* Careful if you change match 2 request!
* The interrupt handler is called directly from the low level dispatch code.
*/
-au1xxx_irq_map_t __initdata au1xxx_ic0_map[] = {
+struct au1xxx_irqmap __initdata au1xxx_ic0_map[] = {
#if defined(CONFIG_SOC_AU1000)
{ AU1000_UART0_INT, INTC_INT_HIGH_LEVEL, 0},
{
int i;
unsigned long cp0_status;
- au1xxx_irq_map_t *imp;
- extern au1xxx_irq_map_t au1xxx_irq_map[];
- extern au1xxx_irq_map_t au1xxx_ic0_map[];
+ struct au1xxx_irqmap *imp;
+ extern struct au1xxx_irqmap au1xxx_irq_map[];
+ extern struct au1xxx_irqmap au1xxx_ic0_map[];
extern int au1xxx_nr_irqs;
extern int au1xxx_ic0_nr_irqs;
#endif
-au1xxx_irq_map_t __initdata au1xxx_irq_map[] = {
+struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
#ifndef CONFIG_MIPS_MIRAGE
#ifdef CONFIG_MIPS_DB1550
[7] = { -1, INTD, INTC, INTX, INTX}, /* IDSEL 07 - AdapterD-Slot1 (bottom) */
};
-au1xxx_irq_map_t __initdata au1xxx_irq_map[] = {
+struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
{ AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0},
{ AU1500_GPIO_201, INTC_INT_LOW_LEVEL, 0 },
{ AU1500_GPIO_202, INTC_INT_LOW_LEVEL, 0 },
#include <asm/system.h>
#include <asm/mach-au1x00/au1000.h>
-au1xxx_irq_map_t __initdata au1xxx_irq_map[] = {
+struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
{ AU1000_GPIO_15, INTC_INT_LOW_LEVEL, 0 },
};
#include <asm/system.h>
#include <asm/mach-au1x00/au1000.h>
-au1xxx_irq_map_t __initdata au1xxx_irq_map[] = {
+struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
{ AU1000_GPIO_9, INTC_INT_LOW_LEVEL, 0 }, // PCMCIA Card Fully_Interted#
{ AU1000_GPIO_10, INTC_INT_LOW_LEVEL, 0 }, // PCMCIA Card STSCHG#
{ AU1000_GPIO_11, INTC_INT_LOW_LEVEL, 0 }, // PCMCIA Card IRQ#
#define PB1200_INT_END DB1200_INT_END
#endif
-au1xxx_irq_map_t __initdata au1xxx_irq_map[] = {
+struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
{ AU1000_GPIO_7, INTC_INT_LOW_LEVEL, 0 }, // This is exteranl interrupt cascade
};
[13] = { -1, INTA, INTB, INTC, INTD}, /* IDSEL 13 - PCI slot */
};
-au1xxx_irq_map_t __initdata au1xxx_irq_map[] = {
+struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
{ AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0},
{ AU1500_GPIO_201, INTC_INT_LOW_LEVEL, 0 },
{ AU1500_GPIO_202, INTC_INT_LOW_LEVEL, 0 },
[13] = { -1, INTA, INTB, INTC, INTD}, /* IDSEL 13 - PCI slot 1 (right) */
};
-au1xxx_irq_map_t __initdata au1xxx_irq_map[] = {
+struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
{ AU1000_GPIO_0, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_GPIO_1, INTC_INT_LOW_LEVEL, 0 },
};
#include <asm/system.h>
#include <asm/au1000.h>
-au1xxx_irq_map_t __initdata au1xxx_irq_map[] = {
+struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
{ AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0},
{ AU1500_GPIO_201, INTC_INT_LOW_LEVEL, 0 },
{ AU1500_GPIO_202, INTC_INT_LOW_LEVEL, 0 },
/*
* Every board describes its IRQ mapping with this table.
*/
-typedef struct au1xxx_irqmap {
+struct au1xxx_irqmap {
int im_irq;
int im_type;
int im_request;
-} au1xxx_irq_map_t;
+};
/*
* init_IRQ looks for a table with this name.
*/
-extern au1xxx_irq_map_t au1xxx_irq_map[];
+extern struct au1xxx_irqmap au1xxx_irq_map[];
#endif /* !defined (_LANGUAGE_ASSEMBLY) */