net: remove unused CONFIG_DRIVER_AT91EMAC_*
authorEugen Hristev <eugen.hristev@microchip.com>
Wed, 25 Aug 2021 10:28:28 +0000 (13:28 +0300)
committerEugen Hristev <eugen.hristev@microchip.com>
Tue, 21 Sep 2021 07:08:24 +0000 (10:08 +0300)
AT91EMAC driver is unused, thus removing.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
README
drivers/net/Makefile
drivers/net/at91_emac.c [deleted file]
include/netdev.h
scripts/config_whitelist.txt

diff --git a/README b/README
index bbfc4bc..1ef8010 100644 (file)
--- a/README
+++ b/README
@@ -856,17 +856,6 @@ The following options need to be configured:
                Support for National dp8382[01] gigabit chips.
 
 - NETWORK Support (other):
-
-               CONFIG_DRIVER_AT91EMAC
-               Support for AT91RM9200 EMAC.
-
-                       CONFIG_RMII
-                       Define this to use reduced MII inteface
-
-                       CONFIG_DRIVER_AT91EMAC_QUIET
-                       If this defined, the driver is quiet.
-                       The driver doen't show link status messages.
-
                CONFIG_CALXEDA_XGMAC
                Support for the Calxeda XGMAC device
 
index 96c061a..e4078d1 100644 (file)
@@ -11,7 +11,6 @@ obj-$(CONFIG_ARMADA100_FEC) += armada100_fec.o
 obj-$(CONFIG_BCM6348_ETH) += bcm6348-eth.o
 obj-$(CONFIG_BCM6368_ETH) += bcm6368-eth.o
 obj-$(CONFIG_BCMGENET) += bcmgenet.o
-obj-$(CONFIG_DRIVER_AT91EMAC) += at91_emac.o
 obj-$(CONFIG_DRIVER_AX88180) += ax88180.o
 obj-$(CONFIG_BCM_SF2_ETH) += bcm-sf2-eth.o
 obj-$(CONFIG_BCM_SF2_ETH_GMAC) += bcm-sf2-eth-gmac.o
diff --git a/drivers/net/at91_emac.c b/drivers/net/at91_emac.c
deleted file mode 100644 (file)
index e40b94a..0000000
+++ /dev/null
@@ -1,519 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2009 BuS Elektronik GmbH & Co. KG
- * Jens Scharsig (esw@bus-elektronik.de)
- *
- * (C) Copyright 2003
- * Author : Hamid Ikdoumi (Atmel)
- */
-
-#include <common.h>
-#include <log.h>
-#include <asm/io.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/at91_emac.h>
-#include <asm/arch/clk.h>
-#include <asm/arch/at91_pio.h>
-#include <net.h>
-#include <netdev.h>
-#include <malloc.h>
-#include <miiphy.h>
-#include <linux/delay.h>
-#include <linux/mii.h>
-
-#undef MII_DEBUG
-#undef ET_DEBUG
-
-#if (CONFIG_SYS_RX_ETH_BUFFER > 1024)
-#error AT91 EMAC supports max 1024 RX buffers. \
-       Please decrease the CONFIG_SYS_RX_ETH_BUFFER value
-#endif
-
-#ifndef CONFIG_DRIVER_AT91EMAC_PHYADDR
-#define CONFIG_DRIVER_AT91EMAC_PHYADDR 0
-#endif
-
-/* MDIO clock must not exceed 2.5 MHz, so enable MCK divider */
-#if (AT91C_MASTER_CLOCK > 80000000)
-       #define HCLK_DIV        AT91_EMAC_CFG_MCLK_64
-#elif (AT91C_MASTER_CLOCK > 40000000)
-       #define HCLK_DIV        AT91_EMAC_CFG_MCLK_32
-#elif (AT91C_MASTER_CLOCK > 20000000)
-       #define HCLK_DIV        AT91_EMAC_CFG_MCLK_16
-#else
-       #define HCLK_DIV        AT91_EMAC_CFG_MCLK_8
-#endif
-
-#ifdef ET_DEBUG
-#define DEBUG_AT91EMAC 1
-#else
-#define DEBUG_AT91EMAC 0
-#endif
-
-#ifdef MII_DEBUG
-#define DEBUG_AT91PHY  1
-#else
-#define DEBUG_AT91PHY  0
-#endif
-
