * be installed. Program must be prepared to deal with ~name substitution.
+ */
+/* BIN_EXP:
+ * This symbol is the filename expanded version of the BIN symbol, for
+ * programs that do not want to deal with that at run-time.
+ */
+#define BIN "$bin" /**/
+#define BIN_EXP "$binexp" /**/
+
+/* PERL_BINCOMPAT_5005:
+ * This symbol, if defined, indicates that Perl 5.006 should be
+ * binary-compatible with Perl 5.005. This is impossible for builds
+ * that use features like threads and multiplicity it is always $undef
+ * for those versions.
+ */
+#$d_bincompat5005 PERL_BINCOMPAT_5005 /**/
+
/* BYTEORDER:
* This symbol holds the hexadecimal constant defined in byteorder,
* i.e. 0x1234 or 0x4321, etc...
#define BYTEORDER 0x$byteorder /* large digits for MSB */
#endif /* NeXT */
+/* CAT2:
+ * This macro catenates 2 tokens together.
+ */
+/* STRINGIFY:
+ * This macro surrounds its token with double quotes.
+ */
+#if $cpp_stuff == 1
+#define CAT2(a,b)a/**/b
+#define STRINGIFY(a)"a"
+ /* If you can get stringification with catify, tell me how! */
+#endif
+#if $cpp_stuff == 42
+#define CAT2(a,b)a ## b
+#define StGiFy(a)# a
+#define STRINGIFY(a)StGiFy(a)
+#endif
+#if $cpp_stuff != 1 && $cpp_stuff != 42
+#include "Bletch: How does this C preprocessor catenate tokens?"
+#endif
+
+/* CPPSTDIN:
+ * This symbol contains the first part of the string which will invoke
+ * the C preprocessor on the standard input and produce to standard
+ * output. Typical value of "cc -E" or "/lib/cpp", but it can also
+ * call a wrapper. See CPPRUN.
+ */
+/* CPPMINUS:
+ * This symbol contains the second part of the string which will invoke
+ * the C preprocessor on the standard input and produce to standard
+ * output. This symbol will have the value "-" if CPPSTDIN needs a minus
+ * to specify standard input, otherwise the value is "".
+ */
+/* CPPRUN:
+ * This symbol contains the string which will invoke a C preprocessor on
+ * the standard input and produce to standard output. It needs to end
+ * with CPPLAST, after all other preprocessor flags have been specified.
+ * The main difference with CPPSTDIN is that this program will never be a
+ * pointer to a shell wrapper, i.e. it will be empty if no preprocessor is
+ * available directly to the user. Note that it may well be different from
+ * the preprocessor used to compile the C program.
+ */
+/* CPPLAST:
+ * This symbol is intended to be used along with CPPRUN in the same manner
+ * symbol CPPMINUS is used with CPPSTDIN. It contains either "-" or "".
+ */
+#define CPPSTDIN "$cppstdin"
+#define CPPMINUS "$cppminus"
+#define CPPRUN "$cpprun"
+#define CPPLAST "$cpplast"
+
+/* HAS_ACCESS:
+ * This manifest constant lets the C program know that the access()
+ * system call is available to check for accessibility using real UID/GID.
+ * (always present on UNIX.)
+ */
+#$d_access HAS_ACCESS /**/
+
/* CASTI32:
* This symbol is defined if the C compiler can cast negative
* or large floating point numbers to 32-bit ints.
*/
#$d_void_closedir VOID_CLOSEDIR /**/
-/* HAS_FD_SET:
- * This symbol, when defined, indicates presence of the fd_set typedef
- * in <sys/types.h>
+/* HAS_CSH:
+ * This symbol, if defined, indicates that the C-shell exists.
*/
-#$d_fd_set HAS_FD_SET /**/
-
-/* Gconvert:
- * This preprocessor macro is defined to convert a floating point
- * number to a string without a trailing decimal point. This
- * emulates the behavior of sprintf("%g"), but is sometimes much more
- * efficient. If gconvert() is not available, but gcvt() drops the
- * trailing decimal point, then gcvt() is used. If all else fails,
- * a macro using sprintf("%g") is used. Arguments for the Gconvert
- * macro are: value, number of digits, whether trailing zeros should
- * be retained, and the output buffer.
- * Possible values are:
- * d_Gconvert='gconvert((x),(n),(t),(b))'
- * d_Gconvert='gcvt((x),(n),(b))'
- * d_Gconvert='sprintf((b),"%.*g",(n),(x))'
- * The last two assume trailing zeros should not be kept.
+/* CSH:
+ * This symbol, if defined, contains the full pathname of csh.
*/
-#define Gconvert(x,n,t,b) $d_Gconvert
+#$d_csh HAS_CSH /**/
+#ifdef HAS_CSH
+#define CSH "$full_csh" /**/
+#endif
-/* HAS_GNULIBC:
- * This symbol, if defined, indicates to the C program that
- * the GNU C library is being used.
- */
-#$d_gnulibc HAS_GNULIBC /**/
-/* HAS_ISASCII:
- * This manifest constant lets the C program know that isascii
- * is available.
+/* DLSYM_NEEDS_UNDERSCORE:
+ * This symbol, if defined, indicates that we need to prepend an
+ * underscore to the symbol name before calling dlsym(). This only
+ * makes sense if you *have* dlsym, which we will presume is the
+ * case if you're using dl_dlopen.xs.
*/
-#$d_isascii HAS_ISASCII /**/
+#$d_dlsymun DLSYM_NEEDS_UNDERSCORE /**/
-/* HAS_LCHOWN:
- * This symbol, if defined, indicates that the lchown routine is
- * available to operate on a symbolic link (instead of following the
- * link).
+/* HAS_DRAND48_PROTO:
+ * This symbol, if defined, indicates that the system provides
+ * a prototype for the drand48() function. Otherwise, it is up
+ * to the program to supply one. A good guess is
+ * extern double drand48 _((void));
*/
-#$d_lchown HAS_LCHOWN /**/
+#$d_drand48proto HAS_DRAND48_PROTO /**/
-/* HAS_OPEN3:
- * This manifest constant lets the C program know that the three
- * argument form of open(2) is available.
+/* HAS_ENDGRENT:
+ * This symbol, if defined, indicates that the getgrent routine is
+ * available for finalizing sequential access of the group database.
*/
-#$d_open3 HAS_OPEN3 /**/
+#$d_endgrent HAS_ENDGRENT /**/
-/* HAS_SAFE_BCOPY:
- * This symbol, if defined, indicates that the bcopy routine is available
- * to copy potentially overlapping memory blocks. Otherwise you should
- * probably use memmove() or memcpy(). If neither is defined, roll your
- * own version.
+/* HAS_ENDHOSTENT:
+ * This symbol, if defined, indicates that the endhostent() routine is
+ * available to close whatever was being used for host queries.
*/
-#$d_safebcpy HAS_SAFE_BCOPY /**/
+#$d_endhent HAS_ENDHOSTENT /**/
-/* HAS_SAFE_MEMCPY:
- * This symbol, if defined, indicates that the memcpy routine is available
- * to copy potentially overlapping memory blocks. Otherwise you should
- * probably use memmove() or memcpy(). If neither is defined, roll your
- * own version.
+/* HAS_ENDNETENT:
+ * This symbol, if defined, indicates that the endnetent() routine is
+ * available to close whatever was being used for network queries.
*/
-#$d_safemcpy HAS_SAFE_MEMCPY /**/
+#$d_endnent HAS_ENDNETENT /**/
-/* HAS_SANE_MEMCMP:
- * This symbol, if defined, indicates that the memcmp routine is available
- * and can be used to compare relative magnitudes of chars with their high
- * bits set. If it is not defined, roll your own version.
+/* HAS_ENDPROTOENT:
+ * This symbol, if defined, indicates that the endprotoent() routine is
+ * available to close whatever was being used for protocol queries.
*/
-#$d_sanemcmp HAS_SANE_MEMCMP /**/
+#$d_endpent HAS_ENDPROTOENT /**/
-/* HAS_SIGACTION:
- * This symbol, if defined, indicates that Vr4's sigaction() routine
- * is available.
+/* HAS_ENDPWENT:
+ * This symbol, if defined, indicates that the getgrent routine is
+ * available for finalizing sequential access of the passwd database.
*/
-#$d_sigaction HAS_SIGACTION /**/
+#$d_endpwent HAS_ENDPWENT /**/
-/* HAS_SIGSETJMP:
- * This variable indicates to the C program that the sigsetjmp()
- * routine is available to save the calling process's registers
- * and stack environment for later use by siglongjmp(), and
- * to optionally save the process's signal mask. See
- * Sigjmp_buf, Sigsetjmp, and Siglongjmp.
- */
-/* Sigjmp_buf:
- * This is the buffer type to be used with Sigsetjmp and Siglongjmp.
- */
-/* Sigsetjmp:
- * This macro is used in the same way as sigsetjmp(), but will invoke
- * traditional setjmp() if sigsetjmp isn't available.
- * See HAS_SIGSETJMP.
- */
-/* Siglongjmp:
- * This macro is used in the same way as siglongjmp(), but will invoke
- * traditional longjmp() if siglongjmp isn't available.
- * See HAS_SIGSETJMP.
+/* HAS_ENDSERVENT:
+ * This symbol, if defined, indicates that the endservent() routine is
+ * available to close whatever was being used for service queries.
*/
-#$d_sigsetjmp HAS_SIGSETJMP /**/
-#ifdef HAS_SIGSETJMP
-#define Sigjmp_buf sigjmp_buf
-#define Sigsetjmp(buf,save_mask) sigsetjmp((buf),(save_mask))
-#define Siglongjmp(buf,retval) siglongjmp((buf),(retval))
-#else
-#define Sigjmp_buf jmp_buf
-#define Sigsetjmp(buf,save_mask) setjmp((buf))
-#define Siglongjmp(buf,retval) longjmp((buf),(retval))
-#endif
+#$d_endsent HAS_ENDSERVENT /**/
-/* USE_STDIO_PTR:
- * This symbol is defined if the _ptr and _cnt fields (or similar)
- * of the stdio FILE structure can be used to access the stdio buffer
- * for a file handle. If this is defined, then the FILE_ptr(fp)
- * and FILE_cnt(fp) macros will also be defined and should be used
- * to access these fields.
- */
-/* FILE_ptr:
- * This macro is used to access the _ptr field (or equivalent) of the
- * FILE structure pointed to by its argument. This macro will always be
- * defined if USE_STDIO_PTR is defined.
+/* HAS_ENDSPENT:
+ * This symbol, if defined, indicates that the endspent system call is
+ * available to finalize the scan of SysV shadow password entries.
*/
-/* STDIO_PTR_LVALUE:
- * This symbol is defined if the FILE_ptr macro can be used as an
- * lvalue.
+#$d_endspent HAS_ENDSPENT /**/
+
+/* HAS_FD_SET:
+ * This symbol, when defined, indicates presence of the fd_set typedef
+ * in <sys/types.h>
*/
-/* FILE_cnt:
- * This macro is used to access the _cnt field (or equivalent) of the
- * FILE structure pointed to by its argument. This macro will always be
- * defined if USE_STDIO_PTR is defined.
+#$d_fd_set HAS_FD_SET /**/
+
+/* HAS_FPOS64_T:
+ * This symbol will be defined if the C compiler supports fpos64_t.
*/
-/* STDIO_CNT_LVALUE:
- * This symbol is defined if the FILE_cnt macro can be used as an
- * lvalue.
+#$d_fpos64_t HAS_FPOS64_T /**/
+
+/* HAS_STRUCT_FS_DATA:
+ * This symbol, if defined, indicates that the struct fs_data
+ * to do statfs() is supported.
*/
-#$d_stdstdio USE_STDIO_PTR /**/
-#ifdef USE_STDIO_PTR
-#define FILE_ptr(fp) $stdio_ptr
-#$d_stdio_ptr_lval STDIO_PTR_LVALUE /**/
-#define FILE_cnt(fp) $stdio_cnt
-#$d_stdio_cnt_lval STDIO_CNT_LVALUE /**/
-#endif
+#$d_fs_data_s HAS_STRUCT_FS_DATA /**/
-/* USE_STDIO_BASE:
- * This symbol is defined if the _base field (or similar) of the
- * stdio FILE structure can be used to access the stdio buffer for
- * a file handle. If this is defined, then the FILE_base(fp) macro
- * will also be defined and should be used to access this field.
- * Also, the FILE_bufsiz(fp) macro will be defined and should be used
- * to determine the number of bytes in the buffer. USE_STDIO_BASE
- * will never be defined unless USE_STDIO_PTR is.
+/* HAS_FSEEKO:
+ * This symbol, if defined, indicates that the fseeko routine is
+ * available to fseek beyond 32 bits (useful for ILP32 hosts).
*/
-/* FILE_base:
- * This macro is used to access the _base field (or equivalent) of the
- * FILE structure pointed to by its argument. This macro will always be
- * defined if USE_STDIO_BASE is defined.
+#$d_fseeko HAS_FSEEKO /**/
+
+/* HAS_FSTATFS:
+ * This symbol, if defined, indicates that the fstatfs routine is
+ * available to stat filesystems by file descriptors.
*/
-/* FILE_bufsiz:
- * This macro is used to determine the number of bytes in the I/O
- * buffer pointed to by _base field (or equivalent) of the FILE
- * structure pointed to its argument. This macro will always be defined
- * if USE_STDIO_BASE is defined.
+#$d_fstatfs HAS_FSTATFS /**/
+
+/* HAS_FTELLO:
+ * This symbol, if defined, indicates that the ftello routine is
+ * available to ftell beyond 32 bits (useful for ILP32 hosts).
*/
-#$d_stdiobase USE_STDIO_BASE /**/
-#ifdef USE_STDIO_BASE
-#define FILE_base(fp) $stdio_base
-#define FILE_bufsiz(fp) $stdio_bufsiz
-#endif
+#$d_ftello HAS_FTELLO /**/
-/* HAS_VPRINTF:
- * This symbol, if defined, indicates that the vprintf routine is available
- * to printf with a pointer to an argument list. If unavailable, you
- * may need to write your own, probably in terms of _doprnt().
+/* Gconvert:
+ * This preprocessor macro is defined to convert a floating point
+ * number to a string without a trailing decimal point. This
+ * emulates the behavior of sprintf("%g"), but is sometimes much more
+ * efficient. If gconvert() is not available, but gcvt() drops the
+ * trailing decimal point, then gcvt() is used. If all else fails,
+ * a macro using sprintf("%g") is used. Arguments for the Gconvert
+ * macro are: value, number of digits, whether trailing zeros should
+ * be retained, and the output buffer.
+ * Possible values are:
+ * d_Gconvert='gconvert((x),(n),(t),(b))'
+ * d_Gconvert='gcvt((x),(n),(b))'
+ * d_Gconvert='sprintf((b),"%.*g",(n),(x))'
+ * The last two assume trailing zeros should not be kept.
*/
-/* USE_CHAR_VSPRINTF:
- * This symbol is defined if this system has vsprintf() returning type
- * (char*). The trend seems to be to declare it as "int vsprintf()". It
- * is up to the package author to declare vsprintf correctly based on the
- * symbol.
