regulator: Refactor to use one da9052_ldo_ops/da9052_dcdc_ops for all LDOs/DCDCs

In current implementation, da9052_ldo_ops and da9052_ldo5_6_ops are very
similar, only the set_voltage is slightly different.
da9052_buckperi_ops and da9052_dcdc_ops are also similar.

This patch adds da9052_regulator_set_voltage for the set_voltage callback
used by all LDOs and DCDCs. Rework da9052_get_regulator_voltage_sel and
da9052_set_dcdc_voltage to make it possible to be shared by all DCDCs.
Rework da9052_list_voltage to make it to be shared by all DCDCs and LDOs.

Then we can remove da9052_ldo5_6_ops and da9052_buckperi_ops.
We can also remove DA9052_LDO5_6 and DA9052_BUCKPERI macros which is not used
now.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

diff --git a/drivers/regulator/da9052-regulator.c b/drivers/regulator/da9052-regulator.c
index ddcba36..7eb7293 100644 (file)
--- a/drivers/regulator/da9052-regulator.c
+++ b/drivers/regulator/da9052-regulator.c
@@ -189,36 +189,23 @@ static int da9052_dcdc_set_current_limit(struct regulator_dev *rdev, int min_uA,
                                         reg_val << 6);
 }
 
-static int da9052_list_buckperi_voltage(struct regulator_dev *rdev,
-                                        unsigned int selector)
-{
-       struct da9052_regulator *regulator = rdev_get_drvdata(rdev);
-       struct da9052_regulator_info *info = regulator->info;
-       int volt_uV;
-
-       if ((regulator->da9052->chip_id == DA9052) &&
-           (selector >= DA9052_BUCK_PERI_REG_MAP_UPTO_3uV)) {
-               volt_uV = ((DA9052_BUCK_PERI_REG_MAP_UPTO_3uV * info->step_uV)
-                           + info->min_uV);
-               volt_uV += (selector - DA9052_BUCK_PERI_REG_MAP_UPTO_3uV)
-                           * (DA9052_BUCK_PERI_3uV_STEP);
-       } else
-                       volt_uV = (selector * info->step_uV) + info->min_uV;
-
-       if (volt_uV > info->max_uV)
-               return -EINVAL;
-
-       return volt_uV;
-}
-
 static int da9052_list_voltage(struct regulator_dev *rdev,
                                unsigned int selector)
 {
        struct da9052_regulator *regulator = rdev_get_drvdata(rdev);
        struct da9052_regulator_info *info = regulator->info;
+       int id = rdev_get_id(rdev);
        int volt_uV;
 
-       volt_uV = info->min_uV + info->step_uV * selector;
+       if ((id == DA9052_ID_BUCK4) && (regulator->da9052->chip_id == DA9052)
+               && (selector >= DA9052_BUCK_PERI_REG_MAP_UPTO_3uV)) {
+               volt_uV = ((DA9052_BUCK_PERI_REG_MAP_UPTO_3uV * info->step_uV)
+                         + info->min_uV);
+               volt_uV += (selector - DA9052_BUCK_PERI_REG_MAP_UPTO_3uV)
+                                   * (DA9052_BUCK_PERI_3uV_STEP);
+       } else {
+               volt_uV = (selector * info->step_uV) + info->min_uV;
+       }
 
        if (volt_uV > info->max_uV)
                return -EINVAL;
@@ -226,13 +213,13 @@ static int da9052_list_voltage(struct regulator_dev *rdev,
        return volt_uV;
 }
 
-static int da9052_regulator_set_voltage_int(struct regulator_dev *rdev,
+static int da9052_regulator_set_voltage(struct regulator_dev *rdev,
                                             int min_uV, int max_uV,
                                             unsigned int *selector)
 {
        struct da9052_regulator *regulator = rdev_get_drvdata(rdev);
        struct da9052_regulator_info *info = regulator->info;
-       int offset = rdev_get_id(rdev);
+       int id = rdev_get_id(rdev);
        int ret;
 
        ret = verify_range(info, min_uV, max_uV);
@@ -242,113 +229,43 @@ static int da9052_regulator_set_voltage_int(struct regulator_dev *rdev,
        if (min_uV < info->min_uV)
                min_uV = info->min_uV;
 
