arm64: dts: qcom: sm8450-hdk: Add LT9611uxc HDMI bridge

Add the LT9611uxc DSI-HDMI bridge and supplies

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221207012803.114959-5-dmitry.baryshkov@linaro.org

diff --git a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts
index a85ea34..3f871c0 100644 (file)
--- a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts
+++ b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts
@@ -21,6 +21,28 @@
                stdout-path = "serial0:115200n8";
        };
 
+       lt9611_1v2: lt9611-vdd12-regulator {
+               compatible = "regulator-fixed";
+               regulator-name = "LT9611_1V2";
+
+               vin-supply = <&vph_pwr>;
+               regulator-min-microvolt = <1200000>;
+               regulator-max-microvolt = <1200000>;
+               gpio = <&tlmm 9 GPIO_ACTIVE_HIGH>;
+               enable-active-high;
+       };
+
+       lt9611_3v3: lt9611-3v3-regulator {
+               compatible = "regulator-fixed";
+               regulator-name = "LT9611_3V3";
+
+               vin-supply = <&vreg_bob>;
+               gpio = <&tlmm 109 GPIO_ACTIVE_HIGH>;
+               regulator-min-microvolt = <3300000>;
+               regulator-max-microvolt = <3300000>;
+               enable-active-high;
+       };
+
        vph_pwr: vph-pwr-regulator {
                compatible = "regulator-fixed";
                regulator-name = "vph_pwr";
@@ -354,6 +376,26 @@
        status = "okay";
 };
 
+&i2c9 {
+       clock-frequency = <400000>;
+       status = "okay";
+
+       lt9611_codec: hdmi-bridge@2b {
+               compatible = "lontium,lt9611uxc";
+               reg = <0x2b>;
+
+               interrupts-extended = <&tlmm 44 IRQ_TYPE_EDGE_FALLING>;
+
+               reset-gpios = <&tlmm 107 GPIO_ACTIVE_HIGH>;
+
+               vdd-supply = <&lt9611_1v2>;
+               vcc-supply = <&lt9611_3v3>;
+
+               pinctrl-names = "default";
+               pinctrl-0 = <&lt9611_irq_pin &lt9611_rst_pin>;
+       };
+};
+
 &mdss {
        status = "okay";
 };
@@ -417,6 +459,10 @@
        status = "okay";
 };
 
+&qupv3_id_1 {
+       status = "okay";
+};
+
 &sdhc_2 {
        cd-gpios = <&tlmm 92 GPIO_ACTIVE_HIGH>;
        pinctrl-names = "default", "sleep";
@@ -586,6 +632,18 @@
 &tlmm {
        gpio-reserved-ranges = <28 4>, <36 4>;
 
+       lt9611_irq_pin: lt9611-irq-state {
+               pins = "gpio44";
+               function = "gpio";
+               bias-disable;
+       };
+
+       lt9611_rst_pin: lt9611-rst-state {
+               pins = "gpio107";
+               function = "gpio";
+               output-high;
+       };
+
        sdc2_card_det_n: sd-card-det-n-state {
                pins = "gpio92";
                function = "gpio";