mach-ux500: add ST-UIB platform data

The ST-UIB contains a matrix keypad interfaced with the
STMPE1601 port expander and a ROHM BU2101 touch panel.

Signed-off-by: Sundar Iyer <sundar.iyer@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

diff --git a/arch/arm/mach-ux500/board-mop500-stuib.c b/arch/arm/mach-ux500/board-mop500-stuib.c
index 7fa3021..8b6323e 100644 (file)
--- a/arch/arm/mach-ux500/board-mop500-stuib.c
+++ b/arch/arm/mach-ux500/board-mop500-stuib.c
@@ -6,9 +6,192 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/mfd/stmpe.h>
+#include <linux/input/bu21013.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/input/matrix_keypad.h>
 
 #include "board-mop500.h"
 
+/* STMPE/SKE keypad use this key layout */
+static const unsigned int mop500_keymap[] = {
+       KEY(2, 5, KEY_END),
+       KEY(4, 1, KEY_POWER),
+       KEY(3, 5, KEY_VOLUMEDOWN),
+       KEY(1, 3, KEY_3),
+       KEY(5, 2, KEY_RIGHT),
+       KEY(5, 0, KEY_9),
+
+       KEY(0, 5, KEY_MENU),
+       KEY(7, 6, KEY_ENTER),
+       KEY(4, 5, KEY_0),
+       KEY(6, 7, KEY_2),
+       KEY(3, 4, KEY_UP),
+       KEY(3, 3, KEY_DOWN),
+
+       KEY(6, 4, KEY_SEND),
+       KEY(6, 2, KEY_BACK),
+       KEY(4, 2, KEY_VOLUMEUP),
+       KEY(5, 5, KEY_1),
+       KEY(4, 3, KEY_LEFT),
+       KEY(3, 2, KEY_7),
+};
+
+static const struct matrix_keymap_data mop500_keymap_data = {
+       .keymap         = mop500_keymap,
+       .keymap_size    = ARRAY_SIZE(mop500_keymap),
+};
+/*
+ * STMPE1601
+ */
+static struct stmpe_keypad_platform_data stmpe1601_keypad_data = {
+       .debounce_ms    = 64,
+       .scan_count     = 8,
+       .no_autorepeat  = true,
+       .keymap_data    = &mop500_keymap_data,
+};
+
+static struct stmpe_platform_data stmpe1601_data = {
+       .id             = 1,
+       .blocks         = STMPE_BLOCK_KEYPAD,
+       .irq_trigger    = IRQF_TRIGGER_FALLING,
+       .irq_base       = MOP500_STMPE1601_IRQ(0),
+       .keypad         = &stmpe1601_keypad_data,
+       .autosleep      = true,
+       .autosleep_timeout = 1024,
+};
+
+static struct i2c_board_info __initdata mop500_i2c0_devices_stuib[] = {
+       {
+               I2C_BOARD_INFO("stmpe1601", 0x40),
+               .irq = NOMADIK_GPIO_TO_IRQ(218),
+               .platform_data = &stmpe1601_data,
+               .flags = I2C_CLIENT_WAKE,
+       },
+};
+
+/*
+ * BU21013 ROHM touchscreen interface on the STUIBs
+ */
+
+/* tracks number of bu21013 devices being enabled */
+static int bu21013_devices;
+
+#define TOUCH_GPIO_PIN  84
+
+#define TOUCH_XMAX     384
+#define TOUCH_YMAX     704
+
+#define PRCMU_CLOCK_OCR                0x1CC
+#define TSC_EXT_CLOCK_9_6MHZ   0x840000
+
+/**
+ * bu21013_gpio_board_init : configures the touch panel.
+ * @reset_pin: reset pin number
+ * This function can be used to configures
+ * the voltage and reset the touch panel controller.
+ */
+static int bu21013_gpio_board_init(int reset_pin)
+{
+       int retval = 0;
+
+       bu21013_devices++;
+       if (bu21013_devices == 1) {
+               retval = gpio_request(reset_pin, "touchp_reset");
+               if (retval) {
+                       printk(KERN_ERR "Unable to request gpio reset_pin");
+                       return retval;
