fi
fi
-# Determine whether or not multilibs are enabled.
-# Check whether --enable-multilib or --disable-multilib was given.
-if test "${enable_multilib+set}" = set; then
- enableval="$enable_multilib"
- :
-else
- enable_multilib=yes
-fi
-
-
-
-# Enable expensive internal checks
-# Check whether --enable-checking or --disable-checking was given.
-if test "${enable_checking+set}" = set; then
- enableval="$enable_checking"
- ac_checking=
-ac_tree_checking=
-ac_rtl_checking=
-ac_rtlflag_checking=
-ac_gc_checking=
-ac_gc_always_collect=
-case "${enableval}" in
-yes) ac_checking=1 ; ac_tree_checking=1 ; ac_gc_checking=1 ;
- ac_rtlflag_checking=1 ;;
-no) ;;
-*) IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS="$IFS,"
- set fnord $enableval; shift
- IFS="$ac_save_IFS"
- for check
- do
- case $check in
- misc) ac_checking=1 ;;
- tree) ac_tree_checking=1 ;;
- rtlflag) ac_rtlflag_checking=1 ;;
- rtl) ac_rtl_checking=1 ;;
- gc) ac_gc_checking=1 ;;
- gcac) ac_gc_always_collect=1 ;;
- *) { echo "configure: error: unknown check category $check" 1>&2; exit 1; } ;;
- esac
- done
- ;;
-esac
-
-else
- # Enable some checks by default for development versions of GCC
-ac_checking=1; ac_tree_checking=1; ac_gc_checking=1; ac_rtlflag_checking=1;
-fi
-
-nocommon_flag=""
-if test x$ac_checking != x ; then
- cat >> confdefs.h <<\EOF
-#define ENABLE_CHECKING 1
-EOF
-
- nocommon_flag=-fno-common
-fi
-
-if test x$ac_tree_checking != x ; then
- cat >> confdefs.h <<\EOF
-#define ENABLE_TREE_CHECKING 1
-EOF
-
-fi
-if test x$ac_rtl_checking != x ; then
- cat >> confdefs.h <<\EOF
-#define ENABLE_RTL_CHECKING 1
-EOF
-
-fi
-if test x$ac_rtlflag_checking != x ; then
- cat >> confdefs.h <<\EOF
-#define ENABLE_RTL_FLAG_CHECKING 1
-EOF
-
-fi
-if test x$ac_gc_checking != x ; then
- cat >> confdefs.h <<\EOF
-#define ENABLE_GC_CHECKING 1
-EOF
-
-fi
-if test x$ac_gc_always_collect != x ; then
- cat >> confdefs.h <<\EOF
-#define ENABLE_GC_ALWAYS_COLLECT 1
-EOF
-
-fi
-
-# Enable code coverage collection
-# Check whether --enable-coverage or --disable-coverage was given.
-if test "${enable_coverage+set}" = set; then
- enableval="$enable_coverage"
- case "${enableval}" in
-yes|noopt)
- coverage_flags="-fprofile-arcs -ftest-coverage -O0"
- ;;
-opt)
- coverage_flags="-fprofile-arcs -ftest-coverage -O2"
- ;;
-*)
- { echo "configure: error: unknown coverage setting $enableval" 1>&2; exit 1; }
- ;;
-esac
-else
- coverage_flags=""
-fi
-
-
-
-# Check whether --with-cpp_install_dir or --without-cpp_install_dir was given.
-if test "${with_cpp_install_dir+set}" = set; then
- withval="$with_cpp_install_dir"
- if test x$withval = xyes; then
- { echo "configure: error: option --with-cpp-install-dir requires an argument" 1>&2; exit 1; }
-elif test x$withval != xno; then
- cpp_install_dir=$withval
-fi
-fi
-
-
-# Enable __cxa_atexit for C++.
-# Check whether --enable-__cxa_atexit or --disable-__cxa_atexit was given.
-if test "${enable___cxa_atexit+set}" = set; then
- enableval="$enable___cxa_atexit"
- :
-fi
-
-if test x$enable___cxa_atexit = xyes; then
- cat >> confdefs.h <<\EOF
-#define DEFAULT_USE_CXA_ATEXIT 1
-EOF
-
-fi
-
-# Enable Multibyte Characters for C/C++
-# Check whether --enable-c-mbchar or --disable-c-mbchar was given.
-if test "${enable_c_mbchar+set}" = set; then
- enableval="$enable_c_mbchar"
- if test x$enable_c_mbchar != xno; then
- cat >> confdefs.h <<\EOF
-#define MULTIBYTE_CHARS 1
-EOF
-
-fi
-fi
-
-
-# Enable threads
-# Pass with no value to take the default
-# Pass with a value to specify a thread package
-# Check whether --enable-threads or --disable-threads was given.
-if test "${enable_threads+set}" = set; then
- enableval="$enable_threads"
- :
-else
- enable_threads=''
-fi
-
-
-enable_threads_flag=$enable_threads
-# Check if a valid thread package
-case x${enable_threads_flag} in
- x | xno)
- # No threads
- target_thread_file='single'
- ;;
- xyes)
- # default
- target_thread_file=''
- ;;
- xdecosf1 | xirix | xmach | xos2 | xposix | xpthreads | xsingle | \
- xsolaris | xwin32 | xdce | xrtems| xvxworks | xaix)
- target_thread_file=$enable_threads_flag
- ;;
- *)
- echo "$enable_threads is an unknown thread package" 1>&2
- exit 1
- ;;
-esac
-
-# Check whether --enable-objc-gc or --disable-objc-gc was given.
-if test "${enable_objc_gc+set}" = set; then
- enableval="$enable_objc_gc"
- if test x$enable_objc_gc = xno; then
- objc_boehm_gc=''
-else
- objc_boehm_gc=1
-fi
-else
- objc_boehm_gc=''
-fi
-
-
-# Check whether --with-dwarf2 or --without-dwarf2 was given.
-if test "${with_dwarf2+set}" = set; then
- withval="$with_dwarf2"
- dwarf2="$with_dwarf2"
-else
- dwarf2=no
-fi
-
-
-# Check whether --enable-shared or --disable-shared was given.
-if test "${enable_shared+set}" = set; then
- enableval="$enable_shared"
-
- case $enable_shared in
- yes | no) ;;
- *)
- enable_shared=no
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
- for pkg in $enableval; do
- if test "X$pkg" = "Xgcc" || test "X$pkg" = "Xlibgcc"; then
- enable_shared=yes
- fi
- done
- IFS="$ac_save_ifs"
- ;;
- esac
-
-else
- enable_shared=yes
-fi
-
-
-
-# Determine the host, build, and target systems
-ac_aux_dir=
-for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
- if test -f $ac_dir/install-sh; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/install-sh -c"
- break
- elif test -f $ac_dir/install.sh; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/install.sh -c"
- break
- fi
-done
-if test -z "$ac_aux_dir"; then
- { echo "configure: error: can not find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." 1>&2; exit 1; }
-fi
-ac_config_guess=$ac_aux_dir/config.guess
-ac_config_sub=$ac_aux_dir/config.sub
-ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
-
-
-# Do some error checking and defaulting for the host and target type.
-# The inputs are:
-# configure --host=HOST --target=TARGET --build=BUILD NONOPT
-#
-# The rules are:
-# 1. You are not allowed to specify --host, --target, and nonopt at the
-# same time.
-# 2. Host defaults to nonopt.
-# 3. If nonopt is not specified, then host defaults to the current host,
-# as determined by config.guess.
-# 4. Target and build default to nonopt.
-# 5. If nonopt is not specified, then target and build default to host.
-
-# The aliases save the names the user supplied, while $host etc.
-# will get canonicalized.
-case $host---$target---$nonopt in
-NONE---*---* | *---NONE---* | *---*---NONE) ;;
-*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
-esac
-
-
-# Make sure we can run config.sub.
-if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
-else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:1069: checking host system type" >&5
-
-host_alias=$host
-case "$host_alias" in
-NONE)
- case $nonopt in
- NONE)
- if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
- else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
- fi ;;
- *) host_alias=$nonopt ;;
- esac ;;
-esac
-
-host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
-host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$host" 1>&6
-
-echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:1090: checking target system type" >&5
-
-target_alias=$target
-case "$target_alias" in
-NONE)
- case $nonopt in
- NONE) target_alias=$host_alias ;;
- *) target_alias=$nonopt ;;
- esac ;;
-esac
-
-target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
-target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$target" 1>&6
-
-echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:1108: checking build system type" >&5
-
-build_alias=$build
-case "$build_alias" in
-NONE)
- case $nonopt in
- NONE) build_alias=$host_alias ;;
- *) build_alias=$nonopt ;;
- esac ;;
-esac
-
-build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
-build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$build" 1>&6
-
-test "$host_alias" != "$target_alias" &&
- test "$program_prefix$program_suffix$program_transform_name" = \
- NONENONEs,x,x, &&
- program_prefix=${target_alias}-
-
-
-# Set program_transform_name
-if test "$program_transform_name" = s,x,x,; then
- program_transform_name=
-else
- # Double any \ or $. echo might interpret backslashes.
- cat <<\EOF_SED > conftestsed
-s,\\,\\\\,g; s,\$,$$,g
-EOF_SED
- program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
- rm -f conftestsed
-fi
-test "$program_prefix" != NONE &&
- program_transform_name="s,^,${program_prefix},; $program_transform_name"
-# Use a double $ so make ignores it.
-test "$program_suffix" != NONE &&
- program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
-
-# sed with no file args requires a program.
-test "$program_transform_name" = "" && program_transform_name="s,x,x,"
-
-
# Find the native compiler
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1156: checking for $ac_word" >&5
+echo "configure:799: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1186: checking for $ac_word" >&5
+echo "configure:829: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cl", so it can be a program name with args.
set dummy cl; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1237: checking for $ac_word" >&5
+echo "configure:880: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:1269: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:912: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
cat > conftest.$ac_ext << EOF
-#line 1280 "configure"
+#line 923 "configure"
#include "confdefs.h"
main(){return(0);}
EOF
-if { (eval echo configure:1285: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:928: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
ac_cv_prog_cc_works=yes
# If we can't run a trivial program, we are probably using a cross compiler.
if (./conftest; exit) 2>/dev/null; then
{ echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:1311: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:954: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
cross_compiling=$ac_cv_prog_cc_cross
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1316: checking whether we are using GNU C" >&5
+echo "configure:959: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
yes;
#endif
EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1325: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:968: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1344: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:987: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test "x$CC" != xcc; then
echo $ac_n "checking whether $CC and cc understand -c and -o together""... $ac_c" 1>&6
-echo "configure:1377: checking whether $CC and cc understand -c and -o together" >&5
+echo "configure:1020: checking whether $CC and cc understand -c and -o together" >&5
else
echo $ac_n "checking whether cc understands -c and -o together""... $ac_c" 1>&6
-echo "configure:1380: checking whether cc understands -c and -o together" >&5
+echo "configure:1023: checking whether cc understands -c and -o together" >&5
fi
set dummy $CC; ac_cc="`echo $2 |
sed -e 's/[^a-zA-Z0-9_]/_/g' -e 's/^[0-9]/_/'`"
# We do the test twice because some compilers refuse to overwrite an
# existing .o file with -o, though they will create one.
ac_try='${CC-cc} -c conftest.c -o conftest.o 1>&5'
-if { (eval echo configure:1392: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } &&
- test -f conftest.o && { (eval echo configure:1393: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; };
+if { (eval echo configure:1035: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } &&
+ test -f conftest.o && { (eval echo configure:1036: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; };
then
eval ac_cv_prog_cc_${ac_cc}_c_o=yes
if test "x$CC" != xcc; then
# Test first that cc exists at all.
- if { ac_try='cc -c conftest.c 1>&5'; { (eval echo configure:1398: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }; then
+ if { ac_try='cc -c conftest.c 1>&5'; { (eval echo configure:1041: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }; then
ac_try='cc -c conftest.c -o conftest.o 1>&5'
- if { (eval echo configure:1400: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } &&
- test -f conftest.o && { (eval echo configure:1401: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; };
+ if { (eval echo configure:1043: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } &&
+ test -f conftest.o && { (eval echo configure:1044: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; };
then
# cc works too.
:
fi
-# autoconf is lame and doesn't give us any substitution variable for this.
-if eval "test \"`echo '$ac_cv_prog_cc_'${ac_cc}_c_o`\" = no"; then
- NO_MINUS_C_MINUS_O=yes
-else
- OUTPUT_OPTION='-o $@'
-fi
+# autoconf is lame and doesn't give us any substitution variable for this.
+if eval "test \"`echo '$ac_cv_prog_cc_'${ac_cc}_c_o`\" = no"; then
+ NO_MINUS_C_MINUS_O=yes
+else
+ OUTPUT_OPTION='-o $@'
+fi
+
+
+
+# See if GNAT has been installed
+ac_aux_dir=
+for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
+ if test -f $ac_dir/install-sh; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install-sh -c"
+ break
+ elif test -f $ac_dir/install.sh; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install.sh -c"
+ break
+ fi
+done
+if test -z "$ac_aux_dir"; then
+ { echo "configure: error: can not find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." 1>&2; exit 1; }
+fi
+ac_config_guess=$ac_aux_dir/config.guess
+ac_config_sub=$ac_aux_dir/config.sub
+ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
+
+
+# Make sure we can run config.sub.
