extern int intel_mid_pwr_get_lss_id(struct pci_dev *pdev);
extern int get_gpio_by_name(const char *name);
-extern void intel_scu_device_register(struct platform_device *pdev);
extern int __init sfi_parse_mrtc(struct sfi_table_header *table);
extern int __init sfi_parse_mtmr(struct sfi_table_header *table);
extern int sfi_mrtc_num;
char name[SFI_NAME_LEN + 1];
u8 type;
u8 delay;
+ u8 msic;
void *(*get_platform_data)(void *info);
- /* Custom handler for devices */
- void (*device_handler)(struct sfi_device_table_entry *pentry,
- struct devs_id *dev);
};
#define sfi_device(i) \
ioapic = mp_find_ioapic(gsi);
if (ioapic < 0)
- return -1;
+ return -ENODEV;
pin = mp_find_ioapic_pin(ioapic, gsi);
idx = find_irq_entry(ioapic, pin, mp_INT);
if ((flags & IOAPIC_MAP_CHECK) && idx < 0)
- return -1;
+ return -ENODEV;
return mp_map_pin_to_irq(gsi, idx, ioapic, pin, flags, info);
}
unsigned int socketid_shift; /* aka pnode_shift for UV1/2/3 */
unsigned int pnode_mask;
unsigned int gpa_shift;
+ unsigned int gnode_shift;
} uv_cpuid;
int uv_min_hub_revision_id;
break;
case UV4_HUB_PART_NUMBER:
uv_min_hub_revision_id += UV4_HUB_REVISION_BASE - 1;
+ uv_cpuid.gnode_shift = 2; /* min partition is 4 sockets */
break;
}
(1UL << uv_cpuid.gpa_shift) - 1;
node_id.v = uv_read_local_mmr(UVH_NODE_ID);
+ uv_cpuid.gnode_shift = max_t(unsigned int,
+ uv_cpuid.gnode_shift, mn.n_val);
hub_info->gnode_extra =
- (node_id.s.node_id & ~((1 << mn.n_val) - 1)) >> 1;
+ (node_id.s.node_id & ~((1 << uv_cpuid.gnode_shift) - 1)) >> 1;
hub_info->gnode_upper =
((unsigned long)hub_info->gnode_extra << mn.m_val);
index, _min_socket, _max_socket, _min_pnode, _max_pnode);
}
-static void __init decode_uv_systab(void)
+static int __init decode_uv_systab(void)
{
struct uv_systab *st;
int i;
+ if (uv_hub_info->hub_revision < UV4_HUB_REVISION_BASE)
+ return 0; /* No extended UVsystab required */
+
st = uv_systab;
- if ((!st || st->revision < UV_SYSTAB_VERSION_UV4) && !is_uv4_hub())
- return;
- if (st->revision != UV_SYSTAB_VERSION_UV4_LATEST) {
- pr_crit(
+ if ((!st) || (st->revision < UV_SYSTAB_VERSION_UV4_LATEST)) {
+ int rev = st ? st->revision : 0;
+
+ pr_err(
"UV: BIOS UVsystab version(%x) mismatch, expecting(%x)\n",
- st->revision, UV_SYSTAB_VERSION_UV4_LATEST);
- BUG();
+ rev, UV_SYSTAB_VERSION_UV4_LATEST);
+ pr_err(
+ "UV: Cannot support UV operations, switching to generic PC\n");
+ uv_system_type = UV_NONE;
+ return -EINVAL;
}
for (i = 0; st->entry[i].type != UV_SYSTAB_TYPE_UNUSED; i++) {
break;
}
}
+ return 0;
}
/*
map_low_mmrs();
uv_bios_init(); /* get uv_systab for decoding */
- decode_uv_systab();
