gpio: mxc: Convert the driver to DT-only

Since 5.10-rc1 i.MX is a devicetree-only platform, so simplify the code
by removing the unused non-DT support.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20201117105917.27591-1-festevam@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

diff --git a/drivers/gpio/gpio-mxc.c b/drivers/gpio/gpio-mxc.c
index 643f4c5..157106e 100644 (file)
--- a/drivers/gpio/gpio-mxc.c
+++ b/drivers/gpio/gpio-mxc.c
@@ -24,13 +24,6 @@
 #include <linux/of_device.h>
 #include <linux/bug.h>
 
-enum mxc_gpio_hwtype {
-       IMX1_GPIO,      /* runs on i.mx1 */
-       IMX21_GPIO,     /* runs on i.mx21 and i.mx27 */
-       IMX31_GPIO,     /* runs on i.mx31 */
-       IMX35_GPIO,     /* runs on all other i.mx */
-};
-
 /* device type dependent stuff */
 struct mxc_gpio_hwdata {
        unsigned dr_reg;
@@ -68,6 +61,7 @@ struct mxc_gpio_port {
        u32 both_edges;
        struct mxc_gpio_reg_saved gpio_saved_reg;
        bool power_off;
+       const struct mxc_gpio_hwdata *hwdata;
 };
 
 static struct mxc_gpio_hwdata imx1_imx21_gpio_hwdata = {
@@ -115,48 +109,27 @@ static struct mxc_gpio_hwdata imx35_gpio_hwdata = {
        .fall_edge      = 0x03,
 };
 
-static enum mxc_gpio_hwtype mxc_gpio_hwtype;
-static struct mxc_gpio_hwdata *mxc_gpio_hwdata;
-
-#define GPIO_DR                        (mxc_gpio_hwdata->dr_reg)
-#define GPIO_GDIR              (mxc_gpio_hwdata->gdir_reg)
-#define GPIO_PSR               (mxc_gpio_hwdata->psr_reg)
-#define GPIO_ICR1              (mxc_gpio_hwdata->icr1_reg)
-#define GPIO_ICR2              (mxc_gpio_hwdata->icr2_reg)
-#define GPIO_IMR               (mxc_gpio_hwdata->imr_reg)
-#define GPIO_ISR               (mxc_gpio_hwdata->isr_reg)
-#define GPIO_EDGE_SEL          (mxc_gpio_hwdata->edge_sel_reg)
-
-#define GPIO_INT_LOW_LEV       (mxc_gpio_hwdata->low_level)
-#define GPIO_INT_HIGH_LEV      (mxc_gpio_hwdata->high_level)
-#define GPIO_INT_RISE_EDGE     (mxc_gpio_hwdata->rise_edge)
-#define GPIO_INT_FALL_EDGE     (mxc_gpio_hwdata->fall_edge)
+#define GPIO_DR                        (port->hwdata->dr_reg)
+#define GPIO_GDIR              (port->hwdata->gdir_reg)
+#define GPIO_PSR               (port->hwdata->psr_reg)
+#define GPIO_ICR1              (port->hwdata->icr1_reg)
+#define GPIO_ICR2              (port->hwdata->icr2_reg)
+#define GPIO_IMR               (port->hwdata->imr_reg)
+#define GPIO_ISR               (port->hwdata->isr_reg)
+#define GPIO_EDGE_SEL          (port->hwdata->edge_sel_reg)
+
+#define GPIO_INT_LOW_LEV       (port->hwdata->low_level)
+#define GPIO_INT_HIGH_LEV      (port->hwdata->high_level)
+#define GPIO_INT_RISE_EDGE     (port->hwdata->rise_edge)
+#define GPIO_INT_FALL_EDGE     (port->hwdata->fall_edge)
 #define GPIO_INT_BOTH_EDGES    0x4
 