+if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
+else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
+fi
+
+echo $ac_n "checking host system type""... $ac_c" 1>&6
+echo "configure:1106: checking host system type" >&5
+
+host_alias=$host
+case "$host_alias" in
+NONE)
+ case $nonopt in
+ NONE)
+ if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
+ else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
+ fi ;;
+ *) host_alias=$nonopt ;;
+ esac ;;
+esac
+
+host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
+host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$host" 1>&6
+
+echo $ac_n "checking build system type""... $ac_c" 1>&6
+echo "configure:1127: checking build system type" >&5
+build_alias=$build
+case "$build_alias" in
+NONE)
+ case $nonopt in
+ NONE) build_alias=$host_alias ;;
+ *) build_alias=$nonopt ;;
+ esac ;;
+esac
+build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
+build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$build" 1>&6
-# See if GNAT has been installed
if test $host != $build; then
ac_tool_prefix=${host_alias}-
else
# Extract the first word of "${ac_tool_prefix}gnatbind", so it can be a program name with args.
set dummy ${ac_tool_prefix}gnatbind; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1447: checking for $ac_word" >&5
+echo "configure:1154: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_GNATBIND'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "gnatbind", so it can be a program name with args.
set dummy gnatbind; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1479: checking for $ac_word" >&5
+echo "configure:1186: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_GNATBIND'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking for compiler driver that understands Ada""... $ac_c" 1>&6
-echo "configure:1512: checking for compiler driver that understands Ada" >&5
+echo "configure:1219: checking for compiler driver that understands Ada" >&5
if eval "test \"`echo '$''{'gcc_cv_prog_adac'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo $ac_n "checking whether ${CC-cc} accepts -Wno-long-long""... $ac_c" 1>&6
-echo "configure:1557: checking whether ${CC-cc} accepts -Wno-long-long" >&5
+echo "configure:1264: checking whether ${CC-cc} accepts -Wno-long-long" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_no_long_long'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
save_CFLAGS="$CFLAGS"
CFLAGS="-Wno-long-long"
cat > conftest.$ac_ext <<EOF
-#line 1564 "configure"
+#line 1271 "configure"
#include "confdefs.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:1571: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1278: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_prog_cc_no_long_long=yes
else
if test x$have_gnat != xno ; then
echo $ac_n "checking whether ${ADAC} accepts -Wno-long-long""... $ac_c" 1>&6
-echo "configure:1588: checking whether ${ADAC} accepts -Wno-long-long" >&5
+echo "configure:1295: checking whether ${ADAC} accepts -Wno-long-long" >&5
if eval "test \"`echo '$''{'ac_cv_prog_adac_no_long_long'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:1616: checking how to run the C preprocessor" >&5
+echo "configure:1323: checking how to run the C preprocessor" >&5
# On Suns, sometimes $CPP names a directory.
if test -n "$CPP" && test -d "$CPP"; then
CPP=
# On the NeXT, cc -E runs the code through the compiler's parser,
# not just through cpp.
cat > conftest.$ac_ext <<EOF
-#line 1631 "configure"
+#line 1338 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1637: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1344: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
rm -rf conftest*
CPP="${CC-cc} -E -traditional-cpp"
cat > conftest.$ac_ext <<EOF
-#line 1648 "configure"
+#line 1355 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1654: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1361: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
rm -rf conftest*
CPP="${CC-cc} -nologo -E"
cat > conftest.$ac_ext <<EOF
-#line 1665 "configure"
+#line 1372 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1671: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1378: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
else
- echo "$ac_err" >&5
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ CPP=/lib/cpp
+fi
+rm -f conftest*
+fi
+rm -f conftest*
+fi
+rm -f conftest*
+ ac_cv_prog_CPP="$CPP"
+fi
+ CPP="$ac_cv_prog_CPP"
+else
+ ac_cv_prog_CPP="$CPP"
+fi
+echo "$ac_t""$CPP" 1>&6
+
+echo $ac_n "checking for inline""... $ac_c" 1>&6
+echo "configure:1403: checking for inline" >&5
+if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_cv_c_inline=no
+for ac_kw in inline __inline__ __inline; do
+ cat > conftest.$ac_ext <<EOF
+#line 1410 "configure"
+#include "confdefs.h"
+
+int main() {
+} $ac_kw foo() {
+; return 0; }
+EOF
+if { (eval echo configure:1417: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ ac_cv_c_inline=$ac_kw; break
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+fi
+rm -f conftest*
+done
+
+fi
+
+echo "$ac_t""$ac_cv_c_inline" 1>&6
+case "$ac_cv_c_inline" in
+ inline | yes) ;;
+ no) cat >> confdefs.h <<\EOF
+#define inline
+EOF
+ ;;
+ *) cat >> confdefs.h <<EOF
+#define inline $ac_cv_c_inline
+EOF
+ ;;
+esac
+
+echo $ac_n "checking for volatile""... $ac_c" 1>&6
+echo "configure:1443: checking for volatile" >&5
+if eval "test \"`echo '$''{'gcc_cv_c_volatile'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 1448 "configure"
+#include "confdefs.h"
+
+int main() {
+volatile int foo;
+; return 0; }
+EOF
+if { (eval echo configure:1455: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ gcc_cv_c_volatile=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ gcc_cv_c_volatile=no
+fi
+rm -f conftest*
+fi
+
+echo "$ac_t""$gcc_cv_c_volatile" 1>&6
+if test $gcc_cv_c_volatile = yes ; then
+ cat >> confdefs.h <<\EOF
+#define HAVE_VOLATILE 1
+EOF
+
+fi
+
+
+echo $ac_n "checking for long double""... $ac_c" 1>&6
+echo "configure:1477: checking for long double" >&5
+if eval "test \"`echo '$''{'gcc_cv_c_long_double'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test "$GCC" = yes; then
+ gcc_cv_c_long_double=yes
+else
+cat > conftest.$ac_ext <<EOF
+#line 1485 "configure"
+#include "confdefs.h"
+
+int main() {
+/* The Stardent Vistra knows sizeof(long double), but does not support it. */
+long double foo = 0.0;
+/* On Ultrix 4.3 cc, long double is 4 and double is 8. */
+switch (0) case 0: case (sizeof(long double) >= sizeof(double)):;
+; return 0; }
+EOF
+if { (eval echo configure:1495: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ gcc_cv_c_long_double=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ gcc_cv_c_long_double=no
+fi
+rm -f conftest*
+fi
+fi
+
+echo "$ac_t""$gcc_cv_c_long_double" 1>&6
+if test $gcc_cv_c_long_double = yes; then
+ cat >> confdefs.h <<\EOF
+#define HAVE_LONG_DOUBLE 1
+EOF
+
+fi
+
+echo $ac_n "checking for long long int""... $ac_c" 1>&6
+echo "configure:1517: checking for long long int" >&5
+if eval "test \"`echo '$''{'ac_cv_c_long_long'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 1522 "configure"
+#include "confdefs.h"
+
+int main() {
+long long int i;
+; return 0; }
+EOF
+if { (eval echo configure:1529: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ ac_cv_c_long_long=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ ac_cv_c_long_long=no
+fi
+rm -f conftest*
+fi
+
+echo "$ac_t""$ac_cv_c_long_long" 1>&6
+ if test $ac_cv_c_long_long = yes; then
+ cat >> confdefs.h <<\EOF
+#define HAVE_LONG_LONG 1
+EOF
+
+ fi
+echo $ac_n "checking for __int64""... $ac_c" 1>&6
+echo "configure:1549: checking for __int64" >&5
+if eval "test \"`echo '$''{'ac_cv_c___int64'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 1554 "configure"
+#include "confdefs.h"
+
+int main() {
+__int64 i;
+; return 0; }
+EOF
+if { (eval echo configure:1561: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ ac_cv_c___int64=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ ac_cv_c___int64=no
+fi
+rm -f conftest*
+fi
+
+echo "$ac_t""$ac_cv_c___int64" 1>&6
+ if test $ac_cv_c___int64 = yes; then
+ cat >> confdefs.h <<\EOF
+#define HAVE___INT64 1
+EOF
+
+ fi
+
+echo $ac_n "checking for built-in _Bool""... $ac_c" 1>&6
+echo "configure:1582: checking for built-in _Bool" >&5
+if eval "test \"`echo '$''{'gcc_cv_c__bool'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 1587 "configure"
+#include "confdefs.h"
+
+int main() {
+_Bool foo;
+; return 0; }
+EOF
+if { (eval echo configure:1594: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ gcc_cv_c__bool=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ gcc_cv_c__bool=no
+fi
+rm -f conftest*
+
+fi
+
+echo "$ac_t""$gcc_cv_c__bool" 1>&6
+if test $gcc_cv_c__bool = yes; then
+ cat >> confdefs.h <<\EOF
+#define HAVE__BOOL 1
+EOF
+
+fi
+
+
+# sizeof(char) is 1 by definition.
+echo $ac_n "checking size of short""... $ac_c" 1>&6
+echo "configure:1618: checking size of short" >&5
+if eval "test \"`echo '$''{'ac_cv_sizeof_short'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ for ac_size in 4 8 1 2 16 ; do # List sizes in rough order of prevalence.
+ cat > conftest.$ac_ext <<EOF
+#line 1624 "configure"
+#include "confdefs.h"
+#include "confdefs.h"
+#include <sys/types.h>
+
+
+int main() {
+switch (0) case 0: case (sizeof (short) == $ac_size):;
+; return 0; }
+EOF
+if { (eval echo configure:1634: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ ac_cv_sizeof_short=$ac_size
+else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
- rm -rf conftest*
- CPP=/lib/cpp
-fi
-rm -f conftest*
-fi
-rm -f conftest*
fi
rm -f conftest*
- ac_cv_prog_CPP="$CPP"
+ if test x$ac_cv_sizeof_short != x ; then break; fi
+done
+
fi
- CPP="$ac_cv_prog_CPP"
-else
- ac_cv_prog_CPP="$CPP"
+
+if test x$ac_cv_sizeof_short = x ; then
+ { echo "configure: error: cannot determine a size for short" 1>&2; exit 1; }
fi
-echo "$ac_t""$CPP" 1>&6
+echo "$ac_t""$ac_cv_sizeof_short" 1>&6
+cat >> confdefs.h <<EOF
+#define SIZEOF_SHORT $ac_cv_sizeof_short
+EOF
-echo $ac_n "checking for inline""... $ac_c" 1>&6
-echo "configure:1696: checking for inline" >&5
-if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then
+
+echo $ac_n "checking size of int""... $ac_c" 1>&6
+echo "configure:1657: checking size of int" >&5
+if eval "test \"`echo '$''{'ac_cv_sizeof_int'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- ac_cv_c_inline=no
-for ac_kw in inline __inline__ __inline; do
+ for ac_size in 4 8 1 2 16 ; do # List sizes in rough order of prevalence.
cat > conftest.$ac_ext <<EOF
-#line 1703 "configure"
+#line 1663 "configure"
#include "confdefs.h"
+#include "confdefs.h"
+#include <sys/types.h>
+
int main() {
-} $ac_kw foo() {
+switch (0) case 0: case (sizeof (int) == $ac_size):;
; return 0; }
EOF
-if { (eval echo configure:1710: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1673: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
- ac_cv_c_inline=$ac_kw; break
+ ac_cv_sizeof_int=$ac_size
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
fi
rm -f conftest*
+ if test x$ac_cv_sizeof_int != x ; then break; fi
done
fi
-echo "$ac_t""$ac_cv_c_inline" 1>&6
-case "$ac_cv_c_inline" in
- inline | yes) ;;
- no) cat >> confdefs.h <<\EOF
-#define inline
-EOF
- ;;
- *) cat >> confdefs.h <<EOF
-#define inline $ac_cv_c_inline
+if test x$ac_cv_sizeof_int = x ; then
+ { echo "configure: error: cannot determine a size for int" 1>&2; exit 1; }
+fi
+echo "$ac_t""$ac_cv_sizeof_int" 1>&6
+cat >> confdefs.h <<EOF
+#define SIZEOF_INT $ac_cv_sizeof_int
EOF
- ;;
-esac
-echo $ac_n "checking for volatile""... $ac_c" 1>&6
-echo "configure:1736: checking for volatile" >&5
-if eval "test \"`echo '$''{'gcc_cv_c_volatile'+set}'`\" = set"; then
+
+echo $ac_n "checking size of long""... $ac_c" 1>&6
+echo "configure:1696: checking size of long" >&5
+if eval "test \"`echo '$''{'ac_cv_sizeof_long'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
+ for ac_size in 4 8 1 2 16 ; do # List sizes in rough order of prevalence.
cat > conftest.$ac_ext <<EOF
-#line 1741 "configure"
+#line 1702 "configure"
+#include "confdefs.h"
#include "confdefs.h"
+#include <sys/types.h>
+
int main() {
-volatile int foo;
+switch (0) case 0: case (sizeof (long) == $ac_size):;
; return 0; }
EOF
-if { (eval echo configure:1748: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1712: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
- gcc_cv_c_volatile=yes
+ ac_cv_sizeof_long=$ac_size
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
- rm -rf conftest*
- gcc_cv_c_volatile=no
fi
rm -f conftest*
-fi
+ if test x$ac_cv_sizeof_long != x ; then break; fi
+done
-echo "$ac_t""$gcc_cv_c_volatile" 1>&6
-if test $gcc_cv_c_volatile = yes ; then
- cat >> confdefs.h <<\EOF
-#define HAVE_VOLATILE 1
-EOF
+fi
+if test x$ac_cv_sizeof_long = x ; then
+ { echo "configure: error: cannot determine a size for long" 1>&2; exit 1; }
fi
+echo "$ac_t""$ac_cv_sizeof_long" 1>&6
+cat >> confdefs.h <<EOF
+#define SIZEOF_LONG $ac_cv_sizeof_long
+EOF
-echo $ac_n "checking for long double""... $ac_c" 1>&6
-echo "configure:1770: checking for long double" >&5
-if eval "test \"`echo '$''{'gcc_cv_c_long_double'+set}'`\" = set"; then
+if test $ac_cv_c_long_long = yes; then
+ echo $ac_n "checking size of long long""... $ac_c" 1>&6
+echo "configure:1736: checking size of long long" >&5
+if eval "test \"`echo '$''{'ac_cv_sizeof_long_long'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test "$GCC" = yes; then
- gcc_cv_c_long_double=yes
-else
-cat > conftest.$ac_ext <<EOF
-#line 1778 "configure"
+ for ac_size in 4 8 1 2 16 ; do # List sizes in rough order of prevalence.