+ if (decode_uv_systab() < 0)
+ return; /* UVsystab problem, abort UV init */
build_socket_tables();
build_uv_gr_table();
uv_init_hub_info(&hub_info);
# WiFi
obj-$(subst m,y,$(CONFIG_BRCMFMAC_SDIO)) += platform_bcm43xx.o
# IPC Devices
-obj-y += platform_ipc.o
obj-$(subst m,y,$(CONFIG_MFD_INTEL_MSIC)) += platform_msic.o
obj-$(subst m,y,$(CONFIG_SND_MFLD_MACHINE)) += platform_msic_audio.o
obj-$(subst m,y,$(CONFIG_GPIO_MSIC)) += platform_msic_gpio.o
obj-$(subst m,y,$(CONFIG_MFD_INTEL_MSIC)) += platform_msic_ocd.o
obj-$(subst m,y,$(CONFIG_MFD_INTEL_MSIC)) += platform_msic_battery.o
obj-$(subst m,y,$(CONFIG_INTEL_MID_POWER_BUTTON)) += platform_msic_power_btn.o
-obj-$(subst m,y,$(CONFIG_GPIO_INTEL_PMIC)) += platform_pmic_gpio.o
obj-$(subst m,y,$(CONFIG_INTEL_MFLD_THERMAL)) += platform_msic_thermal.o
# SPI Devices
obj-$(subst m,y,$(CONFIG_SPI_SPIDEV)) += platform_mrfld_spidev.o
obj-$(subst m,y,$(CONFIG_GPIO_PCA953X)) += platform_tca6416.o
# MISC Devices
obj-$(subst m,y,$(CONFIG_KEYBOARD_GPIO)) += platform_gpio_keys.o
+obj-$(subst m,y,$(CONFIG_RTC_DRV_CMOS)) += platform_mrfld_rtc.o
obj-$(subst m,y,$(CONFIG_INTEL_MID_WATCHDOG)) += platform_mrfld_wdt.o
{SW_LID, -1, 1, "lid_switch", EV_SW, 0, 20},
{KEY_VOLUMEUP, -1, 1, "vol_up", EV_KEY, 0, 20},
{KEY_VOLUMEDOWN, -1, 1, "vol_down", EV_KEY, 0, 20},
+ {KEY_MUTE, -1, 1, "mute_enable", EV_KEY, 0, 20},
+ {KEY_VOLUMEUP, -1, 1, "volume_up", EV_KEY, 0, 20},
+ {KEY_VOLUMEDOWN, -1, 1, "volume_down", EV_KEY, 0, 20},
{KEY_CAMERA, -1, 1, "camera_full", EV_KEY, 0, 20},
{KEY_CAMERA_FOCUS, -1, 1, "camera_half", EV_KEY, 0, 20},
{SW_KEYPAD_SLIDE, -1, 1, "MagSw1", EV_SW, 0, 20},
+++ /dev/null
-/*
- * platform_ipc.c: IPC platform library file
- *
- * (C) Copyright 2013 Intel Corporation
- * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; version 2
- * of the License.
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/sfi.h>
-#include <linux/gpio.h>
-#include <asm/intel-mid.h>
-#include "platform_ipc.h"
-
-void __init ipc_device_handler(struct sfi_device_table_entry *pentry,
- struct devs_id *dev)
-{
- struct platform_device *pdev;
- void *pdata = NULL;
- static struct resource res __initdata = {
- .name = "IRQ",
- .flags = IORESOURCE_IRQ,
- };
-
- pr_debug("IPC bus, name = %16.16s, irq = 0x%2x\n",
- pentry->name, pentry->irq);
-
- /*
- * We need to call platform init of IPC devices to fill misc_pdata
- * structure. It will be used in msic_init for initialization.
- */
- if (dev != NULL)
- pdata = dev->get_platform_data(pentry);
-
- /*
- * On Medfield the platform device creation is handled by the MSIC
- * MFD driver so we don't need to do it here.
