ARM: dts: ipq8074: Enable few peripherals for hk01 board

Reviewed-by: Abhishek Sahu <absahu@codeaurora.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sricharan R <sricharan@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>

diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
index 72c5b4a..c13ddee 100644 (file)
--- a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
+++ b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
@@ -21,6 +21,7 @@
 
        aliases {
                serial0 = &blsp1_uart5;
+               serial1 = &blsp1_uart3;
        };
 
        chosen {
@@ -36,5 +37,58 @@
                serial@78b3000 {
                        status = "ok";
                };
+
+               spi@78b5000 {
+                       status = "ok";
+
+                       m25p80@0 {
+                                 #address-cells = <1>;
+                                 #size-cells = <1>;
+                                 compatible = "jedec,spi-nor";
+                                 reg = <0>;
+                                 spi-max-frequency = <50000000>;
+                       };
+               };
+
+               serial@78b1000 {
+                        status = "ok";
+               };
+
+               i2c@78b6000 {
+                        status = "ok";
+               };
+
+               dma@7984000 {
+                        status = "ok";
+               };
+
+               nand@79b0000 {
+                       status = "ok";
+
+                       nand@0 {
+                               reg = <0>;
+                               nand-ecc-strength = <4>;
+                               nand-ecc-step-size = <512>;
+                               nand-bus-width = <8>;
+                       };
+               };
+
+               phy@86000 {
+                       status = "ok";
+               };
+
+               phy@8e000 {
+                       status = "ok";
+               };
+
+               pci@20000000 {
+                       status = "ok";
+                       perst-gpio = <&tlmm 58 0x1>;
+               };
+
+               pci@10000000 {
+                       status = "ok";
+                       perst-gpio = <&tlmm 61 0x1>;
+               };
        };
 };