-       *selector = DIV_ROUND_UP(min_uV - info->min_uV, info->step_uV);
+       if ((id == DA9052_ID_BUCK4) && (regulator->da9052->chip_id == DA9052)
+               && (min_uV >= DA9052_CONST_3uV)) {
+                       *selector = DA9052_BUCK_PERI_REG_MAP_UPTO_3uV +
+                                   DIV_ROUND_UP(min_uV - DA9052_CONST_3uV,
+                                                DA9052_BUCK_PERI_3uV_STEP);
+       } else {
+               *selector = DIV_ROUND_UP(min_uV - info->min_uV, info->step_uV);
+       }
 
        ret = da9052_list_voltage(rdev, *selector);
        if (ret < 0)
                return ret;
 
-       return da9052_reg_update(regulator->da9052,
-                                DA9052_BUCKCORE_REG + offset,
+       ret = da9052_reg_update(regulator->da9052,
+                                DA9052_BUCKCORE_REG + id,
                                 (1 << info->volt_shift) - 1, *selector);
-}
-
-static int da9052_set_ldo_voltage(struct regulator_dev *rdev,
-                                  int min_uV, int max_uV,
-                                  unsigned int *selector)
-{
-       return da9052_regulator_set_voltage_int(rdev, min_uV, max_uV, selector);
-}
-
-static int da9052_set_ldo5_6_voltage(struct regulator_dev *rdev,
-                                     int min_uV, int max_uV,
-                                     unsigned int *selector)
-{
-       struct da9052_regulator *regulator = rdev_get_drvdata(rdev);
-       struct da9052_regulator_info *info = regulator->info;
-       int ret;
-
-       ret = da9052_regulator_set_voltage_int(rdev, min_uV, max_uV, selector);
        if (ret < 0)
                return ret;
 
-       /* Some LDOs are DVC controlled which requires enabling of
-        * the LDO activate bit to implment the changes on the
-        * LDO output.
-       */
-       return da9052_reg_update(regulator->da9052, DA9052_SUPPLY_REG,
-                                info->activate_bit, info->activate_bit);
-}
-
-static int da9052_set_dcdc_voltage(struct regulator_dev *rdev,
-                                   int min_uV, int max_uV,
-                                   unsigned int *selector)
-{
-       struct da9052_regulator *regulator = rdev_get_drvdata(rdev);
-       struct da9052_regulator_info *info = regulator->info;
-       int ret;
-
-       ret = da9052_regulator_set_voltage_int(rdev, min_uV, max_uV, selector);
-       if (ret < 0)
-               return ret;
-
-       /* Some DCDCs are DVC controlled which requires enabling of
-        * the DCDC activate bit to implment the changes on the
-        * DCDC output.
-       */
-       return da9052_reg_update(regulator->da9052, DA9052_SUPPLY_REG,
-                                info->activate_bit, info->activate_bit);
-}
-
-static int da9052_get_regulator_voltage_sel(struct regulator_dev *rdev)
-{
-       struct da9052_regulator *regulator = rdev_get_drvdata(rdev);
-       struct da9052_regulator_info *info = regulator->info;
-       int offset = rdev_get_id(rdev);
-       int ret;
-
-       ret = da9052_reg_read(regulator->da9052, DA9052_BUCKCORE_REG + offset);
-       if (ret < 0)
-               return ret;
-
-       ret &= ((1 << info->volt_shift) - 1);
+       /* Some LDOs and DCDCs are DVC controlled which requires enabling of
+        * the activate bit to implment the changes on the output.
+        */
+       switch (id) {
+       case DA9052_ID_BUCK1:
+       case DA9052_ID_BUCK2:
+       case DA9052_ID_BUCK3:
+       case DA9052_ID_LDO2:
+       case DA9052_ID_LDO3:
+               ret = da9052_reg_update(regulator->da9052, DA9052_SUPPLY_REG,
+                                       info->activate_bit, info->activate_bit);
+               break;
+       }
 
