Blackfin arch: Retire old spi_mmc driver

Turn to use the mmc_spi driver in mainline kernel.

Signed-off-by: Yi Li <yi.li@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

diff --git a/arch/blackfin/configs/BF548-EZKIT_defconfig b/arch/blackfin/configs/BF548-EZKIT_defconfig
index 3e75ac6..92fa18d 100644 (file)
--- a/arch/blackfin/configs/BF548-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF548-EZKIT_defconfig
@@ -1285,7 +1285,6 @@ CONFIG_MMC_BLOCK_BOUNCE=y
 CONFIG_SDH_BFIN=m
 # CONFIG_SDH_BFIN_MISSING_CMD_PULLUP_WORKAROUND is not set
 # CONFIG_MMC_SPI is not set
-# CONFIG_SPI_MMC is not set
 # CONFIG_NEW_LEDS is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y

diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c
index 07757f7..dc0384d 100644 (file)
--- a/arch/blackfin/mach-bf527/boards/ezkit.c
+++ b/arch/blackfin/mach-bf527/boards/ezkit.c
@@ -504,13 +504,6 @@ static struct bfin5xx_spi_chip ad9960_spi_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
-       .enable_dma = 1,
-       .bits_per_word = 8,
-};
-#endif
-
 #if defined(CONFIG_PBX)
 static struct bfin5xx_spi_chip spi_si3xxx_chip_info = {
        .ctl_reg        = 0x4, /* send zero */
@@ -602,26 +595,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
                .controller_data = &ad9960_spi_chip_info,
        },
 #endif
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-       {
-               .modalias = "spi_mmc_dummy",
-               .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
-               .bus_num = 0,
-               .chip_select = 0,
-               .platform_data = NULL,
-               .controller_data = &spi_mmc_chip_info,
-               .mode = SPI_MODE_3,
-       },
-       {
-               .modalias = "spi_mmc",
-               .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
-               .bus_num = 0,
-               .chip_select = CONFIG_SPI_MMC_CS_CHAN,
-               .platform_data = NULL,
-               .controller_data = &spi_mmc_chip_info,
-               .mode = SPI_MODE_3,
-       },
-#endif
 #if defined(CONFIG_PBX)
        {
                .modalias = "fxs-spi",

diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c
index 1b08323..b0d8776 100644 (file)
--- a/arch/blackfin/mach-bf533/boards/stamp.c
+++ b/arch/blackfin/mach-bf533/boards/stamp.c
@@ -216,13 +216,6 @@ static struct bfin5xx_spi_chip spi_si3xxx_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
-       .enable_dma = 1,
-       .bits_per_word = 8,
-};
-#endif
-
 #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
 static struct bfin5xx_spi_chip spidev_chip_info = {
        .enable_dma = 0,
@@ -265,27 +258,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
        },
 #endif
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-       {
-               .modalias = "spi_mmc_dummy",
-               .max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
-               .bus_num = 0,
-               .chip_select = 0,
-               .platform_data = NULL,
-               .controller_data = &spi_mmc_chip_info,
-               .mode = SPI_MODE_3,
-       },
-       {
-               .modalias = "spi_mmc",
-               .max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
-               .bus_num = 0,
-               .chip_select = CONFIG_SPI_MMC_CS_CHAN,
-               .platform_data = NULL,
-               .controller_data = &spi_mmc_chip_info,
-               .mode = SPI_MODE_3,
-       },
-#endif
-
 #if defined(CONFIG_PBX)
        {
                .modalias = "fxs-spi",

diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c
index a5e8e5b..e6e722d 100644 (file)
--- a/arch/blackfin/mach-bf537/boards/stamp.c
+++ b/arch/blackfin/mach-bf537/boards/stamp.c
@@ -527,13 +527,6 @@ static struct bfin5xx_spi_chip ad9960_spi_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
-       .enable_dma = 0,
-       .bits_per_word = 8,
-};
-#endif
-
 #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
 #define MMC_SPI_CARD_DETECT_INT IRQ_PF5
 
@@ -720,26 +713,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
                .controller_data = &ad9960_spi_chip_info,
        },
 #endif
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-       {
-               .modalias = "spi_mmc_dummy",
-               .max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
-               .bus_num = 0,
-               .chip_select = 0,
-               .platform_data = NULL,
-               .controller_data = &spi_mmc_chip_info,
-               .mode = SPI_MODE_3,
-       },
-       {
-               .modalias = "spi_mmc",
-               .max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
-               .bus_num = 0,
-               .chip_select = CONFIG_SPI_MMC_CS_CHAN,
-               .platform_data = NULL,
-               .controller_data = &spi_mmc_chip_info,
-               .mode = SPI_MODE_3,
-       },
-#endif
 #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
        {
                .modalias = "mmc_spi",