board/p1010rdb:Add NAND boot support using new SPL format
authorPrabhakar Kushwaha <prabhakar@freescale.com>
Tue, 16 Apr 2013 07:58:12 +0000 (13:28 +0530)
committerAndy Fleming <afleming@freescale.com>
Thu, 20 Jun 2013 21:09:07 +0000 (16:09 -0500)
- defines constants
  - Add spl_minimal.c to initialise DDR
  - update TLB entries as per NAND boot
  - remove nand_spl support for P1010RDB

Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
board/freescale/p1010rdb/Makefile
board/freescale/p1010rdb/spl_minimal.c [moved from nand_spl/board/freescale/p1010rdb/nand_boot.c with 95% similarity]
board/freescale/p1010rdb/tlb.c
include/configs/P1010RDB.h
nand_spl/board/freescale/p1010rdb/Makefile [deleted file]
nand_spl/nand_boot_fsl_ifc.c [deleted file]

index 4c705b6..e6563be 100644 (file)
@@ -24,11 +24,27 @@ include $(TOPDIR)/config.mk
 
 LIB    = $(obj)lib$(BOARD).o
 
+MINIMAL=
+
+ifdef CONFIG_SPL_BUILD
+ifdef CONFIG_SPL_INIT_MINIMAL
+MINIMAL=y
+endif
+endif
+
+ifdef MINIMAL
+
+COBJS-y        += spl_minimal.o tlb.o law.o
+
+else
+
 COBJS-y        += $(BOARD).o
 COBJS-y        += ddr.o
 COBJS-y        += law.o
 COBJS-y        += tlb.o
 
+endif
+
 SRCS   := $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
 OBJS   := $(addprefix $(obj),$(COBJS-y))
 SOBJS  := $(addprefix $(obj),$(SOBJS))
similarity index 95%
rename from nand_spl/board/freescale/p1010rdb/nand_boot.c
rename to board/freescale/p1010rdb/spl_minimal.c
index 3c7bc2b..c909e0e 100644 (file)
 
 DECLARE_GLOBAL_DATA_PTR;
 
-unsigned long ddr_freq_mhz;
 
 void sdram_init(void)
 {
        ccsr_ddr_t *ddr = (ccsr_ddr_t *)CONFIG_SYS_MPC8xxx_DDR_ADDR;
+       ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
+       u32 ddr_ratio;
+       unsigned long ddr_freq_mhz;
+
+       ddr_ratio = in_be32(&gur->porpllsr) & MPC85xx_PORPLLSR_DDR_RATIO;
+       ddr_ratio = ddr_ratio >> MPC85xx_PORPLLSR_DDR_RATIO_SHIFT;
+       ddr_freq_mhz = (CONFIG_SYS_CLK_FREQ * ddr_ratio) / 0x1000000;
+
        /* mask off E bit */
        u32 svr = SVR_SOC_VER(mfspr(SPRN_SVR));
 
@@ -81,6 +88,7 @@ void sdram_init(void)
                __raw_writel((CONFIG_SYS_DDR_CS0_BNDS >> 1) & 0x0fff0fff, &ddr->cs0_bnds);
        }
 
+       asm volatile("sync;isync");
        udelay(500);
 
        /* Let the controller go */
@@ -91,7 +99,7 @@ void sdram_init(void)
 
 void board_init_f(ulong bootflag)
 {
-       u32 plat_ratio, ddr_ratio;
+       u32 plat_ratio;
        ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
 
        /* initialize selected port with appropriate baud rate */
@@ -99,10 +107,6 @@ void board_init_f(ulong bootflag)
        plat_ratio >>= 1;
        gd->bus_clk = CONFIG_SYS_CLK_FREQ * plat_ratio;
 
