/* Similar iterators for the low-level breakpoints. */
-#define ALL_BP_LOCATIONS(B) for (B = bp_location_chain; B; B = B->next)
+#define ALL_BP_LOCATIONS(B) for (B = bp_location_chain; B; B = B->global_next)
#define ALL_BP_LOCATIONS_SAFE(B,TMP) \
for (B = bp_location_chain; \
- B ? (TMP=B->next, 1): 0; \
+ B ? (TMP=B->global_next, 1): 0; \
B = TMP)
/* True if breakpoint hit counts should be displayed in breakpoint info. */
static int
breakpoint_enabled (struct breakpoint *b)
{
- return (b->enable_state == bp_enabled && !b->pending);
+ return (b->enable_state == bp_enabled);
}
/* Set breakpoint count to NUM. */
if (b->number == bnum)
{
struct bp_location *loc = b->loc;
- if (loc->cond)
+ for (; loc; loc = loc->next)
{
- xfree (loc->cond);
- loc->cond = 0;
+ if (loc->cond)
+ {
+ xfree (loc->cond);
+ loc->cond = 0;
+ }
}
if (b->cond_string != NULL)
xfree (b->cond_string);
/* I don't know if it matters whether this is the string the user
typed in or the decompiled expression. */
b->cond_string = savestring (arg, strlen (arg));
- if (!b->pending)
+ b->condition_not_parsed = 0;
+ for (loc = b->loc; loc; loc = loc->next)
{
- b->loc->cond = parse_exp_1 (&arg,
- block_for_pc (b->loc->address), 0);
+ arg = p;
+ loc->cond = parse_exp_1 (&arg, block_for_pc (loc->address), 0);
if (*arg)
error (_("Junk at end of expression"));
}
if (!breakpoint_enabled (bpt->owner))
return 0;
- if (bpt->inserted || bpt->duplicate)
+ if (!bpt->enabled || bpt->shlib_disabled || bpt->inserted || bpt->duplicate)
return 0;
/* Initialize the target-specific information. */
{
/* See also: disable_breakpoints_in_shlibs. */
val = 0;
- bpt->owner->enable_state = bp_shlib_disabled;
+ bpt->shlib_disabled = 1;
if (!*disabled_breaks)
{
fprintf_unfiltered (tmp_error_stream,
if (bpt->loc_type != bp_loc_software_breakpoint)
continue;
- if ((breakpoint_enabled (bpt->owner)
- || bpt->owner->enable_state == bp_permanent)
- && bpt->inserted
+ if (bpt->inserted
&& bpt->address == pc) /* bp is enabled and matches pc */
{
if (overlay_debugging
{
struct cleanup *old_chain, *ui_out_chain;
struct breakpoint *b;
+ struct bp_location *bl;
struct ui_stream *stb;
stb = ui_out_stream_new (uiout);
old_chain = make_cleanup_ui_out_stream_delete (stb);
which has since been deleted. */
if (bs->breakpoint_at == NULL)
return PRINT_UNKNOWN;
- b = bs->breakpoint_at->owner;
+ bl = bs->breakpoint_at;
+ b = bl->owner;
switch (b->type)
{
case bp_breakpoint:
case bp_hardware_breakpoint:
- if (b->loc->address != b->loc->requested_address)
- breakpoint_adjustment_warning (b->loc->requested_address,
- b->loc->address,
+ if (bl->address != bl->requested_address)
+ breakpoint_adjustment_warning (bl->requested_address,
+ bl->address,
b->number, 1);
annotate_breakpoint (b->number);
ui_out_text (uiout, "\nBreakpoint ");
bpstat
bpstat_stop_status (CORE_ADDR bp_addr, ptid_t ptid, int stopped_by_watchpoint)
{
- struct breakpoint *b, *temp;
+ struct breakpoint *b = NULL;
+ struct bp_location *bl;
/* True if we've hit a breakpoint (as opposed to a watchpoint). */
int real_breakpoint = 0;
/* Root of the chain of bpstat's */
bpstat bs = root_bs;
int thread_id = pid_to_thread_id (ptid);
- ALL_BREAKPOINTS_SAFE (b, temp)
+ ALL_BP_LOCATIONS (bl)
{
+ b = bl->owner;
+ gdb_assert (b);
if (!breakpoint_enabled (b) && b->enable_state != bp_permanent)
continue;
&& b->type != bp_catch_catch
&& b->type != bp_catch_throw) /* a non-watchpoint bp */
{
- if (b->loc->address != bp_addr) /* address doesn't match */
+ if (bl->address != bp_addr) /* address doesn't match */
continue;
if (overlay_debugging /* unmapped overlay section */
- && section_is_overlay (b->loc->section)
- && !section_is_mapped (b->loc->section))
+ && section_is_overlay (bl->section)
+ && !section_is_mapped (bl->section))
continue;
}
if (b->type == bp_hardware_breakpoint)
{
- if (b->loc->address != bp_addr)
+ if (bl->address != bp_addr)
continue;
if (overlay_debugging /* unmapped overlay section */
- && section_is_overlay (b->loc->section)
- && !section_is_mapped (b->loc->section))
+ && section_is_overlay (bl->section)
+ && !section_is_mapped (bl->section))
continue;
}
/* Come here if it's a watchpoint, or if the break address matches */
- bs = bpstat_alloc (b->loc, bs); /* Alloc a bpstat to explain stop */
+ bs = bpstat_alloc (bl, bs); /* Alloc a bpstat to explain stop */
/* Watchpoints may change this, if not found to have triggered. */
bs->stop = 1;
{
int value_is_zero = 0;
- if (b->loc->cond)
+ if (bl->cond)
{
/* Need to select the frame, with all that implies
so that the conditions will have the right context. */
select_frame (get_current_frame ());
value_is_zero
- = catch_errors (breakpoint_cond_eval, (b->loc->cond),
+ = catch_errors (breakpoint_cond_eval, (bl->cond),
"Error in testing breakpoint condition:\n",
RETURN_MASK_ALL);
/* FIXME-someday, should give breakpoint # */
free_all_values ();
}
- if (b->loc->cond && value_is_zero)
+ if (bl->cond && value_is_zero)
{
bs->stop = 0;
/* Don't consider this a hit. */
/* The value of a hardware watchpoint hasn't changed, but the
intermediate memory locations we are watching may have. */
if (bs && !bs->stop &&
- (bs->breakpoint_at->owner->type == bp_hardware_watchpoint ||
- bs->breakpoint_at->owner->type == bp_read_watchpoint ||
- bs->breakpoint_at->owner->type == bp_access_watchpoint))
+ (b->type == bp_hardware_watchpoint ||
+ b->type == bp_read_watchpoint ||
+ b->type == bp_access_watchpoint))
{
remove_breakpoints ();
insert_breakpoints ();
*cp_list = bs;
}
+static void print_breakpoint_location (struct breakpoint *b,
+ struct bp_location *loc,
+ char *wrap_indent,