+#define Gconvert(x,n,t,b) $d_Gconvert
+
+/* HAS_GETCWD:
+ * This symbol, if defined, indicates that the getcwd routine is
+ * available to get the current working directory.
*/
-#$d_vprintf HAS_VPRINTF /**/
-#$d_charvspr USE_CHAR_VSPRINTF /**/
+#$d_getcwd HAS_GETCWD /**/
-/* DOUBLESIZE:
- * This symbol contains the size of a double, so that the C preprocessor
- * can make decisions based on it.
+/* HAS_GETGRENT:
+ * This symbol, if defined, indicates that the getgrent routine is
+ * available for sequential access of the group database.
*/
-#define DOUBLESIZE $doublesize /**/
+#$d_getgrent HAS_GETGRENT /**/
-/* I_TIME:
- * This symbol, if defined, indicates to the C program that it should
- * include <time.h>.
+/* HAS_GETHOSTBYADDR:
+ * This symbol, if defined, indicates that the gethostbyaddr() routine is
+ * available to look up hosts by their IP addresses.
*/
-/* I_SYS_TIME:
- * This symbol, if defined, indicates to the C program that it should
- * include <sys/time.h>.
+#$d_gethbyaddr HAS_GETHOSTBYADDR /**/
+
+/* HAS_GETHOSTBYNAME:
+ * This symbol, if defined, indicates that the gethostbyname() routine is
+ * available to look up host names in some data base or other.
*/
-/* I_SYS_TIME_KERNEL:
- * This symbol, if defined, indicates to the C program that it should
- * include <sys/time.h> with KERNEL defined.
+#$d_gethbyname HAS_GETHOSTBYNAME /**/
+
+/* HAS_GETHOSTENT:
+ * This symbol, if defined, indicates that the gethostent() routine is
+ * available to look up host names in some data base or another.
*/
-#$i_time I_TIME /**/
-#$i_systime I_SYS_TIME /**/
-#$i_systimek I_SYS_TIME_KERNEL /**/
+#$d_gethent HAS_GETHOSTENT /**/
-/* VAL_O_NONBLOCK:
- * This symbol is to be used during open() or fcntl(F_SETFL) to turn on
- * non-blocking I/O for the file descriptor. Note that there is no way
- * back, i.e. you cannot turn it blocking again this way. If you wish to
- * alternatively switch between blocking and non-blocking, use the
- * ioctl(FIOSNBIO) call instead, but that is not supported by all devices.
+/* HAS_GETHOSTNAME:
+ * This symbol, if defined, indicates that the C program may use the
+ * gethostname() routine to derive the host name. See also HAS_UNAME
+ * and PHOSTNAME.
*/
-/* VAL_EAGAIN:
- * This symbol holds the errno error code set by read() when no data was
- * present on the non-blocking file descriptor.
+/* HAS_UNAME:
+ * This symbol, if defined, indicates that the C program may use the
+ * uname() routine to derive the host name. See also HAS_GETHOSTNAME
+ * and PHOSTNAME.
*/
-/* RD_NODATA:
- * This symbol holds the return code from read() when no data is present
- * on the non-blocking file descriptor. Be careful! If EOF_NONBLOCK is
- * not defined, then you can't distinguish between no data and EOF by
- * issuing a read(). You'll have to find another way to tell for sure!
+/* PHOSTNAME:
+ * This symbol, if defined, indicates the command to feed to the
+ * popen() routine to derive the host name. See also HAS_GETHOSTNAME
+ * and HAS_UNAME. Note that the command uses a fully qualified path,
+ * so that it is safe even if used by a process with super-user
+ * privileges.
*/
-/* EOF_NONBLOCK:
- * This symbol, if defined, indicates to the C program that a read() on
- * a non-blocking file descriptor will return 0 on EOF, and not the value
- * held in RD_NODATA (-1 usually, in that case!).
+/* HAS_PHOSTNAME:
+ * This symbol, if defined, indicates that the C program may use the
+ * contents of PHOSTNAME as a command to feed to the popen() routine
+ * to derive the host name.
*/
-#define VAL_O_NONBLOCK $o_nonblock
-#define VAL_EAGAIN $eagain
-#define RD_NODATA $rd_nodata
-#$d_eofnblk EOF_NONBLOCK
+#$d_gethname HAS_GETHOSTNAME /**/
+#$d_uname HAS_UNAME /**/
+#$d_phostname HAS_PHOSTNAME /**/
+#ifdef HAS_PHOSTNAME
+#define PHOSTNAME "$aphostname" /* How to get the host name */
+#endif
-/* PTRSIZE:
- * This symbol contains the size of a pointer, so that the C preprocessor
- * can make decisions based on it. It will be sizeof(void *) if
- * the compiler supports (void *); otherwise it will be
- * sizeof(char *).
+/* HAS_GETHOST_PROTOS:
+ * This symbol, if defined, indicates that <netdb.h> includes
+ * prototypes for gethostent(), gethostbyname(), and
+ * gethostbyaddr(). Otherwise, it is up to the program to guess
+ * them. See netdbtype.U for probing for various Netdb_xxx_t types.
*/
-#define PTRSIZE $ptrsize /**/
+#$d_gethostprotos HAS_GETHOST_PROTOS /**/
-/* Drand01:
- * This macro is to be used to generate uniformly distributed
- * random numbers over the range [0., 1.[. You may have to supply
- * an 'extern double drand48();' in your program since SunOS 4.1.3
- * doesn't provide you with anything relevant in it's headers.
- * See HAS_DRAND48_PROTO.
- */
-/* Rand_seed_t:
- * This symbol defines the type of the argument of the
- * random seed function.
- */
-/* seedDrand01:
- * This symbol defines the macro to be used in seeding the
- * random number generator (see Drand01).
- */
-/* RANDBITS:
- * This symbol indicates how many bits are produced by the
- * function used to generate normalized random numbers.
- * Values include 15, 16, 31, and 48.
+/* HAS_GETMNT:
+ * This symbol, if defined, indicates that the getmnt routine is
+ * available to get filesystem mount info by filename.
*/
-#define Drand01() $drand01 /**/
-#define Rand_seed_t $randseedtype /**/
-#define seedDrand01(x) $seedfunc((Rand_seed_t)x) /**/
-#define RANDBITS $randbits /**/
+#$d_getmnt HAS_GETMNT /**/
-/* SSize_t:
- * This symbol holds the type used by functions that return
- * a count of bytes or an error condition. It must be a signed type.
- * It is usually ssize_t, but may be long or int, etc.
- * It may be necessary to include <sys/types.h> or <unistd.h>
- * to get any typedef'ed information.
- * We will pick a type such that sizeof(SSize_t) == sizeof(Size_t).
+/* HAS_GETMNTENT:
+ * This symbol, if defined, indicates that the getmntent routine is
+ * available to iterate through mounted file systems to get their info.
*/
-#define SSize_t $ssizetype /* signed count of bytes */
+#$d_getmntent HAS_GETMNTENT /**/
-/* EBCDIC:
- * This symbol, if defined, indicates that this system uses
- * EBCDIC encoding.
+/* HAS_GETNETBYADDR:
+ * This symbol, if defined, indicates that the getnetbyaddr() routine is
+ * available to look up networks by their IP addresses.
*/
-#$ebcdic EBCDIC /**/
+#$d_getnbyaddr HAS_GETNETBYADDR /**/
-/* ARCHLIB:
- * This variable, if defined, holds the name of the directory in
- * which the user wants to put architecture-dependent public
- * library files for $package. It is most often a local directory
- * such as /usr/local/lib. Programs using this variable must be
- * prepared to deal with filename expansion. If ARCHLIB is the
- * same as PRIVLIB, it is not defined, since presumably the
- * program already searches PRIVLIB.
- */
-/* ARCHLIB_EXP:
- * This symbol contains the ~name expanded version of ARCHLIB, to be used
- * in programs that are not prepared to deal with ~ expansion at run-time.
+/* HAS_GETNETBYNAME:
+ * This symbol, if defined, indicates that the getnetbyname() routine is
+ * available to look up networks by their names.
*/
-#$d_archlib ARCHLIB "$archlib" /**/
-#$d_archlib ARCHLIB_EXP "$archlibexp" /**/
+#$d_getnbyname HAS_GETNETBYNAME /**/
-/* BIN:
- * This symbol holds the path of the bin directory where the package will
- * be installed. Program must be prepared to deal with ~name substitution.
- */
-/* BIN_EXP:
- * This symbol is the filename expanded version of the BIN symbol, for
- * programs that do not want to deal with that at run-time.
+/* HAS_GETNETENT:
+ * This symbol, if defined, indicates that the getnetent() routine is
+ * available to look up network names in some data base or another.
*/
-#define BIN "$bin" /**/
-#define BIN_EXP "$binexp" /**/
+#$d_getnent HAS_GETNETENT /**/
-/* INSTALL_USR_BIN_PERL:
- * This symbol, if defined, indicates that Perl is to be installed
- * also as /usr/bin/perl.
+/* HAS_GETNET_PROTOS:
+ * This symbol, if defined, indicates that <netdb.h> includes
+ * prototypes for getnetent(), getnetbyname(), and
+ * getnetbyaddr(). Otherwise, it is up to the program to guess
+ * them. See netdbtype.U for probing for various Netdb_xxx_t types.
*/
-#$installusrbinperl INSTALL_USR_BIN_PERL /**/
+#$d_getnetprotos HAS_GETNET_PROTOS /**/
-/* PRIVLIB:
- * This symbol contains the name of the private library for this package.
- * The library is private in the sense that it needn't be in anyone's
- * execution path, but it should be accessible by the world. The program
- * should be prepared to do ~ expansion.
- */
-/* PRIVLIB_EXP:
- * This symbol contains the ~name expanded version of PRIVLIB, to be used
- * in programs that are not prepared to deal with ~ expansion at run-time.
+/* HAS_GETPROTOENT:
+ * This symbol, if defined, indicates that the getprotoent() routine is
+ * available to look up protocols in some data base or another.
*/
-#define PRIVLIB "$privlib" /**/
-#define PRIVLIB_EXP "$privlibexp" /**/
+#$d_getpent HAS_GETPROTOENT /**/
-/* SITEARCH:
- * This symbol contains the name of the private library for this package.
- * The library is private in the sense that it needn't be in anyone's
- * execution path, but it should be accessible by the world. The program
- * should be prepared to do ~ expansion.
- * The standard distribution will put nothing in this directory.
- * After perl has been installed, users may install their own local
- * architecture-dependent modules in this directory with
- * MakeMaker Makefile.PL
- * or equivalent. See INSTALL for details.
+/* HAS_GETPROTOBYNAME:
+ * This symbol, if defined, indicates that the getprotobyname()
+ * routine is available to look up protocols by their name.
*/
-/* SITEARCH_EXP:
- * This symbol contains the ~name expanded version of SITEARCH, to be used
- * in programs that are not prepared to deal with ~ expansion at run-time.
+/* HAS_GETPROTOBYNUMBER:
+ * This symbol, if defined, indicates that the getprotobynumber()
+ * routine is available to look up protocols by their number.
*/
-#$d_sitearch SITEARCH "$sitearch" /**/
-#$d_sitearch SITEARCH_EXP "$sitearchexp" /**/
+#$d_getpbyname HAS_GETPROTOBYNAME /**/
+#$d_getpbynumber HAS_GETPROTOBYNUMBER /**/
-/* SITELIB:
- * This symbol contains the name of the private library for this package.
- * The library is private in the sense that it needn't be in anyone's
- * execution path, but it should be accessible by the world. The program
- * should be prepared to do ~ expansion.
- * The standard distribution will put nothing in this directory.
- * After perl has been installed, users may install their own local
- * architecture-independent modules in this directory with
- * MakeMaker Makefile.PL
- * or equivalent. See INSTALL for details.
+/* HAS_GETPROTO_PROTOS:
+ * This symbol, if defined, indicates that <netdb.h> includes
+ * prototypes for getprotoent(), getprotobyname(), and
+ * getprotobyaddr(). Otherwise, it is up to the program to guess
+ * them. See netdbtype.U for probing for various Netdb_xxx_t types.
*/
-/* SITELIB_EXP:
- * This symbol contains the ~name expanded version of SITELIB, to be used
- * in programs that are not prepared to deal with ~ expansion at run-time.
+#$d_getprotoprotos HAS_GETPROTO_PROTOS /**/
+
+/* HAS_GETPWENT:
+ * This symbol, if defined, indicates that the getpwent routine is
+ * available for sequential access of the passwd database.
+ * If this is not available, the older getpw() function may be available.
*/
-#define SITELIB "$sitelib" /**/
-#define SITELIB_EXP "$sitelibexp" /**/
+#$d_getpwent HAS_GETPWENT /**/
-/* PERL_VENDORLIB_EXP:
- * This symbol contains the ~name expanded version of VENDORLIB, to be used
- * in programs that are not prepared to deal with ~ expansion at run-time.
+/* HAS_GETSERVENT:
+ * This symbol, if defined, indicates that the getservent() routine is
+ * available to look up network services in some data base or another.
*/
-#$d_vendorlib PERL_VENDORLIB_EXP "$vendorlibexp" /**/
+#$d_getsent HAS_GETSERVENT /**/
-/* OSNAME:
- * This symbol contains the name of the operating system, as determined
- * by Configure. You shouldn't rely on it too much; the specific
- * feature tests from Configure are generally more reliable.
+/* HAS_GETSERV_PROTOS:
+ * This symbol, if defined, indicates that <netdb.h> includes
+ * prototypes for getservent(), getservbyname(), and
+ * getservbyaddr(). Otherwise, it is up to the program to guess
+ * them. See netdbtype.U for probing for various Netdb_xxx_t types.
*/
-#define OSNAME "$osname" /**/
+#$d_getservprotos HAS_GETSERV_PROTOS /**/
-/* CAT2:
- * This macro catenates 2 tokens together.
+/* HAS_GETSPENT:
+ * This symbol, if defined, indicates that the getspent system call is
+ * available to retrieve SysV shadow password entries sequentially.
*/
-/* STRINGIFY:
- * This macro surrounds its token with double quotes.
+#$d_getspent HAS_GETSPENT /**/
+
+/* HAS_GETSPNAM:
+ * This symbol, if defined, indicates that the getspnam system call is
+ * available to retrieve SysV shadow password entries by name.
*/
-#if $cpp_stuff == 1
-#define CAT2(a,b)a/**/b
-#define STRINGIFY(a)"a"
- /* If you can get stringification with catify, tell me how! */
-#endif
-#if $cpp_stuff == 42
-#define CAT2(a,b)a ## b
-#define StGiFy(a)# a
-#define STRINGIFY(a)StGiFy(a)
-#endif
-#if $cpp_stuff != 1 && $cpp_stuff != 42
-#include "Bletch: How does this C preprocessor catenate tokens?"
-#endif
+#$d_getspnam HAS_GETSPNAM /**/
-/* CPPSTDIN:
- * This symbol contains the first part of the string which will invoke
- * the C preprocessor on the standard input and produce to standard
- * output. Typical value of "cc -E" or "/lib/cpp", but it can also
- * call a wrapper. See CPPRUN.
