#define MII_MARVELL_PHY_PAGE 22
#define MII_PHY_LED_CTRL 16
+#define MII_PHY_LED_POL_CTRL 17
#define MII_88E1318S_PHY_LED_TCR 18
#define MII_88E1318S_PHY_WOL_CTRL 16
#define MII_M1011_IEVENT 19
#define LED2_FORCE_ON (0x8 << 8)
#define LEDMASK GENMASK(11,8)
+#define MII_88E1318S_PHY_LED_POL_LED2 BIT(4)
+
struct power_off_cfg {
char *mdio_node_name;
void (*phy_set_reg)(bool restart);
dev_err(&phydev->mdio.dev, "Write register failed, %d\n", rc);
}
+static void readynas_mvphy_set_reg(bool restart)
+{
+ int rc = 0, saved_page;
+ u16 data = 0;
+
+ if (restart)
+ data = MII_88E1318S_PHY_LED_POL_LED2;
+
+ saved_page = phy_select_page(phydev, MII_MARVELL_LED_PAGE);
+ if (saved_page < 0)
+ goto err;
+
+ /* Set the LED[2].0 Polarity bit to the required state */
+ __phy_modify(phydev, MII_PHY_LED_POL_CTRL,
+ MII_88E1318S_PHY_LED_POL_LED2, data);
+
+ if (!data) {
+ /* If WOL was enabled and a magic packet was received before powering
+ * off, we won't be able to wake up by sending another magic packet.
+ * Clear WOL status.
+ */
+ __phy_write(phydev, MII_MARVELL_PHY_PAGE, MII_MARVELL_WOL_PAGE);
+ __phy_set_bits(phydev, MII_88E1318S_PHY_WOL_CTRL,
+ MII_88E1318S_PHY_WOL_CTRL_CLEAR_WOL_STATUS);
+ }
+err:
+ rc = phy_restore_page(phydev, saved_page, rc);
+ if (rc < 0)
+ dev_err(&phydev->mdio.dev, "Write register failed, %d\n", rc);
+}
+
static const struct power_off_cfg linkstation_power_off_cfg = {
.mdio_node_name = "mdio",
.phy_set_reg = linkstation_mvphy_reg_intn,
};
+static const struct power_off_cfg readynas_power_off_cfg = {
+ .mdio_node_name = "mdio-bus",
+ .phy_set_reg = readynas_mvphy_set_reg,
+};
+
static int linkstation_reboot_notifier(struct notifier_block *nb,
unsigned long action, void *unused)
{
{ .compatible = "buffalo,ls421de",
.data = &linkstation_power_off_cfg,
},
+ { .compatible = "netgear,readynas-duo-v2",
+ .data = &readynas_power_off_cfg,
+ },
{ },
};