        return ret;
 }
 
-static int da9052_set_buckperi_voltage(struct regulator_dev *rdev, int min_uV,
-                                       int max_uV, unsigned int *selector)
-{
-       struct da9052_regulator *regulator = rdev_get_drvdata(rdev);
-       struct da9052_regulator_info *info = regulator->info;
-       int offset = rdev_get_id(rdev);
-       int ret;
-
-       ret = verify_range(info, min_uV, max_uV);
-       if (ret < 0)
-               return ret;
-
-       if (min_uV < info->min_uV)
-               min_uV = info->min_uV;
-
-       if ((regulator->da9052->chip_id == DA9052) &&
-           (min_uV >= DA9052_CONST_3uV))
-               *selector = DA9052_BUCK_PERI_REG_MAP_UPTO_3uV +
-                           DIV_ROUND_UP(min_uV - DA9052_CONST_3uV,
-                                        DA9052_BUCK_PERI_3uV_STEP);
-       else
-               *selector = DIV_ROUND_UP(min_uV - info->min_uV, info->step_uV);
-
-       ret = da9052_list_buckperi_voltage(rdev, *selector);
-       if (ret < 0)
-               return ret;
-
-       return da9052_reg_update(regulator->da9052,
-                                DA9052_BUCKCORE_REG + offset,
-                                (1 << info->volt_shift) - 1, *selector);
-}
-
-static int da9052_get_buckperi_voltage_sel(struct regulator_dev *rdev)
+static int da9052_get_regulator_voltage_sel(struct regulator_dev *rdev)
 {
        struct da9052_regulator *regulator = rdev_get_drvdata(rdev);
        struct da9052_regulator_info *info = regulator->info;
@@ -364,21 +281,8 @@ static int da9052_get_buckperi_voltage_sel(struct regulator_dev *rdev)
        return ret;
 }
 
-static struct regulator_ops da9052_buckperi_ops = {
-       .list_voltage = da9052_list_buckperi_voltage,
-       .get_voltage_sel = da9052_get_buckperi_voltage_sel,
-       .set_voltage = da9052_set_buckperi_voltage,
-
-       .get_current_limit = da9052_dcdc_get_current_limit,
-       .set_current_limit = da9052_dcdc_set_current_limit,
-
-       .is_enabled = da9052_regulator_is_enabled,
-       .enable = da9052_regulator_enable,
-       .disable = da9052_regulator_disable,
-};
-
 static struct regulator_ops da9052_dcdc_ops = {
-       .set_voltage = da9052_set_dcdc_voltage,
+       .set_voltage = da9052_regulator_set_voltage,
        .get_current_limit = da9052_dcdc_get_current_limit,
        .set_current_limit = da9052_dcdc_set_current_limit,
 
@@ -389,18 +293,8 @@ static struct regulator_ops da9052_dcdc_ops = {
        .disable = da9052_regulator_disable,
 };
 
-static struct regulator_ops da9052_ldo5_6_ops = {
-       .set_voltage = da9052_set_ldo5_6_voltage,
-
-       .list_voltage = da9052_list_voltage,
-       .get_voltage_sel = da9052_get_regulator_voltage_sel,
-       .is_enabled = da9052_regulator_is_enabled,
-       .enable = da9052_regulator_enable,
-       .disable = da9052_regulator_disable,
-};
-
 static struct regulator_ops da9052_ldo_ops = {
-       .set_voltage = da9052_set_ldo_voltage,
+       .set_voltage = da9052_regulator_set_voltage,
 
        .list_voltage = da9052_list_voltage,
        .get_voltage_sel = da9052_get_regulator_voltage_sel,
@@ -409,24 +303,6 @@ static struct regulator_ops da9052_ldo_ops = {
        .disable = da9052_regulator_disable,
 };
 
-#define DA9052_LDO5_6(_id, step, min, max, sbits, ebits, abits) \
-{\
-       .reg_desc = {\
-               .name = #_id,\
-               .ops = &da9052_ldo5_6_ops,\
-               .type = REGULATOR_VOLTAGE,\
-               .id = DA9052_ID_##_id,\
-               .n_voltages = (max - min) / step + 1, \
-               .owner = THIS_MODULE,\
-       },\
-       .min_uV = (min) * 1000,\
-       .max_uV = (max) * 1000,\
-       .step_uV = (step) * 1000,\
-       .volt_shift = (sbits),\
-       .en_bit = (ebits),\
-       .activate_bit = (abits),\
-}
-
 #define DA9052_LDO(_id, step, min, max, sbits, ebits, abits) \
 {\
        .reg_desc = {\
@@ -463,32 +339,14 @@ static struct regulator_ops da9052_ldo_ops = {
        .activate_bit = (abits),\
 }
 