-static const struct platform_device_id mxc_gpio_devtype[] = {
-       {
-               .name = "imx1-gpio",
-               .driver_data = IMX1_GPIO,
-       }, {
-               .name = "imx21-gpio",
-               .driver_data = IMX21_GPIO,
-       }, {
-               .name = "imx31-gpio",
-               .driver_data = IMX31_GPIO,
-       }, {
-               .name = "imx35-gpio",
-               .driver_data = IMX35_GPIO,
-       }, {
-               /* sentinel */
-       }
-};
-
 static const struct of_device_id mxc_gpio_dt_ids[] = {
-       { .compatible = "fsl,imx1-gpio", .data = &mxc_gpio_devtype[IMX1_GPIO], },
-       { .compatible = "fsl,imx21-gpio", .data = &mxc_gpio_devtype[IMX21_GPIO], },
-       { .compatible = "fsl,imx31-gpio", .data = &mxc_gpio_devtype[IMX31_GPIO], },
-       { .compatible = "fsl,imx35-gpio", .data = &mxc_gpio_devtype[IMX35_GPIO], },
-       { .compatible = "fsl,imx7d-gpio", .data = &mxc_gpio_devtype[IMX35_GPIO], },
+       { .compatible = "fsl,imx1-gpio", .data =  &imx1_imx21_gpio_hwdata },
+       { .compatible = "fsl,imx21-gpio", .data = &imx1_imx21_gpio_hwdata },
+       { .compatible = "fsl,imx31-gpio", .data = &imx31_gpio_hwdata },
+       { .compatible = "fsl,imx35-gpio", .data = &imx35_gpio_hwdata },
+       { .compatible = "fsl,imx7d-gpio", .data = &imx35_gpio_hwdata },
        { /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, mxc_gpio_dt_ids);
@@ -372,36 +345,6 @@ static int mxc_gpio_init_gc(struct mxc_gpio_port *port, int irq_base)
        return rv;
 }
 
-static void mxc_gpio_get_hw(struct platform_device *pdev)
-{
-       const struct of_device_id *of_id =
-                       of_match_device(mxc_gpio_dt_ids, &pdev->dev);
-       enum mxc_gpio_hwtype hwtype;
-
-       if (of_id)
-               pdev->id_entry = of_id->data;
-       hwtype = pdev->id_entry->driver_data;
-
-       if (mxc_gpio_hwtype) {
-               /*
-                * The driver works with a reasonable presupposition,
-                * that is all gpio ports must be the same type when
-                * running on one soc.
-                */
-               BUG_ON(mxc_gpio_hwtype != hwtype);
-               return;
-       }
-
-       if (hwtype == IMX35_GPIO)
-               mxc_gpio_hwdata = &imx35_gpio_hwdata;
-       else if (hwtype == IMX31_GPIO)
-               mxc_gpio_hwdata = &imx31_gpio_hwdata;
-       else
-               mxc_gpio_hwdata = &imx1_imx21_gpio_hwdata;
-
-       mxc_gpio_hwtype = hwtype;
-}
-
 static int mxc_gpio_to_irq(struct gpio_chip *gc, unsigned offset)
 {
        struct mxc_gpio_port *port = gpiochip_get_data(gc);
@@ -417,14 +360,14 @@ static int mxc_gpio_probe(struct platform_device *pdev)
        int irq_base;
        int err;
 
-       mxc_gpio_get_hw(pdev);
-
        port = devm_kzalloc(&pdev->dev, sizeof(*port), GFP_KERNEL);
        if (!port)
                return -ENOMEM;
 
        port->dev = &pdev->dev;
 
+       port->hwdata = device_get_match_data(&pdev->dev);
+
        port->base = devm_platform_ioremap_resource(pdev, 0);
        if (IS_ERR(port->base))
                return PTR_ERR(port->base);
@@ -461,7 +404,7 @@ static int mxc_gpio_probe(struct platform_device *pdev)
        writel(0, port->base + GPIO_IMR);
        writel(~0, port->base + GPIO_ISR);
 
-       if (mxc_gpio_hwtype == IMX21_GPIO) {
+       if (of_device_is_compatible(np, "fsl,imx21-gpio")) {
                /*
                 * Setup one handler for all GPIO interrupts. Actually setting
                 * the handler is needed only once, but doing it for every port
@@ -596,7 +539,6 @@ static struct platform_driver mxc_gpio_driver = {
                .suppress_bind_attrs = true,
        },
        .probe          = mxc_gpio_probe,
-       .id_table       = mxc_gpio_devtype,
 };
 
 static int __init gpio_mxc_init(void)