-#ifndef CONFIG_DRIVER_AT91EMAC_QUIET
-#define VERBOSEP       1
-#else
-#define VERBOSEP       0
-#endif
-
-#define RBF_ADDR      0xfffffffc
-#define RBF_OWNER     (1<<0)
-#define RBF_WRAP      (1<<1)
-#define RBF_BROADCAST (1<<31)
-#define RBF_MULTICAST (1<<30)
-#define RBF_UNICAST   (1<<29)
-#define RBF_EXTERNAL  (1<<28)
-#define RBF_UNKNOWN   (1<<27)
-#define RBF_SIZE      0x07ff
-#define RBF_LOCAL4    (1<<26)
-#define RBF_LOCAL3    (1<<25)
-#define RBF_LOCAL2    (1<<24)
-#define RBF_LOCAL1    (1<<23)
-
-#define RBF_FRAMEMAX CONFIG_SYS_RX_ETH_BUFFER
-#define RBF_FRAMELEN 0x600
-
-typedef struct {
-       unsigned long addr, size;
-} rbf_t;
-
-typedef struct {
-       rbf_t           rbfdt[RBF_FRAMEMAX];
-       unsigned long   rbindex;
-} emac_device;
-
-void at91emac_EnableMDIO(at91_emac_t *at91mac)
-{
-       /* Mac CTRL reg set for MDIO enable */
-       writel(readl(&at91mac->ctl) | AT91_EMAC_CTL_MPE, &at91mac->ctl);
-}
-
-void at91emac_DisableMDIO(at91_emac_t *at91mac)
-{
-       /* Mac CTRL reg set for MDIO disable */
-       writel(readl(&at91mac->ctl) & ~AT91_EMAC_CTL_MPE, &at91mac->ctl);
-}
-
-int  at91emac_read(at91_emac_t *at91mac, unsigned char addr,
-               unsigned char reg, unsigned short *value)
-{
-       unsigned long netstat;
-       at91emac_EnableMDIO(at91mac);
-
-       writel(AT91_EMAC_MAN_HIGH | AT91_EMAC_MAN_RW_R |
-               AT91_EMAC_MAN_REGA(reg) | AT91_EMAC_MAN_CODE_802_3 |
-               AT91_EMAC_MAN_PHYA(addr),
-               &at91mac->man);
-
-       do {
-               netstat = readl(&at91mac->sr);
-               debug_cond(DEBUG_AT91PHY, "poll SR %08lx\n", netstat);
-       } while (!(netstat & AT91_EMAC_SR_IDLE));
-
-       *value = readl(&at91mac->man) & AT91_EMAC_MAN_DATA_MASK;
-
-       at91emac_DisableMDIO(at91mac);
-
-       debug_cond(DEBUG_AT91PHY,
-               "AT91PHY read %p REG(%d)=%x\n", at91mac, reg, *value);
-
-       return 0;
-}
-
-int  at91emac_write(at91_emac_t *at91mac, unsigned char addr,
-               unsigned char reg, unsigned short value)
-{
-       unsigned long netstat;
-       debug_cond(DEBUG_AT91PHY,
-               "AT91PHY write %p REG(%d)=%p\n", at91mac, reg, &value);
-
-       at91emac_EnableMDIO(at91mac);
-
-       writel(AT91_EMAC_MAN_HIGH | AT91_EMAC_MAN_RW_W |
-               AT91_EMAC_MAN_REGA(reg) | AT91_EMAC_MAN_CODE_802_3 |
-               AT91_EMAC_MAN_PHYA(addr) | (value & AT91_EMAC_MAN_DATA_MASK),
-               &at91mac->man);
-
-       do {
-               netstat = readl(&at91mac->sr);
-               debug_cond(DEBUG_AT91PHY, "poll SR %08lx\n", netstat);
-       } while (!(netstat & AT91_EMAC_SR_IDLE));
-
-       at91emac_DisableMDIO(at91mac);
-
-       return 0;
-}
-
-#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
-
-at91_emac_t *get_emacbase_by_name(const char *devname)
-{
-       struct eth_device *netdev;
-
-       netdev = eth_get_dev_by_name(devname);
-       return (at91_emac_t *) netdev->iobase;
-}
-
-int at91emac_mii_read(struct mii_dev *bus, int addr, int devad, int reg)
-{
-       unsigned short value = 0;
-       at91_emac_t *emac;
-