+ cat > conftest.$ac_ext <<EOF
+#line 1742 "configure"
#include "confdefs.h"
+#include "confdefs.h"
+#include <sys/types.h>
+
int main() {
-/* The Stardent Vistra knows sizeof(long double), but does not support it. */
-long double foo = 0.0;
-/* On Ultrix 4.3 cc, long double is 4 and double is 8. */
-switch (0) case 0: case (sizeof(long double) >= sizeof(double)):;
+switch (0) case 0: case (sizeof (long long) == $ac_size):;
; return 0; }
EOF
-if { (eval echo configure:1788: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1752: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
- gcc_cv_c_long_double=yes
+ ac_cv_sizeof_long_long=$ac_size
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
- rm -rf conftest*
- gcc_cv_c_long_double=no
fi
rm -f conftest*
-fi
+ if test x$ac_cv_sizeof_long_long != x ; then break; fi
+done
+
fi
-echo "$ac_t""$gcc_cv_c_long_double" 1>&6
-if test $gcc_cv_c_long_double = yes; then
- cat >> confdefs.h <<\EOF
-#define HAVE_LONG_DOUBLE 1
+if test x$ac_cv_sizeof_long_long = x ; then
+ { echo "configure: error: cannot determine a size for long long" 1>&2; exit 1; }
+fi
+echo "$ac_t""$ac_cv_sizeof_long_long" 1>&6
+cat >> confdefs.h <<EOF
+#define SIZEOF_LONG_LONG $ac_cv_sizeof_long_long
EOF
-fi
-echo $ac_n "checking for long long int""... $ac_c" 1>&6
-echo "configure:1810: checking for long long int" >&5
-if eval "test \"`echo '$''{'ac_cv_c_long_long'+set}'`\" = set"; then
+fi
+if test $ac_cv_c___int64 = yes; then
+ echo $ac_n "checking size of __int64""... $ac_c" 1>&6
+echo "configure:1777: checking size of __int64" >&5
+if eval "test \"`echo '$''{'ac_cv_sizeof___int64'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
+ for ac_size in 4 8 1 2 16 ; do # List sizes in rough order of prevalence.
cat > conftest.$ac_ext <<EOF
-#line 1815 "configure"
+#line 1783 "configure"
#include "confdefs.h"
+#include "confdefs.h"
+#include <sys/types.h>
+
int main() {
-long long int i;
+switch (0) case 0: case (sizeof (__int64) == $ac_size):;
; return 0; }
EOF
-if { (eval echo configure:1822: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1793: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
- ac_cv_c_long_long=yes
+ ac_cv_sizeof___int64=$ac_size
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
- rm -rf conftest*
- ac_cv_c_long_long=no
fi
rm -f conftest*
+ if test x$ac_cv_sizeof___int64 != x ; then break; fi
+done
+
fi
-echo "$ac_t""$ac_cv_c_long_long" 1>&6
- if test $ac_cv_c_long_long = yes; then
- cat >> confdefs.h <<\EOF
-#define HAVE_LONG_LONG 1
+if test x$ac_cv_sizeof___int64 = x ; then
+ { echo "configure: error: cannot determine a size for __int64" 1>&2; exit 1; }
+fi
+echo "$ac_t""$ac_cv_sizeof___int64" 1>&6
+cat >> confdefs.h <<EOF
+#define SIZEOF___INT64 $ac_cv_sizeof___int64
EOF
- fi
-echo $ac_n "checking for __int64""... $ac_c" 1>&6
-echo "configure:1842: checking for __int64" >&5
-if eval "test \"`echo '$''{'ac_cv_c___int64'+set}'`\" = set"; then
+
+fi
+
+echo $ac_n "checking execution character set""... $ac_c" 1>&6
+echo "configure:1818: checking execution character set" >&5
+if eval "test \"`echo '$''{'ac_cv_c_charset'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1847 "configure"
+#line 1823 "configure"
#include "confdefs.h"
+#if '\n' == 0x0A && ' ' == 0x20 && '0' == 0x30 \
+ && 'A' == 0x41 && 'a' == 0x61 && '!' == 0x21
+ASCII
+#endif
+EOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ egrep "ASCII" >/dev/null 2>&1; then
+ rm -rf conftest*
+ ac_cv_c_charset=ASCII
+fi
+rm -f conftest*
-int main() {
-__int64 i;
-; return 0; }
+ if test x${ac_cv_c_charset+set} != xset; then
+ cat > conftest.$ac_ext <<EOF
+#line 1839 "configure"
+#include "confdefs.h"
+#if '\n' == 0x15 && ' ' == 0x40 && '0' == 0xF0 \
+ && 'A' == 0xC1 && 'a' == 0x81 && '!' == 0x5A
+EBCDIC
+#endif
EOF
-if { (eval echo configure:1854: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ egrep "EBCDIC" >/dev/null 2>&1; then
rm -rf conftest*
- ac_cv_c___int64=yes
+ ac_cv_c_charset=EBCDIC
+fi
+rm -f conftest*
+
+ fi
+ if test x${ac_cv_c_charset+set} != xset; then
+ ac_cv_c_charset=unknown
+ fi
+fi
+
+echo "$ac_t""$ac_cv_c_charset" 1>&6
+if test $ac_cv_c_charset = unknown; then
+ { echo "configure: error: *** Cannot determine host character set." 1>&2; exit 1; }
+elif test $ac_cv_c_charset = EBCDIC; then
+ cat >> confdefs.h <<\EOF
+#define HOST_EBCDIC 1
+EOF
+
+fi
+
+# If the native compiler is GCC, we can enable warnings even in stage1.
+# That's useful for people building cross-compilers, or just running a
+# quick `make'.
+warn_cflags=
+if test "x$GCC" = "xyes"; then
+ warn_cflags='$(GCC_WARN_CFLAGS)'
+fi
+
+
+# Determine whether or not multilibs are enabled.
+# Check whether --enable-multilib or --disable-multilib was given.
+if test "${enable_multilib+set}" = set; then
+ enableval="$enable_multilib"
+ :
+else
+ enable_multilib=yes
+fi
+
+
+
+# Enable expensive internal checks
+# Check whether --enable-checking or --disable-checking was given.
+if test "${enable_checking+set}" = set; then
+ enableval="$enable_checking"
+ ac_checking=
+ac_tree_checking=
+ac_rtl_checking=
+ac_rtlflag_checking=
+ac_gc_checking=
+ac_gc_always_collect=
+case "${enableval}" in
+yes) ac_checking=1 ; ac_tree_checking=1 ; ac_gc_checking=1 ;
+ ac_rtlflag_checking=1 ;;
+no) ;;
+*) IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS="$IFS,"
+ set fnord $enableval; shift
+ IFS="$ac_save_IFS"
+ for check
+ do
+ case $check in
+ misc) ac_checking=1 ;;
+ tree) ac_tree_checking=1 ;;
+ rtlflag) ac_rtlflag_checking=1 ;;
+ rtl) ac_rtl_checking=1 ;;
+ gc) ac_gc_checking=1 ;;
+ gcac) ac_gc_always_collect=1 ;;
+ valgrind) ac_checking_valgrind=1 ;;
+ *) { echo "configure: error: unknown check category $check" 1>&2; exit 1; } ;;
+ esac
+ done
+ ;;
+esac
+
else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- ac_cv_c___int64=no
-fi
-rm -f conftest*
+ # Enable some checks by default for development versions of GCC
+ac_checking=1; ac_tree_checking=1; ac_gc_checking=1; ac_rtlflag_checking=1;
fi
-echo "$ac_t""$ac_cv_c___int64" 1>&6
- if test $ac_cv_c___int64 = yes; then
- cat >> confdefs.h <<\EOF
-#define HAVE___INT64 1
+nocommon_flag=""
+if test x$ac_checking != x ; then
+ cat >> confdefs.h <<\EOF
+#define ENABLE_CHECKING 1
EOF
- fi
-
-echo $ac_n "checking for built-in _Bool""... $ac_c" 1>&6
-echo "configure:1875: checking for built-in _Bool" >&5
-if eval "test \"`echo '$''{'gcc_cv_c__bool'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 1880 "configure"
-#include "confdefs.h"
+ nocommon_flag=-fno-common
+fi
-int main() {
-_Bool foo;
-; return 0; }
+if test x$ac_tree_checking != x ; then
+ cat >> confdefs.h <<\EOF
+#define ENABLE_TREE_CHECKING 1
EOF
-if { (eval echo configure:1887: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- rm -rf conftest*
- gcc_cv_c__bool=yes
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- gcc_cv_c__bool=no
-fi
-rm -f conftest*
fi
+if test x$ac_rtl_checking != x ; then
+ cat >> confdefs.h <<\EOF
+#define ENABLE_RTL_CHECKING 1
+EOF
-echo "$ac_t""$gcc_cv_c__bool" 1>&6
-if test $gcc_cv_c__bool = yes; then
+fi
+if test x$ac_rtlflag_checking != x ; then
cat >> confdefs.h <<\EOF
-#define HAVE__BOOL 1
+#define ENABLE_RTL_FLAG_CHECKING 1
EOF
fi
+if test x$ac_gc_checking != x ; then
+ cat >> confdefs.h <<\EOF
+#define ENABLE_GC_CHECKING 1
+EOF
+fi
+if test x$ac_gc_always_collect != x ; then
+ cat >> confdefs.h <<\EOF
+#define ENABLE_GC_ALWAYS_COLLECT 1
+EOF
-# sizeof(char) is 1 by definition.
-echo $ac_n "checking size of short""... $ac_c" 1>&6
-echo "configure:1911: checking size of short" >&5
-if eval "test \"`echo '$''{'ac_cv_sizeof_short'+set}'`\" = set"; then
+fi
+valgrind_path_defines=
+valgrind_command=
+if test x$ac_checking_valgrind != x ; then
+ # It is certainly possible that there's valgrind but no valgrind.h.
+ # GCC relies on making annotations so we must have both.
+ ac_safe=`echo "valgrind.h" | sed 'y%./+-%__p_%'`
+echo $ac_n "checking for valgrind.h""... $ac_c" 1>&6
+echo "configure:1973: checking for valgrind.h" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- for ac_size in 4 8 1 2 16 ; do # List sizes in rough order of prevalence.
cat > conftest.$ac_ext <<EOF
-#line 1917 "configure"
+#line 1978 "configure"
#include "confdefs.h"
-#include "confdefs.h"
-#include <sys/types.h>
-
-
-int main() {
-switch (0) case 0: case (sizeof (short) == $ac_size):;
-; return 0; }
+#include <valgrind.h>
EOF
-if { (eval echo configure:1927: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:1983: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
rm -rf conftest*
- ac_cv_sizeof_short=$ac_size
+ eval "ac_cv_header_$ac_safe=yes"
else
+ echo "$ac_err" >&5
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=no"
fi
rm -f conftest*
- if test x$ac_cv_sizeof_short != x ; then break; fi
-done
-
+fi
+if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ have_valgrind_h=yes
+else
+ echo "$ac_t""no" 1>&6
+have_valgrind_h=no
fi
-if test x$ac_cv_sizeof_short = x ; then
- { echo "configure: error: cannot determine a size for short" 1>&2; exit 1; }
+ # Extract the first word of "valgrind", so it can be a program name with args.
+set dummy valgrind; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:2008: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_valgrind_path'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ case "$valgrind_path" in
+ /*)
+ ac_cv_path_valgrind_path="$valgrind_path" # Let the user override the test with a path.
+ ;;
+ *)
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+ for ac_dir in $PATH; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ if $ac_dir/$ac_word --version | grep valgrind- >/dev/null 2>&1; then
+ ac_cv_path_valgrind_path="$ac_dir/$ac_word"
+ break
+ fi
+ fi
+ done
+ IFS="$ac_save_ifs"
+ ;;
+esac
fi
-echo "$ac_t""$ac_cv_sizeof_short" 1>&6
-cat >> confdefs.h <<EOF
-#define SIZEOF_SHORT $ac_cv_sizeof_short
+valgrind_path="$ac_cv_path_valgrind_path"
+if test -n "$valgrind_path"; then
+ echo "$ac_t""$valgrind_path" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ if test "x$valgrind_path" = "x" || test $have_valgrind_h = no; then
+ { echo "configure: error: *** Can't find both valgrind and valgrind.h" 1>&2; exit 1; }
+ fi
+ valgrind_path_defines=-DVALGRIND_PATH='\"'$valgrind_path'\"'
+ valgrind_command="$valgrind_path -q"
+ cat >> confdefs.h <<\EOF
+#define ENABLE_VALGRIND_CHECKING 1
EOF
+fi
-echo $ac_n "checking size of int""... $ac_c" 1>&6
-echo "configure:1950: checking size of int" >&5
-if eval "test \"`echo '$''{'ac_cv_sizeof_int'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- for ac_size in 4 8 1 2 16 ; do # List sizes in rough order of prevalence.
