keymile boards: add CONFIG_PIGGY_MAC_ADRESS_OFFSET

Normaly the PIGGY_MAC_ADRESS can be read directly from the
IVM on keymile boards. On mgcoge3 it differs. Because there
are two piggy boards deployed the second MAC adress must be
calculated with the IVM mac adress and an offset. This patch
allows to set such a offset in the board config.

Signed-off-by: Holger Brunck <holger.brunck@keymile.com>
cc: Valentin Longchamp <valentin.longchamp@keymile.com>
cc: Heiko Schocher <hs@denx.de>

diff --git a/board/keymile/common/common.c b/board/keymile/common/common.c
index 6600e08..8392a64 100644 (file)
--- a/board/keymile/common/common.c
+++ b/board/keymile/common/common.c
@@ -228,8 +228,21 @@ static int ivm_analyze_block2(unsigned char *buf, int len)
        /* IVM_MacAddress */
        sprintf((char *)valbuf, "%pM", buf);
        ivm_set_value("IVM_MacAddress", (char *)valbuf);
+       /* if an offset is defined, add it */
+#if defined(CONFIG_PIGGY_MAC_ADRESS_OFFSET)
+       if (CONFIG_PIGGY_MAC_ADRESS_OFFSET > 0) {
+               unsigned long val = (buf[4] << 16) + (buf[5] << 8) + buf[6];
+
+               val += CONFIG_PIGGY_MAC_ADRESS_OFFSET;
+               buf[4] = (val >> 16) & 0xff;
+               buf[5] = (val >> 8) & 0xff;
+               buf[6] = val & 0xff;
+               sprintf((char *)valbuf, "%pM", buf);
+       }
+#endif
        if (getenv("ethaddr") == NULL)
                setenv((char *)"ethaddr", (char *)valbuf);
+
        /* IVM_MacCount */
        count = (buf[10] << 24) +
                   (buf[11] << 16) +

diff --git a/board/keymile/common/common.h b/board/keymile/common/common.h
index 8497ab6..e32de8d 100644 (file)
--- a/board/keymile/common/common.h
+++ b/board/keymile/common/common.h
@@ -39,6 +39,10 @@ struct km_bec_fpga {
        unsigned char   pgy_eth;
 };
 
+#if !defined(CONFIG_PIGGY_MAC_ADRESS_OFFSET)
+#define CONFIG_PIGGY_MAC_ADRESS_OFFSET 0
+#endif
+
 int ethernet_present(void);
 int ivm_read_eeprom(void);