rtc: add BSM parameter

BSM or Backup Switch Mode is a common feature on RTCs, allowing to select
how the RTC will decide when to switch from its primary power supply to the
backup power supply. It is necessary to be able to set it from userspace as
there are uses cases where it has to be done dynamically.

Supported values are:
  RTC_BSM_DISABLED: disabled
  RTC_BSM_DIRECT: switching will happen as soon as Vbackup > Vdd
  RTC_BSM_LEVEL: switching will happen around a threshold, usually with an
  hysteresis
  RTC_BSM_STANDBY: switching will not happen until Vdd > Vbackup, this is
  useful to ensure the RTC doesn't draw any power until the device is first
  powered on.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20211018151933.76865-6-alexandre.belloni@bootlin.com

diff --git a/drivers/rtc/dev.c b/drivers/rtc/dev.c
index abee1fc..e104972 100644 (file)
--- a/drivers/rtc/dev.c
+++ b/drivers/rtc/dev.c
@@ -409,7 +409,10 @@ static long rtc_dev_ioctl(struct file *file,
                        break;
 
                default:
-                       err = -EINVAL;
+                       if (rtc->ops->param_get)
+                               err = rtc->ops->param_get(rtc->dev.parent, &param);
+                       else
+                               err = -EINVAL;
                }
 
                if (!err)
@@ -436,7 +439,10 @@ static long rtc_dev_ioctl(struct file *file,
                        return rtc_set_offset(rtc, param.svalue);
 
                default:
-                       err = -EINVAL;
+                       if (rtc->ops->param_set)
+                               err = rtc->ops->param_set(rtc->dev.parent, &param);
+                       else
+                               err = -EINVAL;
                }
 
                break;

diff --git a/include/linux/rtc.h b/include/linux/rtc.h
index 354e084..47fd1c2 100644 (file)
--- a/include/linux/rtc.h
+++ b/include/linux/rtc.h
@@ -66,6 +66,8 @@ struct rtc_class_ops {
        int (*alarm_irq_enable)(struct device *, unsigned int enabled);
        int (*read_offset)(struct device *, long *offset);
        int (*set_offset)(struct device *, long offset);
+       int (*param_get)(struct device *, struct rtc_param *param);
+       int (*param_set)(struct device *, struct rtc_param *param);
 };
 
 struct rtc_device;

diff --git a/include/uapi/linux/rtc.h b/include/uapi/linux/rtc.h
index 5debe82..03e5b77 100644 (file)
--- a/include/uapi/linux/rtc.h
+++ b/include/uapi/linux/rtc.h
@@ -132,11 +132,18 @@ struct rtc_param {
 #define RTC_FEATURE_ALARM_RES_2S       3
 #define RTC_FEATURE_UPDATE_INTERRUPT   4
 #define RTC_FEATURE_CORRECTION         5
-#define RTC_FEATURE_CNT                        6
+#define RTC_FEATURE_BACKUP_SWITCH_MODE 6
+#define RTC_FEATURE_CNT                        7
 
 /* parameter list */
 #define RTC_PARAM_FEATURES             0
 #define RTC_PARAM_CORRECTION           1
+#define RTC_PARAM_BACKUP_SWITCH_MODE   2
+
+#define RTC_BSM_DISABLED       0
+#define RTC_BSM_DIRECT         1
+#define RTC_BSM_LEVEL          2
+#define RTC_BSM_STANDBY                3
 
 #define RTC_MAX_FREQ   8192