[POWERPC] 4xx: Improve support for 4xx indirect DCRs

Accessing indirect DCRs is done via a pair of address/data DCRs.

Such accesses are thus inherently racy, vs. interrupts, preemption
and possibly SMP if 4xx SMP cores are ever used.

This updates the mfdcri/mtdcri macros in dcr-native.h (which were
so far unused) to use a spinlock.

In addition, add some common definitions to a new dcr-regs.h file.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>

diff --git a/include/asm-powerpc/dcr-native.h b/include/asm-powerpc/dcr-native.h
index 8dbb1ab..af5fb31 100644 (file)
--- a/include/asm-powerpc/dcr-native.h
+++ b/include/asm-powerpc/dcr-native.h
@@ -22,6 +22,8 @@
 #ifdef __KERNEL__
 #ifndef __ASSEMBLY__
 
+#include <linux/spinlock.h>
+
 typedef struct {
        unsigned int base;
 } dcr_host_t;
@@ -55,20 +57,28 @@ do {                                                                \
 } while (0)
 
 /* R/W of indirect DCRs make use of standard naming conventions for DCRs */
-#define mfdcri(base, reg)                      \
-({                                             \
-       mtdcr(base ## _CFGADDR, base ## _ ## reg);      \
-       mfdcr(base ## _CFGDATA);                        \
+extern spinlock_t dcr_ind_lock;
+
+#define mfdcri(base, reg)                              \
+({                                                     \
+       unsigned long flags;                            \
+       unsigned int val;                               \
+       spin_lock_irqsave(&dcr_ind_lock, flags);        \
+       mtdcr(DCRN_ ## base ## _CONFIG_ADDR, reg);      \
+       val = mfdcr(DCRN_ ## base ## _CONFIG_DATA);     \
+       spin_unlock_irqrestore(&dcr_ind_lock, flags);   \
+       val;                                            \
 })
 
-#define mtdcri(base, reg, data)                        \
-do {                                           \
-       mtdcr(base ## _CFGADDR, base ## _ ## reg);      \
-       mtdcr(base ## _CFGDATA, data);          \
+#define mtdcri(base, reg, data)                                \
+do {                                                   \
+       unsigned long flags;                            \
+       spin_lock_irqsave(&dcr_ind_lock, flags);        \
+       mtdcr(DCRN_ ## base ## _CONFIG_ADDR, reg);      \
+       mtdcr(DCRN_ ## base ## _CONFIG_DATA, data);     \
+       spin_unlock_irqrestore(&dcr_ind_lock, flags);   \
 } while (0)
 
 #endif /* __ASSEMBLY__ */
 #endif /* __KERNEL__ */
 #endif /* _ASM_POWERPC_DCR_NATIVE_H */
-
-

diff --git a/include/asm-powerpc/dcr-regs.h b/include/asm-powerpc/dcr-regs.h
new file mode 100644 (file)
index 0000000..9f1fb98
--- /dev/null
+++ b/include/asm-powerpc/dcr-regs.h
@@ -0,0 +1,71 @@
+/*
+ * Common DCR / SDR / CPR register definitions used on various IBM/AMCC
+ * 4xx processors
+ *
+ *    Copyright 2007 Benjamin Herrenschmidt, IBM Corp
+ *                   <benh@kernel.crashing.org>
+ *
+ * Mostly lifted from asm-ppc/ibm4xx.h by
+ *
+ *    Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu>
+ *
+ */
+
+#ifndef __DCR_REGS_H__
+#define __DCR_REGS_H__
+
+/*
+ * Most DCRs used for controlling devices such as the MAL, DMA engine,
+ * etc... are obtained for the device tree.
+ *
+ * The definitions in this files are fixed DCRs and indirect DCRs that
+ * are commonly used outside of specific drivers or refer to core
+ * common registers that may occasionally have to be tweaked outside
+ * of the driver main register set
+ */
+
+/* CPRs (440GX and 440SP/440SPe) */
+#define DCRN_CPR0_CONFIG_ADDR  0xc
+#define DCRN_CPR0_CONFIG_DATA  0xd
+
+/* SDRs (440GX and 440SP/440SPe) */
+#define DCRN_SDR0_CONFIG_ADDR  0xe
+#define DCRN_SDR0_CONFIG_DATA  0xf
+
+#define SDR0_PFC0              0x4100
+#define SDR0_PFC1              0x4101
+#define SDR0_PFC1_EPS          0x1c00000
+#define SDR0_PFC1_EPS_SHIFT    22
+#define SDR0_PFC1_RMII         0x02000000
+#define SDR0_MFR               0x4300
+#define SDR0_MFR_TAH0          0x80000000      /* TAHOE0 Enable */
+#define SDR0_MFR_TAH1          0x40000000      /* TAHOE1 Enable */
+#define SDR0_MFR_PCM           0x10000000      /* PPC440GP irq compat mode */
+#define SDR0_MFR_ECS           0x08000000      /* EMAC int clk */
+#define SDR0_MFR_T0TXFL                0x00080000
+#define SDR0_MFR_T0TXFH                0x00040000
+#define SDR0_MFR_T1TXFL                0x00020000
+#define SDR0_MFR_T1TXFH                0x00010000
+#define SDR0_MFR_E0TXFL                0x00008000
+#define SDR0_MFR_E0TXFH                0x00004000
+#define SDR0_MFR_E0RXFL                0x00002000
+#define SDR0_MFR_E0RXFH                0x00001000
+#define SDR0_MFR_E1TXFL                0x00000800
+#define SDR0_MFR_E1TXFH                0x00000400
+#define SDR0_MFR_E1RXFL                0x00000200
+#define SDR0_MFR_E1RXFH                0x00000100
+#define SDR0_MFR_E2TXFL                0x00000080
+#define SDR0_MFR_E2TXFH                0x00000040
+#define SDR0_MFR_E2RXFL                0x00000020
+#define SDR0_MFR_E2RXFH                0x00000010
+#define SDR0_MFR_E3TXFL                0x00000008
+#define SDR0_MFR_E3TXFH                0x00000004
+#define SDR0_MFR_E3RXFL                0x00000002
+#define SDR0_MFR_E3RXFH                0x00000001
+#define SDR0_UART0             0x0120
+#define SDR0_UART1             0x0121
+#define SDR0_UART2             0x0122
+#define SDR0_UART3             0x0123
+#define SDR0_CUST0             0x4000
+
+#endif /* __DCR_REGS_H__ */