- cat > conftest.$ac_ext <<EOF
-#line 1956 "configure"
-#include "confdefs.h"
-#include "confdefs.h"
-#include <sys/types.h>
-int main() {
-switch (0) case 0: case (sizeof (int) == $ac_size):;
-; return 0; }
-EOF
-if { (eval echo configure:1966: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- rm -rf conftest*
- ac_cv_sizeof_int=$ac_size
+# Enable code coverage collection
+# Check whether --enable-coverage or --disable-coverage was given.
+if test "${enable_coverage+set}" = set; then
+ enableval="$enable_coverage"
+ case "${enableval}" in
+yes|noopt)
+ coverage_flags="-fprofile-arcs -ftest-coverage -O0"
+ ;;
+opt)
+ coverage_flags="-fprofile-arcs -ftest-coverage -O2"
+ ;;
+*)
+ { echo "configure: error: unknown coverage setting $enableval" 1>&2; exit 1; }
+ ;;
+esac
else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
+ coverage_flags=""
fi
-rm -f conftest*
- if test x$ac_cv_sizeof_int != x ; then break; fi
-done
-fi
-if test x$ac_cv_sizeof_int = x ; then
- { echo "configure: error: cannot determine a size for int" 1>&2; exit 1; }
+
+# Check whether --with-cpp_install_dir or --without-cpp_install_dir was given.
+if test "${with_cpp_install_dir+set}" = set; then
+ withval="$with_cpp_install_dir"
+ if test x$withval = xyes; then
+ { echo "configure: error: option --with-cpp-install-dir requires an argument" 1>&2; exit 1; }
+elif test x$withval != xno; then
+ cpp_install_dir=$withval
+fi
fi
-echo "$ac_t""$ac_cv_sizeof_int" 1>&6
-cat >> confdefs.h <<EOF
-#define SIZEOF_INT $ac_cv_sizeof_int
-EOF
-echo $ac_n "checking size of long""... $ac_c" 1>&6
-echo "configure:1989: checking size of long" >&5
-if eval "test \"`echo '$''{'ac_cv_sizeof_long'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- for ac_size in 4 8 1 2 16 ; do # List sizes in rough order of prevalence.
- cat > conftest.$ac_ext <<EOF
-#line 1995 "configure"
-#include "confdefs.h"
-#include "confdefs.h"
-#include <sys/types.h>
+# Enable __cxa_atexit for C++.
+# Check whether --enable-__cxa_atexit or --disable-__cxa_atexit was given.
+if test "${enable___cxa_atexit+set}" = set; then
+ enableval="$enable___cxa_atexit"
+ :
+fi
+if test x$enable___cxa_atexit = xyes; then
+ cat >> confdefs.h <<\EOF
+#define DEFAULT_USE_CXA_ATEXIT 1
+EOF
-int main() {
-switch (0) case 0: case (sizeof (long) == $ac_size):;
-; return 0; }
+fi
+
+# Enable Multibyte Characters for C/C++
+# Check whether --enable-c-mbchar or --disable-c-mbchar was given.
+if test "${enable_c_mbchar+set}" = set; then
+ enableval="$enable_c_mbchar"
+ if test x$enable_c_mbchar != xno; then
+ cat >> confdefs.h <<\EOF
+#define MULTIBYTE_CHARS 1
EOF
-if { (eval echo configure:2005: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- rm -rf conftest*
- ac_cv_sizeof_long=$ac_size
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
+
+fi
fi
-rm -f conftest*
- if test x$ac_cv_sizeof_long != x ; then break; fi
-done
+
+# Enable threads
+# Pass with no value to take the default
+# Pass with a value to specify a thread package
+# Check whether --enable-threads or --disable-threads was given.
+if test "${enable_threads+set}" = set; then
+ enableval="$enable_threads"
+ :
+else
+ enable_threads=''
fi
-if test x$ac_cv_sizeof_long = x ; then
- { echo "configure: error: cannot determine a size for long" 1>&2; exit 1; }
+
+enable_threads_flag=$enable_threads
+# Check if a valid thread package
+case x${enable_threads_flag} in
+ x | xno)
+ # No threads
+ target_thread_file='single'
+ ;;
+ xyes)
+ # default
+ target_thread_file=''
+ ;;
+ xdecosf1 | xirix | xmach | xos2 | xposix | xpthreads | xsingle | \
+ xsolaris | xwin32 | xdce | xrtems| xvxworks | xaix)
+ target_thread_file=$enable_threads_flag
+ ;;
+ *)
+ echo "$enable_threads is an unknown thread package" 1>&2
+ exit 1
+ ;;
+esac
+
+# Check whether --enable-objc-gc or --disable-objc-gc was given.
+if test "${enable_objc_gc+set}" = set; then
+ enableval="$enable_objc_gc"
+ if test x$enable_objc_gc = xno; then
+ objc_boehm_gc=''
+else
+ objc_boehm_gc=1
+fi
+else
+ objc_boehm_gc=''
fi
-echo "$ac_t""$ac_cv_sizeof_long" 1>&6
-cat >> confdefs.h <<EOF
-#define SIZEOF_LONG $ac_cv_sizeof_long
-EOF
-if test $ac_cv_c_long_long = yes; then
- echo $ac_n "checking size of long long""... $ac_c" 1>&6
-echo "configure:2029: checking size of long long" >&5
-if eval "test \"`echo '$''{'ac_cv_sizeof_long_long'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
+# Check whether --with-dwarf2 or --without-dwarf2 was given.
+if test "${with_dwarf2+set}" = set; then
+ withval="$with_dwarf2"
+ dwarf2="$with_dwarf2"
else
- for ac_size in 4 8 1 2 16 ; do # List sizes in rough order of prevalence.
- cat > conftest.$ac_ext <<EOF
-#line 2035 "configure"
-#include "confdefs.h"
-#include "confdefs.h"
-#include <sys/types.h>
+ dwarf2=no
+fi
-int main() {
-switch (0) case 0: case (sizeof (long long) == $ac_size):;
-; return 0; }
-EOF
-if { (eval echo configure:2045: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- rm -rf conftest*
- ac_cv_sizeof_long_long=$ac_size
+# Check whether --enable-shared or --disable-shared was given.
+if test "${enable_shared+set}" = set; then
+ enableval="$enable_shared"
+
+ case $enable_shared in
+ yes | no) ;;
+ *)
+ enable_shared=no
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
+ for pkg in $enableval; do
+ if test "X$pkg" = "Xgcc" || test "X$pkg" = "Xlibgcc"; then
+ enable_shared=yes
+ fi
+ done
+ IFS="$ac_save_ifs"
+ ;;
+ esac
+
else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
+ enable_shared=yes
fi
-rm -f conftest*
- if test x$ac_cv_sizeof_long_long != x ; then break; fi
-done
-fi
-if test x$ac_cv_sizeof_long_long = x ; then
- { echo "configure: error: cannot determine a size for long long" 1>&2; exit 1; }
-fi
-echo "$ac_t""$ac_cv_sizeof_long_long" 1>&6
-cat >> confdefs.h <<EOF
-#define SIZEOF_LONG_LONG $ac_cv_sizeof_long_long
-EOF
+# Determine the host, build, and target systems
-fi
-if test $ac_cv_c___int64 = yes; then
- echo $ac_n "checking size of __int64""... $ac_c" 1>&6
-echo "configure:2070: checking size of __int64" >&5
-if eval "test \"`echo '$''{'ac_cv_sizeof___int64'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- for ac_size in 4 8 1 2 16 ; do # List sizes in rough order of prevalence.
- cat > conftest.$ac_ext <<EOF
-#line 2076 "configure"
-#include "confdefs.h"
-#include "confdefs.h"
-#include <sys/types.h>
+# Do some error checking and defaulting for the host and target type.
+# The inputs are:
+# configure --host=HOST --target=TARGET --build=BUILD NONOPT
+#
+# The rules are:
+# 1. You are not allowed to specify --host, --target, and nonopt at the
+# same time.
+# 2. Host defaults to nonopt.
+# 3. If nonopt is not specified, then host defaults to the current host,
+# as determined by config.guess.
+# 4. Target and build default to nonopt.
+# 5. If nonopt is not specified, then target and build default to host.
+# The aliases save the names the user supplied, while $host etc.
+# will get canonicalized.
+case $host---$target---$nonopt in
+NONE---*---* | *---NONE---* | *---*---NONE) ;;
+*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
+esac
-int main() {
-switch (0) case 0: case (sizeof (__int64) == $ac_size):;
-; return 0; }
-EOF
-if { (eval echo configure:2086: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- rm -rf conftest*
- ac_cv_sizeof___int64=$ac_size
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
-fi
-rm -f conftest*
- if test x$ac_cv_sizeof___int64 != x ; then break; fi
-done
+# Make sure we can run config.sub.
+if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
+else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
fi
-if test x$ac_cv_sizeof___int64 = x ; then
- { echo "configure: error: cannot determine a size for __int64" 1>&2; exit 1; }
-fi
-echo "$ac_t""$ac_cv_sizeof___int64" 1>&6
-cat >> confdefs.h <<EOF
-#define SIZEOF___INT64 $ac_cv_sizeof___int64
-EOF
+echo $ac_n "checking host system type""... $ac_c" 1>&6
+echo "configure:2218: checking host system type" >&5
+host_alias=$host
+case "$host_alias" in
+NONE)
+ case $nonopt in
+ NONE)
+ if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
+ else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
+ fi ;;
+ *) host_alias=$nonopt ;;
+ esac ;;
+esac
-fi
+host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
+host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$host" 1>&6
-echo $ac_n "checking execution character set""... $ac_c" 1>&6
-echo "configure:2111: checking execution character set" >&5
-if eval "test \"`echo '$''{'ac_cv_c_charset'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 2116 "configure"
-#include "confdefs.h"
-#if '\n' == 0x0A && ' ' == 0x20 && '0' == 0x30 \
- && 'A' == 0x41 && 'a' == 0x61 && '!' == 0x21
-ASCII
-#endif
-EOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- egrep "ASCII" >/dev/null 2>&1; then
- rm -rf conftest*
- ac_cv_c_charset=ASCII
-fi
-rm -f conftest*
+echo $ac_n "checking target system type""... $ac_c" 1>&6
+echo "configure:2239: checking target system type" >&5
- if test x${ac_cv_c_charset+set} != xset; then
- cat > conftest.$ac_ext <<EOF
-#line 2132 "configure"
-#include "confdefs.h"
-#if '\n' == 0x15 && ' ' == 0x40 && '0' == 0xF0 \
- && 'A' == 0xC1 && 'a' == 0x81 && '!' == 0x5A
-EBCDIC
-#endif
-EOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- egrep "EBCDIC" >/dev/null 2>&1; then
- rm -rf conftest*
- ac_cv_c_charset=EBCDIC
-fi
-rm -f conftest*
+target_alias=$target
+case "$target_alias" in
+NONE)
+ case $nonopt in
+ NONE) target_alias=$host_alias ;;
+ *) target_alias=$nonopt ;;
+ esac ;;
+esac
- fi
- if test x${ac_cv_c_charset+set} != xset; then
- ac_cv_c_charset=unknown
- fi
-fi
+target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
+target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$target" 1>&6
-echo "$ac_t""$ac_cv_c_charset" 1>&6
-if test $ac_cv_c_charset = unknown; then
- { echo "configure: error: *** Cannot determine host character set." 1>&2; exit 1; }
-elif test $ac_cv_c_charset = EBCDIC; then
- cat >> confdefs.h <<\EOF
-#define HOST_EBCDIC 1
-EOF
+echo $ac_n "checking build system type""... $ac_c" 1>&6
+echo "configure:2257: checking build system type" >&5
-fi
+build_alias=$build
+case "$build_alias" in
+NONE)
+ case $nonopt in
+ NONE) build_alias=$host_alias ;;
+ *) build_alias=$nonopt ;;
+ esac ;;
+esac
-# If the native compiler is GCC, we can enable warnings even in stage1.
-# That's useful for people building cross-compilers, or just running a
-# quick `make'.
-warn_cflags=
-if test "x$GCC" = "xyes"; then
- warn_cflags='$(GCC_WARN_CFLAGS)'
+build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
+build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$build" 1>&6
+
+test "$host_alias" != "$target_alias" &&
+ test "$program_prefix$program_suffix$program_transform_name" = \
+ NONENONEs,x,x, &&
+ program_prefix=${target_alias}-
+
+
+# Set program_transform_name
+if test "$program_transform_name" = s,x,x,; then
+ program_transform_name=
+else
+ # Double any \ or $. echo might interpret backslashes.
+ cat <<\EOF_SED > conftestsed
+s,\\,\\\\,g; s,\$,$$,g
+EOF_SED
+ program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
+ rm -f conftestsed
fi
+test "$program_prefix" != NONE &&
+ program_transform_name="s,^,${program_prefix},; $program_transform_name"
+# Use a double $ so make ignores it.
