Kconfig: Sort the device-access commands

These are currently not quite in alphabetical order. Before adding more,
sort them.

Signed-off-by: Simon Glass <sjg@chromium.org>
Suggested-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>

diff --git a/cmd/Kconfig b/cmd/Kconfig
index cd72ea8..b6e2ac3 100644 (file)
--- a/cmd/Kconfig
+++ b/cmd/Kconfig
@@ -483,6 +483,12 @@ endmenu
 
 menu "Device access commands"
 
+config CMD_ARMFLASH
+       #depends on FLASH_CFI_DRIVER
+       bool "armflash"
+       help
+         ARM Ltd reference designs flash partition access
+
 config CMD_CLK
        bool "clk - Show clock frequencies"
        help
@@ -492,6 +498,25 @@ config CMD_CLK
          clock values from associated drivers. However currently no command
          exists for this.
 
+config CMD_DEMO
+       bool "demo - Demonstration commands for driver model"
+       depends on DM
+       help
+         Provides a 'demo' command which can be used to play around with
+         driver model. To use this properly you will need to enable one or
+         both of the demo devices (DM_DEMO_SHAPE and DM_DEMO_SIMPLE).
+         Otherwise you will always get an empty list of devices. The demo
+         devices are defined in the sandbox device tree, so the easiest
+         option is to use sandbox and pass the -d point to sandbox's
+         u-boot.dtb file.
+
+config CMD_DFU
+       bool "dfu"
+       select USB_FUNCTION_DFU
+       help
+         Enables the command "dfu" which is used to have U-Boot create a DFU
+         class device via USB.
+
 config CMD_DM
        bool "dm - Access to driver model information"
        depends on DM
@@ -503,17 +528,88 @@ config CMD_DM
          can be useful to see the state of driver model for debugging or
          interest.
 
-config CMD_DEMO
-       bool "demo - Demonstration commands for driver model"
-       depends on DM
+config CMD_FDC
+       bool "fdcboot - Boot from floppy device"
        help
-         Provides a 'demo' command which can be used to play around with
-         driver model. To use this properly you will need to enable one or
-         both of the demo devices (DM_DEMO_SHAPE and DM_DEMO_SIMPLE).
-         Otherwise you will always get an empty list of devices. The demo
-         devices are defined in the sandbox device tree, so the easiest
-         option is to use sandbox and pass the -d point to sandbox's
-         u-boot.dtb file.
+         The 'fdtboot' command allows booting an image from a floppy disk.
+
+config CMD_FLASH
+       bool "flinfo, erase, protect"
+       default y
+       help
+         NOR flash support.
+           flinfo - print FLASH memory information
+           erase - FLASH memory
+           protect - enable or disable FLASH write protection
+
+config CMD_FPGA
+       bool "fpga"
+       default y
+       help
+         FPGA support.
+
+config CMD_FPGA_LOADBP
+       bool "fpga loadbp - load partial bitstream (Xilinx only)"
+       depends on CMD_FPGA
+       help
+         Supports loading an FPGA device from a bitstream buffer containing
+         a partial bitstream.
+
+config CMD_FPGA_LOADFS
+       bool "fpga loadfs - load bitstream from FAT filesystem (Xilinx only)"
+       depends on CMD_FPGA
+       help
+         Supports loading an FPGA device from a FAT filesystem.
+
+config CMD_FPGA_LOADMK
+       bool "fpga loadmk - load bitstream from image"
+       depends on CMD_FPGA
+       help
+         Supports loading an FPGA device from a image generated by mkimage.
+
+config CMD_FPGA_LOADP
+       bool "fpga loadp - load partial bitstream"
+       depends on CMD_FPGA
+       help
+         Supports loading an FPGA device from a bitstream buffer containing
+         a partial bitstream.
+
+config CMD_FPGAD
+       bool "fpgad - dump FPGA registers"
+       help
+         (legacy, needs conversion to driver model)
+         Provides a way to dump FPGA registers by calling the board-specific
+         fpga_get_reg() function. This functions similarly to the 'md'
+         command.
+
+config CMD_FUSE
+       bool "fuse - support for the fuse subssystem"
+       help
+         (deprecated - needs conversion to driver model)
+         This allows reading, sensing, programming or overriding fuses
+         which control the behaviour of the device. The command uses the
+         fuse_...() API.
+
+config CMD_GPIO
+       bool "gpio"
+       help
+         GPIO support.
+
+config CMD_GPT
+       bool "GPT (GUID Partition Table) command"
+       select PARTITION_UUIDS
+       select EFI_PARTITION
+       help
+         Enable the 'gpt' command to ready and write GPT style partition
+         tables.
+
+config CMD_GPT_RENAME
+       bool "GPT partition renaming commands"
+       depends on CMD_GPT
+       help
+         Enables the 'gpt' command to interchange names on two GPT
+         partitions via the 'gpt swap' command or to rename single
+         partitions via the 'rename' command.
 
 config CMD_IDE
        bool "ide - Support for IDE drivers"
@@ -566,6 +662,11 @@ config CMD_IOTRACE
          might be useful to enhance tracing to only checksum the accesses and
          not the data read/written.
 