-       ddr_ratio = in_be32(&gur->porpllsr) & MPC85xx_PORPLLSR_DDR_RATIO;
-       ddr_ratio = ddr_ratio >> MPC85xx_PORPLLSR_DDR_RATIO_SHIFT;
-       ddr_freq_mhz = (CONFIG_SYS_CLK_FREQ * ddr_ratio) / 0x1000000;
-
        NS16550_init((NS16550_t)CONFIG_SYS_NS16550_COM1,
                        gd->bus_clk / 16 / CONFIG_BAUDRATE);
 
@@ -115,8 +119,8 @@ void board_init_f(ulong bootflag)
        /* NOTE - code has to be copied out of NAND buffer before
         * other blocks can be read.
         */
-       relocate_code(CONFIG_SYS_NAND_U_BOOT_RELOC_SP, 0,
-                       CONFIG_SYS_NAND_U_BOOT_RELOC);
+
+       relocate_code(CONFIG_SPL_RELOC_STACK, 0, CONFIG_SPL_RELOC_TEXT_BASE);
 }
 
 void board_init_r(gd_t *gd, ulong dest_addr)
index 4256bf4..7a8690a 100644 (file)
@@ -43,16 +43,16 @@ struct fsl_e_tlb_entry tlb_table[] = {
 
        /* TLB 1 */
        /* *I*** - Covers boot page */
-       SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000,
-                       MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-                       0, 0, BOOKE_PAGESZ_4K, 1),
+       SET_TLB_ENTRY(1, 0xffffe000, 0xffffe000,
+                     MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+                     0, 0, BOOKE_PAGESZ_8K, 1),
 
        /* *I*G* - CCSRBAR */
        SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
                        MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
                        0, 1, BOOKE_PAGESZ_1M, 1),
 
-#ifndef CONFIG_NAND_SPL
+#ifndef CONFIG_SPL_BUILD
 #ifndef CONFIG_SDCARD
        SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE_PHYS,
                        MAS3_SX|MAS3_SR, MAS2_W|MAS2_G,
@@ -64,7 +64,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
                        0, 3, BOOKE_PAGESZ_16M, 1),
 #endif
 
-#ifdef CONFIG_PCI
+#ifndef CONFIG_PCI
        /* *I*G* - PCI */
        SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT, CONFIG_SYS_PCIE1_MEM_PHYS,
                        MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
@@ -88,7 +88,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
                        0, 7, BOOKE_PAGESZ_1M, 1),
 #endif
 
-#if defined(CONFIG_SYS_RAMBOOT)
+#if defined(CONFIG_SYS_RAMBOOT) || defined(CONFIG_SPL)
        SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE,
                        MAS3_SX|MAS3_SW|MAS3_SR, 0,
                        0, 8, BOOKE_PAGESZ_1G, 1)
index 0eeee65..7b28a27 100644 (file)
 #define CONFIG_RESET_VECTOR_ADDRESS    0x1107fffc
 #endif
 
-#ifdef CONFIG_NAND     /* NAND Boot */
-#define CONFIG_RAMBOOT_NAND
-#define CONFIG_NAND_U_BOOT
-#define CONFIG_SYS_TEXT_BASE_SPL       0xff800000
-#ifdef CONFIG_NAND_SPL
-#define CONFIG_SYS_MONITOR_BASE                CONFIG_SYS_TEXT_BASE_SPL
-#else
-#define CONFIG_SYS_TEXT_BASE           0x11001000
-#endif /* CONFIG_NAND_SPL */
+#ifdef CONFIG_NAND
+#define CONFIG_SPL
+#define CONFIG_SPL_INIT_MINIMAL
+#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_NAND_SUPPORT
+#define CONFIG_SPL_NAND_MINIMAL
+#define CONFIG_SPL_FLUSH_IMAGE
+#define CONFIG_SPL_TARGET              "u-boot-with-spl.bin"
+
+#define CONFIG_SYS_TEXT_BASE           0x00201000
+#define CONFIG_SPL_TEXT_BASE           0xFFFFE000
+#define CONFIG_SPL_MAX_SIZE            8192
+#define CONFIG_SPL_RELOC_TEXT_BASE     0x00100000
+#define CONFIG_SPL_RELOC_STACK         0x00100000
+#define CONFIG_SYS_NAND_U_BOOT_SIZE    ((512 << 10) - 0x2000)
+#define CONFIG_SYS_NAND_U_BOOT_DST     (0x00200000 - CONFIG_SPL_MAX_SIZE)
+#define CONFIG_SYS_NAND_U_BOOT_START   0x00200000
+#define CONFIG_SYS_NAND_U_BOOT_OFFS    0
+#define CONFIG_SYS_LDSCRIPT    "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
 #endif
 