+/* HAS_GETSERVBYNAME:
+ * This symbol, if defined, indicates that the getservbyname()
+ * routine is available to look up services by their name.
*/
-/* CPPMINUS:
- * This symbol contains the second part of the string which will invoke
- * the C preprocessor on the standard input and produce to standard
- * output. This symbol will have the value "-" if CPPSTDIN needs a minus
- * to specify standard input, otherwise the value is "".
+/* HAS_GETSERVBYPORT:
+ * This symbol, if defined, indicates that the getservbyport()
+ * routine is available to look up services by their port.
*/
-/* CPPRUN:
- * This symbol contains the string which will invoke a C preprocessor on
- * the standard input and produce to standard output. It needs to end
- * with CPPLAST, after all other preprocessor flags have been specified.
- * The main difference with CPPSTDIN is that this program will never be a
- * pointer to a shell wrapper, i.e. it will be empty if no preprocessor is
- * available directly to the user. Note that it may well be different from
- * the preprocessor used to compile the C program.
+#$d_getsbyname HAS_GETSERVBYNAME /**/
+#$d_getsbyport HAS_GETSERVBYPORT /**/
+
+/* HAS_GNULIBC:
+ * This symbol, if defined, indicates to the C program that
+ * the GNU C library is being used.
*/
-/* CPPLAST:
- * This symbol is intended to be used along with CPPRUN in the same manner
- * symbol CPPMINUS is used with CPPSTDIN. It contains either "-" or "".
+#$d_gnulibc HAS_GNULIBC /**/
+#if defined(HAS_GNULIBC) && !defined(_GNU_SOURCE)
+# define _GNU_SOURCE
+#endif
+/* HAS_HASMNTOPT:
+ * This symbol, if defined, indicates that the hasmntopt routine is
+ * available to query the mount options of file systems.
*/
-#define CPPSTDIN "$cppstdin"
-#define CPPMINUS "$cppminus"
-#define CPPRUN "$cpprun"
-#define CPPLAST "$cpplast"
+#$d_hasmntopt HAS_HASMNTOPT /**/
-/* HAS_ACCESS:
- * This manifest constant lets the C program know that the access()
- * system call is available to check for accessibility using real UID/GID.
- * (always present on UNIX.)
+/* HAS_HTONL:
+ * This symbol, if defined, indicates that the htonl() routine (and
+ * friends htons() ntohl() ntohs()) are available to do network
+ * order byte swapping.
*/
-#$d_access HAS_ACCESS /**/
-
-/* HAS_CSH:
- * This symbol, if defined, indicates that the C-shell exists.
- */
-/* CSH:
- * This symbol, if defined, contains the full pathname of csh.
- */
-#$d_csh HAS_CSH /**/
-#ifdef HAS_CSH
-#define CSH "$full_csh" /**/
-#endif
-
-/* HAS_ENDGRENT:
- * This symbol, if defined, indicates that the getgrent routine is
- * available for finalizing sequential access of the group database.
- */
-#$d_endgrent HAS_ENDGRENT /**/
-
-/* HAS_ENDHOSTENT:
- * This symbol, if defined, indicates that the endhostent() routine is
- * available to close whatever was being used for host queries.
- */
-#$d_endhent HAS_ENDHOSTENT /**/
-
-/* HAS_ENDNETENT:
- * This symbol, if defined, indicates that the endnetent() routine is
- * available to close whatever was being used for network queries.
- */
-#$d_endnent HAS_ENDNETENT /**/
-
-/* HAS_ENDPROTOENT:
- * This symbol, if defined, indicates that the endprotoent() routine is
- * available to close whatever was being used for protocol queries.
- */
-#$d_endpent HAS_ENDPROTOENT /**/
-
-/* HAS_ENDPWENT:
- * This symbol, if defined, indicates that the getgrent routine is
- * available for finalizing sequential access of the passwd database.
- */
-#$d_endpwent HAS_ENDPWENT /**/
-
-/* HAS_ENDSERVENT:
- * This symbol, if defined, indicates that the endservent() routine is
- * available to close whatever was being used for service queries.
- */
-#$d_endsent HAS_ENDSERVENT /**/
-
-/* HAS_GETGRENT:
- * This symbol, if defined, indicates that the getgrent routine is
- * available for sequential access of the group database.
- */
-#$d_getgrent HAS_GETGRENT /**/
-
-/* HAS_GETHOSTBYADDR:
- * This symbol, if defined, indicates that the gethostbyaddr() routine is
- * available to look up hosts by their IP addresses.
- */
-#$d_gethbyaddr HAS_GETHOSTBYADDR /**/
-
-/* HAS_GETHOSTBYNAME:
- * This symbol, if defined, indicates that the gethostbyname() routine is
- * available to look up host names in some data base or other.
- */
-#$d_gethbyname HAS_GETHOSTBYNAME /**/
-
-/* HAS_GETHOSTENT:
- * This symbol, if defined, indicates that the gethostent() routine is
- * available to look up host names in some data base or another.
- */
-#$d_gethent HAS_GETHOSTENT /**/
-
-/* HAS_GETHOSTNAME:
- * This symbol, if defined, indicates that the C program may use the
- * gethostname() routine to derive the host name. See also HAS_UNAME
- * and PHOSTNAME.
- */
-/* HAS_UNAME:
- * This symbol, if defined, indicates that the C program may use the
- * uname() routine to derive the host name. See also HAS_GETHOSTNAME
- * and PHOSTNAME.
- */
-/* PHOSTNAME:
- * This symbol, if defined, indicates the command to feed to the
- * popen() routine to derive the host name. See also HAS_GETHOSTNAME
- * and HAS_UNAME. Note that the command uses a fully qualified path,
- * so that it is safe even if used by a process with super-user
- * privileges.
- */
-/* HAS_PHOSTNAME:
- * This symbol, if defined, indicates that the C program may use the
- * contents of PHOSTNAME as a command to feed to the popen() routine
- * to derive the host name.
- */
-#$d_gethname HAS_GETHOSTNAME /**/
-#$d_uname HAS_UNAME /**/
-#$d_phostname HAS_PHOSTNAME /**/
-#ifdef HAS_PHOSTNAME
-#define PHOSTNAME "$aphostname" /* How to get the host name */
-#endif
-
-/* HAS_GETNETBYADDR:
- * This symbol, if defined, indicates that the getnetbyaddr() routine is
- * available to look up networks by their IP addresses.
- */
-#$d_getnbyaddr HAS_GETNETBYADDR /**/
-
-/* HAS_GETNETBYNAME:
- * This symbol, if defined, indicates that the getnetbyname() routine is
- * available to look up networks by their names.
- */
-#$d_getnbyname HAS_GETNETBYNAME /**/
-
-/* HAS_GETNETENT:
- * This symbol, if defined, indicates that the getnetent() routine is
- * available to look up network names in some data base or another.
- */
-#$d_getnent HAS_GETNETENT /**/
-
-/* HAS_GETPROTOENT:
- * This symbol, if defined, indicates that the getprotoent() routine is
- * available to look up protocols in some data base or another.
- */
-#$d_getpent HAS_GETPROTOENT /**/
-
-/* HAS_GETPROTOBYNAME:
- * This symbol, if defined, indicates that the getprotobyname()
- * routine is available to look up protocols by their name.
- */
-/* HAS_GETPROTOBYNUMBER:
- * This symbol, if defined, indicates that the getprotobynumber()
- * routine is available to look up protocols by their number.
- */
-#$d_getpbyname HAS_GETPROTOBYNAME /**/
-#$d_getpbynumber HAS_GETPROTOBYNUMBER /**/
-
-/* HAS_GETPWENT:
- * This symbol, if defined, indicates that the getpwent routine is
- * available for sequential access of the passwd database.
- * If this is not available, the older getpw() function may be available.
- */
-#$d_getpwent HAS_GETPWENT /**/
-
-/* HAS_GETSERVENT:
- * This symbol, if defined, indicates that the getservent() routine is
- * available to look up network services in some data base or another.
- */
-#$d_getsent HAS_GETSERVENT /**/
-
-/* HAS_GETSERVBYNAME:
- * This symbol, if defined, indicates that the getservbyname()
- * routine is available to look up services by their name.
- */
-/* HAS_GETSERVBYPORT:
- * This symbol, if defined, indicates that the getservbyport()
- * routine is available to look up services by their port.
- */
-#$d_getsbyname HAS_GETSERVBYNAME /**/
-#$d_getsbyport HAS_GETSERVBYPORT /**/
-
-/* HAS_HTONL:
- * This symbol, if defined, indicates that the htonl() routine (and
- * friends htons() ntohl() ntohs()) are available to do network
- * order byte swapping.
- */
-/* HAS_HTONS:
- * This symbol, if defined, indicates that the htons() routine (and
- * friends htonl() ntohl() ntohs()) are available to do network
- * order byte swapping.
+/* HAS_HTONS:
+ * This symbol, if defined, indicates that the htons() routine (and
+ * friends htonl() ntohl() ntohs()) are available to do network
+ * order byte swapping.
*/
/* HAS_NTOHL:
* This symbol, if defined, indicates that the ntohl() routine (and
#$d_htonl HAS_NTOHL /**/
#$d_htonl HAS_NTOHS /**/
+/* HAS_ICONV:
+ * This symbol, if defined, indicates that the iconv routine is
+ * available to do character set conversions.
+ */
+#$d_iconv HAS_ICONV /**/
+
+/* HAS_INT64_T:
+ * This symbol will defined if the C compiler supports int64_t.
+ * Usually the <inttypes.h> needs to be included, but sometimes
+ * <sys/types.h> is enough.
+ */
+#$d_int64_t HAS_INT64_T /**/
+
+/* HAS_ISASCII:
+ * This manifest constant lets the C program know that isascii
+ * is available.
+ */
+#$d_isascii HAS_ISASCII /**/
+
+/* HAS_LCHOWN:
+ * This symbol, if defined, indicates that the lchown routine is
+ * available to operate on a symbolic link (instead of following the
+ * link).
+ */
+#$d_lchown HAS_LCHOWN /**/
+
+/* HAS_LDBL_DIG:
+ * This symbol, if defined, indicates that this system's <float.h>
+ * or <limits.h> defines the symbol LDBL_DIG, which is the number
+ * of significant digits in a long double precision number. Unlike
+ * for DBL_DIG, there's no good guess for LDBL_DIG if it is undefined.
+ */
+#$d_ldbl_dig HAS_LDBL_DIG /* */
+
/* HAS_LONG_DOUBLE:
* This symbol will be defined if the C compiler supports long
* doubles.
*/
#$d_memchr HAS_MEMCHR /**/
-/* HAS_MSG:
- * This symbol, if defined, indicates that the entire msg*(2) library is
- * supported (IPC mechanism based on message queues).
+/* HAS_MKDTEMP:
+ * This symbol, if defined, indicates that the mkdtemp routine is
+ * available to exclusively create a uniquely named temporary directory.
*/
-#$d_msg HAS_MSG /**/
+#$d_mkdtemp HAS_MKDTEMP /**/
-/* HAS_SEM:
- * This symbol, if defined, indicates that the entire sem*(2) library is
- * supported.
+/* HAS_MKSTEMP:
+ * This symbol, if defined, indicates that the mkstemp routine is
+ * available to exclusively create and open a uniquely named
+ * temporary file.
*/
-#$d_sem HAS_SEM /**/
+#$d_mkstemp HAS_MKSTEMP /**/
-/* HAS_SETGRENT:
- * This symbol, if defined, indicates that the setgrent routine is
- * available for initializing sequential access of the group database.
+/* HAS_MKSTEMPS:
+ * This symbol, if defined, indicates that the mkstemps routine is
+ * available to excluslvely create and open a uniquely named
+ * (with a suffix) temporary file.
*/
-#$d_setgrent HAS_SETGRENT /**/
+#$d_mkstemps HAS_MKSTEMPS /**/
-/* HAS_SETGROUPS:
- * This symbol, if defined, indicates that the setgroups() routine is
- * available to set the list of process groups. If unavailable, multiple
- * groups are probably not supported.
+/* HAS_MMAP:
+ * This symbol, if defined, indicates that the mmap system call is
+ * available to map a file into memory.
*/
-#$d_setgrps HAS_SETGROUPS /**/
-
-/* HAS_SETHOSTENT:
- * This symbol, if defined, indicates that the sethostent() routine is
- * available.
+/* Mmap_t:
+ * This symbol holds the return type of the mmap() system call
+ * (and simultaneously the type of the first argument).
+ * Usually set to 'void *' or 'cadd_t'.
*/
-#$d_sethent HAS_SETHOSTENT /**/
+#$d_mmap HAS_MMAP /**/
+#define Mmap_t $mmaptype /**/
-/* HAS_SETNETENT:
- * This symbol, if defined, indicates that the setnetent() routine is
- * available.
+/* HAS_MPROTECT:
+ * This symbol, if defined, indicates that the mprotect system call is
+ * available to modify the access protection of a memory mapped file.
*/
-#$d_setnent HAS_SETNETENT /**/
+#$d_mprotect HAS_MPROTECT /**/
-/* HAS_SETPROTOENT:
- * This symbol, if defined, indicates that the setprotoent() routine is
- * available.
+/* HAS_MSG:
+ * This symbol, if defined, indicates that the entire msg*(2) library is
+ * supported (IPC mechanism based on message queues).
*/
-#$d_setpent HAS_SETPROTOENT /**/
+#$d_msg HAS_MSG /**/
-/* HAS_SETPWENT:
- * This symbol, if defined, indicates that the setpwent routine is
- * available for initializing sequential access of the passwd database.
+/* HAS_OFF64_T:
+ * This symbol will be defined if the C compiler supports off64_t.
*/
-#$d_setpwent HAS_SETPWENT /**/
+#$d_off64_t HAS_OFF64_T /**/
-/* HAS_SETSERVENT:
- * This symbol, if defined, indicates that the setservent() routine is
- * available.
+/* HAS_OPEN3:
+ * This manifest constant lets the C program know that the three
+ * argument form of open(2) is available.
*/
-#$d_setsent HAS_SETSERVENT /**/
+#$d_open3 HAS_OPEN3 /**/
-/* HAS_SETVBUF:
- * This symbol, if defined, indicates that the setvbuf routine is
- * available to change buffering on an open stdio stream.
- * to a line-buffered mode.
+/* OLD_PTHREAD_CREATE_JOINABLE:
+ * This symbol, if defined, indicates how to create pthread
+ * in joinable (aka undetached) state. NOTE: not defined
+ * if pthread.h already has defined PTHREAD_CREATE_JOINABLE
+ * (the new version of the constant).
+ * If defined, known values are PTHREAD_CREATE_UNDETACHED
+ * and __UNDETACHED.
*/
-#$d_setvbuf HAS_SETVBUF /**/
+#$d_old_pthread_create_joinable OLD_PTHREAD_CREATE_JOINABLE $old_pthread_create_joinable /**/
+
+/* HAS_PTHREAD_YIELD:
+ * This symbol, if defined, indicates that the pthread_yield
+ * routine is available to yield the execution of the current
+ * thread. sched_yield is preferable to pthread_yield.