- */
- if (intel_mid_has_msic())
- return;
-
- pdev = platform_device_alloc(pentry->name, 0);
- if (pdev == NULL) {
- pr_err("out of memory for SFI platform device '%s'.\n",
- pentry->name);
- return;
- }
- res.start = pentry->irq;
- platform_device_add_resources(pdev, &res, 1);
-
- pdev->dev.platform_data = pdata;
- intel_scu_device_register(pdev);
-}
-
-static const struct devs_id pmic_audio_dev_id __initconst = {
- .name = "pmic_audio",
- .type = SFI_DEV_TYPE_IPC,
- .delay = 1,
- .device_handler = &ipc_device_handler,
-};
-
-sfi_device(pmic_audio_dev_id);
+++ /dev/null
-/*
- * platform_ipc.h: IPC platform library header file
- *
- * (C) Copyright 2013 Intel Corporation
- * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; version 2
- * of the License.
- */
-#ifndef _PLATFORM_IPC_H_
-#define _PLATFORM_IPC_H_
-
-void __init
-ipc_device_handler(struct sfi_device_table_entry *pentry, struct devs_id *dev);
-
-#endif
--- /dev/null
+/*
+ * Intel Merrifield legacy RTC initialization file
+ *
+ * (C) Copyright 2017 Intel Corporation
+ *
+ * Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ */
+
+#include <linux/init.h>
+
+#include <asm/hw_irq.h>
+#include <asm/intel-mid.h>
+#include <asm/io_apic.h>
+#include <asm/time.h>
+#include <asm/x86_init.h>
+
+static int __init mrfld_legacy_rtc_alloc_irq(void)
+{
+ struct irq_alloc_info info;
+ int ret;
+
+ if (!x86_platform.legacy.rtc)
+ return -ENODEV;
+
+ ioapic_set_alloc_attr(&info, NUMA_NO_NODE, 1, 0);
+ ret = mp_map_gsi_to_irq(RTC_IRQ, IOAPIC_MAP_ALLOC, &info);
+ if (ret < 0) {
+ pr_info("Failed to allocate RTC interrupt. Disabling RTC\n");
+ x86_platform.legacy.rtc = 0;
+ return ret;
+ }
+
+ return 0;
+}
+
+static int __init mrfld_legacy_rtc_init(void)
+{
+ if (intel_mid_identify_cpu() != INTEL_MID_CPU_CHIP_TANGIER)
+ return -ENODEV;
+
+ return mrfld_legacy_rtc_alloc_irq();
+}
+arch_initcall(mrfld_legacy_rtc_init);
static int tangier_probe(struct platform_device *pdev)
{
- int gsi;
struct irq_alloc_info info;
struct intel_mid_wdt_pdata *pdata = pdev->dev.platform_data;
+ int gsi, irq;
if (!pdata)
return -EINVAL;
/* IOAPIC builds identity mapping between GSI and IRQ on MID */
gsi = pdata->irq;
ioapic_set_alloc_attr(&info, cpu_to_node(0), 1, 0);
- if (mp_map_gsi_to_irq(gsi, IOAPIC_MAP_ALLOC, &info) <= 0) {
- dev_warn(&pdev->dev, "cannot find interrupt %d in ioapic\n",
- gsi);
- return -EINVAL;
+ irq = mp_map_gsi_to_irq(gsi, IOAPIC_MAP_ALLOC, &info);
+ if (irq < 0) {
+ dev_warn(&pdev->dev, "cannot find interrupt %d in ioapic\n", gsi);
+ return irq;
}
return 0;
return 0;
}
-rootfs_initcall(register_mid_wdt);
+arch_initcall(register_mid_wdt);
#include <asm/intel-mid.h>
#include "platform_msic.h"
-#include "platform_ipc.h"
static void *msic_audio_platform_data(void *info)
{
.name = "msic_audio",
.type = SFI_DEV_TYPE_IPC,
.delay = 1,
+ .msic = 1,
.get_platform_data = &msic_audio_platform_data,
- .device_handler = &ipc_device_handler,
};
sfi_device(msic_audio_dev_id);
#include <asm/intel-mid.h>
#include "platform_msic.h"
-#include "platform_ipc.h"
static void __init *msic_battery_platform_data(void *info)
{
.name = "msic_battery",
.type = SFI_DEV_TYPE_IPC,
.delay = 1,
+ .msic = 1,
.get_platform_data = &msic_battery_platform_data,
- .device_handler = &ipc_device_handler,
};
sfi_device(msic_battery_dev_id);
#include <asm/intel-mid.h>
#include "platform_msic.h"
-#include "platform_ipc.h"