+config CMD_I2C
+       bool "i2c"
+       help
+         I2C support.
+
 config CMD_LOADB
        bool "loadb"
        default y
@@ -578,37 +679,6 @@ config CMD_LOADS
        help
          Load an S-Record file over serial line
 
-config CMD_FLASH
-       bool "flinfo, erase, protect"
-       default y
-       help
-         NOR flash support.
-           flinfo - print FLASH memory information
-           erase - FLASH memory
-           protect - enable or disable FLASH write protection
-
-config CMD_GPT
-       bool "GPT (GUID Partition Table) command"
-       select PARTITION_UUIDS
-       select EFI_PARTITION
-       help
-         Enable the 'gpt' command to ready and write GPT style partition
-         tables.
-
-config CMD_GPT_RENAME
-       bool "GPT partition renaming commands"
-       depends on CMD_GPT
-       help
-         Enables the 'gpt' command to interchange names on two GPT
-         partitions via the 'gpt swap' command or to rename single
-         partitions via the 'rename' command.
-
-config CMD_ARMFLASH
-       #depends on FLASH_CFI_DRIVER
-       bool "armflash"
-       help
-         ARM Ltd reference designs flash partition access
-
 config CMD_MMC
        bool "mmc"
        help
@@ -646,6 +716,25 @@ config CMD_PART
          Read and display information about the partition table on
          various media.
 
+config CMD_REMOTEPROC
+       bool "remoteproc"
+       depends on REMOTEPROC
+       help
+         Support for Remote Processor control
+
+config CMD_SATA
+       bool "sata - Access SATA subsystem"
+       select SATA
+       help
+         SATA (Serial Advanced Technology Attachment) is a serial bus
+         standard for connecting to hard drives and other storage devices.
+         This command provides information about attached devices and allows
+         reading, writing and other operations.
+
+         SATA replaces PATA (originally just ATA), which stands for Parallel AT
+         Attachment, where AT refers to an IBM AT (Advanced Technology)
+         computer released in 1984.
+
 config CMD_SF
        bool "sf"
        help
@@ -656,105 +745,16 @@ config CMD_SPI
        help
          SPI utility command.
 
-config CMD_I2C
-       bool "i2c"
-       help
-         I2C support.
-
 config CMD_USB
        bool "usb"
        help
          USB support.
 
-config CMD_DFU
-       bool "dfu"
-       select USB_FUNCTION_DFU
-       help
-         Enables the command "dfu" which is used to have U-Boot create a DFU
-         class device via USB.
-
 config CMD_USB_MASS_STORAGE
        bool "UMS usb mass storage"
        help
          USB mass storage support
 
-config CMD_FPGA
-       bool "fpga"
-       default y
-       help
-         FPGA support.
-
-config CMD_FPGA_LOADBP
-       bool "fpga loadbp - load partial bitstream (Xilinx only)"
-       depends on CMD_FPGA
-       help
-         Supports loading an FPGA device from a bitstream buffer containing
-         a partial bitstream.
-
-config CMD_FPGA_LOADFS
-       bool "fpga loadfs - load bitstream from FAT filesystem (Xilinx only)"
-       depends on CMD_FPGA
-       help
-         Supports loading an FPGA device from a FAT filesystem.
-
-config CMD_FPGA_LOADMK
-       bool "fpga loadmk - load bitstream from image"
-       depends on CMD_FPGA
-       help
-         Supports loading an FPGA device from a image generated by mkimage.
-
-config CMD_FPGA_LOADP
-       bool "fpga loadp - load partial bitstream"
-       depends on CMD_FPGA
-       help
-         Supports loading an FPGA device from a bitstream buffer containing
-         a partial bitstream.
-
-config CMD_FPGAD
-       bool "fpgad - dump FPGA registers"
-       help
-         (legacy, needs conversion to driver model)
-         Provides a way to dump FPGA registers by calling the board-specific
-         fpga_get_reg() function. This functions similarly to the 'md'
-         command.
-
-config CMD_FUSE
-       bool "fuse - support for the fuse subssystem"
-       help
-         (deprecated - needs conversion to driver model)
-         This allows reading, sensing, programming or overriding fuses
-         which control the behaviour of the device. The command uses the
-         fuse_...() API.
-
-config CMD_REMOTEPROC
-       bool "remoteproc"
-       depends on REMOTEPROC
-       help
-         Support for Remote Processor control
-
-config CMD_GPIO
-       bool "gpio"
-       help
-         GPIO support.
-
-config CMD_FDC
-       bool "fdcboot - Boot from floppy device"
-       help
-         The 'fdtboot' command allows booting an image from a floppy disk.
-
-config CMD_SATA
-       bool "sata - Access SATA subsystem"
-       select SATA
-       help
-         SATA (Serial Advanced Technology Attachment) is a serial bus
-         standard for connecting to hard drives and other storage devices.
-         This command provides information about attached devices and allows
-         reading, writing and other operations.
-
-         SATA replaces PATA (originally just ATA), which stands for Parallel AT
-         Attachment, where AT refers to an IBM AT (Advanced Technology)
-         computer released in 1984.
-
 endmenu