 
 #define CONFIG_RESET_VECTOR_ADDRESS    0xeffffffc
 #endif
 
-#ifndef CONFIG_SYS_MONITOR_BASE
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
+#ifdef CONFIG_SPL_BUILD
+#define CONFIG_SYS_MONITOR_BASE        CONFIG_SPL_TEXT_BASE
+#else
+#define CONFIG_SYS_MONITOR_BASE        CONFIG_SYS_TEXT_BASE    /* start of monitor */
 #endif
 
 /* High Level Configuration Options */
@@ -242,7 +254,7 @@ extern unsigned long get_sdram_size(void);
 #define CONFIG_SYS_CCSRBAR_PHYS_LOW            CONFIG_SYS_CCSRBAR
 
 /* Don't relocate CCSRBAR while in NAND_SPL */
-#ifdef CONFIG_NAND_SPL
+#ifdef CONFIG_SPL_BUILD
 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
 #endif
 
@@ -268,6 +280,10 @@ extern unsigned long get_sdram_size(void);
  * IFC Definitions
  */
 /* NOR Flash on IFC */
+#ifdef CONFIG_SPL_BUILD
+#define CONFIG_SYS_NO_FLASH
+#endif
+
 #define CONFIG_SYS_FLASH_BASE          0xee000000
 #define CONFIG_SYS_MAX_FLASH_SECT      256     /* 32M */
 
@@ -353,7 +369,7 @@ extern unsigned long get_sdram_size(void);
 #define CONFIG_SYS_NAND_DDR_LAW                11
 
 /* Set up IFC registers for boot location NOR/NAND */
-#if defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SECBOOT)
+#if defined(CONFIG_NAND) || defined(CONFIG_NAND_SECBOOT)
 #define CONFIG_SYS_CSPR0               CONFIG_SYS_NAND_CSPR
 #define CONFIG_SYS_AMASK0              CONFIG_SYS_NAND_AMASK
 #define CONFIG_SYS_CSOR0               CONFIG_SYS_NAND_CSOR
@@ -385,15 +401,6 @@ extern unsigned long get_sdram_size(void);
 #define CONFIG_SYS_CS1_FTIM3           CONFIG_SYS_NAND_FTIM3
 #endif
 
-/* NAND boot: 8K NAND loader config */
-#define CONFIG_SYS_NAND_SPL_SIZE       0x2000
-#define CONFIG_SYS_NAND_U_BOOT_SIZE    (512 << 10)
-#define CONFIG_SYS_NAND_U_BOOT_DST     (0x11000000 - CONFIG_SYS_NAND_SPL_SIZE)
-#define CONFIG_SYS_NAND_U_BOOT_START   0x11000000
-#define CONFIG_SYS_NAND_U_BOOT_OFFS    (0)
-#define CONFIG_SYS_NAND_U_BOOT_RELOC   0x10000
-#define CONFIG_SYS_NAND_U_BOOT_RELOC_SP        (CONFIG_SYS_NAND_U_BOOT_RELOC + 0x10000)
-
 /* CPLD on IFC */
 #define CONFIG_SYS_CPLD_BASE           0xffb00000
 
@@ -421,8 +428,7 @@ extern unsigned long get_sdram_size(void);
 #define CONFIG_SYS_CS3_FTIM3           0x0
 #endif /* CONFIG_SDCARD */
 