static void __init *msic_gpio_platform_data(void *info)
{
.name = "msic_gpio",
.type = SFI_DEV_TYPE_IPC,
.delay = 1,
+ .msic = 1,
.get_platform_data = &msic_gpio_platform_data,
- .device_handler = &ipc_device_handler,
};
sfi_device(msic_gpio_dev_id);
#include <asm/intel-mid.h>
#include "platform_msic.h"
-#include "platform_ipc.h"
static void __init *msic_ocd_platform_data(void *info)
{
.name = "msic_ocd",
.type = SFI_DEV_TYPE_IPC,
.delay = 1,
+ .msic = 1,
.get_platform_data = &msic_ocd_platform_data,
- .device_handler = &ipc_device_handler,
};
sfi_device(msic_ocd_dev_id);
#include <asm/intel-mid.h>
#include "platform_msic.h"
-#include "platform_ipc.h"
static void __init *msic_power_btn_platform_data(void *info)
{
.name = "msic_power_btn",
.type = SFI_DEV_TYPE_IPC,
.delay = 1,
+ .msic = 1,
.get_platform_data = &msic_power_btn_platform_data,
- .device_handler = &ipc_device_handler,
};
sfi_device(msic_power_btn_dev_id);
#include <asm/intel-mid.h>
#include "platform_msic.h"
-#include "platform_ipc.h"
static void __init *msic_thermal_platform_data(void *info)
{
.name = "msic_thermal",
.type = SFI_DEV_TYPE_IPC,
.delay = 1,
+ .msic = 1,
.get_platform_data = &msic_thermal_platform_data,
- .device_handler = &ipc_device_handler,
};
sfi_device(msic_thermal_dev_id);
+++ /dev/null
-/*
- * platform_pmic_gpio.c: PMIC GPIO platform data initialization file
- *
- * (C) Copyright 2013 Intel Corporation
- * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; version 2
- * of the License.
- */
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/scatterlist.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/sfi.h>
-#include <linux/intel_pmic_gpio.h>
-#include <asm/intel-mid.h>
-
-#include "platform_ipc.h"
-
-static void __init *pmic_gpio_platform_data(void *info)
-{
- static struct intel_pmic_gpio_platform_data pmic_gpio_pdata;
- int gpio_base = get_gpio_by_name("pmic_gpio_base");
-
- if (gpio_base < 0)
- gpio_base = 64;
- pmic_gpio_pdata.gpio_base = gpio_base;
- pmic_gpio_pdata.irq_base = gpio_base + INTEL_MID_IRQ_OFFSET;
- pmic_gpio_pdata.gpiointr = 0xffffeff8;
-
- return &pmic_gpio_pdata;
-}
-
-static const struct devs_id pmic_gpio_spi_dev_id __initconst = {
- .name = "pmic_gpio",
- .type = SFI_DEV_TYPE_SPI,
- .delay = 1,
- .get_platform_data = &pmic_gpio_platform_data,
-};
-
-static const struct devs_id pmic_gpio_ipc_dev_id __initconst = {
- .name = "pmic_gpio",
- .type = SFI_DEV_TYPE_IPC,
- .delay = 1,
- .get_platform_data = &pmic_gpio_platform_data,
- .device_handler = &ipc_device_handler
-};
-
-sfi_device(pmic_gpio_spi_dev_id);
-sfi_device(pmic_gpio_ipc_dev_id);
static void __init tangier_arch_setup(void)
{
x86_platform.calibrate_tsc = tangier_calibrate_tsc;
+ x86_platform.legacy.rtc = 1;
}
/* tangier arch ops */
#include <linux/interrupt.h>
#include <linux/scatterlist.h>
#include <linux/sfi.h>
-#include <linux/intel_pmic_gpio.h>
#include <linux/spi/spi.h>
#include <linux/i2c.h>
#include <linux/skbuff.h>
return -EINVAL;
}
-void __init intel_scu_device_register(struct platform_device *pdev)
+static void __init intel_scu_ipc_device_register(struct platform_device *pdev)
{
if (ipc_next_dev == MAX_IPCDEVS)
pr_err("too many SCU IPC devices");
pr_debug("IPC bus, name = %16.16s, irq = 0x%2x\n",
pentry->name, pentry->irq);
+
+ /*
+ * We need to call platform init of IPC devices to fill misc_pdata
+ * structure. It will be used in msic_init for initialization.