+ */
+/* SCHED_YIELD:
+ * This symbol defines the way to yield the execution of
+ * the current thread. Known ways are sched_yield,
+ * pthread_yield, and pthread_yield with NULL.
+ */
+/* HAS_SCHED_YIELD:
+ * This symbol, if defined, indicates that the sched_yield
+ * routine is available to yield the execution of the current
+ * thread. sched_yield is preferable to pthread_yield.
+ */
+#$d_pthread_yield HAS_PTHREAD_YIELD /**/
+#define SCHED_YIELD $sched_yield /**/
+#$d_sched_yield HAS_SCHED_YIELD /**/
+
+/* HAS_SAFE_BCOPY:
+ * This symbol, if defined, indicates that the bcopy routine is available
+ * to copy potentially overlapping memory blocks. Otherwise you should
+ * probably use memmove() or memcpy(). If neither is defined, roll your
+ * own version.
+ */
+#$d_safebcpy HAS_SAFE_BCOPY /**/
+
+/* HAS_SAFE_MEMCPY:
+ * This symbol, if defined, indicates that the memcpy routine is available
+ * to copy potentially overlapping memory blocks. Otherwise you should
+ * probably use memmove() or memcpy(). If neither is defined, roll your
+ * own version.
+ */
+#$d_safemcpy HAS_SAFE_MEMCPY /**/
+
+/* HAS_SANE_MEMCMP:
+ * This symbol, if defined, indicates that the memcmp routine is available
+ * and can be used to compare relative magnitudes of chars with their high
+ * bits set. If it is not defined, roll your own version.
+ */
+#$d_sanemcmp HAS_SANE_MEMCMP /**/
+
+/* HAS_SEM:
+ * This symbol, if defined, indicates that the entire sem*(2) library is
+ * supported.
+ */
+#$d_sem HAS_SEM /**/
+
+/* HAS_SETGRENT:
+ * This symbol, if defined, indicates that the setgrent routine is
+ * available for initializing sequential access of the group database.
+ */
+#$d_setgrent HAS_SETGRENT /**/
+
+/* HAS_SETGROUPS:
+ * This symbol, if defined, indicates that the setgroups() routine is
+ * available to set the list of process groups. If unavailable, multiple
+ * groups are probably not supported.
+ */
+#$d_setgrps HAS_SETGROUPS /**/
+
+/* HAS_SETHOSTENT:
+ * This symbol, if defined, indicates that the sethostent() routine is
+ * available.
+ */
+#$d_sethent HAS_SETHOSTENT /**/
+
+/* HAS_SETNETENT:
+ * This symbol, if defined, indicates that the setnetent() routine is
+ * available.
+ */
+#$d_setnent HAS_SETNETENT /**/
+
+/* HAS_SETPROTOENT:
+ * This symbol, if defined, indicates that the setprotoent() routine is
+ * available.
+ */
+#$d_setpent HAS_SETPROTOENT /**/
+
+/* HAS_SETPWENT:
+ * This symbol, if defined, indicates that the setpwent routine is
+ * available for initializing sequential access of the passwd database.
+ */
+#$d_setpwent HAS_SETPWENT /**/
+
+/* HAS_SETSERVENT:
+ * This symbol, if defined, indicates that the setservent() routine is
+ * available.
+ */
+#$d_setsent HAS_SETSERVENT /**/
+
+/* HAS_SETSPENT:
+ * This symbol, if defined, indicates that the setspent system call is
+ * available to initialize the scan of SysV shadow password entries.
+ */
+#$d_setspent HAS_SETSPENT /**/
+
+/* HAS_SETVBUF:
+ * This symbol, if defined, indicates that the setvbuf routine is
+ * available to change buffering on an open stdio stream.
+ * to a line-buffered mode.
+ */
+#$d_setvbuf HAS_SETVBUF /**/
+
+/* USE_SFIO:
+ * This symbol, if defined, indicates that sfio should
+ * be used.
+ */
+#$d_sfio USE_SFIO /**/
/* HAS_SHM:
* This symbol, if defined, indicates that the entire shm*(2) library is
*/
#$d_shm HAS_SHM /**/
+/* HAS_SIGACTION:
+ * This symbol, if defined, indicates that Vr4's sigaction() routine
+ * is available.
+ */
+#$d_sigaction HAS_SIGACTION /**/
+
+/* HAS_SIGSETJMP:
+ * This variable indicates to the C program that the sigsetjmp()
+ * routine is available to save the calling process's registers
+ * and stack environment for later use by siglongjmp(), and
+ * to optionally save the process's signal mask. See
+ * Sigjmp_buf, Sigsetjmp, and Siglongjmp.
+ */
+/* Sigjmp_buf:
+ * This is the buffer type to be used with Sigsetjmp and Siglongjmp.
+ */
+/* Sigsetjmp:
+ * This macro is used in the same way as sigsetjmp(), but will invoke
+ * traditional setjmp() if sigsetjmp isn't available.
+ * See HAS_SIGSETJMP.
+ */
+/* Siglongjmp:
+ * This macro is used in the same way as siglongjmp(), but will invoke
+ * traditional longjmp() if siglongjmp isn't available.
+ * See HAS_SIGSETJMP.
+ */
+#$d_sigsetjmp HAS_SIGSETJMP /**/
+#ifdef HAS_SIGSETJMP
+#define Sigjmp_buf sigjmp_buf
+#define Sigsetjmp(buf,save_mask) sigsetjmp((buf),(save_mask))
+#define Siglongjmp(buf,retval) siglongjmp((buf),(retval))
+#else
+#define Sigjmp_buf jmp_buf
+#define Sigsetjmp(buf,save_mask) setjmp((buf))
+#define Siglongjmp(buf,retval) longjmp((buf),(retval))
+#endif
+
/* HAS_SOCKET:
* This symbol, if defined, indicates that the BSD socket interface is
* supported.
#$d_msg_proxy HAS_MSG_PROXY /**/
#$d_scm_rights HAS_SCM_RIGHTS /**/
+/* HAS_SQRTL:
+ * This symbol, if defined, indicates that the sqrtl routine is
+ * available to do long double square roots.
+ */
+#$d_sqrtl HAS_SQRTL /**/
+
/* USE_STAT_BLOCKS:
* This symbol is defined if this system has a stat structure declaring
* st_blksize and st_blocks.
#$d_statblks USE_STAT_BLOCKS /**/
#endif
+/* HAS_STRUCT_STATFS_F_FLAGS:
+ * This symbol, if defined, indicates that the struct statfs
+ * does have the f_flags member containing the mount flags of
+ * the filesystem containing the file.
+ * This kind of struct statfs is coming from <sys/mount.h> (BSD 4.3),
+ * not from <sys/statfs.h> (SYSV). Older BSDs (like Ultrix) do not
+ * have statfs() and struct statfs, they have ustat() and getmnt()
+ * with struct ustat and struct fs_data.
+ */
+#$d_statfs_f_flags HAS_STRUCT_STATFS_F_FLAGS /**/
+
+/* HAS_STRUCT_STATFS:
+ * This symbol, if defined, indicates that the struct statfs
+ * to do statfs() is supported.
+ */
+#$d_statfs_s HAS_STRUCT_STATFS /**/
+
+/* HAS_FSTATVFS:
+ * This symbol, if defined, indicates that the fstatvfs routine is
+ * available to stat filesystems by file descriptors.
+ */
+#$d_fstatvfs HAS_FSTATVFS /**/
+
+/* USE_STDIO_PTR:
+ * This symbol is defined if the _ptr and _cnt fields (or similar)
+ * of the stdio FILE structure can be used to access the stdio buffer
+ * for a file handle. If this is defined, then the FILE_ptr(fp)
+ * and FILE_cnt(fp) macros will also be defined and should be used
+ * to access these fields.
+ */
+/* FILE_ptr:
+ * This macro is used to access the _ptr field (or equivalent) of the
+ * FILE structure pointed to by its argument. This macro will always be
+ * defined if USE_STDIO_PTR is defined.
+ */
+/* STDIO_PTR_LVALUE:
+ * This symbol is defined if the FILE_ptr macro can be used as an
+ * lvalue.
+ */
+/* FILE_cnt:
+ * This macro is used to access the _cnt field (or equivalent) of the
+ * FILE structure pointed to by its argument. This macro will always be
+ * defined if USE_STDIO_PTR is defined.
+ */
+/* STDIO_CNT_LVALUE:
+ * This symbol is defined if the FILE_cnt macro can be used as an
+ * lvalue.
+ */
+#$d_stdstdio USE_STDIO_PTR /**/
+#ifdef USE_STDIO_PTR
+#define FILE_ptr(fp) $stdio_ptr
+#$d_stdio_ptr_lval STDIO_PTR_LVALUE /**/
+#define FILE_cnt(fp) $stdio_cnt
+#$d_stdio_cnt_lval STDIO_CNT_LVALUE /**/
+#endif
+
+/* USE_STDIO_BASE:
+ * This symbol is defined if the _base field (or similar) of the
+ * stdio FILE structure can be used to access the stdio buffer for
+ * a file handle. If this is defined, then the FILE_base(fp) macro
+ * will also be defined and should be used to access this field.
+ * Also, the FILE_bufsiz(fp) macro will be defined and should be used
+ * to determine the number of bytes in the buffer. USE_STDIO_BASE
+ * will never be defined unless USE_STDIO_PTR is.
+ */
+/* FILE_base:
+ * This macro is used to access the _base field (or equivalent) of the
+ * FILE structure pointed to by its argument. This macro will always be
+ * defined if USE_STDIO_BASE is defined.
+ */
+/* FILE_bufsiz:
+ * This macro is used to determine the number of bytes in the I/O
+ * buffer pointed to by _base field (or equivalent) of the FILE
+ * structure pointed to its argument. This macro will always be defined
+ * if USE_STDIO_BASE is defined.
+ */
+#$d_stdiobase USE_STDIO_BASE /**/
+#ifdef USE_STDIO_BASE
+#define FILE_base(fp) $stdio_base
+#define FILE_bufsiz(fp) $stdio_bufsiz
+#endif
+
/* HAS_STRERROR:
* This symbol, if defined, indicates that the strerror routine is
* available to translate error numbers to strings. See the writeup
#$d_syserrlst HAS_SYS_ERRLIST /**/
#define Strerror(e) $d_strerrm
-/* HAS_UNION_SEMUN:
- * This symbol, if defined, indicates that the union semun is
- * defined by including <sys/sem.h>. If not, the user code
- * probably needs to define it as:
- * union semun {
- * int val;
- * struct semid_ds *buf;
- * unsigned short *array;
- * }
- */
-/* USE_SEMCTL_SEMUN:
- * This symbol, if defined, indicates that union semun is
- * used for semctl IPC_STAT.
+/* HAS_STRTOLD:
+ * This symbol, if defined, indicates that the strtold routine is
+ * available to convert strings to long doubles.
*/
-/* USE_SEMCTL_SEMID_DS:
- * This symbol, if defined, indicates that struct semid_ds * is
- * used for semctl IPC_STAT.
+#$d_strtold HAS_STRTOLD /**/
+
+/* HAS_STRTOLL:
+ * This symbol, if defined, indicates that the strtoll routine is
+ * available to convert strings to long longs.
*/
-#$d_union_semun HAS_UNION_SEMUN /**/
-#$d_semctl_semun USE_SEMCTL_SEMUN /**/
-#$d_semctl_semid_ds USE_SEMCTL_SEMID_DS /**/
+#$d_strtoll HAS_STRTOLL /**/
-/* HAS_VFORK:
+/* HAS_STRTOULL:
+ * This symbol, if defined, indicates that the strtoull routine is
+ * available to convert strings to unsigned long longs.
+ */
+#$d_strtoull HAS_STRTOULL /**/
+
+/* HAS_STRTOUQ:
+ * This symbol, if defined, indicates that the strtouq routine is
+ * available to convert strings to unsigned long longs (quads).
+ */
+#$d_strtouq HAS_STRTOUQ /**/
+
+/* HAS_TELLDIR_PROTO:
+ * This symbol, if defined, indicates that the system provides
+ * a prototype for the telldir() function. Otherwise, it is up
+ * to the program to supply one. A good guess is
+ * extern long telldir _((DIR*));
+ */
+#$d_telldirproto HAS_TELLDIR_PROTO /**/
+
+/* Time_t:
+ * This symbol holds the type returned by time(). It can be long,
+ * or time_t on BSD sites (in which case <sys/types.h> should be
+ * included).
+ */
+#define Time_t $timetype /* Time type */
+
+/* HAS_TIMES:
+ * This symbol, if defined, indicates that the times() routine exists.
+ * Note that this became obsolete on some systems (SUNOS), which now
+ * use getrusage(). It may be necessary to include <sys/times.h>.
+ */
+#$d_times HAS_TIMES /**/
+
+/* HAS_UNION_SEMUN:
+ * This symbol, if defined, indicates that the union semun is
+ * defined by including <sys/sem.h>. If not, the user code
+ * probably needs to define it as:
+ * union semun {
+ * int val;
+ * struct semid_ds *buf;
+ * unsigned short *array;
+ * }
+ */
+/* USE_SEMCTL_SEMUN:
+ * This symbol, if defined, indicates that union semun is
+ * used for semctl IPC_STAT.
+ */
+/* USE_SEMCTL_SEMID_DS:
+ * This symbol, if defined, indicates that struct semid_ds * is
+ * used for semctl IPC_STAT.
+ */
+#$d_union_semun HAS_UNION_SEMUN /**/
+#$d_semctl_semun USE_SEMCTL_SEMUN /**/
+#$d_semctl_semid_ds USE_SEMCTL_SEMID_DS /**/
+
+/* HAS_USTAT:
+ * This symbol, if defined, indicates that the ustat system call is
+ * available to query file system statistics by dev_t.
+ */
+#$d_ustat HAS_USTAT /**/
+
+/* HAS_VFORK:
* This symbol, if defined, indicates that vfork() exists.
*/
#$d_vfork HAS_VFORK /**/
*/
#define Signal_t $signal_t /* Signal handler's return type */
+/* HAS_VPRINTF:
+ * This symbol, if defined, indicates that the vprintf routine is available
+ * to printf with a pointer to an argument list. If unavailable, you
+ * may need to write your own, probably in terms of _doprnt().
+ */
+/* USE_CHAR_VSPRINTF:
+ * This symbol is defined if this system has vsprintf() returning type
+ * (char*). The trend seems to be to declare it as "int vsprintf()". It
+ * is up to the package author to declare vsprintf correctly based on the
+ * symbol.
+ */
+#$d_vprintf HAS_VPRINTF /**/
+#$d_charvspr USE_CHAR_VSPRINTF /**/
+
+/* USE_DYNAMIC_LOADING:
+ * This symbol, if defined, indicates that dynamic loading of
+ * some sort is available.
+ */
+#$usedl USE_DYNAMIC_LOADING /**/
+
+/* DOUBLESIZE:
+ * This symbol contains the size of a double, so that the C preprocessor
+ * can make decisions based on it.
+ */
+#define DOUBLESIZE $doublesize /**/
+
+/* EBCDIC:
+ * This symbol, if defined, indicates that this system uses
+ * EBCDIC encoding.