+ struct ui_stream *stb)
+{
+ if (b->source_file)
+ {
+ struct symbol *sym
+ = find_pc_sect_function (loc->address, loc->section);
+ if (sym)
+ {
+ ui_out_text (uiout, "in ");
+ ui_out_field_string (uiout, "func",
+ SYMBOL_PRINT_NAME (sym));
+ ui_out_wrap_hint (uiout, wrap_indent);
+ ui_out_text (uiout, " at ");
+ }
+ ui_out_field_string (uiout, "file", b->source_file);
+ ui_out_text (uiout, ":");
+
+ if (ui_out_is_mi_like_p (uiout))
+ {
+ struct symtab_and_line sal = find_pc_line (loc->address, 0);
+ char *fullname = symtab_to_fullname (sal.symtab);
+
+ if (fullname)
+ ui_out_field_string (uiout, "fullname", fullname);
+ }
+
+ ui_out_field_int (uiout, "line", b->line_number);
+ }
+ else if (!b->loc)
+ {
+ ui_out_field_string (uiout, "pending", b->addr_string);
+ }
+ else
+ {
+ print_address_symbolic (loc->address, stb->stream, demangle, "");
+ ui_out_field_stream (uiout, "at", stb);
+ }
+}
+
/* Print B to gdb_stdout. */
static void
-print_one_breakpoint (struct breakpoint *b,
- CORE_ADDR *last_addr)
+print_one_breakpoint_location (struct breakpoint *b,
+ struct bp_location *loc,
+ int loc_number,
+ CORE_ADDR *last_addr)
{
struct command_line *l;
struct symbol *sym;
struct cleanup *old_chain = make_cleanup_ui_out_stream_delete (stb);
struct cleanup *bkpt_chain;
+ int header_of_multiple = 0;
+ int part_of_multiple = (loc != NULL);
+
+ gdb_assert (!loc || loc_number != 0);
+ /* See comment in print_one_breakpoint concerning
+ treatment of breakpoints with single disabled
+ location. */
+ if (loc == NULL
+ && (b->loc != NULL
+ && (b->loc->next != NULL || !b->loc->enabled)))
+ header_of_multiple = 1;
+ if (loc == NULL)
+ loc = b->loc;
+
annotate_record ();
bkpt_chain = make_cleanup_ui_out_tuple_begin_end (uiout, "bkpt");
/* 1 */
annotate_field (0);
- ui_out_field_int (uiout, "number", b->number);
+ if (part_of_multiple)
+ {
+ char *formatted;
+ asprintf (&formatted, "%d.%d", b->number, loc_number);
+ ui_out_field_string (uiout, "number", formatted);
+ xfree (formatted);
+ }
+ else
+ {
+ ui_out_field_int (uiout, "number", b->number);
+ }
/* 2 */
annotate_field (1);
- if (((int) b->type >= (sizeof (bptypes) / sizeof (bptypes[0])))
- || ((int) b->type != bptypes[(int) b->type].type))
- internal_error (__FILE__, __LINE__,
- _("bptypes table does not describe type #%d."),
- (int) b->type);
- ui_out_field_string (uiout, "type", bptypes[(int) b->type].description);
+ if (part_of_multiple)
+ ui_out_field_skip (uiout, "type");
+ else
+ {
+ if (((int) b->type >= (sizeof (bptypes) / sizeof (bptypes[0])))
+ || ((int) b->type != bptypes[(int) b->type].type))
+ internal_error (__FILE__, __LINE__,
+ _("bptypes table does not describe type #%d."),
+ (int) b->type);
+ ui_out_field_string (uiout, "type", bptypes[(int) b->type].description);
+ }
/* 3 */
annotate_field (2);
- ui_out_field_string (uiout, "disp", bpdisps[(int) b->disposition]);
+ if (part_of_multiple)
+ ui_out_field_skip (uiout, "disp");
+ else
+ ui_out_field_string (uiout, "disp", bpdisps[(int) b->disposition]);
+
/* 4 */
annotate_field (3);
- ui_out_field_fmt (uiout, "enabled", "%c", bpenables[(int) b->enable_state]);
- ui_out_spaces (uiout, 2);
+ if (part_of_multiple)
+ ui_out_field_string (uiout, "enabled",
+ loc->shlib_disabled
+ ? (loc->enabled ? "y(p)" : "n(p)")
+ : (loc->enabled ? "y" : "n"));
+ else
+ {
+ int pending = (b->loc == NULL || b->loc->shlib_disabled);
+ /* For header of multiple, there's no point showing pending
+ state -- it will be apparent from the locations. */
+ if (header_of_multiple)
+ pending = 0;
+ ui_out_field_fmt (uiout, "enabled", "%c%s",
+ bpenables[(int) b->enable_state],
+ pending ? "(p)" : "");
+ if (!pending)
+ ui_out_spaces (uiout, 3);
+ }
+
/* 5 and 6 */
strcpy (wrap_indent, " ");
}
if (b->ops != NULL && b->ops->print_one != NULL)
- b->ops->print_one (b, last_addr);
+ {
+ /* Although the print_one can possibly print
+ all locations, calling it here is not likely
+ to get any nice result. So, make sure there's
+ just one location. */
+ gdb_assert (b->loc == NULL || b->loc->next == NULL);
+ b->ops->print_one (b, last_addr);
+ }
else
switch (b->type)
{
if (addressprint)
{
annotate_field (4);
- if (b->pending)
+ if (b->loc == NULL)
ui_out_field_string (uiout, "addr", "<PENDING>");
+ else if (header_of_multiple)
+ ui_out_field_string (uiout, "addr", "<MULTIPLE>");
else
- ui_out_field_core_addr (uiout, "addr", b->loc->address);
+ ui_out_field_core_addr (uiout, "addr", loc->address);
}
annotate_field (5);
- *last_addr = b->loc->address;
- if (b->source_file)
- {
- sym = find_pc_sect_function (b->loc->address, b->loc->section);
- if (sym)
- {
- ui_out_text (uiout, "in ");
- ui_out_field_string (uiout, "func",
- SYMBOL_PRINT_NAME (sym));
- ui_out_wrap_hint (uiout, wrap_indent);
- ui_out_text (uiout, " at ");
- }
- ui_out_field_string (uiout, "file", b->source_file);
- ui_out_text (uiout, ":");
-
- if (ui_out_is_mi_like_p (uiout))
- {
- struct symtab_and_line sal = find_pc_line (b->loc->address, 0);
- char *fullname = symtab_to_fullname (sal.symtab);
-
- if (fullname)
- ui_out_field_string (uiout, "fullname", fullname);
- }
-
- ui_out_field_int (uiout, "line", b->line_number);
- }
- else if (b->pending)
- {
- ui_out_field_string (uiout, "pending", b->addr_string);
- }
- else
- {
- print_address_symbolic (b->loc->address, stb->stream, demangle, "");
- ui_out_field_stream (uiout, "at", stb);
- }
+ if (!header_of_multiple)
+ print_breakpoint_location (b, loc, wrap_indent, stb);
+ if (b->loc)
+ *last_addr = b->loc->address;
break;
}
- if (b->thread != -1)
+ if (!part_of_multiple && b->thread != -1)
{