-       emac = get_emacbase_by_name(bus->name);
-       at91emac_read(emac , addr, reg, &value);
-       return value;
-}
-
-
-int at91emac_mii_write(struct mii_dev *bus, int addr, int devad, int reg,
-                      u16 value)
-{
-       at91_emac_t *emac;
-
-       emac = get_emacbase_by_name(bus->name);
-       at91emac_write(emac, addr, reg, value);
-       return 0;
-}
-
-#endif
-
-static int at91emac_phy_reset(struct eth_device *netdev)
-{
-       int i;
-       u16 status, adv;
-       at91_emac_t *emac;
-
-       emac = (at91_emac_t *) netdev->iobase;
-
-       adv = ADVERTISE_CSMA | ADVERTISE_ALL;
-       at91emac_write(emac, CONFIG_DRIVER_AT91EMAC_PHYADDR,
-               MII_ADVERTISE, adv);
-       debug_cond(VERBOSEP, "%s: Starting autonegotiation...\n", netdev->name);
-       at91emac_write(emac, CONFIG_DRIVER_AT91EMAC_PHYADDR, MII_BMCR,
-               (BMCR_ANENABLE | BMCR_ANRESTART));
-
-       for (i = 0; i < 30000; i++) {
-               at91emac_read(emac, CONFIG_DRIVER_AT91EMAC_PHYADDR,
-                       MII_BMSR, &status);
-               if (status & BMSR_ANEGCOMPLETE)
-                       break;
-               udelay(100);
-       }
-
-       if (status & BMSR_ANEGCOMPLETE) {
-               debug_cond(VERBOSEP,
-                       "%s: Autonegotiation complete\n", netdev->name);
-       } else {
-               printf("%s: Autonegotiation timed out (status=0x%04x)\n",
-                      netdev->name, status);
-               return -1;
-       }
-       return 0;
-}
-
-static int at91emac_phy_init(struct eth_device *netdev)
-{
-       u16 phy_id, status, adv, lpa;
-       int media, speed, duplex;
-       int i;
-       at91_emac_t *emac;
-
-       emac = (at91_emac_t *) netdev->iobase;
-
-       /* Check if the PHY is up to snuff... */
-       at91emac_read(emac, CONFIG_DRIVER_AT91EMAC_PHYADDR,
-               MII_PHYSID1, &phy_id);
-       if (phy_id == 0xffff) {
-               printf("%s: No PHY present\n", netdev->name);
-               return -1;
-       }
-
-       at91emac_read(emac, CONFIG_DRIVER_AT91EMAC_PHYADDR,
-               MII_BMSR, &status);
-
-       if (!(status & BMSR_LSTATUS)) {
-               /* Try to re-negotiate if we don't have link already. */
-               if (at91emac_phy_reset(netdev))
-                       return -2;
-
-               for (i = 0; i < 100000 / 100; i++) {
-                       at91emac_read(emac, CONFIG_DRIVER_AT91EMAC_PHYADDR,
-                               MII_BMSR, &status);
-                       if (status & BMSR_LSTATUS)
-                               break;
-                       udelay(100);
-               }
-       }
-       if (!(status & BMSR_LSTATUS)) {
-               debug_cond(VERBOSEP, "%s: link down\n", netdev->name);
-               return -3;
-       } else {
-               at91emac_read(emac, CONFIG_DRIVER_AT91EMAC_PHYADDR,
-                       MII_ADVERTISE, &adv);
-               at91emac_read(emac, CONFIG_DRIVER_AT91EMAC_PHYADDR,
-                       MII_LPA, &lpa);
-               media = mii_nway_result(lpa & adv);
