ARM: renesas: condor: switch eMMC bus to 1V8

The eMMC card has two supplies, VCC and VCCQ. The VCC supplies the NAND
array and the VCCQ supplies the bus. On Condor, the VCC is connected to
3.3V rail, while the VCCQ is connected to 1.8V rail. Adjust the pinmux
to match the bus, which is always operating in 1.8V mode.

Based on Linux commit 69efe4bbeda50745 ("arm64: dts: renesas: condor:
Switch eMMC bus to 1V8") from Wolfram Sang

Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>

diff --git a/arch/arm/dts/r8a77980-condor.dts b/arch/arm/dts/r8a77980-condor.dts
index 3dde028e22a6d9c9f4ba6c691d1b507f56f37cde..f0a0a51d73c051163da67cc806f1e3e7d0869355 100644 (file)
--- a/arch/arm/dts/r8a77980-condor.dts
+++ b/arch/arm/dts/r8a77980-condor.dts
@@ -212,7 +212,7 @@
 
 &mmc0 {
        pinctrl-0 = <&mmc_pins>;
-       pinctrl-1 = <&mmc_pins_uhs>;
+       pinctrl-1 = <&mmc_pins>;
        pinctrl-names = "default", "state_uhs";
 
        vmmc-supply = <&d3_3v>;
@@ -253,12 +253,6 @@
        };
 
        mmc_pins: mmc {
-               groups = "mmc_data8", "mmc_ctrl", "mmc_ds";
-               function = "mmc";
-               power-source = <3300>;
-       };
-
-       mmc_pins_uhs: mmc_uhs {
                groups = "mmc_data8", "mmc_ctrl", "mmc_ds";
                function = "mmc";
                power-source = <1800>;