/* FIXME: This seems to be redundant and lost here; see the
"stop only in" line a little further down. */
ui_out_text (uiout, "\n");
- if (frame_id_p (b->frame_id))
+ if (part_of_multiple && frame_id_p (b->frame_id))
{
annotate_field (6);
ui_out_text (uiout, "\tstop only in stack frame at ");
ui_out_text (uiout, "\n");
}
- if (b->loc->cond && !ada_exception_catchpoint_p (b))
+ if (!part_of_multiple && b->cond_string && !ada_exception_catchpoint_p (b))
{
/* We do not print the condition for Ada exception catchpoints
because the condition is an internal implementation detail
that we do not want to expose to the user. */
annotate_field (7);
ui_out_text (uiout, "\tstop only if ");
- print_expression (b->loc->cond, stb->stream);
- ui_out_field_stream (uiout, "cond", stb);
- ui_out_text (uiout, "\n");
- }
-
- if (b->pending && b->cond_string)
- {
- annotate_field (7);
- ui_out_text (uiout, "\tstop only if ");
ui_out_field_string (uiout, "cond", b->cond_string);
ui_out_text (uiout, "\n");
}
- if (b->thread != -1)
+ if (!part_of_multiple && b->thread != -1)
{
/* FIXME should make an annotation for this */
ui_out_text (uiout, "\tstop only in thread ");
ui_out_text (uiout, "\n");
}
- if (show_breakpoint_hit_counts && b->hit_count)
+ if (!part_of_multiple && show_breakpoint_hit_counts && b->hit_count)
{
/* FIXME should make an annotation for this */
if (ep_is_catchpoint (b))
/* Output the count also if it is zero, but only if this is
mi. FIXME: Should have a better test for this. */
if (ui_out_is_mi_like_p (uiout))
- if (show_breakpoint_hit_counts && b->hit_count == 0)
+ if (!part_of_multiple && show_breakpoint_hit_counts && b->hit_count == 0)
ui_out_field_int (uiout, "times", b->hit_count);
- if (b->ignore_count)
+ if (!part_of_multiple && b->ignore_count)
{
annotate_field (8);
ui_out_text (uiout, "\tignore next ");
ui_out_text (uiout, " hits\n");
}
- if ((l = b->commands))
+ if (!part_of_multiple && (l = b->commands))
{
struct cleanup *script_chain;
do_cleanups (old_chain);
}
+static void
+print_one_breakpoint (struct breakpoint *b,
+ CORE_ADDR *last_addr)
+{
+ print_one_breakpoint_location (b, NULL, 0, last_addr);
+
+ /* If this breakpoint has custom print function,
+ it's already printed. Otherwise, print individual
+ locations, if any. */
+ if (b->ops == NULL || b->ops->print_one == NULL)
+ {
+ /* If breakpoint has a single location that is
+ disabled, we print it as if it had
+ several locations, since otherwise it's hard to
+ represent "breakpoint enabled, location disabled"
+ situation. */
+ if (b->loc
+ && (b->loc->next || !b->loc->enabled)
+ && !ui_out_is_mi_like_p (uiout))
+ {
+ struct bp_location *loc;
+ int n = 1;
+ for (loc = b->loc; loc; loc = loc->next, ++n)
+ print_one_breakpoint_location (b, loc, n, last_addr);
+ }
+ }
+}
+
+
struct captured_breakpoint_query_args
{
int bnum;
annotate_breakpoints_headers ();
if (nr_printable_breakpoints > 0)
annotate_field (0);
- ui_out_table_header (uiout, 3, ui_left, "number", "Num"); /* 1 */
+ ui_out_table_header (uiout, 7, ui_left, "number", "Num"); /* 1 */
if (nr_printable_breakpoints > 0)
annotate_field (1);
ui_out_table_header (uiout, 14, ui_left, "type", "Type"); /* 2 */
ui_out_table_header (uiout, 4, ui_left, "disp", "Disp"); /* 3 */
if (nr_printable_breakpoints > 0)
annotate_field (3);
- ui_out_table_header (uiout, 3, ui_left, "enabled", "Enb"); /* 4 */
+ ui_out_table_header (uiout, 4, ui_left, "enabled", "Enb"); /* 4 */
if (addressprint)
{
if (nr_printable_breakpoints > 0)
breakpoint_1 (bnum, 1);
}
+static int
+breakpoint_has_pc (struct breakpoint *b, CORE_ADDR pc, asection *section)
+{
+ struct bp_location *bl = b->loc;
+ for (; bl; bl = bl->next)
+ {
+ if (bl->address == pc
+ && (!overlay_debugging || bl->section == section))
+ return 1;
+ }
+ return 0;
+}
+
/* Print a message describing any breakpoints set at PC. */
static void
struct breakpoint *b;
ALL_BREAKPOINTS (b)
- if (b->loc->address == pc) /* address match / overlay match */
- if (!b->pending && (!overlay_debugging || b->loc->section == section))
- others++;
+ others += breakpoint_has_pc (b, pc, section);
if (others > 0)
{
if (others == 1)
else /* if (others == ???) */
printf_filtered (_("Note: breakpoints "));
ALL_BREAKPOINTS (b)
- if (b->loc->address == pc) /* address match / overlay match */
- if (!b->pending && (!overlay_debugging || b->loc->section == section))
- {
- others--;
- printf_filtered ("%d", b->number);
- if (b->thread == -1 && thread != -1)
- printf_filtered (" (all threads)");
- else if (b->thread != -1)
- printf_filtered (" (thread %d)", b->thread);
- printf_filtered ("%s%s ",
- ((b->enable_state == bp_disabled ||
- b->enable_state == bp_shlib_disabled ||
- b->enable_state == bp_call_disabled)
- ? " (disabled)"
- : b->enable_state == bp_permanent
- ? " (permanent)"
- : ""),
- (others > 1) ? ","
- : ((others == 1) ? " and" : ""));
- }
+ if (breakpoint_has_pc (b, pc, section))
+ {
+ others--;
+ printf_filtered ("%d", b->number);
+ if (b->thread == -1 && thread != -1)
+ printf_filtered (" (all threads)");
+ else if (b->thread != -1)
+ printf_filtered (" (thread %d)", b->thread);
+ printf_filtered ("%s%s ",
+ ((b->enable_state == bp_disabled ||
+ b->enable_state == bp_call_disabled)
+ ? " (disabled)"
+ : b->enable_state == bp_permanent
+ ? " (permanent)"
+ : ""),
+ (others > 1) ? ","
+ : ((others == 1) ? " and" : ""));
+ }
printf_filtered (_("also set at pc "));
deprecated_print_address_numeric (pc, 1, gdb_stdout);
printf_filtered (".\n");
that one the official one, and the rest as duplicates. */
static void
-check_duplicates (struct breakpoint *bpt)
+check_duplicates_for (CORE_ADDR address, asection *section)