-#if defined(CONFIG_RAMBOOT_SDCARD) || defined(CONFIG_RAMBOOT_SPIFLASH) || \
-    defined(CONFIG_RAMBOOT_NAND)
+#if defined(CONFIG_RAMBOOT_SDCARD) || defined(CONFIG_RAMBOOT_SPIFLASH)
 #define CONFIG_SYS_RAMBOOT
 #define CONFIG_SYS_EXTRA_ENV_RELOC
 #else
@@ -457,7 +463,7 @@ extern unsigned long get_sdram_size(void);
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    1
 #define CONFIG_SYS_NS16550_CLK         get_bus_freq(0)
-#ifdef CONFIG_NAND_SPL
+#ifdef CONFIG_SPL_BUILD
 #define CONFIG_NS16550_MIN_FUNCTIONS
 #endif
 
@@ -512,7 +518,7 @@ extern unsigned long get_sdram_size(void);
  * SPI interface will not be available in case of NAND boot SPI CS0 will be
  * used for SLIC
  */
-#if !defined(CONFIG_NAND_U_BOOT) || !defined(CONFIG_NAND_SECBOOT)
+#if !defined(CONFIG_NAND) || !defined(CONFIG_NAND_SECBOOT)
 /* eSPI - Enhanced SPI */
 #define CONFIG_FSL_ESPI
 #define CONFIG_SPI_FLASH
@@ -607,7 +613,6 @@ extern unsigned long get_sdram_size(void);
 /*
  * Environment
  */
-#if defined(CONFIG_SYS_RAMBOOT)
 #if defined(CONFIG_RAMBOOT_SDCARD)
 #define CONFIG_ENV_IS_IN_MMC
 #define CONFIG_FSL_FIXED_MMC_LOCATION
@@ -622,16 +627,15 @@ extern unsigned long get_sdram_size(void);
 #define CONFIG_ENV_OFFSET      0x100000        /* 1MB */
 #define CONFIG_ENV_SECT_SIZE   0x10000
 #define CONFIG_ENV_SIZE                0x2000
-#elif defined(CONFIG_NAND_U_BOOT)
+#elif defined(CONFIG_NAND)
 #define CONFIG_ENV_IS_IN_NAND
 #define CONFIG_ENV_SIZE                CONFIG_SYS_NAND_BLOCK_SIZE
-#define CONFIG_ENV_OFFSET      CONFIG_SYS_NAND_U_BOOT_SIZE
+#define CONFIG_ENV_OFFSET      ((512 * 1024) + CONFIG_SYS_NAND_BLOCK_SIZE)
 #define CONFIG_ENV_RANGE       (3 * CONFIG_ENV_SIZE)
-#else
+#elif defined(CONFIG_SYS_RAMBOOT)
 #define CONFIG_ENV_IS_NOWHERE          /* Store ENV in memory only */
 #define CONFIG_ENV_ADDR                        (CONFIG_SYS_MONITOR_BASE - 0x1000)
 #define CONFIG_ENV_SIZE                        0x2000
-#endif
 #else
 #define CONFIG_ENV_IS_IN_FLASH
 #if CONFIG_SYS_MONITOR_BASE > 0xfff80000
diff --git a/nand_spl/board/freescale/p1010rdb/Makefile b/nand_spl/board/freescale/p1010rdb/Makefile
deleted file mode 100644 (file)
index f7bdf92..0000000
+++ /dev/null
@@ -1,142 +0,0 @@
-#
-# (C) Copyright 2007
-# Stefan Roese, DENX Software Engineering, sr@denx.de.
-#
-# Copyright 2011 Freescale Semiconductor, Inc.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-NAND_SPL := y
-CONFIG_SYS_TEXT_BASE_SPL := 0xff800000
-PAD_TO := 0xff802000
-
-include $(TOPDIR)/config.mk
-
-nandobj        := $(OBJTREE)/nand_spl/
-
-LDSCRIPT= $(TOPDIR)/$(CPUDIR)/u-boot-nand_spl.lds
-LDFLAGS := -T $(nandobj)u-boot-nand_spl.lds -Ttext $(CONFIG_SYS_TEXT_BASE_SPL) $(LDFLAGS) \
-          $(LDFLAGS_FINAL)
-AFLAGS += -DCONFIG_NAND_SPL
-CFLAGS += -DCONFIG_NAND_SPL
-
-SOBJS  = start.o resetvec.o ticks.o
-COBJS  = cache.o cpu_init_early.o spl_minimal.o fsl_law.o law.o \
-         nand_boot.o nand_boot_fsl_ifc.o ns16550.o tlb.o tlb_table.o
-