+ */
+#$ebcdic EBCDIC /**/
+
+/* FFLUSH_NULL:
+ * This symbol, if defined, tells that fflush(NULL) does flush
+ * all pending stdio output.
+ */
+/* FFLUSH_ALL:
+ * This symbol, if defined, tells that to flush
+ * all pending stdio output one must loop through all
+ * the stdio file handles stored in an array and fflush them.
+ * Note that if fflushNULL is defined, fflushall will not
+ * even be probed for and will be left undefined.
+ */
+#$fflushNULL FFLUSH_NULL /**/
+#$fflushall FFLUSH_ALL /**/
+
+/* Fpos_t:
+ * This symbol holds the type used to declare file positions in libc.
+ * It can be fpos_t, long, uint, etc... It may be necessary to include
+ * <sys/types.h> to get any typedef'ed information.
+ */
+#define Fpos_t $fpostype /* File position type */
+
+/* Gid_t_f:
+ * This symbol defines the format string used for printing a Gid_t.
+ */
+#define Gid_t_f $gidformat /**/
+
+/* Gid_t_size:
+ * This symbol holds the size of a Gid_t in bytes.
+ */
+#define Gid_t_size $gidsize /* GID size */
+
+/* Gid_t:
+ * This symbol holds the return type of getgid() and the type of
+ * argument to setrgid() and related functions. Typically,
+ * it is the type of group ids in the kernel. It can be int, ushort,
+ * uid_t, etc... It may be necessary to include <sys/types.h> to get
+ * any typedef'ed information.
+ */
+#define Gid_t $gidtype /* Type for getgid(), etc... */
+
/* Groups_t:
* This symbol holds the type used for the second argument to
* getgroups() and setgropus(). Usually, this is the same as
#define Groups_t $groupstype /* Type for 2nd arg to [sg]etgroups() */
#endif
+/* DB_Prefix_t:
+ * This symbol contains the type of the prefix structure element
+ * in the <db.h> header file. In older versions of DB, it was
+ * int, while in newer ones it is u_int32_t.
+ */
+/* DB_Hash_t:
+ * This symbol contains the type of the prefix structure element
+ * in the <db.h> header file. In older versions of DB, it was
+ * int, while in newer ones it is size_t.
+ */
+#define DB_Hash_t $db_hashtype /**/
+#define DB_Prefix_t $db_prefixtype /**/
+
/* I_GRP:
* This symbol, if defined, indicates to the C program that it should
* include <grp.h>.
#$i_grp I_GRP /**/
#$d_grpasswd GRPASSWD /**/
+/* I_ICONV:
+ * This symbol, if defined, indicates that <iconv.h> exists and
+ * should be included.
+ */
+#$i_iconv I_ICONV /**/
+
+/* I_INTTYPES:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <inttypes.h>.
+ */
+#$i_inttypes I_INTTYPES /**/
+
+/* I_MACH_CTHREADS:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <mach/cthreads.h>.
+ */
+#$i_machcthr I_MACH_CTHREADS /**/
+
+/* I_MNTENT:
+ * This symbol, if defined, indicates that <mntent.h> exists and
+ * should be included.
+ */
+#$i_mntent I_MNTENT /**/
+
/* I_NETDB:
* This symbol, if defined, indicates that <netdb.h> exists and
* should be included.
*/
#$i_netdb I_NETDB /**/
+/* I_NETINET_TCP:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <netinet/tcp.h>.
+ */
+#$i_netinettcp I_NETINET_TCP /**/
+
+/* I_POLL:
+ * This symbol, if defined, indicates that <poll.h> exists and
+ * should be included.
+ */
+#$i_poll I_POLL /**/
+
+/* I_PTHREAD:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <pthread.h>.
+ */
+#$i_pthread I_PTHREAD /**/
+
/* I_PWD:
* This symbol, if defined, indicates to the C program that it should
* include <pwd.h>.
#$d_pwgecos PWGECOS /**/
#$d_pwpasswd PWPASSWD /**/
-/* I_SYSUIO:
- * This symbol, if defined, indicates that <sys/uio.h> exists and
+/* I_SHADOW:
+ * This symbol, if defined, indicates that <shadow.h> exists and
* should be included.
*/
-#$i_sysuio I_SYSUIO /**/
+#$i_shadow I_SHADOW /**/
-/* Free_t:
- * This variable contains the return type of free(). It is usually
- * void, but occasionally int.
- */
-/* Malloc_t:
- * This symbol is the type of pointer returned by malloc and realloc.
+/* I_SOCKS:
+ * This symbol, if defined, indicates that <socks.h> exists and
+ * should be included.
*/
-#define Malloc_t $malloctype /**/
-#define Free_t $freetype /**/
+#$i_socks I_SOCKS /**/
-/* MYMALLOC:
- * This symbol, if defined, indicates that we're using our own malloc.
+/* I_SYSLOG:
+ * This symbol, if defined, indicates that <syslog.h> exists and
+ * should be included.
*/
-#$d_mymalloc MYMALLOC /**/
+#$i_syslog I_SYSLOG /**/
-/* SIG_NAME:
- * This symbol contains a list of signal names in order of
- * signal number. This is intended
- * to be used as a static array initialization, like this:
- * char *sig_name[] = { SIG_NAME };
- * The signals in the list are separated with commas, and each signal
- * is surrounded by double quotes. There is no leading SIG in the signal
- * name, i.e. SIGQUIT is known as "QUIT".
- * Gaps in the signal numbers (up to NSIG) are filled in with NUMnn,
- * etc., where nn is the actual signal number (e.g. NUM37).
- * The signal number for sig_name[i] is stored in sig_num[i].
- * The last element is 0 to terminate the list with a NULL. This
- * corresponds to the 0 at the end of the sig_num list.
+/* I_SYSMODE:
+ * This symbol, if defined, indicates that <sys/mode.h> exists and
+ * should be included.
*/
-/* SIG_NUM:
- * This symbol contains a list of signal numbers, in the same order as the
- * SIG_NAME list. It is suitable for static array initialization, as in:
- * int sig_num[] = { SIG_NUM };
- * The signals in the list are separated with commas, and the indices
- * within that list and the SIG_NAME list match, so it's easy to compute
- * the signal name from a number or vice versa at the price of a small
- * dynamic linear lookup.
- * Duplicates are allowed, but are moved to the end of the list.
- * The signal number corresponding to sig_name[i] is sig_number[i].
- * if (i < NSIG) then sig_number[i] == i.
- * The last element is 0, corresponding to the 0 at the end of
- * the sig_name list.
+#$i_sysmode I_SYSMODE /**/
+
+/* I_SYS_MOUNT:
+ * This symbol, if defined, indicates that <sys/mount.h> exists and
+ * should be included.
*/
-#define SIG_NAME $sig_name_init /**/
-#define SIG_NUM $sig_num_init /**/
+#$i_sysmount I_SYS_MOUNT /**/
-/* VOIDFLAGS:
- * This symbol indicates how much support of the void type is given by this
- * compiler. What various bits mean:
- *
- * 1 = supports declaration of void
- * 2 = supports arrays of pointers to functions returning void
- * 4 = supports comparisons between pointers to void functions and
- * addresses of void functions
- * 8 = suports declaration of generic void pointers
- *
- * The package designer should define VOIDUSED to indicate the requirements
- * of the package. This can be done either by #defining VOIDUSED before
- * including config.h, or by defining defvoidused in Myinit.U. If the
- * latter approach is taken, only those flags will be tested. If the
- * level of void support necessary is not present, defines void to int.
+/* I_SYS_STATFS:
+ * This symbol, if defined, indicates that <sys/statfs.h> exists.
*/
-#ifndef VOIDUSED
-#define VOIDUSED $defvoidused
-#endif
-#define VOIDFLAGS $voidflags
-#if (VOIDFLAGS & VOIDUSED) != VOIDUSED
-#define void int /* is void to be avoided? */
-#define M_VOID /* Xenix strikes again */
-#endif
+#$i_sysstatfs I_SYS_STATFS /**/
-/* HAS_ATOLF:
- * This symbol, if defined, indicates that the atolf routine is
- * available to convert strings into long doubles.
+/* I_SYS_STATVFS:
+ * This symbol, if defined, indicates that <sys/statvfs.h> exists and
+ * should be included.
*/
-#$d_atolf HAS_ATOLF /**/
+#$i_sysstatvfs I_SYS_STATVFS /**/
-/* HAS_ATOLL:
- * This symbol, if defined, indicates that the atoll routine is
- * available to convert strings into long longs.
+/* I_SYSUIO:
+ * This symbol, if defined, indicates that <sys/uio.h> exists and
+ * should be included.
*/
-#$d_atoll HAS_ATOLL /**/
+#$i_sysuio I_SYSUIO /**/
-/* PERL_BINCOMPAT_5005:
- * This symbol, if defined, indicates that Perl 5.006 should be
- * binary-compatible with Perl 5.005. This is impossible for builds
- * that use features like threads and multiplicity it is always $undef
- * for those versions.
+/* I_SYSUTSNAME:
+ * This symbol, if defined, indicates that <sys/utsname.h> exists and
+ * should be included.
*/
-#$d_bincompat5005 PERL_BINCOMPAT_5005 /**/
+#$i_sysutsname I_SYSUTSNAME /**/
-/* DLSYM_NEEDS_UNDERSCORE:
- * This symbol, if defined, indicates that we need to prepend an
- * underscore to the symbol name before calling dlsym(). This only
- * makes sense if you *have* dlsym, which we will presume is the
- * case if you're using dl_dlopen.xs.
+/* I_SYS_VFS:
+ * This symbol, if defined, indicates that <sys/vfs.h> exists and
+ * should be included.
*/
-#$d_dlsymun DLSYM_NEEDS_UNDERSCORE /**/
+#$i_sysvfs I_SYS_VFS /**/
-/* HAS_ENDSPENT:
- * This symbol, if defined, indicates that the endspent system call is
- * available to finalize the scan of SysV shadow password entries.
+/* I_TIME:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <time.h>.
*/
-#$d_endspent HAS_ENDSPENT /**/
-
-/* HAS_STRUCT_FS_DATA:
- * This symbol, if defined, indicates that the struct fs_data
- * to do statfs() is supported.
+/* I_SYS_TIME:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <sys/time.h>.
*/
-#$d_fs_data_s HAS_STRUCT_FS_DATA /**/
-
-/* HAS_FSEEKO:
- * This symbol, if defined, indicates that the fseeko routine is
- * available to fseek beyond 32 bits (useful for ILP32 hosts).
+/* I_SYS_TIME_KERNEL:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <sys/time.h> with KERNEL defined.
*/
-#$d_fseeko HAS_FSEEKO /**/
+#$i_time I_TIME /**/
+#$i_systime I_SYS_TIME /**/
+#$i_systimek I_SYS_TIME_KERNEL /**/
-/* HAS_FSTATFS:
- * This symbol, if defined, indicates that the fstatfs routine is
- * available to stat filesystems by file descriptors.
- */
-#$d_fstatfs HAS_FSTATFS /**/
-/* HAS_FTELLO:
- * This symbol, if defined, indicates that the ftello routine is
- * available to ftell beyond 32 bits (useful for ILP32 hosts).
+/* I_USTAT:
+ * This symbol, if defined, indicates that <ustat.h> exists and
+ * should be included.
*/
-#$d_ftello HAS_FTELLO /**/
+#$i_ustat I_USTAT /**/
-/* HAS_GETMNT:
- * This symbol, if defined, indicates that the getmnt routine is
- * available to get filesystem mount info by filename.
+/* PERL_INC_VERSION_LIST:
+ * This variable specifies the list of subdirectories in over
+ * which perl.c:incpush() and lib/lib.pm will automatically
+ * search when adding directories to @INC, in a format suitable
+ * for a C initialization string. See the inc_version_list entry
+ * in Porting/Glossary for more details.
*/
-#$d_getmnt HAS_GETMNT /**/
+#define PERL_INC_VERSION_LIST $inc_version_list_init /**/
-/* HAS_GETMNTENT:
- * This symbol, if defined, indicates that the getmntent routine is
- * available to iterate through mounted file systems to get their info.
+/* INSTALL_USR_BIN_PERL:
+ * This symbol, if defined, indicates that Perl is to be installed
+ * also as /usr/bin/perl.
*/
-#$d_getmntent HAS_GETMNTENT /**/
+#$installusrbinperl INSTALL_USR_BIN_PERL /**/
-/* HAS_GETSPENT:
- * This symbol, if defined, indicates that the getspent system call is
- * available to retrieve SysV shadow password entries sequentially.
+/* PERL_PRIfldbl:
+ * This symbol, if defined, contains the string used by stdio to
+ * format long doubles (format 'f') for output.
*/
-#$d_getspent HAS_GETSPENT /**/
-
-/* HAS_GETSPNAM:
- * This symbol, if defined, indicates that the getspnam system call is
- * available to retrieve SysV shadow password entries by name.
+/* PERL_PRIgldbl:
+ * This symbol, if defined, contains the string used by stdio to
+ * format long doubles (format 'g') for output.
*/
-#$d_getspnam HAS_GETSPNAM /**/
+#$d_PRIfldbl PERL_PRIfldbl $sPRIfldbl /**/
+#$d_PRIgldbl PERL_PRIgldbl $sPRIgldbl /**/
-/* HAS_HASMNTOPT:
- * This symbol, if defined, indicates that the hasmntopt routine is
- * available to query the mount options of file systems.
+/* Off_t:
+ * This symbol holds the type used to declare offsets in the kernel.
+ * It can be int, long, off_t, etc... It may be necessary to include
+ * <sys/types.h> to get any typedef'ed information.
*/
-#$d_hasmntopt HAS_HASMNTOPT /**/
-
-/* HAS_INT64_T:
- * This symbol will defined if the C compiler supports int64_t.
- * Usually the <inttypes.h> needs to be included, but sometimes
- * <sys/types.h> is enough.
+/* LSEEKSIZE:
+ * This symbol holds the number of bytes used by the Off_t.
*/
-#$d_int64t HAS_INT64_T /**/
-
-/* HAS_LDBL_DIG:
- * This symbol, if defined, indicates that this system's <float.h>
- * or <limits.h> defines the symbol LDBL_DIG, which is the number
- * of significant digits in a long double precision number. Unlike
- * for DBL_DIG, there's no good guess for LDBL_DIG if it is undefined.
+/* Off_t_size:
+ * This symbol holds the number of bytes used by the Off_t.
*/
-#$d_ldbl_dig HAS_LDBL_DIG /* */
+#define Off_t $lseektype /* <offset> type */
+#define LSEEKSIZE $lseeksize /* <offset> size */
+#define Off_t_size $lseeksize /* <offset> size */
-/* HAS_SETSPENT:
- * This symbol, if defined, indicates that the setspent system call is
- * available to initialize the scan of SysV shadow password entries.
+/* Free_t:
+ * This variable contains the return type of free(). It is usually
+ * void, but occasionally int.
*/
-#$d_setspent HAS_SETSPENT /**/
-
-/* USE_SFIO:
- * This symbol, if defined, indicates that sfio should
- * be used.
+/* Malloc_t:
+ * This symbol is the type of pointer returned by malloc and realloc.
