case I915_PARAM_HAS_GEM:
value = dev_priv->has_gem;
break;
+ case I915_PARAM_NUM_FENCES_AVAIL:
+ value = dev_priv->num_fence_regs - dev_priv->fence_reg_start;
+ break;
default:
DRM_ERROR("Unknown parameter %d\n", param->param);
return -EINVAL;
case I915_SETPARAM_ALLOW_BATCHBUFFER:
dev_priv->allow_batchbuffer = param->value;
break;
+ case I915_SETPARAM_NUM_USED_FENCES:
+ if (param->value > dev_priv->num_fence_regs ||
+ param->value < 0)
+ return -EINVAL;
+ /* Userspace can use first N regs */
+ dev_priv->fence_reg_start = param->value;
+ break;
default:
DRM_ERROR("unknown parameter %d\n", param->param);
return -EINVAL;
void i915_gem_free_object(struct drm_gem_object *obj);
int i915_gem_object_pin(struct drm_gem_object *obj, uint32_t alignment);
void i915_gem_object_unpin(struct drm_gem_object *obj);
+int i915_gem_object_unbind(struct drm_gem_object *obj);
void i915_gem_lastclose(struct drm_device *dev);
uint32_t i915_get_gem_seqno(struct drm_device *dev);
void i915_gem_retire_requests(struct drm_device *dev);
IS_I945GM(dev) || IS_I965GM(dev) || IS_GM45(dev))
#define I915_NEED_GFX_HWS(dev) (IS_G33(dev) || IS_GM45(dev) || IS_G4X(dev))
+/* With the 945 and later, Y tiling got adjusted so that it was 32 128-byte
+ * rows, which changed the alignment requirements and fence programming.
+ */
+#define HAS_128_BYTE_Y_TILING(dev) (IS_I9XX(dev) && !(IS_I915G(dev) || \
+ IS_I915GM(dev)))
#define SUPPORTS_INTEGRATED_HDMI(dev) (IS_G4X(dev))
#define PRIMARY_RINGBUFFER_SIZE (128*1024)
static int i915_gem_object_wait_rendering(struct drm_gem_object *obj);
static int i915_gem_object_bind_to_gtt(struct drm_gem_object *obj,
unsigned alignment);
-static int i915_gem_object_get_fence_reg(struct drm_gem_object *obj);
+static int i915_gem_object_get_fence_reg(struct drm_gem_object *obj, bool write);
static void i915_gem_clear_fence_reg(struct drm_gem_object *obj);
static int i915_gem_evict_something(struct drm_device *dev);
static int i915_gem_phys_pwrite(struct drm_device *dev, struct drm_gem_object *obj,
pgoff_t page_offset;
unsigned long pfn;
int ret = 0;
+ bool write = !!(vmf->flags & FAULT_FLAG_WRITE);
/* We don't use vmf->pgoff since that has the fake offset */
page_offset = ((unsigned long)vmf->virtual_address - vma->vm_start) >>
/* Need a new fence register? */
if (obj_priv->fence_reg == I915_FENCE_REG_NONE &&
obj_priv->tiling_mode != I915_TILING_NONE) {
- ret = i915_gem_object_get_fence_reg(obj);
+ ret = i915_gem_object_get_fence_reg(obj, write);
if (ret != 0)
return VM_FAULT_SIGBUS;
}
/**
* Unbinds an object from the GTT aperture.
