fm10k: update fm10k_slot_warn to use pcie_get_minimum link
authorJacob Keller <jacob.e.keller@intel.com>
Mon, 15 Jun 2015 22:00:55 +0000 (15:00 -0700)
committerJeff Kirsher <jeffrey.t.kirsher@intel.com>
Wed, 16 Sep 2015 00:05:28 +0000 (17:05 -0700)
This is useful in cases where we connect to a slot at Gen3, but the slot
is behind a bus which only connected at Gen2. This generally only
happens when a PCIe switch is in the sequence of devices, and can be
very confusing when you see slow performance with no obvious cause.

I am aware this patch has a few lines that break 80 characters, but
there does not seem to be a readable way to format them to less than 80
characters. Suggestions welcome.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
drivers/net/ethernet/intel/fm10k/fm10k_pci.c

index 8413ab5..2d87c32 100644 (file)
@@ -1705,22 +1705,86 @@ static int fm10k_sw_init(struct fm10k_intfc *interface,
 
 static void fm10k_slot_warn(struct fm10k_intfc *interface)
 {
-       struct device *dev = &interface->pdev->dev;
+       enum pcie_link_width width = PCIE_LNK_WIDTH_UNKNOWN;
+       enum pci_bus_speed speed = PCI_SPEED_UNKNOWN;
        struct fm10k_hw *hw = &interface->hw;
+       int max_gts = 0, expected_gts = 0;
 
-       if (hw->mac.ops.is_slot_appropriate(hw))
+       if (pcie_get_minimum_link(interface->pdev, &speed, &width) ||
+           speed == PCI_SPEED_UNKNOWN || width == PCIE_LNK_WIDTH_UNKNOWN) {
+               dev_warn(&interface->pdev->dev,
+                        "Unable to determine PCI Express bandwidth.\n");
                return;
+       }
+
+       switch (speed) {
+       case PCIE_SPEED_2_5GT:
+               /* 8b/10b encoding reduces max throughput by 20% */
+               max_gts = 2 * width;
+               break;
+       case PCIE_SPEED_5_0GT:
+               /* 8b/10b encoding reduces max throughput by 20% */
+               max_gts = 4 * width;
+               break;
+       case PCIE_SPEED_8_0GT:
+               /* 128b/130b encoding has less than 2% impact on throughput */
+               max_gts = 8 * width;
+               break;
+       default:
+               dev_warn(&interface->pdev->dev,
+                        "Unable to determine PCI Express bandwidth.\n");
+               return;
+       }
+
+       dev_info(&interface->pdev->dev,
+                "PCI Express bandwidth of %dGT/s available\n",
+                max_gts);
+       dev_info(&interface->pdev->dev,
+                "(Speed:%s, Width: x%d, Encoding Loss:%s, Payload:%s)\n",
+                (speed == PCIE_SPEED_8_0GT ? "8.0GT/s" :
+                 speed == PCIE_SPEED_5_0GT ? "5.0GT/s" :
+                 speed == PCIE_SPEED_2_5GT ? "2.5GT/s" :
+                 "Unknown"),
+                hw->bus.width,
+                (speed == PCIE_SPEED_2_5GT ? "20%" :
+                 speed == PCIE_SPEED_5_0GT ? "20%" :
+                 speed == PCIE_SPEED_8_0GT ? "<2%" :
+                 "Unknown"),
+                (hw->bus.payload == fm10k_bus_payload_128 ? "128B" :
+                 hw->bus.payload == fm10k_bus_payload_256 ? "256B" :
+                 hw->bus.payload == fm10k_bus_payload_512 ? "512B" :
+                 "Unknown"));
 
-       dev_warn(dev,
-                "For optimal performance, a %s %s slot is recommended.\n",
-                (hw->bus_caps.width == fm10k_bus_width_pcie_x1 ? "x1" :
-                 hw->bus_caps.width == fm10k_bus_width_pcie_x4 ? "x4" :
-                 "x8"),
-                (hw->bus_caps.speed == fm10k_bus_speed_2500 ? "2.5GT/s" :
-                 hw->bus_caps.speed == fm10k_bus_speed_5000 ? "5.0GT/s" :
-                 "8.0GT/s"));
-       dev_warn(dev,
-                "A slot with more lanes and/or higher speed is suggested.\n");
+       switch (hw->bus_caps.speed) {
+       case fm10k_bus_speed_2500:
+               /* 8b/10b encoding reduces max throughput by 20% */
+               expected_gts = 2 * hw->bus_caps.width;
+               break;
+       case fm10k_bus_speed_5000:
+               /* 8b/10b encoding reduces max throughput by 20% */
+               expected_gts = 4 * hw->bus_caps.width;
+               break;
+       case fm10k_bus_speed_8000:
+               /* 128b/130b encoding has less than 2% impact on throughput */
+               expected_gts = 8 * hw->bus_caps.width;
+               break;
+       default:
+               dev_warn(&interface->pdev->dev,
+                        "Unable to determine expected PCI Express bandwidth.\n");
+               return;
+       }
+
+       if (max_gts < expected_gts) {
+               dev_warn(&interface->pdev->dev,
+                        "This device requires %dGT/s of bandwidth for optimal performance.\n",
+                        expected_gts);
+               dev_warn(&interface->pdev->dev,
+                        "A %sslot with x%d lanes is suggested.\n",
+                        (hw->bus_caps.speed == fm10k_bus_speed_2500 ? "2.5GT/s " :
+                         hw->bus_caps.speed == fm10k_bus_speed_5000 ? "5.0GT/s " :
+                         hw->bus_caps.speed == fm10k_bus_speed_8000 ? "8.0GT/s " : ""),
+                        hw->bus_caps.width);
+       }
 }
 
 /**
@@ -1739,7 +1803,6 @@ static int fm10k_probe(struct pci_dev *pdev,
 {
        struct net_device *netdev;
        struct fm10k_intfc *interface;
-       struct fm10k_hw *hw;
        int err;
 
        err = pci_enable_device_mem(pdev);
@@ -1783,7 +1846,6 @@ static int fm10k_probe(struct pci_dev *pdev,
 
        interface->netdev = netdev;
        interface->pdev = pdev;
-       hw = &interface->hw;
 
        interface->uc_addr = ioremap(pci_resource_start(pdev, 0),
                                     FM10K_UC_ADDR_SIZE);
@@ -1825,21 +1887,6 @@ static int fm10k_probe(struct pci_dev *pdev,
        /* Register PTP interface */
        fm10k_ptp_register(interface);
 
-       /* print bus type/speed/width info */
-       dev_info(&pdev->dev, "(PCI Express:%s Width: %s Payload: %s)\n",
-                (hw->bus.speed == fm10k_bus_speed_8000 ? "8.0GT/s" :
-                 hw->bus.speed == fm10k_bus_speed_5000 ? "5.0GT/s" :
-                 hw->bus.speed == fm10k_bus_speed_2500 ? "2.5GT/s" :
-                 "Unknown"),
-                (hw->bus.width == fm10k_bus_width_pcie_x8 ? "x8" :
-                 hw->bus.width == fm10k_bus_width_pcie_x4 ? "x4" :
-                 hw->bus.width == fm10k_bus_width_pcie_x1 ? "x1" :
-                 "Unknown"),
-                (hw->bus.payload == fm10k_bus_payload_128 ? "128B" :
-                 hw->bus.payload == fm10k_bus_payload_256 ? "256B" :
-                 hw->bus.payload == fm10k_bus_payload_512 ? "512B" :
-                 "Unknown"));
-
        /* print warning for non-optimal configurations */
        fm10k_slot_warn(interface);