*/
-#$d_sfio USE_SFIO /**/
+#define Malloc_t $malloctype /**/
+#define Free_t $freetype /**/
-/* HAS_SQRTL:
- * This symbol, if defined, indicates that the sqrtl routine is
- * available to do long double square roots.
+/* MYMALLOC:
+ * This symbol, if defined, indicates that we're using our own malloc.
*/
-#$d_sqrtl HAS_SQRTL /**/
+#$d_mymalloc MYMALLOC /**/
-/* HAS_STRUCT_STATFS_F_FLAGS:
- * This symbol, if defined, indicates that the struct statfs
- * does have the f_flags member containing the mount flags of
- * the filesystem containing the file.
- * This kind of struct statfs is coming from <sys/mount.h> (BSD 4.3),
- * not from <sys/statfs.h> (SYSV). Older BSDs (like Ultrix) do not
- * have statfs() and struct statfs, they have ustat() and getmnt()
- * with struct ustat and struct fs_data.
+/* Mode_t:
+ * This symbol holds the type used to declare file modes
+ * for systems calls. It is usually mode_t, but may be
+ * int or unsigned short. It may be necessary to include <sys/types.h>
+ * to get any typedef'ed information.
*/
-#$d_statfs_f_flags HAS_STRUCT_STATFS_F_FLAGS /**/
+#define Mode_t $modetype /* file mode parameter for system calls */
-/* HAS_STRUCT_STATFS:
- * This symbol, if defined, indicates that the struct statfs
- * to do statfs() is supported.
+/* VAL_O_NONBLOCK:
+ * This symbol is to be used during open() or fcntl(F_SETFL) to turn on
+ * non-blocking I/O for the file descriptor. Note that there is no way
+ * back, i.e. you cannot turn it blocking again this way. If you wish to
+ * alternatively switch between blocking and non-blocking, use the
+ * ioctl(FIOSNBIO) call instead, but that is not supported by all devices.
*/
-#$d_statfs_s HAS_STRUCT_STATFS /**/
-
-/* HAS_FSTATVFS:
- * This symbol, if defined, indicates that the fstatvfs routine is
- * available to stat filesystems by file descriptors.
+/* VAL_EAGAIN:
+ * This symbol holds the errno error code set by read() when no data was
+ * present on the non-blocking file descriptor.
*/
-#$d_fstatvfs HAS_FSTATVFS /**/
-
-/* HAS_TELLDIR_PROTO:
- * This symbol, if defined, indicates that the system provides
- * a prototype for the telldir() function. Otherwise, it is up
- * to the program to supply one. A good guess is
- * extern long telldir _((DIR*));
+/* RD_NODATA:
+ * This symbol holds the return code from read() when no data is present
+ * on the non-blocking file descriptor. Be careful! If EOF_NONBLOCK is
+ * not defined, then you can't distinguish between no data and EOF by
+ * issuing a read(). You'll have to find another way to tell for sure!
*/
-#$d_telldirproto HAS_TELLDIR_PROTO /**/
-
-/* HAS_USTAT:
- * This symbol, if defined, indicates that the ustat system call is
- * available to query file system statistics by dev_t.
+/* EOF_NONBLOCK:
+ * This symbol, if defined, indicates to the C program that a read() on
+ * a non-blocking file descriptor will return 0 on EOF, and not the value
+ * held in RD_NODATA (-1 usually, in that case!).
*/
-#$d_ustat HAS_USTAT /**/
+#define VAL_O_NONBLOCK $o_nonblock
+#define VAL_EAGAIN $eagain
+#define RD_NODATA $rd_nodata
+#$d_eofnblk EOF_NONBLOCK
-/* USE_DYNAMIC_LOADING:
- * This symbol, if defined, indicates that dynamic loading of
- * some sort is available.
+/* Netdb_host_t:
+ * This symbol holds the type used for the 1st argument
+ * to gethostbyaddr().
*/
-#$usedl USE_DYNAMIC_LOADING /**/
-
-/* FFLUSH_NULL:
- * This symbol, if defined, tells that fflush(NULL) does flush
- * all pending stdio output.
+/* Netdb_hlen_t:
+ * This symbol holds the type used for the 2nd argument
+ * to gethostbyaddr().
*/
-/* FFLUSH_ALL:
- * This symbol, if defined, tells that to flush
- * all pending stdio output one must loop through all
- * the stdio file handles stored in an array and fflush them.
- * Note that if fflushNULL is defined, fflushall will not
- * even be probed for and will be left undefined.
+/* Netdb_name_t:
+ * This symbol holds the type used for the argument to
+ * gethostbyname().
*/
-#$fflushNULL FFLUSH_NULL /**/
-#$fflushall FFLUSH_ALL /**/
+/* Netdb_net_t:
+ * This symbol holds the type used for the 1st argument to
+ * getnetbyaddr().
+ */
+#define Netdb_host_t $netdb_host_type /**/
+#define Netdb_hlen_t $netdb_hlen_type /**/
+#define Netdb_name_t $netdb_name_type /**/
+#define Netdb_net_t $netdb_net_type /**/
-/* DB_Prefix_t:
- * This symbol contains the type of the prefix structure element
- * in the <db.h> header file. In older versions of DB, it was
- * int, while in newer ones it is u_int32_t.
- */
-/* DB_Hash_t:
- * This symbol contains the type of the prefix structure element
- * in the <db.h> header file. In older versions of DB, it was
- * int, while in newer ones it is size_t.
- */
-#define DB_Hash_t $db_hashtype /**/
-#define DB_Prefix_t $db_prefixtype /**/
-
-/* I_INTTYPES:
- * This symbol, if defined, indicates to the C program that it should
- * include <inttypes.h>.
- */
-#$i_inttypes I_INTTYPES /**/
-
-/* I_MNTENT:
- * This symbol, if defined, indicates that <mntent.h> exists and
- * should be included.
- */
-#$i_mntent I_MNTENT /**/
-
-/* I_NETINET_TCP:
- * This symbol, if defined, indicates to the C program that it should
- * include <netinet/tcp.h>.
- */
-#$i_netinettcp I_NETINET_TCP /**/
-
-/* I_POLL:
- * This symbol, if defined, indicates that <poll.h> exists and
- * should be included.
- */
-#$i_poll I_POLL /**/
-
-/* I_SHADOW:
- * This symbol, if defined, indicates that <shadow.h> exists and
- * should be included.
- */
-#$i_shadow I_SHADOW /**/
-
-/* I_SOCKS:
- * This symbol, if defined, indicates that <socks.h> exists and
- * should be included.
- */
-#$i_socks I_SOCKS /**/
-
-/* I_SYS_MOUNT:
- * This symbol, if defined, indicates that <sys/mount.h> exists and
- * should be included.
- */
-#$i_sysmount I_SYS_MOUNT /**/
-
-/* I_SYS_STATFS:
- * This symbol, if defined, indicates that <sys/statfs.h> exists.
- */
-#$i_sysstatfs I_SYS_STATFS /**/
-
-/* I_SYS_STATVFS:
- * This symbol, if defined, indicates that <sys/statvfs.h> exists and
- * should be included.
- */
-#$i_sysstatvfs I_SYS_STATVFS /**/
-
-/* I_SYS_VFS:
- * This symbol, if defined, indicates that <sys/vfs.h> exists and
- * should be included.
- */
-#$i_sysvfs I_SYS_VFS /**/
-
-/* I_USTAT:
- * This symbol, if defined, indicates that <ustat.h> exists and
- * should be included.
- */
-#$i_ustat I_USTAT /**/
-
-/* HAS_OFF64_T:
- * This symbol will be defined if the C compiler supports off64_t.
- */
-/* HAS_FPOS64_T:
- * This symbol will be defined if the C compiler supports fpos64_t.
- */
-#$d_off64_t HAS_OFF64_T /**/
-#$d_fpos64_t HAS_FPOS64_T /**/
-
-/* PERL_PRIfldbl:
- * This symbol, if defined, contains the string used by stdio to
- * format long doubles (format 'f') for output.
- */
-/* PERL_PRIgldbl:
- * This symbol, if defined, contains the string used by stdio to
- * format long doubles (format 'g') for output.
- */
-#$d_PRIfldbl PERL_PRIfldbl $sPRIfldbl /**/
-#$d_PRIgldbl PERL_PRIgldbl $sPRIgldbl /**/
-
-/* IVTYPE:
- * This symbol defines the C type used for Perl's IV.
+/* IVTYPE:
+ * This symbol defines the C type used for Perl's IV.
*/
/* UVTYPE:
* This symbol defines the C type used for Perl's UV.
/* U64SIZE:
* This symbol contains the sizeof(U64).
*/
+/* NV_PRESERVES_UV:
+ * This symbol, if defined, indicates that a variable of type NVTYPE
+ * can preserve all the bit of a variable of type UVSIZE.
+ */
#define IVTYPE $ivtype /**/
#define UVTYPE $uvtype /**/
#define I8TYPE $i8type /**/
#define I64SIZE $i64size /**/
#define U64SIZE $u64size /**/
#endif
+#$d_nv_preserves_uv NV_PRESERVES_UV
/* IVdf:
* This symbol defines the format string used for printing a Perl IV
#define UVof $uvoformat /**/
#define UVxf $uvxformat /**/
-/* SELECT_MIN_BITS:
- * This symbol holds the minimum number of bits operated by select.
- * That is, if you do select(n, ...), how many bits at least will be
- * cleared in the masks if some activity is detected. Usually this
- * is either n or 32*ceil(n/32), especially many little-endians do
- * the latter. This is only useful if you have select(), naturally.
- */
-#define SELECT_MIN_BITS $selectminbits /**/
-
-/* STARTPERL:
- * This variable contains the string to put in front of a perl
- * script to make sure (one hopes) that it runs with perl and not
- * some shell.
- */
-#define STARTPERL "$startperl" /**/
-
-/* HAS_STDIO_STREAM_ARRAY:
- * This symbol, if defined, tells that there is an array
- * holding the stdio streams.
- */
-/* STDIO_STREAM_ARRAY:
- * This symbol tells the name of the array holding the stdio streams.
- * Usual values include _iob, __iob, and __sF.
+/* Pid_t:
+ * This symbol holds the type used to declare process ids in the kernel.
+ * It can be int, uint, pid_t, etc... It may be necessary to include
+ * <sys/types.h> to get any typedef'ed information.
*/
-#$d_stdio_stream_array HAS_STDIO_STREAM_ARRAY /**/
-#define STDIO_STREAM_ARRAY $stdio_stream_array
+#define Pid_t $pidtype /* PID type */
-/* HAS_STRTOULL:
- * This symbol, if defined, indicates that the strtoull routine is
- * available to convert strings into unsigned long longs.
+/* PRIVLIB:
+ * This symbol contains the name of the private library for this package.
+ * The library is private in the sense that it needn't be in anyone's
+ * execution path, but it should be accessible by the world. The program
+ * should be prepared to do ~ expansion.
*/
-#$d_strtoull HAS_STRTOULL /**/
-
-/* USE_64_BITS:
- * This symbol, if defined, indicates that 64-bit integers should
- * be used when available. If not defined, the native integers
- * will be used (be they 32 or 64 bits).
+/* PRIVLIB_EXP:
+ * This symbol contains the ~name expanded version of PRIVLIB, to be used
+ * in programs that are not prepared to deal with ~ expansion at run-time.
*/
-#ifndef USE_64_BITS
-#$use64bits USE_64_BITS /**/
-#endif
+#define PRIVLIB "$privlib" /**/
+#define PRIVLIB_EXP "$privlibexp" /**/
-/* USE_LARGE_FILES:
- * This symbol, if defined, indicates that large file support
- * should be used when available. The USE_64_BITS symbol will
- * also be turned on if necessary.
+/* PTRSIZE:
+ * This symbol contains the size of a pointer, so that the C preprocessor
+ * can make decisions based on it. It will be sizeof(void *) if
+ * the compiler supports (void *); otherwise it will be
+ * sizeof(char *).
*/
-#ifndef USE_LARGE_FILES
-#$uselargefiles USE_LARGE_FILES /**/
-#endif
+#define PTRSIZE $ptrsize /**/
-/* USE_LONG_DOUBLE:
- * This symbol, if defined, indicates that long doubles should
- * be used when available.
+/* Drand01:
+ * This macro is to be used to generate uniformly distributed
+ * random numbers over the range [0., 1.[. You may have to supply
+ * an 'extern double drand48();' in your program since SunOS 4.1.3
+ * doesn't provide you with anything relevant in it's headers.
+ * See HAS_DRAND48_PROTO.
*/
-#ifndef USE_LONG_DOUBLE
-#$uselongdouble USE_LONG_DOUBLE /**/
-#endif
-
-#ifndef USE_MORE_BITS
-#$usemorebits USE_MORE_BITS /**/
-#endif
-
-/* MULTIPLICITY:
- * This symbol, if defined, indicates that Perl should
- * be built to use multiplicity.
+/* Rand_seed_t:
+ * This symbol defines the type of the argument of the
+ * random seed function.
*/
-#ifndef MULTIPLICITY
-#$usemultiplicity MULTIPLICITY /**/
-#endif
-
-/* USE_PERLIO:
- * This symbol, if defined, indicates that the PerlIO abstraction should
- * be used throughout. If not defined, stdio should be
- * used in a fully backward compatible manner.
+/* seedDrand01:
+ * This symbol defines the macro to be used in seeding the
+ * random number generator (see Drand01).
*/
-#ifndef USE_PERLIO
-#$useperlio USE_PERLIO /**/
-#endif
-
-/* USE_SOCKS:
- * This symbol, if defined, indicates that Perl should
- * be built to use socks.
+/* RANDBITS:
+ * This symbol indicates how many bits are produced by the
+ * function used to generate normalized random numbers.
+ * Values include 15, 16, 31, and 48.
*/
-#ifndef USE_SOCKS
-#$usesocks USE_SOCKS /**/
-#endif
+#define Drand01() $drand01 /**/
+#define Rand_seed_t $randseedtype /**/
+#define seedDrand01(x) $seedfunc((Rand_seed_t)x) /**/
+#define RANDBITS $randbits /**/
-/* PERL_XS_APIVERSION:
- * This variable contains the version of the oldest perl binary
- * compatible with the present perl. perl.c:incpush() and
- * lib/lib.pm will automatically search in $sitearch for older
- * directories across major versions back to xs_apiversion.
- * This is only useful if you have a perl library directory tree
- * structured like the default one.
- * See INSTALL for how this works.
- * The versioned site_perl directory was introduced in 5.005,
- * so that is the lowest possible value.
- * Since this can depend on compile time options (such as
- * bincompat) it is set by Configure. Other non-default sources
- * of potential incompatibility, such as multiplicity, threads,
- * debugging, 64bits, sfio, etc., are not checked for currently,
- * though in principle we could go snooping around in old
- * Config.pm files.
- */
-/* PERL_PM_APIVERSION:
- * This variable contains the version of the oldest perl
- * compatible with the present perl. (That is, pure perl modules
- * written for pm_apiversion will still work for the current
- * version). perl.c:incpush() and lib/lib.pm will automatically
- * search in $sitelib for older directories across major versions
- * back to pm_apiversion. This is only useful if you have a perl
- * library directory tree structured like the default one. The
- * versioned site_perl library was introduced in 5.005, so that's
- * the default setting for this variable. It's hard to imagine
- * it changing before Perl6. It is included here for symmetry
- * with xs_apiveprsion -- the searching algorithms will
- * (presumably) be similar.