-               speed = (media & (ADVERTISE_100FULL | ADVERTISE_100HALF)
-                        ? 1 : 0);
-               duplex = (media & ADVERTISE_FULL) ? 1 : 0;
-               debug_cond(VERBOSEP, "%s: link up, %sMbps %s-duplex\n",
-                      netdev->name,
-                      speed ? "100" : "10",
-                      duplex ? "full" : "half");
-       }
-       return 0;
-}
-
-int at91emac_UpdateLinkSpeed(at91_emac_t *emac)
-{
-       unsigned short stat1;
-
-       at91emac_read(emac, CONFIG_DRIVER_AT91EMAC_PHYADDR, MII_BMSR, &stat1);
-
-       if (!(stat1 & BMSR_LSTATUS))    /* link status up? */
-               return -1;
-
-       if (stat1 & BMSR_100FULL) {
-               /*set Emac for 100BaseTX and Full Duplex  */
-               writel(readl(&emac->cfg) |
-                       AT91_EMAC_CFG_SPD | AT91_EMAC_CFG_FD,
-                       &emac->cfg);
-               return 0;
-       }
-
-       if (stat1 & BMSR_10FULL) {
-               /*set MII for 10BaseT and Full Duplex  */
-               writel((readl(&emac->cfg) &
-                       ~(AT91_EMAC_CFG_SPD | AT91_EMAC_CFG_FD)
-                       ) | AT91_EMAC_CFG_FD,
-                       &emac->cfg);
-               return 0;
-       }
-
-       if (stat1 & BMSR_100HALF) {
-               /*set MII for 100BaseTX and Half Duplex  */
-               writel((readl(&emac->cfg) &
-                       ~(AT91_EMAC_CFG_SPD | AT91_EMAC_CFG_FD)
-                       ) | AT91_EMAC_CFG_SPD,
-                       &emac->cfg);
-               return 0;
-       }
-
-       if (stat1 & BMSR_10HALF) {
-               /*set MII for 10BaseT and Half Duplex  */
-               writel((readl(&emac->cfg) &
-                       ~(AT91_EMAC_CFG_SPD | AT91_EMAC_CFG_FD)),
-                       &emac->cfg);
-               return 0;
-       }
-       return 0;
-}
-
-static int at91emac_init(struct eth_device *netdev, struct bd_info *bd)
-{
-       int i;
-       u32 value;
-       emac_device *dev;
-       at91_emac_t *emac;
-       at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO;
-
-       emac = (at91_emac_t *) netdev->iobase;
-       dev = (emac_device *) netdev->priv;
-
-       /* PIO Disable Register */
-       value = ATMEL_PMX_AA_EMDIO |    ATMEL_PMX_AA_EMDC |
-               ATMEL_PMX_AA_ERXER |    ATMEL_PMX_AA_ERX1 |
-               ATMEL_PMX_AA_ERX0 |     ATMEL_PMX_AA_ECRS |
-               ATMEL_PMX_AA_ETX1 |     ATMEL_PMX_AA_ETX0 |
-               ATMEL_PMX_AA_ETXEN |    ATMEL_PMX_AA_EREFCK;
-
-       writel(value, &pio->pioa.pdr);
-       writel(value, &pio->pioa.mux.pio2.asr);
-
-#ifdef CONFIG_RMII
-       value = ATMEL_PMX_BA_ERXCK;
-#else
-       value = ATMEL_PMX_BA_ERXCK |    ATMEL_PMX_BA_ECOL |
-               ATMEL_PMX_BA_ERXDV |    ATMEL_PMX_BA_ERX3 |
-               ATMEL_PMX_BA_ERX2 |     ATMEL_PMX_BA_ETXER |
-               ATMEL_PMX_BA_ETX3 |     ATMEL_PMX_BA_ETX2;
-#endif
-       writel(value, &pio->piob.pdr);
-       writel(value, &pio->piob.mux.pio2.bsr);
-
-       at91_periph_clk_enable(ATMEL_ID_EMAC);
-
-       writel(readl(&emac->ctl) | AT91_EMAC_CTL_CSR, &emac->ctl);
-
