xhci: clear usb2 resume related variables in one place.

Initially resume related USB2 variables were cleared once port
successfully resumed to U0. Later code was added to clean up
stale resume variables in case of port failed to resume to U0.

Clear the variables in one place after port is no longer resuming
or in suspended U3 state.

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20230202150505.618915-11-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index a2053aa9b4a9e7c48bd4df6de4f2d597a0137400..541ccc45ea51fc60a26ecd4a480d350f45a5257a 100644 (file)
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -1090,7 +1090,6 @@ static void xhci_get_usb2_port_status(struct xhci_port *port, u32 *status,
        struct xhci_bus_state *bus_state;
        u32 link_state;
        u32 portnum;
-       int ret;
 
        bus_state = &port->rhub->bus_state;
        link_state = portsc & PORT_PLS_MASK;
@@ -1106,23 +1105,30 @@ static void xhci_get_usb2_port_status(struct xhci_port *port, u32 *status,
                if (link_state == XDEV_U2)
                        *status |= USB_PORT_STAT_L1;
                if (link_state == XDEV_U0) {
-                       if (port->resume_timestamp)
-                               usb_hcd_end_port_resume(&port->rhub->hcd->self,
-                                                       portnum);
-                       port->resume_timestamp = 0;
-                       clear_bit(portnum, &bus_state->resuming_ports);
                        if (bus_state->suspended_ports & (1 << portnum)) {
                                bus_state->suspended_ports &= ~(1 << portnum);
                                bus_state->port_c_suspend |= 1 << portnum;
                        }
                }
                if (link_state == XDEV_RESUME) {
-                       ret = xhci_handle_usb2_port_link_resume(port, status,
-                                                               portsc, flags);
-                       if (ret)
-                               return;
+                       xhci_handle_usb2_port_link_resume(port, status, portsc,
+                                                         flags);
                }
        }
+
+       /*
+        * Clear usb2 resume signalling variables if port is no longer suspended
+        * or resuming. Port either resumed to U0/U1/U2, disconnected, or in a
+        * error state. Resume related variables should be cleared in all those cases.
+        */
+       if ((link_state != XDEV_U3 &&
+            link_state != XDEV_RESUME) &&
+           (port->resume_timestamp ||
+            test_bit(portnum, &bus_state->resuming_ports))) {
+               port->resume_timestamp = 0;
+               clear_bit(portnum, &bus_state->resuming_ports);
+               usb_hcd_end_port_resume(&port->rhub->hcd->self, portnum);
+       }
 }
 
 /*
@@ -1177,18 +1183,6 @@ static u32 xhci_get_port_status(struct usb_hcd *hcd,
        else
                xhci_get_usb2_port_status(port, &status, raw_port_status,
                                          flags);
-       /*
-        * Clear stale usb2 resume signalling variables in case port changed
-        * state during resume signalling. For example on error
-        */
-       if ((port->resume_timestamp ||
-            test_bit(wIndex, &bus_state->resuming_ports)) &&
-           (raw_port_status & PORT_PLS_MASK) != XDEV_U3 &&
-           (raw_port_status & PORT_PLS_MASK) != XDEV_RESUME) {
-               port->resume_timestamp = 0;
-               clear_bit(wIndex, &bus_state->resuming_ports);
-               usb_hcd_end_port_resume(&hcd->self, wIndex);
-       }
 
        if (bus_state->port_c_suspend & (1 << wIndex))
                status |= USB_PORT_STAT_C_SUSPEND << 16;