- * See the INSTALL file for how this works.
+/* SELECT_MIN_BITS:
+ * This symbol holds the minimum number of bits operated by select.
+ * That is, if you do select(n, ...), how many bits at least will be
+ * cleared in the masks if some activity is detected. Usually this
+ * is either n or 32*ceil(n/32), especially many little-endians do
+ * the latter. This is only useful if you have select(), naturally.
*/
-#define PERL_XS_APIVERSION $xs_apiversion /* Change to string for tuples?*/
-#define PERL_PM_APIVERSION $pm_apiversion /* Change to string for tuples?*/
+#define SELECT_MIN_BITS $selectminbits /**/
-/* HAS_DRAND48_PROTO:
- * This symbol, if defined, indicates that the system provides
- * a prototype for the drand48() function. Otherwise, it is up
- * to the program to supply one. A good guess is
- * extern double drand48 _((void));
+/* Select_fd_set_t:
+ * This symbol holds the type used for the 2nd, 3rd, and 4th
+ * arguments to select. Usually, this is 'fd_set *', if HAS_FD_SET
+ * is defined, and 'int *' otherwise. This is only useful if you
+ * have select(), of course.
*/
-#$d_drand48proto HAS_DRAND48_PROTO /**/
+#define Select_fd_set_t $selecttype /**/
-/* HAS_GETHOST_PROTOS:
- * This symbol, if defined, indicates that <netdb.h> includes
- * prototypes for gethostent(), gethostbyname(), and
- * gethostbyaddr(). Otherwise, it is up to the program to guess
- * them. See netdbtype.U for probing for various Netdb_xxx_t types.
+/* SIG_NAME:
+ * This symbol contains a list of signal names in order of
+ * signal number. This is intended
+ * to be used as a static array initialization, like this:
+ * char *sig_name[] = { SIG_NAME };
+ * The signals in the list are separated with commas, and each signal
+ * is surrounded by double quotes. There is no leading SIG in the signal
+ * name, i.e. SIGQUIT is known as "QUIT".
+ * Gaps in the signal numbers (up to NSIG) are filled in with NUMnn,
+ * etc., where nn is the actual signal number (e.g. NUM37).
+ * The signal number for sig_name[i] is stored in sig_num[i].
+ * The last element is 0 to terminate the list with a NULL. This
+ * corresponds to the 0 at the end of the sig_num list.
*/
-#$d_gethostprotos HAS_GETHOST_PROTOS /**/
-
-/* HAS_GETNET_PROTOS:
- * This symbol, if defined, indicates that <netdb.h> includes
- * prototypes for getnetent(), getnetbyname(), and
- * getnetbyaddr(). Otherwise, it is up to the program to guess
- * them. See netdbtype.U for probing for various Netdb_xxx_t types.
+/* SIG_NUM:
+ * This symbol contains a list of signal numbers, in the same order as the
+ * SIG_NAME list. It is suitable for static array initialization, as in:
+ * int sig_num[] = { SIG_NUM };
+ * The signals in the list are separated with commas, and the indices
+ * within that list and the SIG_NAME list match, so it's easy to compute
+ * the signal name from a number or vice versa at the price of a small
+ * dynamic linear lookup.
+ * Duplicates are allowed, but are moved to the end of the list.
+ * The signal number corresponding to sig_name[i] is sig_number[i].
+ * if (i < NSIG) then sig_number[i] == i.
+ * The last element is 0, corresponding to the 0 at the end of
+ * the sig_name list.
*/
-#$d_getnetprotos HAS_GETNET_PROTOS /**/
+#define SIG_NAME $sig_name_init /**/
+#define SIG_NUM $sig_num_init /**/
-/* HAS_GETPROTO_PROTOS:
- * This symbol, if defined, indicates that <netdb.h> includes
- * prototypes for getprotoent(), getprotobyname(), and
- * getprotobyaddr(). Otherwise, it is up to the program to guess
- * them. See netdbtype.U for probing for various Netdb_xxx_t types.
+/* SITEARCH:
+ * This symbol contains the name of the private library for this package.
+ * The library is private in the sense that it needn't be in anyone's
+ * execution path, but it should be accessible by the world. The program
+ * should be prepared to do ~ expansion.
+ * The standard distribution will put nothing in this directory.
+ * After perl has been installed, users may install their own local
+ * architecture-dependent modules in this directory with
+ * MakeMaker Makefile.PL
+ * or equivalent. See INSTALL for details.
*/
-#$d_getprotoprotos HAS_GETPROTO_PROTOS /**/
-
-/* HAS_GETSERV_PROTOS:
- * This symbol, if defined, indicates that <netdb.h> includes
- * prototypes for getservent(), getservbyname(), and
- * getservbyaddr(). Otherwise, it is up to the program to guess
- * them. See netdbtype.U for probing for various Netdb_xxx_t types.
+/* SITEARCH_EXP:
+ * This symbol contains the ~name expanded version of SITEARCH, to be used
+ * in programs that are not prepared to deal with ~ expansion at run-time.
*/
-#$d_getservprotos HAS_GETSERV_PROTOS /**/
+#define SITEARCH "$sitearch" /**/
+#define SITEARCH_EXP "$sitearchexp" /**/
-/* Netdb_host_t:
- * This symbol holds the type used for the 1st argument
- * to gethostbyaddr().
- */
-/* Netdb_hlen_t:
- * This symbol holds the type used for the 2nd argument
- * to gethostbyaddr().
- */
-/* Netdb_name_t:
- * This symbol holds the type used for the argument to
- * gethostbyname().
- */
-/* Netdb_net_t:
- * This symbol holds the type used for the 1st argument to
- * getnetbyaddr().
+/* SITELIB:
+ * This symbol contains the name of the private library for this package.
+ * The library is private in the sense that it needn't be in anyone's
+ * execution path, but it should be accessible by the world. The program
+ * should be prepared to do ~ expansion.
+ * The standard distribution will put nothing in this directory.
+ * After perl has been installed, users may install their own local
+ * architecture-independent modules in this directory with
+ * MakeMaker Makefile.PL
+ * or equivalent. See INSTALL for details.
*/
-#define Netdb_host_t $netdb_host_type /**/
-#define Netdb_hlen_t $netdb_hlen_type /**/
-#define Netdb_name_t $netdb_name_type /**/
-#define Netdb_net_t $netdb_net_type /**/
-
-/* Select_fd_set_t:
- * This symbol holds the type used for the 2nd, 3rd, and 4th
- * arguments to select. Usually, this is 'fd_set *', if HAS_FD_SET
- * is defined, and 'int *' otherwise. This is only useful if you
- * have select(), of course.
+/* SITELIB_EXP:
+ * This symbol contains the ~name expanded version of SITELIB, to be used
+ * in programs that are not prepared to deal with ~ expansion at run-time.
*/
-#define Select_fd_set_t $selecttype /**/
+#define SITELIB "$sitelib" /**/
+#define SITELIB_EXP "$sitelibexp" /**/
-/* ARCHNAME:
- * This symbol holds a string representing the architecture name.
- * It may be used to construct an architecture-dependant pathname
- * where library files may be held under a private library, for
- * instance.
+/* Size_t:
+ * This symbol holds the type used to declare length parameters
+ * for string functions. It is usually size_t, but may be
+ * unsigned long, int, etc. It may be necessary to include
+ * <sys/types.h> to get any typedef'ed information.
*/
-#define ARCHNAME "$archname" /**/
+#define Size_t $sizetype /* length paramater for string functions */
-/* OLD_PTHREAD_CREATE_JOINABLE:
- * This symbol, if defined, indicates how to create pthread
- * in joinable (aka undetached) state. NOTE: not defined
- * if pthread.h already has defined PTHREAD_CREATE_JOINABLE
- * (the new version of the constant).
- * If defined, known values are PTHREAD_CREATE_UNDETACHED
- * and __UNDETACHED.
+/* SSize_t:
+ * This symbol holds the type used by functions that return
+ * a count of bytes or an error condition. It must be a signed type.
+ * It is usually ssize_t, but may be long or int, etc.
+ * It may be necessary to include <sys/types.h> or <unistd.h>
+ * to get any typedef'ed information.
+ * We will pick a type such that sizeof(SSize_t) == sizeof(Size_t).
*/
-#$d_old_pthread_create_joinable OLD_PTHREAD_CREATE_JOINABLE $old_pthread_create_joinable /**/
+#define SSize_t $ssizetype /* signed count of bytes */
-/* HAS_PTHREAD_YIELD:
- * This symbol, if defined, indicates that the pthread_yield
- * routine is available to yield the execution of the current
- * thread. sched_yield is preferable to pthread_yield.
+/* STARTPERL:
+ * This variable contains the string to put in front of a perl
+ * script to make sure (one hopes) that it runs with perl and not
+ * some shell.
*/
-/* SCHED_YIELD:
- * This symbol defines the way to yield the execution of
- * the current thread. Known ways are sched_yield,
- * pthread_yield, and pthread_yield with NULL.
+#define STARTPERL "$startperl" /**/
+
+/* HAS_STDIO_STREAM_ARRAY:
+ * This symbol, if defined, tells that there is an array
+ * holding the stdio streams.
*/
-/* HAS_SCHED_YIELD:
- * This symbol, if defined, indicates that the sched_yield
- * routine is available to yield the execution of the current
- * thread. sched_yield is preferable to pthread_yield.
+/* STDIO_STREAM_ARRAY:
+ * This symbol tells the name of the array holding the stdio streams.
+ * Usual values include _iob, __iob, and __sF.
*/
-#$d_pthread_yield HAS_PTHREAD_YIELD /**/
-#define SCHED_YIELD $sched_yield /**/
-#$d_sched_yield HAS_SCHED_YIELD /**/
+#$d_stdio_stream_array HAS_STDIO_STREAM_ARRAY /**/
+#define STDIO_STREAM_ARRAY $stdio_stream_array
-/* I_MACH_CTHREADS:
- * This symbol, if defined, indicates to the C program that it should
- * include <mach/cthreads.h>.
+/* Uid_t_f:
+ * This symbol defines the format string used for printing a Uid_t.
*/
-#$i_machcthr I_MACH_CTHREADS /**/
+#define Uid_t_f $uidformat /**/
-/* I_PTHREAD:
- * This symbol, if defined, indicates to the C program that it should
- * include <pthread.h>.
+/* Uid_t_size:
+ * This symbol holds the size of a Uid_t in bytes.
*/
-#$i_pthread I_PTHREAD /**/
+#define Uid_t_size $uidsize /* UID size */
-/* USE_THREADS:
- * This symbol, if defined, indicates that Perl should
- * be built to use threads.
+/* Uid_t:
+ * This symbol holds the type used to declare user ids in the kernel.
+ * It can be int, ushort, uid_t, etc... It may be necessary to include
+ * <sys/types.h> to get any typedef'ed information.
*/
-/* OLD_PTHREADS_API:
- * This symbol, if defined, indicates that Perl should
- * be built to use the old draft POSIX threads API.
+#define Uid_t $uidtype /* UID type */
+
+/* USE_64_BIT_INT:
+ * This symbol, if defined, indicates that 64-bit integers should
+ * be used when available. If not defined, the native integers
+ * will be employed (be they 32 or 64 bits). The minimal possible
+ * 64-bitness is used, just enough to get 64-bit integers into Perl.
+ * This may mean using for example "long longs", while your memory
+ * may still be limited to 2 gigabytes.
*/
-#ifndef USE_TTHREADS
-#$usethreads USE_THREADS /**/
+/* USE_64_BIT_ALL:
+ * This symbol, if defined, indicates that 64-bit integers should
+ * be used when available. If not defined, the native integers
+ * will be used (be they 32 or 64 bits). The maximal possible
+ * 64-bitness is employed: LP64 or ILP64, meaning that you will
+ * be able to use more than 2 gigabytes of memory. This mode is
+ * even more binary incompatible than USE_64_BIT_INT. You may not
+ * be able to run the resulting executable in a 32-bit CPU at all or
+ * you may need at least to reboot your OS to 64-bit mode.
+ */
+#ifndef USE_64_BIT_INT
+#$use64bitint USE_64_BIT_INT /**/
#endif
-#$d_oldpthreads OLD_PTHREADS_API /**/
-/* Time_t:
- * This symbol holds the type returned by time(). It can be long,
- * or time_t on BSD sites (in which case <sys/types.h> should be
- * included).
+#ifndef USE_64_BIT_ALL
+#$use64bitall USE_64_BIT_ALL /**/
+#endif
+
+/* USE_LARGE_FILES:
+ * This symbol, if defined, indicates that large file support
+ * should be used when available.
*/
-#define Time_t $timetype /* Time type */
+#ifndef USE_LARGE_FILES
+#$uselargefiles USE_LARGE_FILES /**/
+#endif
-/* HAS_TIMES:
- * This symbol, if defined, indicates that the times() routine exists.
- * Note that this became obsolete on some systems (SUNOS), which now
- * use getrusage(). It may be necessary to include <sys/times.h>.
+/* USE_LONG_DOUBLE:
+ * This symbol, if defined, indicates that long doubles should
+ * be used when available.
*/
-#$d_times HAS_TIMES /**/
+#ifndef USE_LONG_DOUBLE
+#$uselongdouble USE_LONG_DOUBLE /**/
+#endif
-/* Fpos_t:
- * This symbol holds the type used to declare file positions in libc.
- * It can be fpos_t, long, uint, etc... It may be necessary to include
- * <sys/types.h> to get any typedef'ed information.
+/* USE_MORE_BITS:
+ * This symbol, if defined, indicates that 64-bit interfaces and
+ * long doubles should be used when available.
*/
-#define Fpos_t $fpostype /* File position type */
+#ifndef USE_MORE_BITS
+#$usemorebits USE_MORE_BITS /**/
+#endif
-/* Gid_t_f:
- * This symbol defines the format string used for printing a Gid_t.
+/* MULTIPLICITY:
+ * This symbol, if defined, indicates that Perl should
+ * be built to use multiplicity.
*/
-#define Gid_t_f $gidformat /**/
+#ifndef MULTIPLICITY
+#$usemultiplicity MULTIPLICITY /**/
+#endif
-/* Gid_t_size:
- * This symbol holds the size of a Gid_t in bytes.
+/* USE_PERLIO:
+ * This symbol, if defined, indicates that the PerlIO abstraction should
+ * be used throughout. If not defined, stdio should be
+ * used in a fully backward compatible manner.
*/
-#define Gid_t_size $gidsize /* GID size */
+#ifndef USE_PERLIO
+#$useperlio USE_PERLIO /**/
+#endif
-/* Gid_t:
- * This symbol holds the return type of getgid() and the type of
- * argument to setrgid() and related functions. Typically,
- * it is the type of group ids in the kernel. It can be int, ushort,
- * uid_t, etc... It may be necessary to include <sys/types.h> to get
- * any typedef'ed information.