-SRCS   := $(addprefix $(obj),$(SOBJS:.o=.S) $(COBJS:.o=.c))
-OBJS   := $(addprefix $(obj),$(SOBJS) $(COBJS))
-__OBJS := $(SOBJS) $(COBJS)
-LNDIR  := $(nandobj)board/$(BOARDDIR)
-
-ALL    = $(nandobj)u-boot-spl $(nandobj)u-boot-spl.bin $(nandobj)u-boot-spl-16k.bin
-
-all:   $(obj).depend $(ALL)
-
-$(nandobj)u-boot-spl-16k.bin: $(nandobj)u-boot-spl
-       $(OBJCOPY) ${OBJCFLAGS} --pad-to=$(PAD_TO) -O binary $< $@
-
-$(nandobj)u-boot-spl.bin:      $(nandobj)u-boot-spl
-       $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@
-
-$(nandobj)u-boot-spl:  $(OBJS) $(nandobj)u-boot-nand_spl.lds
-       cd $(LNDIR) && $(LD) $(LDFLAGS) $(__OBJS) $(PLATFORM_LIBS) \
-               -Map $(nandobj)u-boot-spl.map \
-               -o $(nandobj)u-boot-spl
-
-$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT)
-       $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(nandobj)board/$(BOARDDIR) \
-                -ansi -D__ASSEMBLY__ -P - <$< >$@
-
-# create symbolic links for common files
-
-$(obj)cache.c:
-       @rm -f $(obj)cache.c
-       ln -sf $(SRCTREE)/arch/powerpc/lib/cache.c $(obj)cache.c
-
-$(obj)cpu_init_early.c:
-       @rm -f $(obj)cpu_init_early.c
-       ln -sf $(SRCTREE)/$(CPUDIR)/cpu_init_early.c $(obj)cpu_init_early.c
-
-$(obj)spl_minimal.c:
-       @rm -f $(obj)spl_minimal.c
-       ln -sf $(SRCTREE)/$(CPUDIR)/spl_minimal.c $(obj)spl_minimal.c
-
-$(obj)fsl_law.c:
-       @rm -f $(obj)fsl_law.c
-       ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc8xxx/law.c $(obj)fsl_law.c
-
-$(obj)law.c:
-       @rm -f $(obj)law.c
-       ln -sf $(SRCTREE)/board/$(BOARDDIR)/law.c $(obj)law.c
-
-$(obj)nand_boot_fsl_ifc.c:
-       @rm -f $(obj)nand_boot_fsl_ifc.c
-       ln -sf $(SRCTREE)/nand_spl/nand_boot_fsl_ifc.c \
-              $(obj)nand_boot_fsl_ifc.c
-
-$(obj)ns16550.c:
-       @rm -f $(obj)ns16550.c
-       ln -sf $(SRCTREE)/drivers/serial/ns16550.c $(obj)ns16550.c
-
-$(obj)resetvec.S:
-       @rm -f $(obj)resetvec.S
-       ln -s $(SRCTREE)/$(CPUDIR)/resetvec.S $(obj)resetvec.S
-
-$(obj)fixed_ivor.S:
-       @rm -f $(obj)fixed_ivor.S
-       ln -sf $(SRCTREE)/$(CPUDIR)/fixed_ivor.S $(obj)fixed_ivor.S
-
-$(obj)start.S: $(obj)fixed_ivor.S
-       @rm -f $(obj)start.S
-       ln -sf $(SRCTREE)/$(CPUDIR)/start.S $(obj)start.S
-
-$(obj)ticks.S:
-       @rm -f $(obj)ticks.S
-       ln -sf $(SRCTREE)/arch/powerpc/lib/ticks.S $(obj)ticks.S
-
-$(obj)tlb.c:
-       @rm -f $(obj)tlb.c
-       ln -sf $(SRCTREE)/$(CPUDIR)/tlb.c $(obj)tlb.c
-
-$(obj)tlb_table.c:
-       @rm -f $(obj)tlb_table.c
-       ln -sf $(SRCTREE)/board/$(BOARDDIR)/tlb.c $(obj)tlb_table.c
-
-ifneq ($(OBJTREE), $(SRCTREE))
-$(obj)nand_boot.c:
-       @rm -f $(obj)nand_boot.c
-       ln -s $(SRCTREE)/nand_spl/board/$(BOARDDIR)/nand_boot.c $(obj)nand_boot.c
-endif
-
-#########################################################################
-
-$(obj)%.o:     $(obj)%.S
-       $(CC) $(AFLAGS) -c -o $@ $<
-
-$(obj)%.o:     $(obj)%.c