+ */
pdata = intel_mid_sfi_get_pdata(dev, pentry);
if (IS_ERR(pdata))
return;
+ /*
+ * On Medfield the platform device creation is handled by the MSIC
+ * MFD driver so we don't need to do it here.
+ */
+ if (dev->msic && intel_mid_has_msic())
+ return;
+
pdev = platform_device_alloc(pentry->name, 0);
if (pdev == NULL) {
pr_err("out of memory for SFI platform device '%s'.\n",
install_irq_resource(pdev, pentry->irq);
pdev->dev.platform_data = pdata;
- platform_device_add(pdev);
+ if (dev->delay)
+ intel_scu_ipc_device_register(pdev);
+ else
+ platform_device_add(pdev);
}
static void __init sfi_handle_spi_dev(struct sfi_device_table_entry *pentry,
if (!dev)
continue;
- if (dev->device_handler) {
- dev->device_handler(pentry, dev);
- } else {
- switch (pentry->type) {
- case SFI_DEV_TYPE_IPC:
- sfi_handle_ipc_dev(pentry, dev);
- break;
- case SFI_DEV_TYPE_SPI:
- sfi_handle_spi_dev(pentry, dev);
- break;
- case SFI_DEV_TYPE_I2C:
- sfi_handle_i2c_dev(pentry, dev);
- break;
- case SFI_DEV_TYPE_SD:
- sfi_handle_sd_dev(pentry, dev);
- break;
- case SFI_DEV_TYPE_UART:
- case SFI_DEV_TYPE_HSI:
- default:
- break;
- }
+ switch (pentry->type) {
+ case SFI_DEV_TYPE_IPC:
+ sfi_handle_ipc_dev(pentry, dev);
+ break;
+ case SFI_DEV_TYPE_SPI:
+ sfi_handle_spi_dev(pentry, dev);
+ break;
+ case SFI_DEV_TYPE_I2C:
+ sfi_handle_i2c_dev(pentry, dev);
+ break;
+ case SFI_DEV_TYPE_SD:
+ sfi_handle_sd_dev(pentry, dev);
+ break;
+ case SFI_DEV_TYPE_UART:
+ case SFI_DEV_TYPE_HSI:
+ default:
+ break;
}
}
return 0;
low level access for debug work and updating the firmware. Say
N unless you will be doing this on an Intel MID platform.
-config GPIO_INTEL_PMIC
- bool "Intel PMIC GPIO support"
- depends on INTEL_SCU_IPC && GPIOLIB
- ---help---
- Say Y here to support GPIO via the SCU IPC interface
- on Intel MID platforms.