+test "$program_suffix" != NONE &&
+ program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
+
+# sed with no file args requires a program.
+test "$program_transform_name" = "" && program_transform_name="s,x,x,"
# Stage specific cflags for build.
echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:2193: checking whether ${MAKE-make} sets \${MAKE}" >&5
+echo "configure:2323: checking whether ${MAKE-make} sets \${MAKE}" >&5
set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
echo $ac_n "checking whether a default assembler was specified""... $ac_c" 1>&6
-echo "configure:2221: checking whether a default assembler was specified" >&5
+echo "configure:2351: checking whether a default assembler was specified" >&5
if test x"${DEFAULT_ASSEMBLER+set}" = x"set"; then
if test x"$gas_flag" = x"no"; then
echo "$ac_t""yes ($DEFAULT_ASSEMBLER)" 1>&6
fi
echo $ac_n "checking whether a default linker was specified""... $ac_c" 1>&6
-echo "configure:2233: checking whether a default linker was specified" >&5
+echo "configure:2363: checking whether a default linker was specified" >&5
if test x"${DEFAULT_LINKER+set}" = x"set"; then
if test x"$gnu_ld_flag" = x"no"; then
echo "$ac_t""yes ($DEFAULT_LINKER)" 1>&6
fi
echo $ac_n "checking for GNU C library""... $ac_c" 1>&6
-echo "configure:2245: checking for GNU C library" >&5
+echo "configure:2375: checking for GNU C library" >&5
if eval "test \"`echo '$''{'gcc_cv_glibc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2250 "configure"
+#line 2380 "configure"
#include "confdefs.h"
#include <features.h>
int main() {
#endif
; return 0; }
EOF
-if { (eval echo configure:2260: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2390: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
gcc_cv_glibc=yes
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2286: checking for $ac_word" >&5
+echo "configure:2416: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AWK'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
done
echo $ac_n "checking whether ln works""... $ac_c" 1>&6
-echo "configure:2316: checking whether ln works" >&5
+echo "configure:2446: checking whether ln works" >&5
if eval "test \"`echo '$''{'gcc_cv_prog_LN'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:2348: checking whether ln -s works" >&5
+echo "configure:2478: checking whether ln -s works" >&5
if eval "test \"`echo '$''{'gcc_cv_prog_LN_S'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2382: checking for $ac_word" >&5
+echo "configure:2512: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:2420: checking for a BSD compatible install" >&5
+echo "configure:2550: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
-echo "configure:2471: checking for ANSI C header files" >&5
+echo "configure:2601: checking for ANSI C header files" >&5
if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2476 "configure"
+#line 2606 "configure"
#include "confdefs.h"
#include <stdlib.h>
#include <stdarg.h>
#include <float.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2484: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2614: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
if test $ac_cv_header_stdc = yes; then
# SunOS 4.x string.h does not declare mem*, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
-#line 2501 "configure"
+#line 2631 "configure"
#include "confdefs.h"
#include <string.h>
EOF
if test $ac_cv_header_stdc = yes; then
# ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
-#line 2519 "configure"
+#line 2649 "configure"
#include "confdefs.h"
#include <stdlib.h>
EOF
:
else
cat > conftest.$ac_ext <<EOF
-#line 2540 "configure"
+#line 2670 "configure"
#include "confdefs.h"
#include <ctype.h>
#define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
exit (0); }
EOF
-if { (eval echo configure:2551: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2681: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
:
else
fi
echo $ac_n "checking whether time.h and sys/time.h may both be included""... $ac_c" 1>&6
-echo "configure:2575: checking whether time.h and sys/time.h may both be included" >&5
+echo "configure:2705: checking whether time.h and sys/time.h may both be included" >&5
if eval "test \"`echo '$''{'ac_cv_header_time'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2580 "configure"
+#line 2710 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/time.h>
struct tm *tp;
; return 0; }
EOF
-if { (eval echo configure:2589: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2719: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_header_time=yes
else
fi
echo $ac_n "checking for working stdbool.h""... $ac_c" 1>&6
-echo "configure:2610: checking for working stdbool.h" >&5
+echo "configure:2740: checking for working stdbool.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_stdbool_h'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2615 "configure"
+#line 2745 "configure"
#include "confdefs.h"
#include <stdbool.h>
int main() {
bool foo = false;
; return 0; }
EOF
-if { (eval echo configure:2622: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2752: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_header_stdbool_h=yes
else
fi
echo $ac_n "checking whether string.h and strings.h may both be included""... $ac_c" 1>&6
-echo "configure:2643: checking whether string.h and strings.h may both be included" >&5
+echo "configure:2773: checking whether string.h and strings.h may both be included" >&5
if eval "test \"`echo '$''{'gcc_cv_header_string'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2648 "configure"
+#line 2778 "configure"
#include "confdefs.h"
#include <string.h>
#include <strings.h>
; return 0; }
EOF
-if { (eval echo configure:2656: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2786: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
gcc_cv_header_string=yes
else
fi
echo $ac_n "checking for sys/wait.h that is POSIX.1 compatible""... $ac_c" 1>&6
-echo "configure:2677: checking for sys/wait.h that is POSIX.1 compatible" >&5
+echo "configure:2807: checking for sys/wait.h that is POSIX.1 compatible" >&5
if eval "test \"`echo '$''{'ac_cv_header_sys_wait_h'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2682 "configure"
+#line 2812 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/wait.h>
s = WIFEXITED (s) ? WEXITSTATUS (s) : 1;
; return 0; }
EOF
-if { (eval echo configure:2698: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2828: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_header_sys_wait_h=yes
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:2725: checking for $ac_hdr" >&5
+echo "configure:2855: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2730 "configure"
+#line 2860 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2735: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2865: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
# Check for thread headers.
ac_safe=`echo "thread.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for thread.h""... $ac_c" 1>&6
-echo "configure:2765: checking for thread.h" >&5
+echo "configure:2895: checking for thread.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2770 "configure"
+#line 2900 "configure"
#include "confdefs.h"
#include <thread.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2775: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2905: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
ac_safe=`echo "pthread.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for pthread.h""... $ac_c" 1>&6
-echo "configure:2799: checking for pthread.h" >&5
+echo "configure:2929: checking for pthread.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2804 "configure"
+#line 2934 "configure"
#include "confdefs.h"
#include <pthread.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2809: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2939: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
# These tests can't be done till we know if we have limits.h.
echo $ac_n "checking for CHAR_BIT""... $ac_c" 1>&6
-echo "configure:2834: checking for CHAR_BIT" >&5
+echo "configure:2964: checking for CHAR_BIT" >&5
if eval "test \"`echo '$''{'gcc_cv_decl_char_bit'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2839 "configure"
+#line 2969 "configure"
#include "confdefs.h"
#ifdef HAVE_LIMITS_H
#include <limits.h>
echo "$ac_t""$gcc_cv_decl_char_bit" 1>&6
if test $gcc_cv_decl_char_bit = no; then
echo $ac_n "checking number of bits in a byte""... $ac_c" 1>&6
-echo "configure:2864: checking number of bits in a byte" >&5
+echo "configure:2994: checking number of bits in a byte" >&5
if eval "test \"`echo '$''{'gcc_cv_c_nbby'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
gcc_cv_c_nbby=
while test $i -lt 65; do
cat > conftest.$ac_ext <<EOF
-#line 2872 "configure"
+#line 3002 "configure"
#include "confdefs.h"
int main() {
; }
; return 0; }
EOF
-if { (eval echo configure:2882: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3012: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
gcc_cv_c_nbby=$i; break
else
fi
fi
echo $ac_n "checking byte ordering""... $ac_c" 1>&6
-echo "configure:2907: checking byte ordering" >&5
+echo "configure:3037: checking byte ordering" >&5
if eval "test \"`echo '$''{'ac_cv_c_compile_endian'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cross_compiling=$ac_cv_prog_cc_cross
cat > conftest.$ac_ext <<EOF
-#line 2921 "configure"
+#line 3051 "configure"
#include "confdefs.h"
#ifdef HAVE_LIMITS_H
'X', '\n'
};
EOF
-if { (eval echo configure:2941: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3071: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
od -c conftest.o |
sed 's/^[0-7]*[ ]*/ /
s/\*/./g
fi
echo $ac_n "checking floating point format""... $ac_c" 1>&6
-echo "configure:2980: checking floating point format" >&5
+echo "configure:3110: checking floating point format" >&5
if eval "test \"`echo '$''{'ac_cv_c_float_format'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cross_compiling=$ac_cv_prog_cc_cross
cat > conftest.$ac_ext <<EOF
-#line 2993 "configure"
+#line 3123 "configure"
#include "confdefs.h"
/* This will not work unless sizeof(double) == 8. */
extern char sizeof_double_must_be_8 [sizeof(double) == 8 ? 1 : -1];
C(-5.22995989424860458374e+10) /* IBMHEXFP - s/390 format, EBCDIC */
};
EOF
-if { (eval echo configure:3015: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3145: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
od -c conftest.o |
sed 's/^[0-7]*[ ]*/ /
s/\*/./g
# Extract the first word of "mktemp", so it can be a program name with args.
set dummy mktemp; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3104: checking for $ac_word" >&5
+echo "configure:3234: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_have_mktemp_command'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "makeinfo", so it can be a program name with args.
set dummy makeinfo; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3143: checking for $ac_word" >&5
+echo "configure:3273: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_MAKEINFO'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$MAKEINFO"; then
# Found it, now check the version.
echo $ac_n "checking for modern makeinfo""... $ac_c" 1>&6
-echo "configure:3172: checking for modern makeinfo" >&5
+echo "configure:3302: checking for modern makeinfo" >&5
if eval "test \"`echo '$''{'gcc_cv_prog_makeinfo_modern'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_prog_version=`$MAKEINFO --version 2>&1 |
sed -n 's/^.*GNU texinfo.* \([0-9][0-9.]*\).*$/\1/p'`
- echo "configure:3178: version of makeinfo is $ac_prog_version" >&5
+ echo "configure:3308: version of makeinfo is $ac_prog_version" >&5
case $ac_prog_version in
'') gcc_cv_prog_makeinfo_modern=no;;
4.[1-9]*)
# Is pod2man recent enough to regenerate manpages?
echo $ac_n "checking for recent Pod::Man""... $ac_c" 1>&6
-echo "configure:3206: checking for recent Pod::Man" >&5
+echo "configure:3336: checking for recent Pod::Man" >&5
if (perl -e 'use 1.10 Pod::Man') >/dev/null 2>&1; then
echo "$ac_t""yes" 1>&6
GENERATED_MANPAGES=generated-manpages
# Extract the first word of "flex", so it can be a program name with args.
set dummy flex; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3222: checking for $ac_word" >&5
+echo "configure:3352: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_FLEX'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "bison", so it can be a program name with args.
set dummy bison; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3259: checking for $ac_word" >&5
+echo "configure:3389: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_BISON'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# These libraries may be used by collect2.
# We may need a special search path to get them linked.
echo $ac_n "checking for collect2 libraries""... $ac_c" 1>&6
-echo "configure:3291: checking for collect2 libraries" >&5
+echo "configure:3421: checking for collect2 libraries" >&5
if eval "test \"`echo '$''{'gcc_cv_collect2_libs'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
do
LIBS="$libs"
cat > conftest.$ac_ext <<EOF
-#line 3302 "configure"
+#line 3432 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
ldopen()
; return 0; }
EOF
-if { (eval echo configure:3313: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3443: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
gcc_cv_collect2_libs="$libs"; break
else
LIBS=
echo $ac_n "checking for library containing exc_resume""... $ac_c" 1>&6
-echo "configure:3339: checking for library containing exc_resume" >&5
+echo "configure:3469: checking for library containing exc_resume" >&5
if eval "test \"`echo '$''{'ac_cv_search_exc_resume'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_func_search_save_LIBS="$LIBS"
ac_cv_search_exc_resume="no"
cat > conftest.$ac_ext <<EOF
-#line 3346 "configure"
+#line 3476 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
exc_resume()
; return 0; }
EOF
-if { (eval echo configure:3357: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3487: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_search_exc_resume="none required"
else
test "$ac_cv_search_exc_resume" = "no" && for i in exc; do
LIBS="-l$i $ac_func_search_save_LIBS"
cat > conftest.$ac_ext <<EOF
-#line 3368 "configure"
+#line 3498 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
exc_resume()
; return 0; }
EOF
-if { (eval echo configure:3379: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3509: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_search_exc_resume="-l$i"
break
echo $ac_n "checking for preprocessor stringizing operator""... $ac_c" 1>&6
-echo "configure:3408: checking for preprocessor stringizing operator" >&5
+echo "configure:3538: checking for preprocessor stringizing operator" >&5
if eval "test \"`echo '$''{'ac_cv_c_stringize'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3413 "configure"
+#line 3543 "configure"
#include "confdefs.h"