{
struct bp_location *b;
int count = 0;
struct bp_location *perm_bp = 0;
- CORE_ADDR address = bpt->loc->address;
- asection *section = bpt->loc->section;
-
- if (! breakpoint_address_is_meaningful (bpt))
- return;
ALL_BP_LOCATIONS (b)
if (b->owner->enable_state != bp_disabled
- && b->owner->enable_state != bp_shlib_disabled
- && !b->owner->pending
&& b->owner->enable_state != bp_call_disabled
+ && b->enabled
+ && !b->shlib_disabled
&& b->address == address /* address / overlay match */
&& (!overlay_debugging || b->section == section)
&& breakpoint_address_is_meaningful (b->owner))
if (b != perm_bp)
{
if (b->owner->enable_state != bp_disabled
- && b->owner->enable_state != bp_shlib_disabled
- && !b->owner->pending
&& b->owner->enable_state != bp_call_disabled
+ && b->enabled && !b->shlib_disabled
&& b->address == address /* address / overlay match */
&& (!overlay_debugging || b->section == section)
&& breakpoint_address_is_meaningful (b->owner))
}
static void
+check_duplicates (struct breakpoint *bpt)
+{
+ struct bp_location *bl = bpt->loc;
+
+ if (! breakpoint_address_is_meaningful (bpt))
+ return;
+
+ for (; bl; bl = bl->next)
+ check_duplicates_for (bl->address, bl->section);
+}
+
+static void
breakpoint_adjustment_warning (CORE_ADDR from_addr, CORE_ADDR to_addr,
int bnum, int have_bnum)
{
loc->owner = bpt;
loc->cond = NULL;
+ loc->shlib_disabled = 0;
+ loc->enabled = 1;
switch (bp_type)
{
bp_location_chain = loc;
else
{
- while (loc_p->next)
- loc_p = loc_p->next;
- loc_p->next = loc;
+ while (loc_p->global_next)
+ loc_p = loc_p->global_next;
+ loc_p->global_next = loc;
}
return loc;
xfree (loc);
}
-/* set_raw_breakpoint() is a low level routine for allocating and
- partially initializing a breakpoint of type BPTYPE. The newly
- created breakpoint's address, section, source file name, and line
- number are provided by SAL. The newly created and partially
- initialized breakpoint is added to the breakpoint chain and
- is also returned as the value of this function.
-
- It is expected that the caller will complete the initialization of
- the newly created breakpoint struct as well as output any status
- information regarding the creation of a new breakpoint. In
- particular, set_raw_breakpoint() does NOT set the breakpoint
- number! Care should be taken to not allow an error() to occur
- prior to completing the initialization of the breakpoint. If this
- should happen, a bogus breakpoint will be left on the chain. */
+/* Helper to set_raw_breakpoint below. Creates a breakpoint
+ that has type BPTYPE and has no locations as yet. */
struct breakpoint *
-set_raw_breakpoint (struct symtab_and_line sal, enum bptype bptype)
+set_raw_breakpoint_without_location (enum bptype bptype)
{
struct breakpoint *b, *b1;
- CORE_ADDR adjusted_address;
b = (struct breakpoint *) xmalloc (sizeof (struct breakpoint));
memset (b, 0, sizeof (*b));
- /* Adjust the breakpoint's address prior to allocating a location.
- Once we call allocate_bp_location(), that mostly uninitialized
- location will be placed on the location chain. Adjustment of the
- breakpoint may cause read_memory_nobpt() to be called and we do
- not want its scan of the location chain to find a breakpoint and
- location that's only been partially initialized. */
- adjusted_address = adjust_breakpoint_address (sal.pc, bptype);
-
- b->loc = allocate_bp_location (b, bptype);
- b->loc->requested_address = sal.pc;
- b->loc->address = adjusted_address;
-
- if (sal.symtab == NULL)
- b->source_file = NULL;
- else
- b->source_file = savestring (sal.symtab->filename,
- strlen (sal.symtab->filename));
- b->loc->section = sal.section;
b->type = bptype;
b->language = current_language->la_language;
b->input_radix = input_radix;
b->thread = -1;
- b->line_number = sal.line;
b->enable_state = bp_enabled;
b->next = 0;
b->silent = 0;
b->forked_inferior_pid = 0;
b->exec_pathname = NULL;
b->ops = NULL;
- b->pending = 0;
+ b->condition_not_parsed = 0;
/* Add this breakpoint to the end of the chain
so that a list of breakpoints will come out in order
b1 = b1->next;
b1->next = b;
}
+ return b;
+}
+
+/* Initialize loc->function_name. */
+static void
+set_breakpoint_location_function (struct bp_location *loc)
+{
+ if (loc->owner->type == bp_breakpoint
+ || loc->owner->type == bp_hardware_breakpoint)
+ {
+ find_pc_partial_function (loc->address, &(loc->function_name),
+ NULL, NULL);
+ if (loc->function_name)
+ loc->function_name = xstrdup (loc->function_name);
+ }
+}
+
+/* set_raw_breakpoint is a low level routine for allocating and
+ partially initializing a breakpoint of type BPTYPE. The newly
+ created breakpoint's address, section, source file name, and line
+ number are provided by SAL. The newly created and partially
+ initialized breakpoint is added to the breakpoint chain and
+ is also returned as the value of this function.
+
+ It is expected that the caller will complete the initialization of
+ the newly created breakpoint struct as well as output any status
+ information regarding the creation of a new breakpoint. In
+ particular, set_raw_breakpoint does NOT set the breakpoint
+ number! Care should be taken to not allow an error to occur
+ prior to completing the initialization of the breakpoint. If this
+ should happen, a bogus breakpoint will be left on the chain. */
+
+struct breakpoint *
+set_raw_breakpoint (struct symtab_and_line sal, enum bptype bptype)
+{
+ struct breakpoint *b = set_raw_breakpoint_without_location (bptype);
+ CORE_ADDR adjusted_address;
+
+ /* Adjust the breakpoint's address prior to allocating a location.
