blackfin: bf60x: add wakeup source select

Support select the wakeup source for power management on bf60x.

Signed-off-by: Steven Miao <realmz6@gmail.com>
Signed-off-by: Bob Liu <lliubbo@gmail.com>

diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index 4e48e72..383e7ec 100644 (file)
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -1256,7 +1256,7 @@ config ARCH_SUSPEND_POSSIBLE
 
 choice
        prompt "Standby Power Saving Mode"
-       depends on PM
+       depends on PM && !BF60x
        default PM_BFIN_SLEEP_DEEPER
 config  PM_BFIN_SLEEP_DEEPER
        bool "Sleep Deeper"
@@ -1311,6 +1311,118 @@ config PM_BFIN_WAKE_GP
          On ADSP-BF549 this option enables the the same functionality on the
          /MRXON pin also PH7.
 
+config PM_BFIN_WAKE_PA15
+       bool "Allow Wake-Up from PA15"
+       depends on PM && BF60x
+       default n
+       help
+         Enable PA15 Wake-Up
+
+config PM_BFIN_WAKE_PA15_POL
+       int "Wake-up priority"
+       depends on PM_BFIN_WAKE_PA15
+       default 0
+       help
+         Wake-Up priority 0(low) 1(high)
+
+config PM_BFIN_WAKE_PB15
+       bool "Allow Wake-Up from PB15"
+       depends on PM && BF60x
+       default n
+       help
+         Enable PB15 Wake-Up
+
+config PM_BFIN_WAKE_PB15_POL
+       int "Wake-up priority"
+       depends on PM_BFIN_WAKE_PB15
+       default 0
+       help
+         Wake-Up priority 0(low) 1(high)
+
+config PM_BFIN_WAKE_PC15
+       bool "Allow Wake-Up from PC15"
+       depends on PM && BF60x
+       default n
+       help
+         Enable PC15 Wake-Up
+
+config PM_BFIN_WAKE_PC15_POL
+       int "Wake-up priority"
+       depends on PM_BFIN_WAKE_PC15
+       default 0
+       help
+         Wake-Up priority 0(low) 1(high)
+
+config PM_BFIN_WAKE_PD06
+       bool "Allow Wake-Up from PD06(ETH0_PHYINT)"
+       depends on PM && BF60x
+       default n
+       help
+         Enable PD06(ETH0_PHYINT) Wake-up
+
+config PM_BFIN_WAKE_PD06_POL
+       int "Wake-up priority"
+       depends on PM_BFIN_WAKE_PD06
+       default 0
+       help
+         Wake-Up priority 0(low) 1(high)
+
+config PM_BFIN_WAKE_PE12
+       bool "Allow Wake-Up from PE12(ETH1_PHYINT, PUSH BUTTON)"
+       depends on PM && BF60x
+       default n
+       help
+         Enable PE12(ETH1_PHYINT, PUSH BUTTON) Wake-up
+
+config PM_BFIN_WAKE_PE12_POL
+       int "Wake-up priority"
+       depends on PM_BFIN_WAKE_PE12
+       default 0
+       help
+         Wake-Up priority 0(low) 1(high)
+
+config PM_BFIN_WAKE_PG04
+       bool "Allow Wake-Up from PG04(CAN0_RX)"
+       depends on PM && BF60x
+       default n
+       help
+         Enable PG04(CAN0_RX) Wake-up
+
+config PM_BFIN_WAKE_PG04_POL
+       int "Wake-up priority"
+       depends on PM_BFIN_WAKE_PG04
+       default 0
+       help
+         Wake-Up priority 0(low) 1(high)
+
+config PM_BFIN_WAKE_PG13
+       bool "Allow Wake-Up from PG13"
+       depends on PM && BF60x
+       default n
+       help
+         Enable PG13 Wake-Up
+
+config PM_BFIN_WAKE_PG13_POL
+       int "Wake-up priority"
+       depends on PM_BFIN_WAKE_PG13
+       default 0
+       help
+         Wake-Up priority 0(low) 1(high)
+
+config PM_BFIN_WAKE_USB
+       bool "Allow Wake-Up from (USB)"
+       depends on PM && BF60x
+       default n
+       help
+         Enable (USB) Wake-up
+
+config PM_BFIN_WAKE_USB_POL
+       int "Wake-up priority"
+       depends on PM_BFIN_WAKE_USB
+       default 0
+       help
+         Wake-Up priority 0(low) 1(high)
+
 endmenu
 
 menu "CPU Frequency scaling"