#define x(y) #y
# Use <inttypes.h> only if it exists,
# doesn't clash with <sys/types.h>, and declares intmax_t.
echo $ac_n "checking for inttypes.h""... $ac_c" 1>&6
-echo "configure:3446: checking for inttypes.h" >&5
+echo "configure:3576: checking for inttypes.h" >&5
if eval "test \"`echo '$''{'gcc_cv_header_inttypes_h'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3451 "configure"
+#line 3581 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <inttypes.h>
intmax_t i = -1;
; return 0; }
EOF
-if { (eval echo configure:3459: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3589: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
gcc_cv_header_inttypes_h=yes
else
scandir alphasort
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3486: checking for $ac_func" >&5
+echo "configure:3616: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3491 "configure"
+#line 3621 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:3514: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3644: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
echo $ac_n "checking for ssize_t""... $ac_c" 1>&6
-echo "configure:3540: checking for ssize_t" >&5
+echo "configure:3670: checking for ssize_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_ssize_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3545 "configure"
+#line 3675 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
# Try to determine the array type of the second argument of getgroups
# for the target system (int or gid_t).
echo $ac_n "checking for uid_t in sys/types.h""... $ac_c" 1>&6
-echo "configure:3576: checking for uid_t in sys/types.h" >&5
+echo "configure:3706: checking for uid_t in sys/types.h" >&5
if eval "test \"`echo '$''{'ac_cv_type_uid_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3581 "configure"
+#line 3711 "configure"
#include "confdefs.h"
#include <sys/types.h>
EOF
fi
echo $ac_n "checking type of array argument to getgroups""... $ac_c" 1>&6
-echo "configure:3610: checking type of array argument to getgroups" >&5
+echo "configure:3740: checking type of array argument to getgroups" >&5
if eval "test \"`echo '$''{'ac_cv_type_getgroups'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_type_getgroups=cross
else
cat > conftest.$ac_ext <<EOF
-#line 3618 "configure"
+#line 3748 "configure"
#include "confdefs.h"
/* Thanks to Mike Rendell for this test. */
}
EOF
-if { (eval echo configure:3643: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:3773: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_type_getgroups=gid_t
else
if test $ac_cv_type_getgroups = cross; then
cat > conftest.$ac_ext <<EOF
-#line 3657 "configure"
+#line 3787 "configure"
#include "confdefs.h"
#include <unistd.h>
EOF
echo $ac_n "checking whether the printf functions support %p""... $ac_c" 1>&6
-echo "configure:3698: checking whether the printf functions support %p" >&5
+echo "configure:3828: checking whether the printf functions support %p" >&5
if eval "test \"`echo '$''{'gcc_cv_func_printf_ptr'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
gcc_cv_func_printf_ptr=no
else
cat > conftest.$ac_ext <<EOF
-#line 3706 "configure"
+#line 3836 "configure"
#include "confdefs.h"
#include <stdio.h>
return (p != q);
}
EOF
-if { (eval echo configure:3719: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:3849: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
gcc_cv_func_printf_ptr=yes
else
;;
esac
echo $ac_n "checking for pid_t""... $ac_c" 1>&6
-echo "configure:3757: checking for pid_t" >&5
+echo "configure:3887: checking for pid_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_pid_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3762 "configure"
+#line 3892 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
ac_safe=`echo "vfork.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for vfork.h""... $ac_c" 1>&6
-echo "configure:3791: checking for vfork.h" >&5
+echo "configure:3921: checking for vfork.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3796 "configure"
+#line 3926 "configure"
#include "confdefs.h"
#include <vfork.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3801: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3931: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
fi
echo $ac_n "checking for working vfork""... $ac_c" 1>&6
-echo "configure:3826: checking for working vfork" >&5
+echo "configure:3956: checking for working vfork" >&5
if eval "test \"`echo '$''{'ac_cv_func_vfork_works'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test "$cross_compiling" = yes; then
echo $ac_n "checking for vfork""... $ac_c" 1>&6
-echo "configure:3832: checking for vfork" >&5
+echo "configure:3962: checking for vfork" >&5
if eval "test \"`echo '$''{'ac_cv_func_vfork'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3837 "configure"
+#line 3967 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char vfork(); below. */
; return 0; }
EOF
-if { (eval echo configure:3860: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3990: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_vfork=yes"
else
ac_cv_func_vfork_works=$ac_cv_func_vfork
else
cat > conftest.$ac_ext <<EOF
-#line 3882 "configure"
+#line 4012 "configure"
#include "confdefs.h"
/* Thanks to Paul Eggert for this test. */
#include <stdio.h>
}
}
EOF
-if { (eval echo configure:3977: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:4107: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_func_vfork_works=yes
else
for ac_func in getpagesize
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:4002: checking for $ac_func" >&5
+echo "configure:4132: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4007 "configure"
+#line 4137 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:4030: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4160: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
EOF
echo $ac_n "checking for working mmap from /dev/zero""... $ac_c" 1>&6
-echo "configure:4301: checking for working mmap from /dev/zero" >&5
+echo "configure:4431: checking for working mmap from /dev/zero" >&5
if eval "test \"`echo '$''{'ac_cv_func_mmap_dev_zero'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
esac
else
cat > conftest.$ac_ext <<EOF
-#line 4317 "configure"
+#line 4447 "configure"
#include "confdefs.h"
#include "ct-mmap.inc"
EOF
-if { (eval echo configure:4321: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:4451: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_func_mmap_dev_zero=yes
else
fi
echo $ac_n "checking for working mmap with MAP_ANON(YMOUS)""... $ac_c" 1>&6
-echo "configure:4348: checking for working mmap with MAP_ANON(YMOUS)" >&5
+echo "configure:4478: checking for working mmap with MAP_ANON(YMOUS)" >&5
if eval "test \"`echo '$''{'ac_cv_func_mmap_anon'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_func_mmap_anon=no
else
cat > conftest.$ac_ext <<EOF
-#line 4358 "configure"
+#line 4488 "configure"
#include "confdefs.h"
#define USE_MAP_ANON
#include "ct-mmap.inc"
EOF
-if { (eval echo configure:4363: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:4493: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_func_mmap_anon=yes
else
rm -f ct-mmap.inc
echo $ac_n "checking for working mmap of a file""... $ac_c" 1>&6
-echo "configure:4391: checking for working mmap of a file" >&5
+echo "configure:4521: checking for working mmap of a file" >&5
if eval "test \"`echo '$''{'ac_cv_func_mmap_file'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_func_mmap_file=no
else
cat > conftest.$ac_ext <<EOF
-#line 4406 "configure"
+#line 4536 "configure"
#include "confdefs.h"
/* Test by Zack Weinberg. Modified from MMAP_ANYWHERE test by
exit(0);
}
EOF
-if { (eval echo configure:4443: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:4573: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_func_mmap_file=yes
else
echo $ac_n "checking for iconv""... $ac_c" 1>&6
-echo "configure:4482: checking for iconv" >&5
+echo "configure:4612: checking for iconv" >&5
if eval "test \"`echo '$''{'am_cv_func_iconv'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
am_cv_func_iconv="no, consider installing GNU libiconv"
am_cv_lib_iconv=no
cat > conftest.$ac_ext <<EOF
-#line 4490 "configure"
+#line 4620 "configure"
#include "confdefs.h"
#include <stdlib.h>
#include <iconv.h>
iconv_close(cd);
; return 0; }
EOF
-if { (eval echo configure:4500: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4630: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
am_cv_func_iconv=yes
else
am_save_LIBS="$LIBS"
LIBS="$LIBS $am_cv_libiconv_ldpath -liconv"
cat > conftest.$ac_ext <<EOF
-#line 4512 "configure"
+#line 4642 "configure"
#include "confdefs.h"
#include <stdlib.h>
#include <iconv.h>
iconv_close(cd);
; return 0; }
EOF
-if { (eval echo configure:4522: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4652: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
am_cv_lib_iconv=yes
am_cv_func_iconv=yes
EOF
echo $ac_n "checking for iconv declaration""... $ac_c" 1>&6
-echo "configure:4543: checking for iconv declaration" >&5
+echo "configure:4673: checking for iconv declaration" >&5
if eval "test \"`echo '$''{'am_cv_proto_iconv'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4549 "configure"
+#line 4679 "configure"
#include "confdefs.h"
#include <stdlib.h>
; return 0; }
EOF
-if { (eval echo configure:4568: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4698: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
am_cv_proto_iconv_arg1=""
else
do
ac_tr_decl=HAVE_DECL_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
echo $ac_n "checking whether $ac_func is declared""... $ac_c" 1>&6
-echo "configure:4606: checking whether $ac_func is declared" >&5
+echo "configure:4736: checking whether $ac_func is declared" >&5
if eval "test \"`echo '$''{'gcc_cv_have_decl_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4611 "configure"
+#line 4741 "configure"
#include "confdefs.h"
#undef $ac_tr_decl
#define $ac_tr_decl 1
#endif
; return 0; }
EOF
-if { (eval echo configure:4625: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4755: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
eval "gcc_cv_have_decl_$ac_func=yes"
else
do
ac_tr_decl=HAVE_DECL_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
echo $ac_n "checking whether $ac_func is declared""... $ac_c" 1>&6
-echo "configure:4727: checking whether $ac_func is declared" >&5
+echo "configure:4857: checking whether $ac_func is declared" >&5
if eval "test \"`echo '$''{'gcc_cv_have_decl_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4732 "configure"
+#line 4862 "configure"
#include "confdefs.h"
#undef $ac_tr_decl
#define $ac_tr_decl 1
#endif
; return 0; }
EOF
-if { (eval echo configure:4750: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4880: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
eval "gcc_cv_have_decl_$ac_func=yes"
else
do
ac_tr_decl=HAVE_DECL_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
echo $ac_n "checking whether $ac_func is declared""... $ac_c" 1>&6
-echo "configure:4792: checking whether $ac_func is declared" >&5
+echo "configure:4922: checking whether $ac_func is declared" >&5
if eval "test \"`echo '$''{'gcc_cv_have_decl_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4797 "configure"
+#line 4927 "configure"
#include "confdefs.h"
#undef $ac_tr_decl
#define $ac_tr_decl 1
#endif
; return 0; }
EOF
-if { (eval echo configure:4815: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4945: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
eval "gcc_cv_have_decl_$ac_func=yes"
else
# More time-related stuff.
echo $ac_n "checking for struct tms""... $ac_c" 1>&6
-echo "configure:4849: checking for struct tms" >&5
+echo "configure:4979: checking for struct tms" >&5
if eval "test \"`echo '$''{'ac_cv_struct_tms'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4855 "configure"
+#line 4985 "configure"
#include "confdefs.h"
#include "ansidecl.h"
struct tms tms;
; return 0; }
EOF
-if { (eval echo configure:4868: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4998: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_struct_tms=yes
else
# use gcc_cv_* here because this doesn't match the behavior of AC_CHECK_TYPE.
# revisit after autoconf 2.50.
echo $ac_n "checking for clock_t""... $ac_c" 1>&6
-echo "configure:4891: checking for clock_t" >&5
+echo "configure:5021: checking for clock_t" >&5
if eval "test \"`echo '$''{'gcc_cv_type_clock_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4897 "configure"
+#line 5027 "configure"
#include "confdefs.h"
#include "ansidecl.h"
clock_t x;
; return 0; }
EOF
-if { (eval echo configure:4907: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5037: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
gcc_cv_type_clock_t=yes
else
gcc_cv_initfinit_array=$enableval
else
echo $ac_n "checking for .preinit_array/.init_array/.fini_array support""... $ac_c" 1>&6
-echo "configure:4933: checking for .preinit_array/.init_array/.fini_array support" >&5
+echo "configure:5063: checking for .preinit_array/.init_array/.fini_array support" >&5
if eval "test \"`echo '$''{'gcc_cv_initfinit_array'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
int foo (void) { x = 0; }
int (*fp) (void) __attribute__ ((section (".init_array"))) = foo;
EOF
- if { ac_try='${CC-cc} -o conftest conftest.c 1>&AS_MESSAGE_LOG_FD'; { (eval echo configure:4943: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
+ if { ac_try='${CC-cc} -o conftest conftest.c 1>&AS_MESSAGE_LOG_FD'; { (eval echo configure:5073: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
then
if ./conftest; then
gcc_cv_initfinit_array=yes
# mkdir takes a single argument on some systems.
echo $ac_n "checking if mkdir takes one argument""... $ac_c" 1>&6
-echo "configure:4972: checking if mkdir takes one argument" >&5
+echo "configure:5102: checking if mkdir takes one argument" >&5
if eval "test \"`echo '$''{'gcc_cv_mkdir_takes_one_arg'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4977 "configure"
+#line 5107 "configure"
#include "confdefs.h"
#include <sys/types.h>
mkdir ("foo", 0);
; return 0; }
EOF
-if { (eval echo configure:4994: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5124: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
gcc_cv_mkdir_takes_one_arg=no
else
echo $ac_n "checking for library containing strerror""... $ac_c" 1>&6
-echo "configure:5262: checking for library containing strerror" >&5
+echo "configure:5392: checking for library containing strerror" >&5
if eval "test \"`echo '$''{'ac_cv_search_strerror'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_func_search_save_LIBS="$LIBS"
ac_cv_search_strerror="no"
cat > conftest.$ac_ext <<EOF
-#line 5269 "configure"
+#line 5399 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
strerror()
; return 0; }
EOF
-if { (eval echo configure:5280: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5410: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_search_strerror="none required"
else
test "$ac_cv_search_strerror" = "no" && for i in cposix; do
LIBS="-l$i $ac_func_search_save_LIBS"
cat > conftest.$ac_ext <<EOF
-#line 5291 "configure"
+#line 5421 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
strerror()
; return 0; }
EOF
-if { (eval echo configure:5302: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5432: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_search_strerror="-l$i"
break
echo $ac_n "checking for working const""... $ac_c" 1>&6
-echo "configure:5325: checking for working const" >&5
+echo "configure:5455: checking for working const" >&5
if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5330 "configure"
+#line 5460 "configure"
#include "confdefs.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:5379: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5509: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_const=yes
else
fi
echo $ac_n "checking for off_t""... $ac_c" 1>&6
-echo "configure:5400: checking for off_t" >&5
+echo "configure:5530: checking for off_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5405 "configure"
+#line 5535 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
fi
echo $ac_n "checking for size_t""... $ac_c" 1>&6
-echo "configure:5433: checking for size_t" >&5
+echo "configure:5563: checking for size_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5438 "configure"
