ath9k_hw: Remove HW revision checks

They are not needed since MCI will be enabled only for
AR9462 v2.0

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

diff --git a/drivers/net/wireless/ath/ath9k/ar9003_mci.c b/drivers/net/wireless/ath/ath9k/ar9003_mci.c
index 8d3659c..591ca35 100644 (file)
--- a/drivers/net/wireless/ath/ath9k/ar9003_mci.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_mci.c
@@ -22,9 +22,6 @@
 
 static void ar9003_mci_reset_req_wakeup(struct ath_hw *ah)
 {
-       if (!AR_SREV_9462_20(ah))
-               return;
-
        REG_RMW_FIELD(ah, AR_MCI_COMMAND2,
                      AR_MCI_COMMAND2_RESET_REQ_WAKEUP, 1);
        udelay(1);
@@ -496,14 +493,9 @@ static void ar9003_mci_observation_set_up(struct ath_hw *ah)
 
        REG_SET_BIT(ah, AR_GPIO_INPUT_EN_VAL, AR_GPIO_JTAG_DISABLE);
 
-       if (AR_SREV_9462_20_OR_LATER(ah)) {
-               REG_RMW_FIELD(ah, AR_PHY_GLB_CONTROL,
-                             AR_GLB_DS_JTAG_DISABLE, 1);
-               REG_RMW_FIELD(ah, AR_PHY_GLB_CONTROL,
-                             AR_GLB_WLAN_UART_INTF_EN, 0);
-               REG_SET_BIT(ah, AR_GLB_GPIO_CONTROL,
-                           ATH_MCI_CONFIG_MCI_OBS_GPIO);
-       }
+       REG_RMW_FIELD(ah, AR_PHY_GLB_CONTROL, AR_GLB_DS_JTAG_DISABLE, 1);
+       REG_RMW_FIELD(ah, AR_PHY_GLB_CONTROL, AR_GLB_WLAN_UART_INTF_EN, 0);
+       REG_SET_BIT(ah, AR_GLB_GPIO_CONTROL, ATH_MCI_CONFIG_MCI_OBS_GPIO);
 
        REG_RMW_FIELD(ah, AR_BTCOEX_CTRL2, AR_BTCOEX_CTRL2_GPIO_OBS_SEL, 0);
        REG_RMW_FIELD(ah, AR_BTCOEX_CTRL2, AR_BTCOEX_CTRL2_MAC_BB_OBS_SEL, 1);
@@ -1053,9 +1045,7 @@ static void ar9003_mci_send_2g5g_status(struct ath_hw *ah, bool wait_done)
        struct ath9k_hw_mci *mci = &ah->btcoex_hw.mci;
        u32 new_flags, to_set, to_clear;
 
-       if (AR_SREV_9462_20(ah) &&
-           mci->update_2g5g &&
-           (mci->bt_state != MCI_BT_SLEEP)) {
+       if (mci->update_2g5g && (mci->bt_state != MCI_BT_SLEEP)) {
 
                if (mci->is_2g) {
                        new_flags = MCI_2G_FLAGS;
@@ -1193,14 +1183,13 @@ void ar9003_mci_2g5g_switch(struct ath_hw *ah, bool wait_done)
                        REG_CLR_BIT(ah, AR_MCI_TX_CTRL,
                                    AR_MCI_TX_CTRL_DISABLE_LNA_UPDATE);
 
-                       if (AR_SREV_9462_20(ah)) {
                                REG_CLR_BIT(ah, AR_PHY_GLB_CONTROL,
                                            AR_BTCOEX_CTRL_BT_OWN_SPDT_CTRL);
+
                                if (!(mci->config &
                                      ATH_MCI_CONFIG_DISABLE_OSLA)) {
                                        REG_SET_BIT(ah, AR_BTCOEX_CTRL,
                                        AR_BTCOEX_CTRL_ONE_STEP_LOOK_AHEAD_EN);
-                               }
                        }
                } else {
                        ath_dbg(common, MCI, "MCI Send LNA take\n");
@@ -1210,12 +1199,10 @@ void ar9003_mci_2g5g_switch(struct ath_hw *ah, bool wait_done)
                        REG_SET_BIT(ah, AR_MCI_TX_CTRL,
                                    AR_MCI_TX_CTRL_DISABLE_LNA_UPDATE);
 
-                       if (AR_SREV_9462_20(ah)) {
-                               REG_SET_BIT(ah, AR_PHY_GLB_CONTROL,
-                                           AR_BTCOEX_CTRL_BT_OWN_SPDT_CTRL);
-                               REG_CLR_BIT(ah, AR_BTCOEX_CTRL,
-                                       AR_BTCOEX_CTRL_ONE_STEP_LOOK_AHEAD_EN);
-                       }
+                       REG_SET_BIT(ah, AR_PHY_GLB_CONTROL,
+                                   AR_BTCOEX_CTRL_BT_OWN_SPDT_CTRL);
+                       REG_CLR_BIT(ah, AR_BTCOEX_CTRL,
+                                   AR_BTCOEX_CTRL_ONE_STEP_LOOK_AHEAD_EN);
 
                        ar9003_mci_send_2g5g_status(ah, true);
                }
@@ -1532,8 +1519,7 @@ u32 ar9003_mci_state(struct ath_hw *ah, u32 state_type, u32 *p_data)
                ar9003_mci_reset_req_wakeup(ah);
                mci->update_2g5g = true;
 
-               if ((AR_SREV_9462_20_OR_LATER(ah)) &&
-                   (mci->config & ATH_MCI_CONFIG_MCI_OBS_MASK)) {
+               if (mci->config & ATH_MCI_CONFIG_MCI_OBS_MASK) {
                        /* Check if we still have control of the GPIOs */
                        if ((REG_READ(ah, AR_GLB_GPIO_CONTROL) &
                                      ATH_MCI_CONFIG_MCI_OBS_GPIO) !=