+/* USE_SOCKS:
+ * This symbol, if defined, indicates that Perl should
+ * be built to use socks.
*/
-#define Gid_t $gidtype /* Type for getgid(), etc... */
+#ifndef USE_SOCKS
+#$usesocks USE_SOCKS /**/
+#endif
-/* Off_t:
- * This symbol holds the type used to declare offsets in the kernel.
- * It can be int, long, off_t, etc... It may be necessary to include
- * <sys/types.h> to get any typedef'ed information.
+/* USE_ITHREADS:
+ * This symbol, if defined, indicates that Perl should be built to
+ * use the interpreter-based threading implementation.
*/
-/* LSEEKSIZE:
- * This symbol holds the number of bytes used by the Off_t.
+/* USE_5005THREADS:
+ * This symbol, if defined, indicates that Perl should be built to
+ * use the 5.005-based threading implementation.
*/
-/* Off_t_size:
- * This symbol holds the number of bytes used by the Off_t.
+/* OLD_PTHREADS_API:
+ * This symbol, if defined, indicates that Perl should
+ * be built to use the old draft POSIX threads API.
*/
-#define Off_t $lseektype /* <offset> type */
-#define LSEEKSIZE $lseeksize /* <offset> size */
-#define Off_t_size $lseeksize /* <offset> size */
+#$use5005threads USE_5005THREADS /**/
+#$useithreads USE_ITHREADS /**/
+#if defined(USE_5005THREADS) && !defined(USE_ITHREADS)
+#define USE_THREADS /* until src is revised*/
+#endif
+#$d_oldpthreads OLD_PTHREADS_API /**/
-/* Mode_t:
- * This symbol holds the type used to declare file modes
- * for systems calls. It is usually mode_t, but may be
- * int or unsigned short. It may be necessary to include <sys/types.h>
- * to get any typedef'ed information.
+/* PERL_VENDORLIB_EXP:
+ * This symbol contains the ~name expanded version of VENDORLIB, to be used
+ * in programs that are not prepared to deal with ~ expansion at run-time.
*/
-#define Mode_t $modetype /* file mode parameter for system calls */
+#$d_vendorlib PERL_VENDORLIB_EXP "$vendorlibexp" /**/
-/* Pid_t:
- * This symbol holds the type used to declare process ids in the kernel.
- * It can be int, uint, pid_t, etc... It may be necessary to include
- * <sys/types.h> to get any typedef'ed information.
+/* VOIDFLAGS:
+ * This symbol indicates how much support of the void type is given by this
+ * compiler. What various bits mean:
+ *
+ * 1 = supports declaration of void
+ * 2 = supports arrays of pointers to functions returning void
+ * 4 = supports comparisons between pointers to void functions and
+ * addresses of void functions
+ * 8 = suports declaration of generic void pointers
+ *
+ * The package designer should define VOIDUSED to indicate the requirements
+ * of the package. This can be done either by #defining VOIDUSED before
+ * including config.h, or by defining defvoidused in Myinit.U. If the
+ * latter approach is taken, only those flags will be tested. If the
+ * level of void support necessary is not present, defines void to int.
*/
-#define Pid_t $pidtype /* PID type */
+#ifndef VOIDUSED
+#define VOIDUSED $defvoidused
+#endif
+#define VOIDFLAGS $voidflags
+#if (VOIDFLAGS & VOIDUSED) != VOIDUSED
+#define void int /* is void to be avoided? */
+#define M_VOID /* Xenix strikes again */
+#endif
-/* Size_t:
- * This symbol holds the type used to declare length parameters
- * for string functions. It is usually size_t, but may be
- * unsigned long, int, etc. It may be necessary to include
- * <sys/types.h> to get any typedef'ed information.
+/* PERL_XS_APIVERSION:
+ * This variable contains the version of the oldest perl binary
+ * compatible with the present perl. perl.c:incpush() and
+ * lib/lib.pm will automatically search in $sitearch for older
+ * directories across major versions back to xs_apiversion.
+ * This is only useful if you have a perl library directory tree
+ * structured like the default one.
+ * See INSTALL for how this works.
+ * The versioned site_perl directory was introduced in 5.005,
+ * so that is the lowest possible value.
+ * Since this can depend on compile time options (such as
+ * bincompat) it is set by Configure. Other non-default sources
+ * of potential incompatibility, such as multiplicity, threads,
+ * debugging, 64bits, sfio, etc., are not checked for currently,
+ * though in principle we could go snooping around in old
+ * Config.pm files.
*/
-#define Size_t $sizetype /* length paramater for string functions */
+/* PERL_PM_APIVERSION:
+ * This variable contains the version of the oldest perl
+ * compatible with the present perl. (That is, pure perl modules
+ * written for pm_apiversion will still work for the current
+ * version). perl.c:incpush() and lib/lib.pm will automatically
+ * search in $sitelib for older directories across major versions
+ * back to pm_apiversion. This is only useful if you have a perl
+ * library directory tree structured like the default one. The
+ * versioned site_perl library was introduced in 5.005, so that's
+ * the default setting for this variable. It's hard to imagine
+ * it changing before Perl6. It is included here for symmetry
+ * with xs_apiveprsion -- the searching algorithms will
+ * (presumably) be similar.
+ * See the INSTALL file for how this works.
+ */
+#define PERL_XS_APIVERSION "$xs_apiversion"
+#define PERL_PM_APIVERSION "$pm_apiversion"
-/* Uid_t_f:
- * This symbol defines the format string used for printing a Uid_t.
+/* HAS_GETFSSTAT:
+ * This symbol, if defined, indicates that the getfsstat routine is
+ * available to stat filesystems in bulk.
*/
-#define Uid_t_f $uidformat /**/
+#$d_getfsstat HAS_GETFSSTAT /**/
-/* Uid_t_size:
- * This symbol holds the size of a Uid_t in bytes.
+/* HAS_LSEEK_PROTO:
+ * This symbol, if defined, indicates that the system provides
+ * a prototype for the lseek() function. Otherwise, it is up
+ * to the program to supply one. A good guess is
+ * extern off_t lseek(int, off_t, int);
*/
-#define Uid_t_size $uidsize /* UID size */
+#$d_lseekproto HAS_LSEEK_PROTO /**/
-/* Uid_t:
- * This symbol holds the type used to declare user ids in the kernel.
- * It can be int, ushort, uid_t, etc... It may be necessary to include
- * <sys/types.h> to get any typedef'ed information.
+/* Sock_size_t:
+ * This symbol holds the type used for the size argument of
+ * various socket calls (just the base type, not the pointer-to).
*/
-#define Uid_t $uidtype /* UID type */
+#define Sock_size_t $socksizetype /**/
#endif
!GROK!THIS!
smail=''
small=''
so='dll'
-sock_size_type='int *'
sockethdr=''
socketlib=''
+socksizetype='int'
sort='sort'
spackage='Perl5'
spitshell=''
uniq='uniq'
uquadtype='unsigned __int64'
use5005threads='undef'
-use64bits='undef'
+use64bitall='undef'
+use64bitint='undef'
usedl='define'
-usefull64bits='undef'
useithreads='undef'
uselargefiles='undef'
uselongdouble='undef'
smail=''
small=''
so='dll'
-sock_size_type='int *'
sockethdr=''
socketlib=''
+socksizetype='int'
sort='sort'
spackage='Perl5'
spitshell=''
uniq='uniq'
uquadtype='unsigned long long'
use5005threads='undef'
-use64bits='undef'
+use64bitall='undef'
+use64bitint='undef'
usedl='define'
-usefull64bits='undef'
useithreads='undef'
uselargefiles='undef'
uselongdouble='undef'
smail=''
small=''
so='dll'
-sock_size_type='int *'
sockethdr=''
socketlib=''
+socksizetype='int'
sort='sort'
spackage='Perl5'
spitshell=''
uniq='uniq'
uquadtype='unsigned __int64'
use5005threads='undef'
-use64bits='undef'
+use64bitall='undef'
+use64bitint='undef'
usedl='define'
-usefull64bits='undef'
-useithreads='undef'
uselargefiles='undef'
uselongdouble='undef'
usemorebits='undef'
/*#define HAS_SCM_RIGHTS /**/
/* Sock_size_t:
- * This symbol holds the type used for the size argument
- * of various socket calls.
+ * This symbol holds the type used for the size argument of
+ * various socket calls (just the base type, not the pointer-to).
*/
-#define Sock_size_t int * /**/
+#define Sock_size_t int /**/
/* HAS_SQRTL:
* This symbol, if defined, indicates that the sqrtl routine is
*/
#define Uid_t uid_t /* UID type */
-/* USE_64_BITS:
- * This symbol, if defined, indicates that 64-bit integers should
- * be used when available. If not defined, the native integers
- * will be employed (be they 32 or 64 bits). The minimal possible
- * 64-bitness is used, just enough to get 64-bit integers into Perl.
- * This may mean using for example "long longs", while your memory
- * may still be limited to 2 gigabytes.
- */
-#ifndef USE_64_BITS
-/*#define USE_64_BITS /**/
-#endif
-
-/* USE_FULL_64_BITS:
- * This variable conditionally defines the USE_FULL_64_BITS symbol,
+/* USE_64_BIT_ALL:
+ * This variable conditionally defines the USE_64_BIT_ALL symbol,
* and indicates that 64-bit integer types should be used
* when available. The maximal possible
* 64-bitness is employed: LP64 or ILP64, meaning that you will
* be able to use more than 2 gigabytes of memory. This mode is
- * even more binary incompatible than USE_64_BITS. You may not
+ * even more binary incompatible than USE_64_BIT_INT. You may not
* be able to run the resulting executable in a 32-bit CPU at all or
* you may need at least to reboot your OS to 64-bit mode.
*/
-#ifndef USE_FULL_64_BITS
-/*#define USE_FULL_64_BITS /**/
+#ifndef USE_64_BIT_ALL
+/*#define USE_64_BIT_ALL /**/
+#endif
+
+/* USE_64_BIT_INT:
+ * This symbol, if defined, indicates that 64-bit integers should
+ * be used when available. If not defined, the native integers
+ * will be employed (be they 32 or 64 bits). The minimal possible
+ * 64-bitness is used, just enough to get 64-bit integers into Perl.
+ * This may mean using for example "long longs", while your memory
+ * may still be limited to 2 gigabytes.
+ */
+#ifndef USE_64_BIT_INT
+/*#define USE_64_BIT_INT /**/
#endif
/* USE_LARGE_FILES:
/*#define HAS_SCM_RIGHTS /**/
/* Sock_size_t:
- * This symbol holds the type used for the size argument
- * of various socket calls.
+ * This symbol holds the type used for the size argument of
+ * various socket calls (just the base type, not the pointer-to).
*/
-#define Sock_size_t int * /**/
+#define Sock_size_t int /**/
/* HAS_SQRTL:
* This symbol, if defined, indicates that the sqrtl routine is
*/
#define Uid_t uid_t /* UID type */
-/* USE_64_BITS:
- * This symbol, if defined, indicates that 64-bit integers should
- * be used when available. If not defined, the native integers
- * will be employed (be they 32 or 64 bits). The minimal possible
- * 64-bitness is used, just enough to get 64-bit integers into Perl.
- * This may mean using for example "long longs", while your memory
- * may still be limited to 2 gigabytes.
- */
-#ifndef USE_64_BITS
-/*#define USE_64_BITS /**/
-#endif
-
-/* USE_FULL_64_BITS:
- * This variable conditionally defines the USE_FULL_64_BITS symbol,
+/* USE_64_BIT_ALL:
+ * This variable conditionally defines the USE_64_BIT_ALL symbol,
* and indicates that 64-bit integer types should be used
* when available. The maximal possible
* 64-bitness is employed: LP64 or ILP64, meaning that you will
* be able to use more than 2 gigabytes of memory. This mode is
- * even more binary incompatible than USE_64_BITS. You may not
+ * even more binary incompatible than USE_64_BIT_ALL. You may not
* be able to run the resulting executable in a 32-bit CPU at all or
* you may need at least to reboot your OS to 64-bit mode.
*/
-#ifndef USE_FULL_64_BITS
-/*#define USE_FULL_64_BITS /**/
+#ifndef USE_64_BIT_ALL
+/*#define USE_64_BIT_ALL /**/
+#endif
+
+/* USE_64_BIT_INT:
+ * This symbol, if defined, indicates that 64-bit integers should
+ * be used when available. If not defined, the native integers
+ * will be employed (be they 32 or 64 bits). The minimal possible
+ * 64-bitness is used, just enough to get 64-bit integers into Perl.
+ * This may mean using for example "long longs", while your memory
+ * may still be limited to 2 gigabytes.
+ */
+#ifndef USE_64_BIT_INT
+/*#define USE_64_BIT_INT /**/
#endif
/* USE_LARGE_FILES:
/*#define HAS_SCM_RIGHTS /**/
/* Sock_size_t:
- * This symbol holds the type used for the size argument
- * of various socket calls.
+ * This symbol holds the type used for the size argument of
+ * various socket calls (just the base type, not the pointer-to).
*/
-#define Sock_size_t int * /**/
+#define Sock_size_t int /**/
/* HAS_SQRTL:
* This symbol, if defined, indicates that the sqrtl routine is
*/
#define Uid_t uid_t /* UID type */
-/* USE_64_BITS:
- * This symbol, if defined, indicates that 64-bit integers should
- * be used when available. If not defined, the native integers
- * will be employed (be they 32 or 64 bits). The minimal possible
- * 64-bitness is used, just enough to get 64-bit integers into Perl.
- * This may mean using for example "long longs", while your memory
- * may still be limited to 2 gigabytes.
- */
-#ifndef USE_64_BITS
-/*#define USE_64_BITS /**/
-#endif
-
-/* USE_FULL_64_BITS:
- * This variable conditionally defines the USE_FULL_64_BITS symbol,
+/* USE_64_BIT_ALL:
+ * This variable conditionally defines the USE_64_BIT_ALL symbol,
* and indicates that 64-bit integer types should be used
* when available. The maximal possible
* 64-bitness is employed: LP64 or ILP64, meaning that you will
* be able to use more than 2 gigabytes of memory. This mode is
- * even more binary incompatible than USE_64_BITS. You may not
+ * even more binary incompatible than USE_64_BIT_INT. You may not
* be able to run the resulting executable in a 32-bit CPU at all or
* you may need at least to reboot your OS to 64-bit mode.
*/
-#ifndef USE_FULL_64_BITS
-/*#define USE_FULL_64_BITS /**/
+#ifndef USE_64_BIT_ALL
+/*#define USE_64_BIT_ALL /**/
+#endif
+
+/* USE_64_BIT_INT:
+ * This symbol, if defined, indicates that 64-bit integers should
+ * be used when available. If not defined, the native integers
+ * will be employed (be they 32 or 64 bits). The minimal possible
+ * 64-bitness is used, just enough to get 64-bit integers into Perl.
+ * This may mean using for example "long longs", while your memory
+ * may still be limited to 2 gigabytes.
+ */
+#ifndef USE_64_BIT_INT
+/*#define USE_64_BIT_INT /**/
#endif
/* USE_LARGE_FILES:
projects / platform / upstream / perl.git / commitdiff