+#line 5568 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
# The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
# for constant arguments. Useless!
echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6
-echo "configure:5468: checking for working alloca.h" >&5
+echo "configure:5598: checking for working alloca.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5473 "configure"
+#line 5603 "configure"
#include "confdefs.h"
#include <alloca.h>
int main() {
char *p = alloca(2 * sizeof(int));
; return 0; }
EOF
-if { (eval echo configure:5480: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5610: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_header_alloca_h=yes
else
fi
echo $ac_n "checking for alloca""... $ac_c" 1>&6
-echo "configure:5501: checking for alloca" >&5
+echo "configure:5631: checking for alloca" >&5
if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5506 "configure"
+#line 5636 "configure"
#include "confdefs.h"
#ifdef __GNUC__
char *p = (char *) alloca(1);
; return 0; }
EOF
-if { (eval echo configure:5534: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5664: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_func_alloca_works=yes
else
echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6
-echo "configure:5566: checking whether alloca needs Cray hooks" >&5
+echo "configure:5696: checking whether alloca needs Cray hooks" >&5
if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5571 "configure"
+#line 5701 "configure"
#include "confdefs.h"
#if defined(CRAY) && ! defined(CRAY2)
webecray
if test $ac_cv_os_cray = yes; then
for ac_func in _getb67 GETB67 getb67; do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:5596: checking for $ac_func" >&5
+echo "configure:5726: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5601 "configure"
+#line 5731 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:5624: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5754: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
fi
echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6
-echo "configure:5651: checking stack direction for C alloca" >&5
+echo "configure:5781: checking stack direction for C alloca" >&5
if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_c_stack_direction=0
else
cat > conftest.$ac_ext <<EOF
-#line 5659 "configure"
+#line 5789 "configure"
#include "confdefs.h"
find_stack_direction ()
{
exit (find_stack_direction() < 0);
}
EOF
-if { (eval echo configure:5678: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:5808: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_c_stack_direction=1
else
echo $ac_n "checking whether we are using the GNU C Library 2.1 or newer""... $ac_c" 1>&6
-echo "configure:5701: checking whether we are using the GNU C Library 2.1 or newer" >&5
+echo "configure:5831: checking whether we are using the GNU C Library 2.1 or newer" >&5
if eval "test \"`echo '$''{'ac_cv_gnu_library_2_1'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5706 "configure"
+#line 5836 "configure"
#include "confdefs.h"
#include <features.h>
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:5742: checking for $ac_hdr" >&5
+echo "configure:5872: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5747 "configure"
+#line 5877 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:5752: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:5882: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
strdup strtoul tsearch __argz_count __argz_stringify __argz_next
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:5783: checking for $ac_func" >&5
+echo "configure:5913: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5788 "configure"
+#line 5918 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:5811: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5941: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
echo $ac_n "checking for iconv""... $ac_c" 1>&6
-echo "configure:5852: checking for iconv" >&5
+echo "configure:5982: checking for iconv" >&5
if eval "test \"`echo '$''{'am_cv_func_iconv'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
am_cv_func_iconv="no, consider installing GNU libiconv"
am_cv_lib_iconv=no
cat > conftest.$ac_ext <<EOF
-#line 5860 "configure"
+#line 5990 "configure"
#include "confdefs.h"
#include <stdlib.h>
#include <iconv.h>
iconv_close(cd);
; return 0; }
EOF
-if { (eval echo configure:5870: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6000: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
am_cv_func_iconv=yes
else
am_save_LIBS="$LIBS"
LIBS="$LIBS $am_cv_libiconv_ldpath -liconv"
cat > conftest.$ac_ext <<EOF
-#line 5882 "configure"
+#line 6012 "configure"
#include "confdefs.h"
#include <stdlib.h>
#include <iconv.h>
iconv_close(cd);
; return 0; }
EOF
-if { (eval echo configure:5892: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6022: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
am_cv_lib_iconv=yes
am_cv_func_iconv=yes
EOF
echo $ac_n "checking for iconv declaration""... $ac_c" 1>&6
-echo "configure:5913: checking for iconv declaration" >&5
+echo "configure:6043: checking for iconv declaration" >&5
if eval "test \"`echo '$''{'am_cv_proto_iconv'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5919 "configure"
+#line 6049 "configure"
#include "confdefs.h"
#include <stdlib.h>
; return 0; }
EOF
-if { (eval echo configure:5938: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:6068: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
am_cv_proto_iconv_arg1=""
else
echo $ac_n "checking for nl_langinfo and CODESET""... $ac_c" 1>&6
-echo "configure:5967: checking for nl_langinfo and CODESET" >&5
+echo "configure:6097: checking for nl_langinfo and CODESET" >&5
if eval "test \"`echo '$''{'am_cv_langinfo_codeset'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5972 "configure"
+#line 6102 "configure"
#include "confdefs.h"
#include <langinfo.h>
int main() {
char* cs = nl_langinfo(CODESET);
; return 0; }
EOF
-if { (eval echo configure:5979: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6109: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
am_cv_langinfo_codeset=yes
else
if test $ac_cv_header_locale_h = yes; then
echo $ac_n "checking for LC_MESSAGES""... $ac_c" 1>&6
-echo "configure:6002: checking for LC_MESSAGES" >&5
+echo "configure:6132: checking for LC_MESSAGES" >&5
if eval "test \"`echo '$''{'am_cv_val_LC_MESSAGES'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6007 "configure"
+#line 6137 "configure"
#include "confdefs.h"
#include <locale.h>
int main() {
return LC_MESSAGES
; return 0; }
EOF
-if { (eval echo configure:6014: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6144: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
am_cv_val_LC_MESSAGES=yes
else
fi
fi
echo $ac_n "checking whether NLS is requested""... $ac_c" 1>&6
-echo "configure:6035: checking whether NLS is requested" >&5
+echo "configure:6165: checking whether NLS is requested" >&5
# Check whether --enable-nls or --disable-nls was given.
if test "${enable_nls+set}" = set; then
enableval="$enable_nls"
EOF
echo $ac_n "checking whether included gettext is requested""... $ac_c" 1>&6
-echo "configure:6058: checking whether included gettext is requested" >&5
+echo "configure:6188: checking whether included gettext is requested" >&5
# Check whether --with-included-gettext or --without-included-gettext was given.
if test "${with_included_gettext+set}" = set; then
withval="$with_included_gettext"
ac_safe=`echo "libintl.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for libintl.h""... $ac_c" 1>&6
-echo "configure:6078: checking for libintl.h" >&5
+echo "configure:6208: checking for libintl.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6083 "configure"
+#line 6213 "configure"
#include "confdefs.h"
#include <libintl.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:6088: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:6218: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
EOF
echo $ac_n "checking for GNU gettext in libc""... $ac_c" 1>&6
-echo "configure:6109: checking for GNU gettext in libc" >&5
+echo "configure:6239: checking for GNU gettext in libc" >&5
if eval "test \"`echo '$''{'gt_cv_func_gnugettext1_libc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6114 "configure"
+#line 6244 "configure"
#include "confdefs.h"
#include <libintl.h>
extern int _nl_msg_cat_cntr;
return (int) gettext ("") + _nl_msg_cat_cntr
; return 0; }
EOF
-if { (eval echo configure:6123: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6253: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
gt_cv_func_gnugettext1_libc=yes
else
if test "$gt_cv_func_gnugettext1_libc" != "yes"; then
echo $ac_n "checking for GNU gettext in libintl""... $ac_c" 1>&6
-echo "configure:6139: checking for GNU gettext in libintl" >&5
+echo "configure:6269: checking for GNU gettext in libintl" >&5
if eval "test \"`echo '$''{'gt_cv_func_gnugettext1_libintl'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
gt_save_LIBS="$LIBS"
LIBS="$LIBS -lintl $LIBICONV"
cat > conftest.$ac_ext <<EOF
-#line 6146 "configure"
+#line 6276 "configure"
#include "confdefs.h"
#include <libintl.h>
extern int _nl_msg_cat_cntr;
return (int) gettext ("") + _nl_msg_cat_cntr
; return 0; }
EOF
-if { (eval echo configure:6155: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6285: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
gt_cv_func_gnugettext1_libintl=yes
else
for ac_func in dcgettext
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:6188: checking for $ac_func" >&5
+echo "configure:6318: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6193 "configure"
+#line 6323 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:6216: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6346: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
# Extract the first word of "msgfmt", so it can be a program name with args.
set dummy msgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6245: checking for $ac_word" >&5
+echo "configure:6375: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "gmsgfmt", so it can be a program name with args.
set dummy gmsgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6279: checking for $ac_word" >&5
+echo "configure:6409: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "xgettext", so it can be a program name with args.
set dummy xgettext; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6316: checking for $ac_word" >&5
+echo "configure:6446: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "msgfmt", so it can be a program name with args.
set dummy msgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6366: checking for $ac_word" >&5
+echo "configure:6496: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "gmsgfmt", so it can be a program name with args.
set dummy gmsgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6400: checking for $ac_word" >&5
+echo "configure:6530: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "xgettext", so it can be a program name with args.
set dummy xgettext; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6436: checking for $ac_word" >&5
+echo "configure:6566: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6508: checking for $ac_word" >&5
+echo "configure:6638: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_INTLBISON'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_verc_fail=yes
else
echo $ac_n "checking version of bison""... $ac_c" 1>&6
-echo "configure:6541: checking version of bison" >&5
+echo "configure:6671: checking version of bison" >&5
ac_prog_version=`$INTLBISON --version 2>&1 | sed -n 's/^.*GNU Bison.* \([0-9]*\.[0-9.]*\).*$/\1/p'`
case $ac_prog_version in
'') ac_prog_version="v. ?.??, bad"; ac_verc_fail=yes;;
if test "x$CATOBJEXT" != x; then
echo $ac_n "checking for catalogs to be installed""... $ac_c" 1>&6
-echo "configure:6586: checking for catalogs to be installed" >&5
+echo "configure:6716: checking for catalogs to be installed" >&5
# Look for .po and .gmo files in the source directory.
CATALOGS=
XLINGUAS=
case $host_os in
win32 | pe | cygwin* | mingw32* | uwin*)
echo $ac_n "checking whether windows registry support is requested""... $ac_c" 1>&6
-echo "configure:6644: checking whether windows registry support is requested" >&5
+echo "configure:6774: checking whether windows registry support is requested" >&5
if test "x$enable_win32_registry" != xno; then
cat >> confdefs.h <<\EOF
#define ENABLE_WIN32_REGISTRY 1
echo "$ac_t""yes" 1>&6
echo $ac_n "checking for library containing RegOpenKeyExA""... $ac_c" 1>&6
-echo "configure:6653: checking for library containing RegOpenKeyExA" >&5
+echo "configure:6783: checking for library containing RegOpenKeyExA" >&5
if eval "test \"`echo '$''{'ac_cv_search_RegOpenKeyExA'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_func_search_save_LIBS="$LIBS"
ac_cv_search_RegOpenKeyExA="no"
cat > conftest.$ac_ext <<EOF
-#line 6660 "configure"
+#line 6790 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
RegOpenKeyExA()
; return 0; }
EOF
-if { (eval echo configure:6671: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6801: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_search_RegOpenKeyExA="none required"
else
test "$ac_cv_search_RegOpenKeyExA" = "no" && for i in advapi32; do
LIBS="-l$i $ac_func_search_save_LIBS"
cat > conftest.$ac_ext <<EOF
-#line 6682 "configure"
+#line 6812 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
RegOpenKeyExA()
; return 0; }
EOF
-if { (eval echo configure:6693: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6823: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_search_RegOpenKeyExA="-l$i"
break
if test "x$enable_win32_registry" != xno; then
echo $ac_n "checking registry key on windows hosts""... $ac_c" 1>&6
-echo "configure:6735: checking registry key on windows hosts" >&5
+echo "configure:6865: checking registry key on windows hosts" >&5
cat >> confdefs.h <<EOF
#define WIN32_REGISTRY_KEY "$gcc_cv_win32_registry_key"