-       /* Init Ethernet buffers */
-       for (i = 0; i < RBF_FRAMEMAX; i++) {
-               dev->rbfdt[i].addr = (unsigned long) net_rx_packets[i];
-               dev->rbfdt[i].size = 0;
-       }
-       dev->rbfdt[RBF_FRAMEMAX - 1].addr |= RBF_WRAP;
-       dev->rbindex = 0;
-       writel((u32) &(dev->rbfdt[0]), &emac->rbqp);
-
-       writel(readl(&emac->rsr) &
-               ~(AT91_EMAC_RSR_OVR | AT91_EMAC_RSR_REC | AT91_EMAC_RSR_BNA),
-               &emac->rsr);
-
-       value = AT91_EMAC_CFG_CAF |     AT91_EMAC_CFG_NBC |
-               HCLK_DIV;
-#ifdef CONFIG_RMII
-       value |= AT91_EMAC_CFG_RMII;
-#endif
-       writel(value, &emac->cfg);
-
-       writel(readl(&emac->ctl) | AT91_EMAC_CTL_TE | AT91_EMAC_CTL_RE,
-               &emac->ctl);
-
-       if (!at91emac_phy_init(netdev)) {
-               at91emac_UpdateLinkSpeed(emac);
-               return 0;
-       }
-       return -1;
-}
-
-static void at91emac_halt(struct eth_device *netdev)
-{
-       at91_emac_t *emac;
-
-       emac = (at91_emac_t *) netdev->iobase;
-       writel(readl(&emac->ctl) & ~(AT91_EMAC_CTL_TE | AT91_EMAC_CTL_RE),
-               &emac->ctl);
-       debug_cond(DEBUG_AT91EMAC, "halt MAC\n");
-}
-
-static int at91emac_send(struct eth_device *netdev, void *packet, int length)
-{
-       at91_emac_t *emac;
-
-       emac = (at91_emac_t *) netdev->iobase;
-
-       while (!(readl(&emac->tsr) & AT91_EMAC_TSR_BNQ))
-               ;
-       writel((u32) packet, &emac->tar);
-       writel(AT91_EMAC_TCR_LEN(length), &emac->tcr);
-       while (AT91_EMAC_TCR_LEN(readl(&emac->tcr)))
-               ;
-       debug_cond(DEBUG_AT91EMAC, "Send %d\n", length);
-       writel(readl(&emac->tsr) | AT91_EMAC_TSR_COMP, &emac->tsr);
-       return 0;
-}
-
-static int at91emac_recv(struct eth_device *netdev)
-{
-       emac_device *dev;
-       at91_emac_t *emac;
-       rbf_t *rbfp;
-       int size;
-
-       emac = (at91_emac_t *) netdev->iobase;
-       dev = (emac_device *) netdev->priv;
-
-       rbfp = &dev->rbfdt[dev->rbindex];
-       while (rbfp->addr & RBF_OWNER)  {
-               size = rbfp->size & RBF_SIZE;
-               net_process_received_packet(net_rx_packets[dev->rbindex], size);
-
-               debug_cond(DEBUG_AT91EMAC, "Recv[%ld]: %d bytes @ %lx\n",
-                       dev->rbindex, size, rbfp->addr);
-
-               rbfp->addr &= ~RBF_OWNER;
-               rbfp->size = 0;
-               if (dev->rbindex < (RBF_FRAMEMAX-1))
-                       dev->rbindex++;
-               else
-                       dev->rbindex = 0;
-
-               rbfp = &(dev->rbfdt[dev->rbindex]);
-               if (!(rbfp->addr & RBF_OWNER))
-                       writel(readl(&emac->rsr) | AT91_EMAC_RSR_REC,
-                               &emac->rsr);
-       }
-
-       if (readl(&emac->isr) & AT91_EMAC_IxR_RBNA) {
-               /* EMAC silicon bug 41.3.1 workaround 1 */
-               writel(readl(&emac->ctl) & ~AT91_EMAC_CTL_RE, &emac->ctl);
-               writel(readl(&emac->ctl) | AT91_EMAC_CTL_RE, &emac->ctl);
-               dev->rbindex = 0;