*/
-static int
+int
i915_gem_object_unbind(struct drm_gem_object *obj)
{
struct drm_device *dev = obj->dev;
drm_i915_private_t *dev_priv = dev->dev_private;
struct drm_i915_gem_object *obj_priv = obj->driver_private;
int regnum = obj_priv->fence_reg;
+ int tile_width;
uint32_t val;
uint32_t pitch_val;
if ((obj_priv->gtt_offset & ~I915_FENCE_START_MASK) ||
(obj_priv->gtt_offset & (obj->size - 1))) {
- WARN(1, "%s: object not 1M or size aligned\n", __func__);
+ WARN(1, "%s: object 0x%08x not 1M or size (0x%x) aligned\n",
+ __func__, obj_priv->gtt_offset, obj->size);
return;
}
- if (obj_priv->tiling_mode == I915_TILING_Y && (IS_I945G(dev) ||
- IS_I945GM(dev) ||
- IS_G33(dev)))
- pitch_val = (obj_priv->stride / 128) - 1;
+ if (obj_priv->tiling_mode == I915_TILING_Y &&
+ HAS_128_BYTE_Y_TILING(dev))
+ tile_width = 128;
else
- pitch_val = (obj_priv->stride / 512) - 1;
+ tile_width = 512;
+
+ /* Note: pitch better be a power of two tile widths */
+ pitch_val = obj_priv->stride / tile_width;
+ pitch_val = ffs(pitch_val) - 1;
val = obj_priv->gtt_offset;
if (obj_priv->tiling_mode == I915_TILING_Y)
if ((obj_priv->gtt_offset & ~I915_FENCE_START_MASK) ||
(obj_priv->gtt_offset & (obj->size - 1))) {
- WARN(1, "%s: object not 1M or size aligned\n", __func__);
+ WARN(1, "%s: object 0x%08x not 1M or size aligned\n",
+ __func__, obj_priv->gtt_offset);
return;
}
/**
* i915_gem_object_get_fence_reg - set up a fence reg for an object
* @obj: object to map through a fence reg
+ * @write: object is about to be written
*
* When mapping objects through the GTT, userspace wants to be able to write
* to them without having to worry about swizzling if the object is tiled.
* and tiling format.
*/
static int
-i915_gem_object_get_fence_reg(struct drm_gem_object *obj)
+i915_gem_object_get_fence_reg(struct drm_gem_object *obj, bool write)
{
struct drm_device *dev = obj->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
WARN(1, "allocating a fence for non-tiled object?\n");
break;
case I915_TILING_X:
- WARN(obj_priv->stride & (512 - 1),
- "object is X tiled but has non-512B pitch\n");
+ if (!obj_priv->stride)
+ return -EINVAL;
+ WARN((obj_priv->stride & (512 - 1)),
+ "object 0x%08x is X tiled but has non-512B pitch\n",
+ obj_priv->gtt_offset);
break;
case I915_TILING_Y:
- WARN(obj_priv->stride & (128 - 1),
- "object is Y tiled but has non-128B pitch\n");
+ if (!obj_priv->stride)
+ return -EINVAL;
+ WARN((obj_priv->stride & (128 - 1)),
+ "object 0x%08x is Y tiled but has non-128B pitch\n",
+ obj_priv->gtt_offset);
break;
}
if (dev_priv->mm.suspended)
return -EBUSY;
if (alignment == 0)
- alignment = PAGE_SIZE;
+ alignment = i915_gem_get_gtt_alignment(obj);
if (alignment & (PAGE_SIZE - 1)) {
DRM_ERROR("Invalid object alignment requested %u\n", alignment);
return -EINVAL;
DRM_ERROR("Failure to bind: %d", ret);
return ret;
}
+ /*
+ * Pre-965 chips need a fence register set up in order to
+ * properly handle tiled surfaces.
+ */
+ if (!IS_I965G(dev) &&
+ obj_priv->fence_reg == I915_FENCE_REG_NONE &&
+ obj_priv->tiling_mode != I915_TILING_NONE)
+ i915_gem_object_get_fence_reg(obj, true);
}
obj_priv->pin_count++;
/* Old X drivers will take 0-2 for front, back, depth buffers */
dev_priv->fence_reg_start = 3;
- if (IS_I965G(dev))
+ if (IS_I965G(dev) || IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev))
dev_priv->num_fence_regs = 16;
else
dev_priv->num_fence_regs = 8;
dev_priv->mm.bit_6_swizzle_y = swizzle_y;
}
+
+/**
+ * Returns the size of the fence for a tiled object of the given size.
+ */
+static int
+i915_get_fence_size(struct drm_device *dev, int size)
+{
+ int i;
+ int start;
+
+ if (IS_I965G(dev)) {
+ /* The 965 can have fences at any page boundary. */
+ return ALIGN(size, 4096);
+ } else {
+ /* Align the size to a power of two greater than the smallest
+ * fence size.