+ Once we call allocate_bp_location(), that mostly uninitialized
+ location will be placed on the location chain. Adjustment of the
+ breakpoint may cause read_memory_nobpt() to be called and we do
+ not want its scan of the location chain to find a breakpoint and
+ location that's only been partially initialized. */
+ adjusted_address = adjust_breakpoint_address (sal.pc, bptype);
+
+ b->loc = allocate_bp_location (b, bptype);
+ b->loc->requested_address = sal.pc;
+ b->loc->address = adjusted_address;
+
+ if (sal.symtab == NULL)
+ b->source_file = NULL;
+ else
+ b->source_file = savestring (sal.symtab->filename,
+ strlen (sal.symtab->filename));
+ b->loc->section = sal.section;
+ b->line_number = sal.line;
+
+ set_breakpoint_location_function (b->loc);
check_duplicates (b);
breakpoints_changed ();
void
make_breakpoint_permanent (struct breakpoint *b)
{
+ struct bp_location *bl;
b->enable_state = bp_permanent;
- /* By definition, permanent breakpoints are already present in the code. */
- b->loc->inserted = 1;
+ /* By definition, permanent breakpoints are already present in the code.
+ Mark all locations as inserted. For now, make_breakpoint_permanent
+ is called in just one place, so it's hard to say if it's reasonable
+ to have permanent breakpoint with multiple locations or not,
+ but it's easy to implmement. */
+ for (bl = b->loc; bl; bl = bl->next)
+ bl->inserted = 1;
}
static struct breakpoint *
void
disable_breakpoints_in_shlibs (void)
{
- struct breakpoint *b;
+ struct bp_location *loc;
int disabled_shlib_breaks = 0;
- ALL_BREAKPOINTS (b)
+ ALL_BP_LOCATIONS (loc)
{
+ struct breakpoint *b = loc->owner;
+ /* We apply the check to all breakpoints, including disabled
+ for those with loc->duplicate set. This is so that when breakpoint
+ becomes enabled, or the duplicate is removed, gdb will try to insert
+ all breakpoints. If we don't set shlib_disabled here, we'll try
+ to insert those breakpoints and fail. */
if (((b->type == bp_breakpoint) || (b->type == bp_hardware_breakpoint))
- && breakpoint_enabled (b) && !b->loc->duplicate
+ && !loc->shlib_disabled
#ifdef PC_SOLIB
- && PC_SOLIB (b->loc->address)
+ && PC_SOLIB (loc->address)
#else
- && solib_address (b->loc->address)
+ && solib_address (loc->address)
#endif
)
- b->enable_state = bp_shlib_disabled;
+ {
+ loc->shlib_disabled = 1;
+ }
}
}
void
disable_breakpoints_in_unloaded_shlib (struct so_list *solib)
{
- struct breakpoint *b;
+ struct bp_location *loc;
int disabled_shlib_breaks = 0;
- ALL_BREAKPOINTS (b)
+ ALL_BP_LOCATIONS (loc)
{
- if ((b->loc->loc_type == bp_loc_hardware_breakpoint
- || b->loc->loc_type == bp_loc_software_breakpoint)
- && breakpoint_enabled (b) && !b->loc->duplicate)
+ struct breakpoint *b = loc->owner;
+ if ((loc->loc_type == bp_loc_hardware_breakpoint
+ || loc->loc_type == bp_loc_software_breakpoint)
+ && !loc->shlib_disabled)
{
#ifdef PC_SOLIB
- char *so_name = PC_SOLIB (b->loc->address);
+ char *so_name = PC_SOLIB (loc->address);
#else
- char *so_name = solib_address (b->loc->address);
+ char *so_name = solib_address (loc->address);
#endif
if (so_name && !strcmp (so_name, solib->so_name))
{
- b->enable_state = bp_shlib_disabled;
+ loc->shlib_disabled = 1;
/* At this point, we cannot rely on remove_breakpoint
succeeding so we must mark the breakpoint as not inserted
to prevent future errors occurring in remove_breakpoints. */
- b->loc->inserted = 0;
+ loc->inserted = 0;
if (!disabled_shlib_breaks)
{
target_terminal_ours_for_output ();
{
/* i18n: cagney/2005-02-11: Below needs to be merged into a
single string. */
- if (b->pending)
+ if (b->loc == NULL)
{
printf_filtered (_(" (%s) pending."), b->addr_string);
}
if (b->source_file)
printf_filtered (": file %s, line %d.",
b->source_file, b->line_number);
+
+ if (b->loc->next)
+ {
+ struct bp_location *loc = b->loc;
+ int n = 0;
+ for (; loc; loc = loc->next)
+ ++n;
+ printf_filtered (" (%d locations)", n);
+ }
+
}
}
do_cleanups (old_chain);
}
\f
+static struct bp_location *
+add_location_to_breakpoint (struct breakpoint *b, enum bptype bptype,
+ const struct symtab_and_line *sal)
+{
+ struct bp_location *loc, **tmp;
+
+ loc = allocate_bp_location (b, bptype);
+ for (tmp = &(b->loc); *tmp != NULL; tmp = &((*tmp)->next))
+ ;
+ *tmp = loc;
+ loc->requested_address = sal->pc;
+ loc->address = adjust_breakpoint_address (loc->requested_address,
+ bptype);
+ loc->section = sal->section;
+
+ set_breakpoint_location_function (loc);
+ return loc;
+}
/* Create a breakpoint with SAL as location. Use ADDR_STRING
as textual description of the location, and COND_STRING
create_breakpoints function. */
static void
-create_breakpoint (struct symtab_and_line sal, char *addr_string,
+create_breakpoint (struct symtabs_and_lines sals, char *addr_string,
char *cond_string,
enum bptype type, enum bpdisp disposition,
int thread, int ignore_count, int from_tty,
struct breakpoint *pending_bp)
{
- struct breakpoint *b;
+ struct breakpoint *b = NULL;
+ int i;
if (type == bp_hardware_breakpoint)
{
error (_("Hardware breakpoints used exceeds limit."));
}
- if (from_tty)
- describe_other_breakpoints (sal.pc, sal.section, thread);
-
- b = set_raw_breakpoint (sal, type);
- set_breakpoint_count (breakpoint_count + 1);
- b->number = breakpoint_count;
- b->thread = thread;
+ for (i = 0; i < sals.nelts; ++i)
+ {
+ struct symtab_and_line sal = sals.sals[i];
+ struct bp_location *loc;
+
+ if (from_tty)
+ describe_other_breakpoints (sal.pc, sal.section, thread);
+
+ if (i == 0)
+ {
+ b = set_raw_breakpoint (sal, type);
+ set_breakpoint_count (breakpoint_count + 1);
+ b->number = breakpoint_count;
+ b->thread = thread;
- b->cond_string = cond_string;
- b->ignore_count = ignore_count;
- b->enable_state = bp_enabled;
- b->disposition = disposition;
- /* If resolving a pending breakpoint, a check must be made to see if
- the user has specified a new condition or commands for the
- breakpoint. A new condition will override any condition that was
- initially specified with the initial breakpoint command. */
- if (pending_bp)
- {
- if (pending_bp->cond_string)
- b->cond_string = savestring (pending_bp->cond_string,
- strlen (pending_bp->cond_string));
-
- /* If there are commands associated with the breakpoint, they should
- be copied too. */
- if (pending_bp->commands)