-#define DA9052_BUCKPERI(_id, step, min, max, sbits, ebits, abits) \
-{\
-       .reg_desc = {\
-               .name = #_id,\
-               .ops = &da9052_buckperi_ops,\
-               .type = REGULATOR_VOLTAGE,\
-               .id = DA9052_ID_##_id,\
-               .n_voltages = (max - min) / step + 1, \
-               .owner = THIS_MODULE,\
-       },\
-       .min_uV = (min) * 1000,\
-       .max_uV = (max) * 1000,\
-       .step_uV = (step) * 1000,\
-       .volt_shift = (sbits),\
-       .en_bit = (ebits),\
-       .activate_bit = (abits),\
-}
-
 static struct da9052_regulator_info da9052_regulator_info[] = {
        DA9052_DCDC(BUCK1, 25, 500, 2075, 6, 6, DA9052_SUPPLY_VBCOREGO),
        DA9052_DCDC(BUCK2, 25, 500, 2075, 6, 6, DA9052_SUPPLY_VBPROGO),
        DA9052_DCDC(BUCK3, 25, 925, 2500, 6, 6, DA9052_SUPPLY_VBMEMGO),
-       DA9052_BUCKPERI(BUCK4, 50, 1800, 3600, 5, 6, 0),
+       DA9052_DCDC(BUCK4, 50, 1800, 3600, 5, 6, 0),
        DA9052_LDO(LDO1, 50, 600, 1800, 5, 6, 0),
-       DA9052_LDO5_6(LDO2, 25, 600, 1800, 6, 6, DA9052_SUPPLY_VLDO2GO),
-       DA9052_LDO5_6(LDO3, 25, 1725, 3300, 6, 6, DA9052_SUPPLY_VLDO3GO),
+       DA9052_LDO(LDO2, 25, 600, 1800, 6, 6, DA9052_SUPPLY_VLDO2GO),
+       DA9052_LDO(LDO3, 25, 1725, 3300, 6, 6, DA9052_SUPPLY_VLDO3GO),
        DA9052_LDO(LDO4, 25, 1725, 3300, 6, 6, 0),
        DA9052_LDO(LDO5, 50, 1200, 3600, 6, 6, 0),
        DA9052_LDO(LDO6, 50, 1200, 3600, 6, 6, 0),
@@ -502,10 +360,10 @@ static struct da9052_regulator_info da9053_regulator_info[] = {
        DA9052_DCDC(BUCK1, 25, 500, 2075, 6, 6, DA9052_SUPPLY_VBCOREGO),
        DA9052_DCDC(BUCK2, 25, 500, 2075, 6, 6, DA9052_SUPPLY_VBPROGO),
        DA9052_DCDC(BUCK3, 25, 925, 2500, 6, 6, DA9052_SUPPLY_VBMEMGO),
-       DA9052_BUCKPERI(BUCK4, 25, 925, 2500, 6, 6, 0),
+       DA9052_DCDC(BUCK4, 25, 925, 2500, 6, 6, 0),
        DA9052_LDO(LDO1, 50, 600, 1800, 5, 6, 0),
-       DA9052_LDO5_6(LDO2, 25, 600, 1800, 6, 6, DA9052_SUPPLY_VLDO2GO),
-       DA9052_LDO5_6(LDO3, 25, 1725, 3300, 6, 6, DA9052_SUPPLY_VLDO3GO),
+       DA9052_LDO(LDO2, 25, 600, 1800, 6, 6, DA9052_SUPPLY_VLDO2GO),
+       DA9052_LDO(LDO3, 25, 1725, 3300, 6, 6, DA9052_SUPPLY_VLDO3GO),
        DA9052_LDO(LDO4, 25, 1725, 3300, 6, 6, 0),
        DA9052_LDO(LDO5, 50, 1200, 3600, 6, 6, 0),
        DA9052_LDO(LDO6, 50, 1200, 3600, 6, 6, 0),