diff --git a/arch/blackfin/configs/BF609-EZKIT_defconfig b/arch/blackfin/configs/BF609-EZKIT_defconfig
index 0864f7a..be9526b 100644 (file)
--- a/arch/blackfin/configs/BF609-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF609-EZKIT_defconfig
@@ -33,7 +33,8 @@ CONFIG_CPLB_SWITCH_TAB_L1=y
 CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
 CONFIG_BINFMT_FLAT=y
 CONFIG_BINFMT_ZFLAT=y
-# CONFIG_SUSPEND is not set
+CONFIG_PM_BFIN_WAKE_PE12=y
+CONFIG_PM_BFIN_WAKE_PE12_POL=1
 CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_GOV_POWERSAVE=y
 CONFIG_CPU_FREQ_GOV_ONDEMAND=y
@@ -119,7 +120,7 @@ CONFIG_SND_SOC_BFIN_EVAL_ADAU1X61=m
 CONFIG_SND_SOC_ALL_CODECS=m
 CONFIG_USB=y
 CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_BLACKFIN=y
+CONFIG_USB_MUSB_BLACKFIN=m
 CONFIG_USB_STORAGE=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_MUSB_HDRC=y

diff --git a/arch/blackfin/include/asm/dpmc.h b/arch/blackfin/include/asm/dpmc.h
index b47399c..528f476 100644 (file)
--- a/arch/blackfin/include/asm/dpmc.h
+++ b/arch/blackfin/include/asm/dpmc.h
@@ -729,6 +729,16 @@
 #define VLEV_130               0x00F0  /* VLEV = 1.30 V (-5% - +10% Accuracy) */
 #endif
 
+#ifdef CONFIG_BF60x
+#define PA15WE                 0x00000001 /* Allow Wake-Up from PA15 */
+#define PB15WE                 0x00000002 /* Allow Wake-Up from PB15 */
+#define PC15WE                 0x00000004 /* Allow Wake-Up from PC15 */
+#define PD06WE                 0x00000008 /* Allow Wake-Up from PD06(ETH0_PHYINT) */
+#define PE12WE                 0x00000010 /* Allow Wake-Up from PE12(ETH1_PHYINT, PUSH BUTTON) */
+#define PG04WE                 0x00000020 /* Allow Wake-Up from PG04(CAN0_RX) */
+#define PG13WE                 0x00000040 /* Allow Wake-Up from PG13 */
+#define USBWE                  0x00000080 /* Allow Wake-Up from (USB) */
+#else
 #define WAKE                   0x0100  /* Enable RTC/Reset Wakeup From Hibernate */
 #define CANWE                  0x0200  /* Enable CAN Wakeup From Hibernate */
 #define PHYWE                  0x0400  /* Enable PHY Wakeup From Hibernate */
@@ -744,7 +754,7 @@
 #else
 #define USBWE                  0x0800  /* Enable USB Wakeup From Hibernate */
 #endif
-
+#endif
 
 #ifndef __ASSEMBLY__
 

diff --git a/arch/blackfin/mach-bf609/pm.c b/arch/blackfin/mach-bf609/pm.c
index bbc5a79..79cdf41 100644 (file)
--- a/arch/blackfin/mach-bf609/pm.c
+++ b/arch/blackfin/mach-bf609/pm.c
@@ -212,6 +212,65 @@ void bfin_hibernate(unsigned long mask)
 void bf609_cpu_pm_enter(suspend_state_t state)
 {
        int error;
+       unsigned long wakeup = 0;
+       unsigned long wakeup_pol = 0;
+
+#ifdef CONFIG_PM_BFIN_WAKE_PA15
+       wakeup |= PA15WE;
+# if CONFIG_PM_BFIN_WAKE_PA15_POL
+       wakeup_pol |= PA15WE;
+# endif
+#endif
+
+#ifdef CONFIG_PM_BFIN_WAKE_PB15
+       wakeup |= PB15WE;
+# if CONFIG_PM_BFIN_WAKE_PA15_POL
+       wakeup_pol |= PB15WE;
+# endif
+#endif
+
+#ifdef CONFIG_PM_BFIN_WAKE_PC15
+       wakeup |= PC15WE;
+# if CONFIG_PM_BFIN_WAKE_PC15_POL
+       wakeup_pol |= PC15WE;
+# endif
+#endif
+
+#ifdef CONFIG_PM_BFIN_WAKE_PD06
+       wakeup |= PD06WE;
+# if CONFIG_PM_BFIN_WAKE_PD06_POL
+       wakeup_pol |= PD06WE;
+# endif
+#endif
+
+#ifdef CONFIG_PM_BFIN_WAKE_PE12
+       wakeup |= PE12WE;
+# if CONFIG_PM_BFIN_WAKE_PE12_POL
+       wakeup_pol |= PE12WE;
+# endif
+#endif
+
+#ifdef CONFIG_PM_BFIN_WAKE_PG04
+       wakeup |= PG04WE;
+# if CONFIG_PM_BFIN_WAKE_PG04_POL
+       wakeup_pol |= PG04WE;
+# endif
+#endif
+
+#ifdef CONFIG_PM_BFIN_WAKE_PG13
+       wakeup |= PG13WE;
+# if CONFIG_PM_BFIN_WAKE_PG13_POL
+       wakeup_pol |= PG13WE;
+# endif
+#endif
+
+#ifdef CONFIG_PM_BFIN_WAKE_USB
+       wakeup |= USBWE;
+# if CONFIG_PM_BFIN_WAKE_USB_POL
+       wakeup_pol |= USBWE;
+# endif
+#endif
+
        error = irq_set_irq_wake(255, 1);
        if(error < 0)
                printk(KERN_DEBUG "Unable to get irq wake\n");
@@ -220,9 +279,9 @@ void bf609_cpu_pm_enter(suspend_state_t state)
                printk(KERN_DEBUG "Unable to get irq wake\n");
 