EOF
# Figure out what assembler we will be using.
echo $ac_n "checking what assembler to use""... $ac_c" 1>&6
-echo "configure:6949: checking what assembler to use" >&5
+echo "configure:7079: checking what assembler to use" >&5
gcc_cv_as=
gcc_cv_gas_major_version=
gcc_cv_gas_minor_version=
# Figure out what linker we will be using.
echo $ac_n "checking what linker to use""... $ac_c" 1>&6
-echo "configure:7043: checking what linker to use" >&5
+echo "configure:7173: checking what linker to use" >&5
gcc_cv_ld=
gcc_cv_gld_major_version=
gcc_cv_gld_minor_version=
# Figure out what nm we will be using.
echo $ac_n "checking what nm to use""... $ac_c" 1>&6
-echo "configure:7136: checking what nm to use" >&5
+echo "configure:7266: checking what nm to use" >&5
if test -x nm$host_exeext; then
gcc_cv_nm=./nm$host_exeext
elif test "x$program_prefix" != xNONE; then
# Figure out what objdump we will be using.
echo $ac_n "checking what objdump to use""... $ac_c" 1>&6
-echo "configure:7148: checking what objdump to use" >&5
+echo "configure:7278: checking what objdump to use" >&5
if test -x objdump$host_exeext; then
gcc_cv_objdump=./objdump$host_exeext
elif test "x$program_prefix" != xNONE; then
# Figure out what assembler alignment features are present.
echo $ac_n "checking assembler alignment features""... $ac_c" 1>&6
-echo "configure:7160: checking assembler alignment features" >&5
+echo "configure:7290: checking assembler alignment features" >&5
gcc_cv_as_alignment_features=none
if test x$gcc_cv_gas_major_version != x -a x$gcc_cv_gas_minor_version != x; then
# Gas version 2.6 and later support for .balign and .p2align.
echo "$ac_t""$gcc_cv_as_alignment_features" 1>&6
echo $ac_n "checking assembler subsection support""... $ac_c" 1>&6
-echo "configure:7208: checking assembler subsection support" >&5
+echo "configure:7338: checking assembler subsection support" >&5
gcc_cv_as_subsections=no
if test x$gcc_cv_gas_major_version != x -a x$gcc_cv_gas_minor_version != x; then
if test "$gcc_cv_gas_major_version" -eq 2 -a "$gcc_cv_gas_minor_version" -ge 9 -o "$gcc_cv_gas_major_version" -gt 2 && grep 'obj_format = elf' ../gas/Makefile > /dev/null; then
echo "$ac_t""$gcc_cv_as_subsections" 1>&6
echo $ac_n "checking assembler weak support""... $ac_c" 1>&6
-echo "configure:7248: checking assembler weak support" >&5
+echo "configure:7378: checking assembler weak support" >&5
gcc_cv_as_weak=no
if test x$gcc_cv_gas_major_version != x -a x$gcc_cv_gas_minor_version != x; then
if test "$gcc_cv_gas_major_version" -eq 2 -a "$gcc_cv_gas_minor_version" -ge 2 -o "$gcc_cv_gas_major_version" -gt 2; then
echo "$ac_t""$gcc_cv_as_weak" 1>&6
echo $ac_n "checking assembler hidden support""... $ac_c" 1>&6
-echo "configure:7271: checking assembler hidden support" >&5
+echo "configure:7401: checking assembler hidden support" >&5
gcc_cv_as_hidden=no
if test x$gcc_cv_gas_major_version != x -a x$gcc_cv_gas_minor_version != x; then
if test "$gcc_cv_gas_major_version" -eq 2 \
echo $ac_n "checking assembler leb128 support""... $ac_c" 1>&6
-echo "configure:7343: checking assembler leb128 support" >&5
+echo "configure:7473: checking assembler leb128 support" >&5
gcc_cv_as_leb128=no
if test x$gcc_cv_gas_major_version != x -a x$gcc_cv_gas_minor_version != x; then
if test "$gcc_cv_gas_major_version" -eq 2 -a "$gcc_cv_gas_minor_version" -ge 11 -o "$gcc_cv_gas_major_version" -gt 2 && grep 'obj_format = elf' ../gas/Makefile > /dev/null; then
echo "$ac_t""$gcc_cv_as_leb128" 1>&6
echo $ac_n "checking assembler eh_frame optimization""... $ac_c" 1>&6
-echo "configure:7388: checking assembler eh_frame optimization" >&5
+echo "configure:7518: checking assembler eh_frame optimization" >&5
gcc_cv_as_eh_frame=no
if test x$gcc_cv_gas_major_version != x -a x$gcc_cv_gas_minor_version != x; then
if test "$gcc_cv_gas_major_version" -eq 2 -a "$gcc_cv_gas_minor_version" -ge 12 -o "$gcc_cv_gas_major_version" -gt 2 && grep 'obj_format = elf' ../gas/Makefile > /dev/null; then
echo "$ac_t""$gcc_cv_as_eh_frame" 1>&6
echo $ac_n "checking assembler section merging support""... $ac_c" 1>&6
-echo "configure:7469: checking assembler section merging support" >&5
+echo "configure:7599: checking assembler section merging support" >&5
gcc_cv_as_shf_merge=no
if test x$gcc_cv_gas_major_version != x -a x$gcc_cv_gas_minor_version != x; then
if test "$gcc_cv_gas_major_version" -eq 2 -a "$gcc_cv_gas_minor_version" -ge 12 -o "$gcc_cv_gas_major_version" -gt 2 && grep 'obj_format = elf' ../gas/Makefile > /dev/null; then
echo "$ac_t""$gcc_cv_as_shf_merge" 1>&6
echo $ac_n "checking assembler thread-local storage support""... $ac_c" 1>&6
-echo "configure:7492: checking assembler thread-local storage support" >&5
+echo "configure:7622: checking assembler thread-local storage support" >&5
gcc_cv_as_tls=no
conftest_s=
tls_first_major=
# All TARGET_ABI_OSF targets.
alpha*-*-osf* | alpha*-*-linux* | alpha*-*-*bsd*)
echo $ac_n "checking assembler supports explicit relocations""... $ac_c" 1>&6
-echo "configure:7600: checking assembler supports explicit relocations" >&5
+echo "configure:7730: checking assembler supports explicit relocations" >&5
if eval "test \"`echo '$''{'gcc_cv_as_explicit_relocs'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
;;
sparc*-*-*)
echo $ac_n "checking assembler .register pseudo-op support""... $ac_c" 1>&6
-echo "configure:7650: checking assembler .register pseudo-op support" >&5
+echo "configure:7780: checking assembler .register pseudo-op support" >&5
if eval "test \"`echo '$''{'gcc_cv_as_register_pseudo_op'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking assembler supports -relax""... $ac_c" 1>&6
-echo "configure:7678: checking assembler supports -relax" >&5
+echo "configure:7808: checking assembler supports -relax" >&5
if eval "test \"`echo '$''{'gcc_cv_as_relax_opt'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking assembler and linker support unaligned pc related relocs""... $ac_c" 1>&6
-echo "configure:7706: checking assembler and linker support unaligned pc related relocs" >&5
+echo "configure:7836: checking assembler and linker support unaligned pc related relocs" >&5
if eval "test \"`echo '$''{'gcc_cv_as_sparc_ua_pcrel'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking assembler and linker support unaligned pc related relocs against hidden symbols""... $ac_c" 1>&6
-echo "configure:7733: checking assembler and linker support unaligned pc related relocs against hidden symbols" >&5
+echo "configure:7863: checking assembler and linker support unaligned pc related relocs against hidden symbols" >&5
if eval "test \"`echo '$''{'gcc_cv_as_sparc_ua_pcrel_hidden'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking for assembler offsetable %lo() support""... $ac_c" 1>&6
-echo "configure:7773: checking for assembler offsetable %lo() support" >&5
+echo "configure:7903: checking for assembler offsetable %lo() support" >&5
if eval "test \"`echo '$''{'gcc_cv_as_offsetable_lo10'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
i[34567]86-*-* | x86_64-*-*)
echo $ac_n "checking assembler instructions""... $ac_c" 1>&6
-echo "configure:7812: checking assembler instructions" >&5
+echo "configure:7942: checking assembler instructions" >&5
gcc_cv_as_instructions=
if test x$gcc_cv_gas_major_version != x -a x$gcc_cv_gas_minor_version != x; then
if test "$gcc_cv_gas_major_version" -eq 2 -a "$gcc_cv_gas_minor_version" -ge 9 -o "$gcc_cv_gas_major_version" -gt 2; then
echo "$ac_t""$gcc_cv_as_instructions" 1>&6
echo $ac_n "checking assembler GOTOFF in data directives""... $ac_c" 1>&6
-echo "configure:7839: checking assembler GOTOFF in data directives" >&5
+echo "configure:7969: checking assembler GOTOFF in data directives" >&5
gcc_cv_as_gotoff_in_data=no
if test x$gcc_cv_gas_major_version != x -a x$gcc_cv_gas_minor_version != x
then
esac
echo $ac_n "checking assembler dwarf2 debug_line support""... $ac_c" 1>&6
-echo "configure:7869: checking assembler dwarf2 debug_line support" >&5
+echo "configure:7999: checking assembler dwarf2 debug_line support" >&5
gcc_cv_as_dwarf2_debug_line=no
# ??? Not all targets support dwarf2 debug_line, even within a version
# of gas. Moreover, we need to emit a valid instruction to trigger any
echo "$ac_t""$gcc_cv_as_dwarf2_debug_line" 1>&6
echo $ac_n "checking assembler --gdwarf2 support""... $ac_c" 1>&6
-echo "configure:7925: checking assembler --gdwarf2 support" >&5
+echo "configure:8055: checking assembler --gdwarf2 support" >&5
gcc_cv_as_gdwarf2_flag=no
if test x$gcc_cv_gas_major_version != x -a x$gcc_cv_gas_minor_version != x;
then
echo "$ac_t""$gcc_cv_as_gdwarf2_flag" 1>&6
echo $ac_n "checking assembler --gstabs support""... $ac_c" 1>&6
-echo "configure:7954: checking assembler --gstabs support" >&5
+echo "configure:8084: checking assembler --gstabs support" >&5
gcc_cv_as_gstabs_flag=no
if test x$gcc_cv_gas_major_version != x -a x$gcc_cv_gas_minor_version != x;
then
echo "$ac_t""$gcc_cv_as_gstabs_flag" 1>&6
echo $ac_n "checking linker PT_GNU_EH_FRAME support""... $ac_c" 1>&6
-echo "configure:7982: checking linker PT_GNU_EH_FRAME support" >&5
+echo "configure:8112: checking linker PT_GNU_EH_FRAME support" >&5
gcc_cv_ld_eh_frame_hdr=no
if test x$gcc_cv_gld_major_version != x -a x$gcc_cv_gld_minor_version != x; then
if test "$gcc_cv_gld_major_version" -eq 2 -a "$gcc_cv_gld_minor_version" -ge 12 -o "$gcc_cv_gld_major_version" -gt 2 && grep 'EMUL = elf' ../ld/Makefile > /dev/null; then
case "$target" in
mips*-*-*)
echo $ac_n "checking whether libgloss uses STARTUP directives consistently""... $ac_c" 1>&6
-echo "configure:8006: checking whether libgloss uses STARTUP directives consistently" >&5
+echo "configure:8136: checking whether libgloss uses STARTUP directives consistently" >&5
gcc_cv_mips_libgloss_startup=no
gcc_cv_libgloss_srcdir=`echo $srcdir | sed -e 's,/gcc$,,'`/libgloss
if test "x$exec_prefix" = xNONE; then
echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:8210: checking whether to enable maintainer-specific portions of Makefiles" >&5
+echo "configure:8340: checking whether to enable maintainer-specific portions of Makefiles" >&5
# Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
if test "${enable_maintainer_mode+set}" = set; then
enableval="$enable_maintainer_mode"
s%@oldincludedir@%$oldincludedir%g
s%@infodir@%$infodir%g
s%@mandir@%$mandir%g
-s%@enable_multilib@%$enable_multilib%g
-s%@nocommon_flag@%$nocommon_flag%g
-s%@coverage_flags@%$coverage_flags%g
-s%@enable_shared@%$enable_shared%g
+s%@CC@%$CC%g
+s%@NO_MINUS_C_MINUS_O@%$NO_MINUS_C_MINUS_O%g
+s%@OUTPUT_OPTION@%$OUTPUT_OPTION%g
s%@host@%$host%g
s%@host_alias@%$host_alias%g
s%@host_cpu@%$host_cpu%g
s%@host_vendor@%$host_vendor%g
s%@host_os@%$host_os%g
-s%@target@%$target%g
-s%@target_alias@%$target_alias%g
-s%@target_cpu@%$target_cpu%g
-s%@target_vendor@%$target_vendor%g
-s%@target_os@%$target_os%g
s%@build@%$build%g
s%@build_alias@%$build_alias%g
s%@build_cpu@%$build_cpu%g
s%@build_vendor@%$build_vendor%g
s%@build_os@%$build_os%g
-s%@CC@%$CC%g
-s%@NO_MINUS_C_MINUS_O@%$NO_MINUS_C_MINUS_O%g
-s%@OUTPUT_OPTION@%$OUTPUT_OPTION%g
s%@GNATBIND@%$GNATBIND%g
s%@ADAC@%$ADAC%g
s%@strict1_warn@%$strict1_warn%g
s%@CPP@%$CPP%g
s%@warn_cflags@%$warn_cflags%g
+s%@enable_multilib@%$enable_multilib%g
+s%@nocommon_flag@%$nocommon_flag%g
+s%@valgrind_path@%$valgrind_path%g
+s%@valgrind_path_defines@%$valgrind_path_defines%g
+s%@valgrind_command@%$valgrind_command%g
+s%@coverage_flags@%$coverage_flags%g
+s%@enable_shared@%$enable_shared%g
+s%@target@%$target%g
+s%@target_alias@%$target_alias%g
+s%@target_cpu@%$target_cpu%g
+s%@target_vendor@%$target_vendor%g
+s%@target_os@%$target_os%g
s%@stage1_cflags@%$stage1_cflags%g
s%@SET_MAKE@%$SET_MAKE%g
s%@AWK@%$AWK%g