-
config INTEL_MID_POWER_BUTTON
tristate "power button driver for Intel MID platforms"
depends on INTEL_SCU_IPC && INPUT
obj-$(CONFIG_INTEL_SCU_IPC_UTIL) += intel_scu_ipcutil.o
obj-$(CONFIG_INTEL_MFLD_THERMAL) += intel_mid_thermal.o
obj-$(CONFIG_INTEL_IPS) += intel_ips.o
-obj-$(CONFIG_GPIO_INTEL_PMIC) += intel_pmic_gpio.o
obj-$(CONFIG_XO1_RFKILL) += xo1-rfkill.o
obj-$(CONFIG_XO15_EBOOK) += xo15-ebook.o
obj-$(CONFIG_IBM_RTL) += ibm_rtl.o
+++ /dev/null
-/* Moorestown PMIC GPIO (access through IPC) driver
- * Copyright (c) 2008 - 2009, Intel Corporation.
- *
- * Author: Alek Du <alek.du@intel.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-/* Supports:
- * Moorestown platform PMIC chip
- */
-
-#define pr_fmt(fmt) "%s: " fmt, __func__
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/delay.h>
-#include <linux/stddef.h>
-#include <linux/slab.h>
-#include <linux/ioport.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/gpio/driver.h>
-#include <asm/intel_scu_ipc.h>
-#include <linux/device.h>
-#include <linux/intel_pmic_gpio.h>
-#include <linux/platform_device.h>
-
-#define DRIVER_NAME "pmic_gpio"
-
-/* register offset that IPC driver should use
- * 8 GPIO + 8 GPOSW (6 controllable) + 8GPO
- */
-enum pmic_gpio_register {
- GPIO0 = 0xE0,
- GPIO7 = 0xE7,
- GPIOINT = 0xE8,
- GPOSWCTL0 = 0xEC,
- GPOSWCTL5 = 0xF1,
- GPO = 0xF4,
-};
-
-/* bits definition for GPIO & GPOSW */
-#define GPIO_DRV 0x01
-#define GPIO_DIR 0x02
-#define GPIO_DIN 0x04
-#define GPIO_DOU 0x08
-#define GPIO_INTCTL 0x30
-#define GPIO_DBC 0xc0
-
-#define GPOSW_DRV 0x01
-#define GPOSW_DOU 0x08
-#define GPOSW_RDRV 0x30
-
-#define GPIO_UPDATE_TYPE 0x80000000
-
-#define NUM_GPIO 24
-
-struct pmic_gpio {
- struct mutex buslock;
- struct gpio_chip chip;
- void *gpiointr;
- int irq;
- unsigned irq_base;
- unsigned int update_type;
- u32 trigger_type;
-};
-
-static void pmic_program_irqtype(int gpio, int type)
-{
- if (type & IRQ_TYPE_EDGE_RISING)
- intel_scu_ipc_update_register(GPIO0 + gpio, 0x20, 0x20);
- else
- intel_scu_ipc_update_register(GPIO0 + gpio, 0x00, 0x20);
-
- if (type & IRQ_TYPE_EDGE_FALLING)
- intel_scu_ipc_update_register(GPIO0 + gpio, 0x10, 0x10);
- else
- intel_scu_ipc_update_register(GPIO0 + gpio, 0x00, 0x10);
-};
-
-static int pmic_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
-{
- if (offset >= 8) {
- pr_err("only pin 0-7 support input\n");
- return -1;/* we only have 8 GPIO can use as input */
- }
- return intel_scu_ipc_update_register(GPIO0 + offset,
- GPIO_DIR, GPIO_DIR);
-}
-
-static int pmic_gpio_direction_output(struct gpio_chip *chip,
- unsigned offset, int value)
-{
- int rc = 0;
-
- if (offset < 8)/* it is GPIO */
- rc = intel_scu_ipc_update_register(GPIO0 + offset,
- GPIO_DRV | (value ? GPIO_DOU : 0),
- GPIO_DRV | GPIO_DOU | GPIO_DIR);
- else if (offset < 16)/* it is GPOSW */
- rc = intel_scu_ipc_update_register(GPOSWCTL0 + offset - 8,