        if (state == PM_SUSPEND_STANDBY)
-               bfin_deepsleep(0xffff);
+               bfin_deepsleep(wakeup);
        else {
-               bfin_hibernate(0xffff);
+               bfin_hibernate(wakeup);
        }
 }
 
@@ -263,26 +322,8 @@ static int __init bf609_init_pm(void)
 {
        int irq;
        int error;
-       error = gpio_request(GPIO_PG4, "gpiopg4");
-       if (error < 0) {
-               printk(KERN_DEBUG "failed to request GPIO %d, error %d\n",
-                               GPIO_PG4, error);
-       }
-
-       irq = gpio_to_irq(GPIO_PG4);
-       if (irq < 0) {
-               error = irq;
-               printk(KERN_DEBUG "Unable to get irq number for GPIO %d, error %d\n",
-                               GPIO_PG4, error);
-       }
-
-       printk(KERN_DEBUG "%s gpio %d irq %d\n", __func__, GPIO_PG4, irq);
-
-       error = request_irq(irq, test_isr, IRQF_TRIGGER_FALLING | IRQF_NO_SUSPEND, "gpiopg4", NULL);
-       if(error < 0)
-               printk(KERN_DEBUG "Unable to get irq\n");
 
-#if 1
+#if CONFIG_PM_BFIN_WAKE_PE12
        irq = gpio_to_irq(GPIO_PE12);
        if (irq < 0) {
                error = irq;

diff --git a/arch/blackfin/mach-common/ints-priority.c b/arch/blackfin/mach-common/ints-priority.c
index 1146a61..2729cba 100644 (file)
--- a/arch/blackfin/mach-common/ints-priority.c
+++ b/arch/blackfin/mach-common/ints-priority.c
@@ -437,7 +437,7 @@ static void bfin_internal_unmask_irq_chip(struct irq_data *d)
 }
 #endif
 
-#ifdef CONFIG_PM
+#if defined(CONFIG_PM) && !defined(CONFIG_BF60x)
 int bfin_internal_set_wake(unsigned int irq, unsigned int state)
 {
        u32 bank, bit, wakeup = 0;
@@ -496,6 +496,7 @@ static int bfin_internal_set_wake_chip(struct irq_data *d, unsigned int state)
        return bfin_internal_set_wake(d->irq, state);
 }
 #else
+# define bfin_internal_set_wake(irq, state)
 # define bfin_internal_set_wake_chip NULL
 #endif
 

diff --git a/arch/blackfin/mach-common/pm.c b/arch/blackfin/mach-common/pm.c
index c25c2f1..610a3cd 100644 (file)
--- a/arch/blackfin/mach-common/pm.c
+++ b/arch/blackfin/mach-common/pm.c
@@ -153,9 +153,6 @@ int bfin_pm_suspend_mem_enter(void)
 
 #ifndef CONFIG_BF60x
        wakeup = bfin_read_VR_CTL() & ~FREQ;
-#else
-
-#endif
        wakeup |= SCKELOW;
 
 #ifdef CONFIG_PM_BFIN_WAKE_PH6
@@ -164,6 +161,7 @@ int bfin_pm_suspend_mem_enter(void)
 #ifdef CONFIG_PM_BFIN_WAKE_GP
        wakeup |= GPWE;
 #endif
+#endif
 
        ret = blackfin_dma_suspend();