-       $(CC) $(CFLAGS) -c -o $@ $<
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/nand_spl/nand_boot_fsl_ifc.c b/nand_spl/nand_boot_fsl_ifc.c
deleted file mode 100644 (file)
index 44972c5..0000000
+++ /dev/null
@@ -1,271 +0,0 @@
-/*
- * NAND boot for FSL Integrated Flash Controller, NAND Flash Control Machine
- *
- * Copyright 2011 Freescale Semiconductor, Inc.
- * Author: Dipen Dudhat <dipen.dudhat@freescale.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/fsl_ifc.h>
-#include <linux/mtd/nand.h>
-
-static inline int is_blank(uchar *addr, int page_size)
-{
-       int i;
-
-       for (i = 0; i < page_size; i++) {
-               if (__raw_readb(&addr[i]) != 0xff)
-                       return 0;
-       }
-
-       /*
-        * For the SPL, don't worry about uncorrectable errors
-        * where the main area is all FFs but shouldn't be.
-        */
-       return 1;
-}
-
-/* returns nonzero if entire page is blank */
-static inline int check_read_ecc(uchar *buf, u32 *eccstat,
-                                unsigned int bufnum, int page_size)
-{
-       u32 reg = eccstat[bufnum / 4];
-       int errors = (reg >> ((3 - bufnum % 4) * 8)) & 15;
-
-       if (errors == 15) { /* uncorrectable */
-               /* Blank pages fail hw ECC checks */
-               if (is_blank(buf, page_size))
-                       return 1;
-
-               puts("ecc error\n");
-               for (;;)
-                       ;
-       }
-
-       return 0;
-}
-
-static inline void nand_wait(uchar *buf, int bufnum, int page_size)
-{
-       struct fsl_ifc *ifc = IFC_BASE_ADDR;
-       u32 status;
-       u32 eccstat[4];
-       int bufperpage = page_size / 512;
-       int bufnum_end, i;
-
-       bufnum *= bufperpage;
-       bufnum_end = bufnum + bufperpage - 1;
-
-       do {
-               status = in_be32(&ifc->ifc_nand.nand_evter_stat);
-       } while (!(status & IFC_NAND_EVTER_STAT_OPC));
-
-       if (status & IFC_NAND_EVTER_STAT_FTOER) {
-               puts("flash time out error\n");
-               for (;;)
-                       ;
-       }
-
-       for (i = bufnum / 4; i <= bufnum_end / 4; i++)
-               eccstat[i] = in_be32(&ifc->ifc_nand.nand_eccstat[i]);
-
-       for (i = bufnum; i <= bufnum_end; i++) {
-               if (check_read_ecc(buf, eccstat, i, page_size))
-                       break;
-       }
-
-       out_be32(&ifc->ifc_nand.nand_evter_stat, status);
-}
-
-static inline int bad_block(uchar *marker, int port_size)
-{
-       if (port_size == 8)
-               return __raw_readb(marker) != 0xff;
-       else
-               return __raw_readw((u16 *)marker) != 0xffff;
-}
-
-static void nand_load(unsigned int offs, int uboot_size, uchar *dst)
-{
-       struct fsl_ifc *ifc = IFC_BASE_ADDR;
-       uchar *buf = (uchar *)CONFIG_SYS_NAND_BASE;
-       int page_size;
-       int port_size;
-       int pages_per_blk;
-       int blk_size;
-       int bad_marker = 0;
