While the DT parser recognizes "ok" as a valid value for the
"status" property, it is actually mentioned nowhere. Use the
proper value "okay" instead, as done in the majority of files
already.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Link: https://lore.kernel.org/r/20200830190820.20583-1-freifunk@adrianschmutzler.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
pinctrl-0 = <&rgmii_pins>;
tx_delay = <0x30>;
rx_delay = <0x10>;
- status = "ok";
+ status = "okay";
};
&gpu {
snps,reset-gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_LOW>;
tx_delay = <0x30>;
rx_delay = <0x10>;
- status = "ok";
+ status = "okay";
};
&i2c0 {
snps,reset-gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_LOW>;
tx_delay = <0x30>;
rx_delay = <0x10>;
- status = "ok";
+ status = "okay";
};
&gpu {
snps,reset-gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_LOW>;
tx_delay = <0x30>;
rx_delay = <0x10>;
- status = "ok";
+ status = "okay";
};
&hdmi {
pinctrl-0 = <&rgmii_pins>;
tx_delay = <0x30>;
rx_delay = <0x10>;
- status = "ok";
+ status = "okay";
};
&hdmi {
pinctrl-0 = <&rgmii_pins>;
tx_delay = <0x30>;
rx_delay = <0x10>;
- status = "ok";
+ status = "okay";
};
&hdmi {
};
&gmac {
- status = "ok";
+ status = "okay";
};
&hdmi {
snps,reset-delays-us = <0 10000 1000000>;
tx_delay = <0x30>;
rx_delay = <0x10>;
- status = "ok";
+ status = "okay";
};
&gpu {