+               }
+               retval = gpio_direction_output(reset_pin, 1);
+               if (retval < 0) {
+                       printk(KERN_ERR "%s: gpio direction failed\n",
+                                       __func__);
+                       return retval;
+               }
+       }
+
+       return retval;
+}
+
+/**
+ * bu21013_gpio_board_exit : deconfigures the touch panel controller
+ * @reset_pin: reset pin number
+ * This function can be used to deconfigures the chip selection
+ * for touch panel controller.
+ */
+static int bu21013_gpio_board_exit(int reset_pin)
+{
+       int retval = 0;
+
+       if (bu21013_devices == 1) {
+               retval = gpio_direction_output(reset_pin, 0);
+               if (retval < 0) {
+                       printk(KERN_ERR "%s: gpio direction failed\n",
+                                       __func__);
+                       return retval;
+               }
+               gpio_set_value(reset_pin, 0);
+       }
+       bu21013_devices--;
+
+       return retval;
+}
+
+/**
+ * bu21013_read_pin_val : get the interrupt pin value
+ * This function can be used to get the interrupt pin value for touch panel
+ * controller.
+ */
+static int bu21013_read_pin_val(void)
+{
+       return gpio_get_value(TOUCH_GPIO_PIN);
+}
+
+static struct bu21013_platform_device tsc_plat_device = {
+       .cs_en = bu21013_gpio_board_init,
+       .cs_dis = bu21013_gpio_board_exit,
+       .irq_read_val = bu21013_read_pin_val,
+       .irq = NOMADIK_GPIO_TO_IRQ(TOUCH_GPIO_PIN),
+       .cs_pin = GPIO_BU21013_CS,
+       .touch_x_max = TOUCH_XMAX,
+       .touch_y_max = TOUCH_YMAX,
+       .ext_clk = false,
+       .x_flip = false,
+       .y_flip = true,
+};
+
+static struct bu21013_platform_device tsc_plat2_device = {
+       .cs_en = bu21013_gpio_board_init,
+       .cs_dis = bu21013_gpio_board_exit,
+       .irq_read_val = bu21013_read_pin_val,
+       .irq = NOMADIK_GPIO_TO_IRQ(TOUCH_GPIO_PIN),
+       .cs_pin = GPIO_BU21013_CS,
+       .touch_x_max = TOUCH_XMAX,
+       .touch_y_max = TOUCH_YMAX,
+       .ext_clk = false,
+       .x_flip = false,
+       .y_flip = true,
+};
+
+static struct i2c_board_info __initdata u8500_i2c3_devices_stuib[] = {
+       {
+               I2C_BOARD_INFO("bu21013_tp", 0x5C),
+               .platform_data = &tsc_plat_device,
+       },
+       {
+               I2C_BOARD_INFO("bu21013_tp", 0x5D),
+               .platform_data = &tsc_plat2_device,
+       },
+
+};
+
 void __init mop500_stuib_init(void)
 {
+       mop500_uib_i2c_add(0, mop500_i2c0_devices_stuib,
+                       ARRAY_SIZE(mop500_i2c0_devices_stuib));
+
+       mop500_uib_i2c_add(3, u8500_i2c3_devices_stuib,
+                       ARRAY_SIZE(u8500_i2c3_devices_stuib));
 }

diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h
index cedf8eb..fe22b84 100644 (file)
--- a/arch/arm/mach-ux500/board-mop500.h
+++ b/arch/arm/mach-ux500/board-mop500.h
@@ -11,6 +11,7 @@
 
 /* GPIOs on the TC35892 expander */
 #define GPIO_SDMMC_CD                  MOP500_EGPIO(3)
+#define GPIO_BU21013_CS                        MOP500_EGPIO(13)
 #define GPIO_SDMMC_EN                  MOP500_EGPIO(17)
 #define GPIO_SDMMC_1V8_3V_SEL          MOP500_EGPIO(18)