-       int bufnum_mask, bufnum;
-
-       int csor, cspr;
-       int pos = 0;
-       int j = 0;
-
-       int sram_addr;
-       int pg_no;
-
-       /* Get NAND Flash configuration */
-       csor = CONFIG_SYS_NAND_CSOR;
-       cspr = CONFIG_SYS_NAND_CSPR;
-
-       if (!(csor & CSOR_NAND_ECC_DEC_EN)) {
-               /* soft ECC in SPL is unimplemented */
-               puts("WARNING: soft ECC not checked in SPL\n");
-       } else {
-               u32 hwcsor;
-
-               /* make sure board is configured with ECC on boot */
-               hwcsor = in_be32(&ifc->csor_cs[0].csor);
-               if (!(hwcsor & CSOR_NAND_ECC_DEC_EN))
-                       puts("WARNING: ECC not checked in SPL, "
-                               "check board cfg\n");
-       }
-
-       port_size = (cspr & CSPR_PORT_SIZE_16) ? 16 : 8;
-
-       if (csor & CSOR_NAND_PGS_4K) {
-               page_size = 4096;
-               bufnum_mask = 1;
-       } else if (csor & CSOR_NAND_PGS_2K) {
-               page_size = 2048;
-               bufnum_mask = 3;
-       } else {
-               page_size = 512;
-               bufnum_mask = 15;
-
-               if (port_size == 8)
-                       bad_marker = 5;
-       }
-
-       pages_per_blk =
-               32 << ((csor & CSOR_NAND_PB_MASK) >> CSOR_NAND_PB_SHIFT);
-
-       blk_size = pages_per_blk * page_size;
-
-       /* Open Full SRAM mapping for spare are access */
-       out_be32(&ifc->ifc_nand.ncfgr, 0x0);
-
-       /* Clear Boot events */
-       out_be32(&ifc->ifc_nand.nand_evter_stat, 0xffffffff);
-
-       /* Program FIR/FCR for Large/Small page */
-       if (page_size > 512) {
-               out_be32(&ifc->ifc_nand.nand_fir0,
-                        (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
-                        (IFC_FIR_OP_CA0 << IFC_NAND_FIR0_OP1_SHIFT) |
-                        (IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP2_SHIFT) |
-                        (IFC_FIR_OP_CMD1 << IFC_NAND_FIR0_OP3_SHIFT) |
-                        (IFC_FIR_OP_BTRD << IFC_NAND_FIR0_OP4_SHIFT));
-               out_be32(&ifc->ifc_nand.nand_fir1, 0x0);
-
-               out_be32(&ifc->ifc_nand.nand_fcr0,
-                       (NAND_CMD_READ0 << IFC_NAND_FCR0_CMD0_SHIFT) |
-                       (NAND_CMD_READSTART << IFC_NAND_FCR0_CMD1_SHIFT));
-       } else {
-               out_be32(&ifc->ifc_nand.nand_fir0,
-                        (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
-                        (IFC_FIR_OP_CA0 << IFC_NAND_FIR0_OP1_SHIFT) |
-                        (IFC_FIR_OP_RA0  << IFC_NAND_FIR0_OP2_SHIFT) |
-                        (IFC_FIR_OP_BTRD << IFC_NAND_FIR0_OP3_SHIFT));
-               out_be32(&ifc->ifc_nand.nand_fir1, 0x0);
-
-               out_be32(&ifc->ifc_nand.nand_fcr0,
-                       NAND_CMD_READ0 << IFC_NAND_FCR0_CMD0_SHIFT);
-       }
-
-       /* Program FBCR = 0 for full page read */