+ */
+ if (IS_I9XX(dev))
+ start = 1024 * 1024;
+ else
+ start = 512 * 1024;
+
+ for (i = start; i < size; i <<= 1)
+ ;
+
+ return i;
+ }
+}
+
+/* Check pitch constriants for all chips & tiling formats */
+static bool
+i915_tiling_ok(struct drm_device *dev, int stride, int size, int tiling_mode)
+{
+ int tile_width;
+
+ /* Linear is always fine */
+ if (tiling_mode == I915_TILING_NONE)
+ return true;
+
+ if (tiling_mode == I915_TILING_Y && HAS_128_BYTE_Y_TILING(dev))
+ tile_width = 128;
+ else
+ tile_width = 512;
+
+ /* 965+ just needs multiples of tile width */
+ if (IS_I965G(dev)) {
+ if (stride & (tile_width - 1))
+ return false;
+ return true;
+ }
+
+ /* Pre-965 needs power of two tile widths */
+ if (stride < tile_width)
+ return false;
+
+ if (stride & (stride - 1))
+ return false;
+
+ /* We don't handle the aperture area covered by the fence being bigger
+ * than the object size.
+ */
+ if (i915_get_fence_size(dev, size) != size)
+ return false;
+
+ return true;
+}
+
/**
* Sets the tiling mode of an object, returning the required swizzling of
* bit 6 of addresses in the object.
return -EINVAL;
obj_priv = obj->driver_private;
+ if (!i915_tiling_ok(dev, args->stride, obj->size, args->tiling_mode))
+ return -EINVAL;
+
mutex_lock(&dev->struct_mutex);
if (args->tiling_mode == I915_TILING_NONE) {
args->swizzle_mode = I915_BIT_6_SWIZZLE_NONE;
}
}
- obj_priv->tiling_mode = args->tiling_mode;
+ if (args->tiling_mode != obj_priv->tiling_mode) {
+ int ret;
+
+ /* Unbind the object, as switching tiling means we're
+ * switching the cache organization due to fencing, probably.
+ */
+ ret = i915_gem_object_unbind(obj);
+ if (ret != 0) {
+ WARN(ret != -ERESTARTSYS,
+ "failed to unbind object for tiling switch");
+ args->tiling_mode = obj_priv->tiling_mode;
+ mutex_unlock(&dev->struct_mutex);
+
+ return ret;
+ }
+ obj_priv->tiling_mode = args->tiling_mode;
+ }
obj_priv->stride = args->stride;
mutex_unlock(&dev->struct_mutex);
#define FENCE_REG_830_0 0x2000
#define I830_FENCE_START_MASK 0x07f80000
#define I830_FENCE_TILING_Y_SHIFT 12
-#define I830_FENCE_SIZE_BITS(size) ((get_order(size >> 19) - 1) << 8)
+#define I830_FENCE_SIZE_BITS(size) ((ffs((size) >> 19) - 1) << 8)
#define I830_FENCE_PITCH_SHIFT 4
#define I830_FENCE_REG_VALID (1<<0)
#define I915_FENCE_START_MASK 0x0ff00000
-#define I915_FENCE_SIZE_BITS(size) ((get_order(size >> 20) - 1) << 8)
+#define I915_FENCE_SIZE_BITS(size) ((ffs((size) >> 20) - 1) << 8)
#define FENCE_REG_965_0 0x03000
#define I965_FENCE_PITCH_SHIFT 2
#define I915_PARAM_LAST_DISPATCH 3
#define I915_PARAM_CHIPSET_ID 4
#define I915_PARAM_HAS_GEM 5
+#define I915_PARAM_NUM_FENCES_AVAIL 6
typedef struct drm_i915_getparam {
int param;
#define I915_SETPARAM_USE_MI_BATCHBUFFER_START 1
#define I915_SETPARAM_TEX_LRU_LOG_GRANULARITY 2
#define I915_SETPARAM_ALLOW_BATCHBUFFER 3
+#define I915_SETPARAM_NUM_USED_FENCES 4
typedef struct drm_i915_setparam {
int param;
projects / platform / kernel / kernel-mfld-blackbay.git / commitdiff