- GPOSW_DRV | (value ? GPOSW_DOU : 0),
- GPOSW_DRV | GPOSW_DOU | GPOSW_RDRV);
- else if (offset > 15 && offset < 24)/* it is GPO */
- rc = intel_scu_ipc_update_register(GPO,
- value ? 1 << (offset - 16) : 0,
- 1 << (offset - 16));
- else {
- pr_err("invalid PMIC GPIO pin %d!\n", offset);
- WARN_ON(1);
- }
-
- return rc;
-}
-
-static int pmic_gpio_get(struct gpio_chip *chip, unsigned offset)
-{
- u8 r;
- int ret;
-
- /* we only have 8 GPIO pins we can use as input */
- if (offset >= 8)
- return -EOPNOTSUPP;
- ret = intel_scu_ipc_ioread8(GPIO0 + offset, &r);
- if (ret < 0)
- return ret;
- return r & GPIO_DIN;
-}
-
-static void pmic_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
-{
- if (offset < 8)/* it is GPIO */
- intel_scu_ipc_update_register(GPIO0 + offset,
- GPIO_DRV | (value ? GPIO_DOU : 0),
- GPIO_DRV | GPIO_DOU);
- else if (offset < 16)/* it is GPOSW */
- intel_scu_ipc_update_register(GPOSWCTL0 + offset - 8,
- GPOSW_DRV | (value ? GPOSW_DOU : 0),
- GPOSW_DRV | GPOSW_DOU | GPOSW_RDRV);
- else if (offset > 15 && offset < 24) /* it is GPO */
- intel_scu_ipc_update_register(GPO,
- value ? 1 << (offset - 16) : 0,
- 1 << (offset - 16));
-}
-
-/*
- * This is called from genirq with pg->buslock locked and
- * irq_desc->lock held. We can not access the scu bus here, so we
- * store the change and update in the bus_sync_unlock() function below
- */
-static int pmic_irq_type(struct irq_data *data, unsigned type)
-{
- struct pmic_gpio *pg = irq_data_get_irq_chip_data(data);
- u32 gpio = data->irq - pg->irq_base;
-
- if (gpio >= pg->chip.ngpio)
- return -EINVAL;
-
- pg->trigger_type = type;
- pg->update_type = gpio | GPIO_UPDATE_TYPE;
- return 0;
-}
-
-static int pmic_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
-{
- struct pmic_gpio *pg = gpiochip_get_data(chip);
-
- return pg->irq_base + offset;
-}
-
-static void pmic_bus_lock(struct irq_data *data)
-{
- struct pmic_gpio *pg = irq_data_get_irq_chip_data(data);
-
- mutex_lock(&pg->buslock);
-}
-
-static void pmic_bus_sync_unlock(struct irq_data *data)
-{
- struct pmic_gpio *pg = irq_data_get_irq_chip_data(data);
-
- if (pg->update_type) {
- unsigned int gpio = pg->update_type & ~GPIO_UPDATE_TYPE;
-
- pmic_program_irqtype(gpio, pg->trigger_type);
- pg->update_type = 0;
- }
- mutex_unlock(&pg->buslock);
-}
-
-/* the gpiointr register is read-clear, so just do nothing. */
-static void pmic_irq_unmask(struct irq_data *data) { }
-
-static void pmic_irq_mask(struct irq_data *data) { }
-
-static struct irq_chip pmic_irqchip = {
- .name = "PMIC-GPIO",
- .irq_mask = pmic_irq_mask,
- .irq_unmask = pmic_irq_unmask,
- .irq_set_type = pmic_irq_type,
- .irq_bus_lock = pmic_bus_lock,
- .irq_bus_sync_unlock = pmic_bus_sync_unlock,
-};
-
-static irqreturn_t pmic_irq_handler(int irq, void *data)
-{
- struct pmic_gpio *pg = data;
- u8 intsts = *((u8 *)pg->gpiointr + 4);
- int gpio;
- irqreturn_t ret = IRQ_NONE;