- b->commands = copy_command_lines (pending_bp->commands);
-
- /* We have to copy over the ignore_count and thread as well. */
- b->ignore_count = pending_bp->ignore_count;
- b->thread = pending_bp->thread;
- }
+ b->cond_string = cond_string;
+ b->ignore_count = ignore_count;
+ b->enable_state = bp_enabled;
+ b->disposition = disposition;
- if (b->cond_string)
- {
- char *arg = b->cond_string;
- b->loc->cond = parse_exp_1 (&arg, block_for_pc (b->loc->address), 0);
- if (*arg)
+ loc = b->loc;
+ }
+ else
{
- if (pending_bp)
- error (_("Junk at end of pending breakpoint condition expression"));
- else
- error (_("Garbage %s follows condition"), arg);
+ loc = add_location_to_breakpoint (b, type, &sal);
+ }
+
+ if (b->cond_string)
+ {
+ char *arg = b->cond_string;
+ b->loc->cond = parse_exp_1 (&arg, block_for_pc (b->loc->address), 0);
+ if (*arg)
+ {
+ if (pending_bp)
+ error (_("Junk at end of pending breakpoint condition expression"));
+ else
+ error (_("Garbage %s follows condition"), arg);
+ }
}
- }
+ }
if (addr_string)
b->addr_string = addr_string;
int i;
for (i = 0; i < sals.nelts; ++i)
{
- create_breakpoint (sals.sals[i], addr_string[i],
+ struct symtabs_and_lines sals2;
+ sals2.sals = sals.sals + i;
+ sals2.nelts = 1;
+
+ create_breakpoint (sals2, addr_string[i],
cond_string, type, disposition,
thread, ignore_count, from_tty,
pending_bp);
make_cleanup (xfree, copy_arg);
- b = set_raw_breakpoint (sal, hardwareflag ? bp_hardware_breakpoint
- : bp_breakpoint);
+ b = set_raw_breakpoint_without_location (hardwareflag
+ ? bp_hardware_breakpoint
+ : bp_breakpoint);
set_breakpoint_count (breakpoint_count + 1);
b->number = breakpoint_count;
- b->loc->cond = NULL;
b->thread = thread;
b->addr_string = addr_string[0];
b->cond_string = cond_string;
b->ignore_count = ignore_count;
- b->pending = 1;
b->disposition = tempflag ? disp_del : disp_donttouch;
b->from_tty = from_tty;
b->flag = flag;
+ b->condition_not_parsed = 1;
mention (b);
}
struct cleanup *breakpoint_chain = NULL;
int i;
char **addr_string;
- char *cond_string;
+ char *cond_string = 0;
char *address_end;
cond = xcalloc (sals.nelts, sizeof (struct expression *));
make_cleanup (xfree, cond);
- /* Allocate space for all the cond strings. */
- cond_string = xcalloc (sals.nelts, sizeof (char **));
- make_cleanup (xfree, cond_string);
-
/* ----------------------------- SNIP -----------------------------
Anything added to the cleanup chain beyond this point is assumed
to be part of a breakpoint. If the breakpoint create goes
breakpoint chain, and add them to the 'found' chain. */
ALL_BREAKPOINTS_SAFE (b, tmp)
{
+ int match = 0;
/* Are we going to delete b? */
if (b->type != bp_none
&& b->type != bp_watchpoint
&& b->type != bp_hardware_watchpoint
&& b->type != bp_read_watchpoint
- && b->type != bp_access_watchpoint
- /* Not if b is a watchpoint of any sort... */
- && (((sal.pc && (b->loc->address == sal.pc))
- && (!section_is_overlay (b->loc->section)
- || b->loc->section == sal.section))
- /* Yes, if sal.pc matches b (modulo overlays). */
- || ((default_match || (0 == sal.pc))
- && b->source_file != NULL
- && sal.symtab != NULL
- && strcmp (b->source_file, sal.symtab->filename) == 0
- && b->line_number == sal.line)))
- /* Yes, if sal source file and line matches b. */
+ && b->type != bp_access_watchpoint)
+ {
+ struct bp_location *loc = b->loc;
+ for (; loc; loc = loc->next)
+ {
+ int pc_match = sal.pc
+ && (loc->address == sal.pc)
+ && (!section_is_overlay (loc->section)
+ || loc->section == sal.section);
+ int line_match = ((default_match || (0 == sal.pc))
+ && b->source_file != NULL
+ && sal.symtab != NULL
+ && strcmp (b->source_file, sal.symtab->filename) == 0
+ && b->line_number == sal.line);
+ if (pc_match || line_match)
+ {
+ match = 1;
+ break;
+ }
+ }
+ }
+
+ if (match)
{
/* Remove it from breakpoint_chain... */
if (b == breakpoint_chain)
}
}
+/* Remove locations of breakpoint BPT from
+ the global list of breakpoint locations. */
+
+static void
+unlink_locations_from_global_list (struct breakpoint *bpt)
+{
+ /* This code assumes that the locations
+ of a breakpoint are found in the global list
+ in the same order, but not necessary adjacent. */
+ struct bp_location **tmp = &bp_location_chain;
+ struct bp_location *here = bpt->loc;
+
+ if (here == NULL)
+ return;
+
+ for (; *tmp && here;)
+ {
+ if (*tmp == here)
+ {
+ *tmp = here->global_next;
+ here = here->next;
+ }
+ else
+ {
+ tmp = &((*tmp)->global_next);
+ }
+ }
+}
+
/* Delete a breakpoint and clean up all traces of it in the data
structures. */
deprecated_delete_breakpoint_hook (bpt);
breakpoint_delete_event (bpt->number);
- if (bpt->loc->inserted)
- remove_breakpoint (bpt->loc, mark_inserted);
+ for (loc = bpt->loc; loc; loc = loc->next)
+ {
+ if (loc->inserted)
+ remove_breakpoint (loc, mark_inserted);
+
+ free_valchain (loc);
+
+ if (loc->cond)
+ xfree (loc->cond);
- free_valchain (bpt->loc);
+ if (loc->function_name)
+ xfree (loc->function_name);
+ }
if (breakpoint_chain == bpt)
breakpoint_chain = bpt->next;
- if (bp_location_chain == bpt->loc)
- bp_location_chain = bpt->loc->next;
-
/* If we have callback-style exception catchpoints, don't go through
the adjustments to the C++ runtime library etc. if the inferior
isn't actually running. target_enable_exception_callback for a
break;
}
- ALL_BP_LOCATIONS (loc)
- if (loc->next == bpt->loc)
- {
- loc->next = bpt->loc->next;
- break;
- }
+ unlink_locations_from_global_list (bpt);
check_duplicates (bpt);
- /* If this breakpoint was inserted, and there is another breakpoint
- at the same address, we need to insert the other breakpoint. */
- if (bpt->loc->inserted
- && bpt->type != bp_hardware_watchpoint
+
+ if (bpt->type != bp_hardware_watchpoint
&& bpt->type != bp_read_watchpoint
&& bpt->type != bp_access_watchpoint
&& bpt->type != bp_catch_fork
&& bpt->type != bp_catch_vfork
&& bpt->type != bp_catch_exec)
- {
- ALL_BREAKPOINTS (b)
- if (b->loc->address == bpt->loc->address
- && b->loc->section == bpt->loc->section
- && !b->loc->duplicate
- && b->enable_state != bp_disabled
- && b->enable_state != bp_shlib_disabled
- && !b->pending
- && b->enable_state != bp_call_disabled)
- {
- int val;
-
- /* We should never reach this point if there is a permanent
- breakpoint at the same address as the one being deleted.
