omap: mux: Make omap2 FS USB code use new mux functions

Make omap2 FS USB code use new mux functions. Do not mux usb2_tllse0
as it has multiple options.

Cc: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>

diff --git a/arch/arm/mach-omap2/usb-fs.c b/arch/arm/mach-omap2/usb-fs.c
index a445519..a216d88 100644 (file)
--- a/arch/arm/mach-omap2/usb-fs.c
+++ b/arch/arm/mach-omap2/usb-fs.c
@@ -30,7 +30,6 @@
 #include <asm/irq.h>
 
 #include <plat/control.h>
-#include <plat/mux.h>
 #include <plat/usb.h>
 #include <plat/board.h>
 
@@ -40,6 +39,8 @@
 #define INT_USB_IRQ_HGEN       INT_24XX_USB_IRQ_HGEN
 #define INT_USB_IRQ_OTG                INT_24XX_USB_IRQ_OTG
 
+#include "mux.h"
+
 #if defined(CONFIG_ARCH_OMAP2)
 
 #ifdef CONFIG_USB_GADGET_OMAP
@@ -209,13 +210,13 @@ static u32 __init omap2_usb0_init(unsigned nwires, unsigned is_device)
                return 0;
 
        if (is_device)
-               omap_cfg_reg(J20_24XX_USB0_PUEN);
+               omap_mux_init_signal("usb0_puen", 0);
 
-       omap_cfg_reg(K18_24XX_USB0_DAT);
-       omap_cfg_reg(K19_24XX_USB0_TXEN);
-       omap_cfg_reg(J14_24XX_USB0_SE0);
+       omap_mux_init_signal("usb0_dat", 0);
+       omap_mux_init_signal("usb0_txen", 0);
+       omap_mux_init_signal("usb0_se0", 0);
        if (nwires != 3)
-               omap_cfg_reg(J18_24XX_USB0_RCV);
+               omap_mux_init_signal("usb0_rcv", 0);
 
        switch (nwires) {
        case 3:
@@ -228,8 +229,8 @@ static u32 __init omap2_usb0_init(unsigned nwires, unsigned is_device)
                break;
        case 6:
                syscon1 = 3;
-               omap_cfg_reg(J19_24XX_USB0_VP);
-               omap_cfg_reg(K20_24XX_USB0_VM);
+               omap_mux_init_signal("usb0_vp", 0);
+               omap_mux_init_signal("usb0_vm", 0);
                omap2_usb_devconf_set(0, USB_UNIDIR);
                break;
        default:
@@ -289,12 +290,12 @@ static u32 __init omap2_usb2_init(unsigned nwires, unsigned alt_pingroup)
        if (alt_pingroup || nwires == 0)
                return 0;
 
-       omap_cfg_reg(Y11_24XX_USB2_DAT);
-       omap_cfg_reg(AA10_24XX_USB2_SE0);
+       omap_mux_init_signal("usb2_dat", 0);
+       omap_mux_init_signal("usb2_se0", 0);
        if (nwires > 2)
-               omap_cfg_reg(AA12_24XX_USB2_TXEN);
+               omap_mux_init_signal("usb2_txen", 0);
        if (nwires > 3)
-               omap_cfg_reg(AA6_24XX_USB2_RCV);
+               omap_mux_init_signal("usb2_rcv", 0);
 
        switch (nwires) {
        case 2:
@@ -313,11 +314,13 @@ static u32 __init omap2_usb2_init(unsigned nwires, unsigned alt_pingroup)
                omap2_usb_devconf_set(2, USB_BIDIR);
                break;
        case 5:
-               omap_cfg_reg(AA4_24XX_USB2_TLLSE0);
-               /* NOTE: board-specific code must override this setting if
-                * this TLL link is not using DP/DM.  Something must also
+               /* NOTE: board-specific code must mux this setting depending
+                * on TLL link using DP/DM.  Something must also
                 * set up OTG_SYSCON2.HMC_TLL{ATTACH,SPEED}
+                * 2420: hdq_sio.usb2_tllse0 or vlynq_rx0.usb2_tllse0
+                * 2430: hdq_sio.usb2_tllse0 or sdmmc2_dat0.usb2_tllse0
                 */
+
                syscon1 = 3;
                omap2_usb2_enable_5pinunitll();
                break;