sunxi-mmc: use new mode on both controllers on A64

Using new mode improves stability of eMMC and SD cards. Without
it SPL fails to load u-boot from SD on Pinebook.

Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Tested-by: Jagan Teki <jagan@amarulasolutions.com> # Amarula A64-Relic
Reviewed-by: Jagan Teki <jagan@openedev.com>

diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
index 66fff6c..3c54f51 100644 (file)
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -282,6 +282,7 @@ config MACH_SUN50I
        select SUN6I_PRCM
        select SUNXI_DE2
        select SUNXI_GEN_SUN6I
+       select MMC_SUNXI_HAS_NEW_MODE
        select SUPPORT_SPL
        select SUNXI_DRAM_DW
        select SUNXI_DRAM_DW_32BIT

diff --git a/drivers/mmc/sunxi_mmc.c b/drivers/mmc/sunxi_mmc.c
index e50b2c3..9bf040c 100644 (file)
--- a/drivers/mmc/sunxi_mmc.c
+++ b/drivers/mmc/sunxi_mmc.c
@@ -98,12 +98,16 @@ static int mmc_resource_init(int sdc_no)
 static int mmc_set_mod_clk(struct sunxi_mmc_priv *priv, unsigned int hz)
 {
        unsigned int pll, pll_hz, div, n, oclk_dly, sclk_dly;
-       bool new_mode = false;
+       bool new_mode = true;
        bool calibrate = false;
        u32 val = 0;
 
-       if (IS_ENABLED(CONFIG_MMC_SUNXI_HAS_NEW_MODE) && (priv->mmc_no == 2))
-               new_mode = true;
+       if (!IS_ENABLED(CONFIG_MMC_SUNXI_HAS_NEW_MODE))
+               new_mode = false;
+
+       /* A83T support new mode only on eMMC */
+       if (IS_ENABLED(CONFIG_MACH_SUN8I_A83T) && priv->mmc_no != 2)
+               new_mode = false;
 
 #if defined(CONFIG_MACH_SUN50I) || defined(CONFIG_MACH_SUN50I_H6)
        calibrate = true;