-       out_be32(&ifc->ifc_nand.nand_fbcr, 0);
-
-       /* Read and copy u-boot on SDRAM from NAND device, In parallel
-        * check for Bad block if found skip it and read continue to
-        * next Block
-        */
-       while (pos < uboot_size) {
-               int i = 0;
-               do {
-                       pg_no = offs / page_size;
-                       bufnum = pg_no & bufnum_mask;
-                       sram_addr = bufnum * page_size * 2;
-
-                       out_be32(&ifc->ifc_nand.row0, pg_no);
-                       out_be32(&ifc->ifc_nand.col0, 0);
-                       /* start read */
-                       out_be32(&ifc->ifc_nand.nandseq_strt,
-                               IFC_NAND_SEQ_STRT_FIR_STRT);
-
-                       /* wait for read to complete */
-                       nand_wait(&buf[sram_addr], bufnum, page_size);
-
-                       /*
-                        * If either of the first two pages are marked bad,
-                        * continue to the next block.
-                        */
-                       if (i++ < 2 &&
-                           bad_block(&buf[sram_addr + page_size + bad_marker],
-                                     port_size)) {
-                               puts("skipping\n");
-                               offs = (offs + blk_size) & ~(blk_size - 1);
-                               pos &= ~(blk_size - 1);
-                               break;
-                       }
-
-                       for (j = 0; j < page_size; j++)
-                               dst[pos + j] = __raw_readb(&buf[sram_addr + j]);
-
-                       pos += page_size;
-                       offs += page_size;
-               } while ((offs & (blk_size - 1)) && (pos < uboot_size));
-       }
-}
-
-/*
- * Main entrypoint for NAND Boot. It's necessary that SDRAM is already
- * configured and available since this code loads the main U-boot image
- * from NAND into SDRAM and starts from there.
- */
-void nand_boot(void)
-{
-       __attribute__((noreturn)) void (*uboot)(void);
-
-       /*
-        * Load U-Boot image from NAND into RAM
-        */
-       nand_load(CONFIG_SYS_NAND_U_BOOT_OFFS, CONFIG_SYS_NAND_U_BOOT_SIZE,
-                 (uchar *)CONFIG_SYS_NAND_U_BOOT_DST);
-
-#ifdef CONFIG_NAND_ENV_DST
-       nand_load(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE,
-                 (uchar *)CONFIG_NAND_ENV_DST);
-
-#ifdef CONFIG_ENV_OFFSET_REDUND
-       nand_load(CONFIG_ENV_OFFSET_REDUND, CONFIG_ENV_SIZE,
-                 (uchar *)CONFIG_NAND_ENV_DST + CONFIG_ENV_SIZE);
-#endif
-#endif
-
-       /*
-        * Jump to U-Boot image
-        */
-       /*
-        * Clean d-cache and invalidate i-cache, to
-        * make sure that no stale data is executed.
-        */
-       flush_cache(CONFIG_SYS_NAND_U_BOOT_DST, CONFIG_SYS_NAND_U_BOOT_SIZE);
-       uboot = (void *)CONFIG_SYS_NAND_U_BOOT_START;
-       uboot();
-}