-               printf("%s: reset receiver (EMAC dead lock bug)\n",
-                       netdev->name);
-       }
-       return 0;
-}
-
-static int at91emac_write_hwaddr(struct eth_device *netdev)
-{
-       at91_emac_t *emac;
-       emac = (at91_emac_t *) netdev->iobase;
-
-       at91_periph_clk_enable(ATMEL_ID_EMAC);
-
-       debug_cond(DEBUG_AT91EMAC,
-               "init MAC-ADDR %02x:%02x:%02x:%02x:%02x:%02x\n",
-               netdev->enetaddr[5], netdev->enetaddr[4], netdev->enetaddr[3],
-               netdev->enetaddr[2], netdev->enetaddr[1], netdev->enetaddr[0]);
-       writel( (netdev->enetaddr[0] | netdev->enetaddr[1] << 8 |
-                       netdev->enetaddr[2] << 16 | netdev->enetaddr[3] << 24),
-                       &emac->sa2l);
-       writel((netdev->enetaddr[4] | netdev->enetaddr[5] << 8), &emac->sa2h);
-       debug_cond(DEBUG_AT91EMAC, "init MAC-ADDR %x%x\n",
-               readl(&emac->sa2h), readl(&emac->sa2l));
-       return 0;
-}
-
-int at91emac_register(struct bd_info *bis, unsigned long iobase)
-{
-       emac_device *emac;
-       emac_device *emacfix;
-       struct eth_device *dev;
-
-       if (iobase == 0)
-               iobase = ATMEL_BASE_EMAC;
-       emac = malloc(sizeof(*emac)+512);
-       if (emac == NULL)
-               return -1;
-       dev = malloc(sizeof(*dev));
-       if (dev == NULL) {
-               free(emac);
-               return -1;
-       }
-       /* alignment as per Errata (64 bytes) is insufficient! */
-       emacfix = (emac_device *) (((unsigned long) emac + 0x1ff) & 0xFFFFFE00);
-       memset(emacfix, 0, sizeof(emac_device));
-
-       memset(dev, 0, sizeof(*dev));
-       strcpy(dev->name, "emac");
-       dev->iobase = iobase;
-       dev->priv = emacfix;
-       dev->init = at91emac_init;
-       dev->halt = at91emac_halt;
-       dev->send = at91emac_send;
-       dev->recv = at91emac_recv;
-       dev->write_hwaddr = at91emac_write_hwaddr;
-
-       eth_register(dev);
-
-#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
-       int retval;
-       struct mii_dev *mdiodev = mdio_alloc();
-       if (!mdiodev)
-               return -ENOMEM;
-       strncpy(mdiodev->name, dev->name, MDIO_NAME_LEN);
-       mdiodev->read = at91emac_mii_read;
-       mdiodev->write = at91emac_mii_write;
-
-       retval = mdio_register(mdiodev);
-       if (retval < 0)
-               return retval;
-#endif
-       return 1;
-}
index 00a0993..fb18f09 100644 (file)
@@ -29,7 +29,6 @@ int board_interface_eth_init(struct udevice *dev,
 int cpu_eth_init(struct bd_info *bis);
 
 /* Driver initialization prototypes */
-int at91emac_register(struct bd_info *bis, unsigned long iobase);
 int ax88180_initialize(struct bd_info *bis);
 int bcm_sf2_eth_register(struct bd_info *bis, u8 dev_num);
 int bfin_EMAC_initialize(struct bd_info *bis);
index 3f22d7f..bf7a7d3 100644 (file)
@@ -228,8 +228,6 @@ CONFIG_DP_DDR_CTRL
 CONFIG_DP_DDR_DIMM_SLOTS_PER_CTLR
 CONFIG_DP_DDR_NUM_CTRLS
 CONFIG_DRAM_TIMINGS_
-CONFIG_DRIVER_AT91EMAC_PHYADDR
-CONFIG_DRIVER_AT91EMAC_QUIET
 CONFIG_DRIVER_DM9000
 CONFIG_DSP_CLUSTER_START
 CONFIG_DWCDDR21MCTL