- If there is a permanent breakpoint somewhere, it should
- always be the only one inserted. */
- if (b->enable_state == bp_permanent)
- internal_error (__FILE__, __LINE__,
- _("another breakpoint was inserted on top of "
- "a permanent breakpoint"));
-
- memset (&b->loc->target_info, 0, sizeof (b->loc->target_info));
- b->loc->target_info.placed_address = b->loc->address;
- if (b->type == bp_hardware_breakpoint)
- val = target_insert_hw_breakpoint (&b->loc->target_info);
- else
- val = target_insert_breakpoint (&b->loc->target_info);
-
- /* If there was an error in the insert, print a message, then stop execution. */
- if (val != 0)
- {
- struct ui_file *tmp_error_stream = mem_fileopen ();
- make_cleanup_ui_file_delete (tmp_error_stream);
-
-
- if (b->type == bp_hardware_breakpoint)
+ for (loc = bpt->loc; loc; loc = loc->next)
+ {
+ /* If this breakpoint location was inserted, and there is
+ another breakpoint at the same address, we need to
+ insert the other breakpoint. */
+ if (loc->inserted)
+ {
+ struct bp_location *loc2;
+ ALL_BP_LOCATIONS (loc2)
+ if (loc2->address == loc->address
+ && loc2->section == loc->section
+ && !loc->duplicate
+ && loc2->owner->enable_state != bp_disabled
+ && loc2->enabled
+ && !loc2->shlib_disabled
+ && loc2->owner->enable_state != bp_call_disabled)
{
- fprintf_unfiltered (tmp_error_stream,
- "Cannot insert hardware breakpoint %d.\n"
- "You may have requested too many hardware breakpoints.\n",
- b->number);
- }
- else
- {
- fprintf_unfiltered (tmp_error_stream, "Cannot insert breakpoint %d.\n", b->number);
- fprintf_filtered (tmp_error_stream, "Error accessing memory address ");
- deprecated_print_address_numeric (b->loc->address, 1, tmp_error_stream);
- fprintf_filtered (tmp_error_stream, ": %s.\n",
- safe_strerror (val));
- }
-
- fprintf_unfiltered (tmp_error_stream,"The same program may be running in another process.");
- target_terminal_ours_for_output ();
- error_stream(tmp_error_stream);
- }
- else
- b->loc->inserted = 1;
- }
- }
+ int val;
+
+ /* We should never reach this point if there is a permanent
+ breakpoint at the same address as the one being deleted.
+ If there is a permanent breakpoint somewhere, it should
+ always be the only one inserted. */
+ if (loc2->owner->enable_state == bp_permanent)
+ internal_error (__FILE__, __LINE__,
+ _("another breakpoint was inserted on top of "
+ "a permanent breakpoint"));
+
+ memset (&loc2->target_info, 0, sizeof (loc2->target_info));
+ loc2->target_info.placed_address = loc2->address;
+ if (b->type == bp_hardware_breakpoint)
+ val = target_insert_hw_breakpoint (&loc2->target_info);
+ else
+ val = target_insert_breakpoint (&loc2->target_info);
+
+ /* If there was an error in the insert, print a message, then stop execution. */
+ if (val != 0)
+ {
+ struct ui_file *tmp_error_stream = mem_fileopen ();
+ make_cleanup_ui_file_delete (tmp_error_stream);
+
+
+ if (b->type == bp_hardware_breakpoint)
+ {
+ fprintf_unfiltered (tmp_error_stream,
+ "Cannot insert hardware breakpoint %d.\n"
+ "You may have requested too many hardware breakpoints.\n",
+ b->number);
+ }
+ else
+ {
+ fprintf_unfiltered (tmp_error_stream, "Cannot insert breakpoint %d.\n", b->number);
+ fprintf_filtered (tmp_error_stream, "Error accessing memory address ");
+ deprecated_print_address_numeric (loc2->address, 1, tmp_error_stream);
+ fprintf_filtered (tmp_error_stream, ": %s.\n",
+ safe_strerror (val));
+ }
+
+ fprintf_unfiltered (tmp_error_stream,"The same program may be running in another process.");
+ target_terminal_ours_for_output ();
+ error_stream(tmp_error_stream);
+ }
+ else
+ loc2->inserted = 1;
+ }
+ }
+ }
free_command_lines (&bpt->commands);
if (bpt->cond_string != NULL)
bp, we mark it as deleted before freeing its storage. */
bpt->type = bp_none;
- if (bpt->loc->cond)
- xfree (bpt->loc->cond);
- xfree (bpt->loc);
+ for (loc = bpt->loc; loc;)
+ {
+ struct bp_location *loc_next = loc->next;
+ xfree (loc);
+ loc = loc_next;
+ }
xfree (bpt);
}
map_breakpoint_numbers (arg, delete_breakpoint);
}
-static void
-unlink_locations_from_global_list (struct breakpoint *bpt)
- /* Remove locations of this breakpoint from the list of
- all breakpoint locations. */
+static int
+all_locations_are_pending (struct bp_location *loc)
{
- struct bp_location **tmp = &bp_location_chain;
- struct bp_location *here = bpt->loc;
-
- if (here == NULL)
- return;
-
- for (; *tmp && *tmp != here; tmp = &((*tmp)->next));
- gdb_assert (*tmp);
-
- *tmp = here->next;
+ for (; loc; loc = loc->next)
+ if (!loc->shlib_disabled)
+ return 0;
+ return 1;
}
-
static void
-update_breakpoint_location (struct breakpoint *b,
- struct symtabs_and_lines sals)
+update_breakpoint_locations (struct breakpoint *b,
+ struct symtabs_and_lines sals)
{
int i;
char *s;
- /* FIXME: memleak. */
- struct bp_location *existing = b->loc;
- struct bp_location *loc;
- struct symtab_and_line sal;
-
- if (b->enable_state == bp_shlib_disabled && sals.nelts == 0)
+ struct bp_location *existing_locations = b->loc;
+
+ /* If there's no new locations, and all existing locations
+ are pending, don't do anything. This optimizes
+ the common case where all locations are in the same
+ shared library, that was unloaded. We'd like to