-
- for (gpio = 0; gpio < 8; gpio++) {
- if (intsts & (1 << gpio)) {
- pr_debug("pmic pin %d triggered\n", gpio);
- generic_handle_irq(pg->irq_base + gpio);
- ret = IRQ_HANDLED;
- }
- }
- return ret;
-}
-
-static int platform_pmic_gpio_probe(struct platform_device *pdev)
-{
- struct device *dev = &pdev->dev;
- int irq = platform_get_irq(pdev, 0);
- struct intel_pmic_gpio_platform_data *pdata = dev->platform_data;
-
- struct pmic_gpio *pg;
- int retval;
- int i;
-
- if (irq < 0) {
- dev_dbg(dev, "no IRQ line\n");
- return -EINVAL;
- }
-
- if (!pdata || !pdata->gpio_base || !pdata->irq_base) {
- dev_dbg(dev, "incorrect or missing platform data\n");
- return -EINVAL;
- }
-
- pg = kzalloc(sizeof(*pg), GFP_KERNEL);
- if (!pg)
- return -ENOMEM;
-
- dev_set_drvdata(dev, pg);
-
- pg->irq = irq;
- /* setting up SRAM mapping for GPIOINT register */
- pg->gpiointr = ioremap_nocache(pdata->gpiointr, 8);
- if (!pg->gpiointr) {
- pr_err("Can not map GPIOINT\n");
- retval = -EINVAL;
- goto err2;
- }
- pg->irq_base = pdata->irq_base;
- pg->chip.label = "intel_pmic";
- pg->chip.direction_input = pmic_gpio_direction_input;
- pg->chip.direction_output = pmic_gpio_direction_output;
- pg->chip.get = pmic_gpio_get;
- pg->chip.set = pmic_gpio_set;
- pg->chip.to_irq = pmic_gpio_to_irq;
- pg->chip.base = pdata->gpio_base;
- pg->chip.ngpio = NUM_GPIO;
- pg->chip.can_sleep = 1;
- pg->chip.parent = dev;
-
- mutex_init(&pg->buslock);
-
- pg->chip.parent = dev;
- retval = gpiochip_add_data(&pg->chip, pg);
- if (retval) {
- pr_err("Can not add pmic gpio chip\n");
- goto err;
- }
-
- retval = request_irq(pg->irq, pmic_irq_handler, 0, "pmic", pg);
- if (retval) {
- pr_warn("Interrupt request failed\n");
- goto fail_request_irq;
- }
-
- for (i = 0; i < 8; i++) {
- irq_set_chip_and_handler_name(i + pg->irq_base,
- &pmic_irqchip,
- handle_simple_irq,
- "demux");
- irq_set_chip_data(i + pg->irq_base, pg);
- }
- return 0;
-
-fail_request_irq:
- gpiochip_remove(&pg->chip);
-err:
- iounmap(pg->gpiointr);
-err2:
- kfree(pg);
- return retval;
-}
-
-/* at the same time, register a platform driver
- * this supports the sfi 0.81 fw */
-static struct platform_driver platform_pmic_gpio_driver = {
- .driver = {
- .name = DRIVER_NAME,
- },
- .probe = platform_pmic_gpio_probe,
-};
-
-static int __init platform_pmic_gpio_init(void)
-{
- return platform_driver_register(&platform_pmic_gpio_driver);
-}
-subsys_initcall(platform_pmic_gpio_init);
+++ /dev/null
-#ifndef LINUX_INTEL_PMIC_H
-#define LINUX_INTEL_PMIC_H
-
-struct intel_pmic_gpio_platform_data {
- /* the first IRQ of the chip */
- unsigned irq_base;
- /* number assigned to the first GPIO */
- unsigned gpio_base;
- /* sram address for gpiointr register, the langwell chip will map
- * the PMIC spi GPIO expander's GPIOINTR register in sram.
- */
- unsigned gpiointr;
-};
-
-#endif
projects / platform / kernel / linux-exynos.git / commitdiff