+ retain the location, so that when the library
+ is loaded again, we don't loose the enabled/disabled
+ status of the individual locations. */
+ if (all_locations_are_pending (existing_locations) && sals.nelts == 0)
return;
unlink_locations_from_global_list (b);
b->loc = NULL;
- gdb_assert (sals.nelts == 0 || sals.nelts == 1);
- if (sals.nelts == 0)
- return;
- sal = sals.sals[0];
-
- loc = allocate_bp_location (b, b->type);
- loc->requested_address = sal.pc;
- loc->address = adjust_breakpoint_address (loc->requested_address,
- b->type);
- loc->section = sal.section;
- b->loc = loc;
-
- /* Reparse conditions, they might contain references to the
- old symtab. */
- if (b->cond_string != NULL)
+ for (i = 0; i < sals.nelts; ++i)
{
- struct gdb_exception e;
-
- s = b->cond_string;
- TRY_CATCH (e, RETURN_MASK_ERROR)
- {
- loc->cond = parse_exp_1 (&s, block_for_pc (sal.pc),
- 0);
- }
- if (e.reason < 0)
- {
- warning (_("failed to reevaluate condition for breakpoint %d: %s"),
- b->number, e.message);
- b->enable_state = bp_disabled;
- }
- }
+ struct bp_location *new_loc =
+ add_location_to_breakpoint (b, b->type, &(sals.sals[i]));
- if (b->source_file != NULL)
- xfree (b->source_file);
- if (sal.symtab == NULL)
- b->source_file = NULL;
- else
- b->source_file =
- savestring (sal.symtab->filename,
- strlen (sal.symtab->filename));
+ /* Reparse conditions, they might contain references to the
+ old symtab. */
+ if (b->cond_string != NULL)
+ {
+ struct gdb_exception e;
- if (b->line_number == 0)
- b->line_number = sal.line;
+ s = b->cond_string;
+ TRY_CATCH (e, RETURN_MASK_ERROR)
+ {
+ new_loc->cond = parse_exp_1 (&s, block_for_pc (sals.sals[i].pc),
+ 0);
+ }
+ if (e.reason < 0)
+ {
+ warning (_("failed to reevaluate condition for breakpoint %d: %s"),
+ b->number, e.message);
+ new_loc->enabled = 0;
+ }
+ }
- if (b->enable_state == bp_shlib_disabled)
- b->enable_state = bp_enabled;
+ if (b->source_file != NULL)
+ xfree (b->source_file);
+ if (sals.sals[i].symtab == NULL)
+ b->source_file = NULL;
+ else
+ b->source_file =
+ savestring (sals.sals[i].symtab->filename,
+ strlen (sals.sals[i].symtab->filename));
- b->pending = 0;
+ if (b->line_number == 0)
+ b->line_number = sals.sals[i].line;
+ }
- check_duplicates (b);
+ /* If possible, carry over 'disable' status from existing breakpoints. */
+ {
+ struct bp_location *e = existing_locations;
+ for (; e; e = e->next)
+ {
+ if (!e->enabled && e->function_name)
+ {
+ struct bp_location *l = b->loc;
+ for (; l; l = l->next)
+ if (l->function_name
+ && strcmp (e->function_name, l->function_name) == 0)
+ {
+ l->enabled = 0;
+ break;
+ }
+ }
+ }
+ }
- if (existing)
- free_bp_location (existing);
+ if (existing_locations)
+ free_bp_location (existing_locations);
}
don't need extra messages. If breakpoint is in bp_shlib_disabled
state, then user already saw the message about that breakpoint
being disabled, and don't want to see more errors. */
- if (not_found && (b->pending || b->enable_state == bp_shlib_disabled
- || b->enable_state == bp_disabled))
+ if (not_found
+ && (b->condition_not_parsed
+ || (b->loc && b->loc->shlib_disabled)
+ || b->enable_state == bp_disabled))
not_found_and_ok = 1;
if (!not_found_and_ok)
gdb_assert (sals.nelts == 1);
resolve_sal_pc (&sals.sals[0]);
- if (b->pending && s && s[0])
+ if (b->condition_not_parsed && s && s[0])
{
char *cond_string = 0;
int thread = -1;
if (cond_string)
b->cond_string = cond_string;
b->thread = thread;
+ b->condition_not_parsed = 0;
}
- update_breakpoint_location (b, sals);
+ update_breakpoint_locations (b, sals);
+
+ /* Now that this is re-enabled, check_duplicates
+ can be used. */
+ check_duplicates (b);
xfree (sals.sals);
break;
}
}
+static struct bp_location *
+find_location_by_number (char *number)
+{
+ char *dot = strchr (number, '.');
+ char *p1;
+ int bp_num;
+ int loc_num;
+ struct breakpoint *b;
+ struct bp_location *loc;
+
+ *dot = '\0';
+
+ p1 = number;
+ bp_num = get_number_or_range (&p1);
+ if (bp_num == 0)
+ error (_("Bad breakpoint number '%s'"), number);
+
+ ALL_BREAKPOINTS (b)
+ if (b->number == bp_num)
+ {
+ break;
+ }
+
+ if (!b || b->number != bp_num)
+ error (_("Bad breakpoint number '%s'"), number);
+
+ p1 = dot+1;
+ loc_num = get_number_or_range (&p1);
+ if (loc_num == 0)
+ error (_("Bad breakpoint location number '%s'"), number);
+
+ --loc_num;
+ loc = b->loc;
+ for (;loc_num && loc; --loc_num, loc = loc->next)
+ ;
+ if (!loc)
+ error (_("Bad breakpoint location number '%s'"), dot+1);
+
+ return loc;
+}
+
+
/* Set ignore-count of breakpoint number BPTNUM to COUNT.
If from_tty is nonzero, it prints a message to that effect,
which ends with a period (no newline). */
default:
continue;
}
+ else if (strchr (args, '.'))
+ {
+ struct bp_location *loc = find_location_by_number (args);
+ if (loc)
+ loc->enabled = 0;
+ check_duplicates (loc->owner);
+ }
else
map_breakpoint_numbers (args, disable_breakpoint);
}
default:
continue;
}
+ else if (strchr (args, '.'))
+ {
+ struct bp_location *loc = find_location_by_number (args);
+ if (loc)
+ loc->enabled = 1;
+ check_duplicates (loc->owner);
+ }
else
map_breakpoint_numbers (args, enable_breakpoint);
}
projects / external / binutils.git / commitdiff