dt-bindings: power: Convert imx gpc to json-schema

Convert the i.MX GPC binding to DT schema format using json-schema

>From latest reference manual, there is actually ONLY 1 interrupt for
GPC, so the additional GPC interrupt is removed.

Consumer's example is also removed since it is NOT that useful.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Rob Herring <robh@kernel.org>

diff --git a/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt b/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt
deleted file mode 100644 (file)
index f0f5553..0000000
--- a/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt
+++ /dev/null
@@ -1,91 +0,0 @@
-Freescale i.MX General Power Controller
-=======================================
-
-The i.MX6 General Power Control (GPC) block contains DVFS load tracking
-counters and Power Gating Control (PGC).
-
-Required properties:
-- compatible: Should be one of the following:
-  - fsl,imx6q-gpc
-  - fsl,imx6qp-gpc
-  - fsl,imx6sl-gpc
-  - fsl,imx6sx-gpc
-- reg: should be register base and length as documented in the
-  datasheet
-- interrupts: Should contain one interrupt specifier for the GPC interrupt
-- clocks: Must contain an entry for each entry in clock-names.
-  See Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
-- clock-names: Must include the following entries:
-  - ipg
-
-The power domains are generic power domain providers as documented in
-Documentation/devicetree/bindings/power/power-domain.yaml. They are described as
-subnodes of the power gating controller 'pgc' node of the GPC and should
-contain the following:
-
-Required properties:
-- reg: Must contain the DOMAIN_INDEX of this power domain
-  The following DOMAIN_INDEX values are valid for i.MX6Q:
-  ARM_DOMAIN     0
-  PU_DOMAIN      1
-  The following additional DOMAIN_INDEX value is valid for i.MX6SL:
-  DISPLAY_DOMAIN 2
-  The following additional DOMAIN_INDEX value is valid for i.MX6SX:
-  PCI_DOMAIN     3
-
-- #power-domain-cells: Should be 0
-
-Optional properties:
-- clocks: a number of phandles to clocks that need to be enabled during domain
-  power-up sequencing to ensure reset propagation into devices located inside
-  this power domain
-- power-supply: a phandle to the regulator powering this domain
-
-Example:
-
-       gpc: gpc@20dc000 {
-               compatible = "fsl,imx6q-gpc";
-               reg = <0x020dc000 0x4000>;
-               interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>,
-                            <0 90 IRQ_TYPE_LEVEL_HIGH>;
-               clocks = <&clks IMX6QDL_CLK_IPG>;
-               clock-names = "ipg";
-
-               pgc {
-                       #address-cells = <1>;
-                       #size-cells = <0>;
-
-                       power-domain@0 {
-                               reg = <0>;
-                               #power-domain-cells = <0>;
-                       };
-
-                       pd_pu: power-domain@1 {
-                               reg = <1>;
-                               #power-domain-cells = <0>;
-                               power-supply = <&reg_pu>;
-                               clocks = <&clks IMX6QDL_CLK_GPU3D_CORE>,
-                                        <&clks IMX6QDL_CLK_GPU3D_SHADER>,
-                                        <&clks IMX6QDL_CLK_GPU2D_CORE>,
-                                        <&clks IMX6QDL_CLK_GPU2D_AXI>,
-                                        <&clks IMX6QDL_CLK_OPENVG_AXI>,
-                                        <&clks IMX6QDL_CLK_VPU_AXI>;
-                       };
-               };
-       };
-
-
-Specifying power domain for IP modules
-======================================
-
-IP cores belonging to a power domain should contain a 'power-domains' property
-that is a phandle pointing to the power domain the device belongs to.
-
-Example of a device that is part of the PU power domain:
-
-       vpu: vpu@2040000 {
-               reg = <0x02040000 0x3c000>;
-               /* ... */
-               power-domains = <&pd_pu>;
-               /* ... */
-       };

diff --git a/Documentation/devicetree/bindings/power/fsl,imx-gpc.yaml b/Documentation/devicetree/bindings/power/fsl,imx-gpc.yaml
new file mode 100644 (file)
index 0000000..a055b3e
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/fsl,imx-gpc.yaml
@@ -0,0 +1,124 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/fsl,imx-gpc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX General Power Controller
+
+maintainers:
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+  The i.MX6 General Power Control (GPC) block contains DVFS load tracking
+  counters and Power Gating Control (PGC).
+
+  The power domains are generic power domain providers as documented in
+  Documentation/devicetree/bindings/power/power-domain.yaml. They are
+  described as subnodes of the power gating controller 'pgc' node of the GPC.
+
+  IP cores belonging to a power domain should contain a 'power-domains'
+  property that is a phandle pointing to the power domain the device belongs
+  to.
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx6q-gpc
+      - fsl,imx6qp-gpc
+      - fsl,imx6sl-gpc
+      - fsl,imx6sx-gpc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: ipg
+
+  pgc:
+    type: object
+    description: list of power domains provided by this controller.
+
+    patternProperties:
+      "power-domain@[0-9]$":
+        type: object
+        properties:
+
+          '#power-domain-cells':
+            const: 0
+
+          reg:
+            description: |
+              The following DOMAIN_INDEX values are valid for i.MX6Q:
+                ARM_DOMAIN     0
+                PU_DOMAIN      1
+              The following additional DOMAIN_INDEX value is valid for i.MX6SL:
+                DISPLAY_DOMAIN 2
+              The following additional DOMAIN_INDEX value is valid for i.MX6SX:
+                PCI_DOMAIN     3
+            maxItems: 1
+
+          clocks:
+            description: |
+              A number of phandles to clocks that need to be enabled during domain
+              power-up sequencing to ensure reset propagation into devices located
+              inside this power domain.
+            minItems: 1
+            maxItems: 7
+
+          power-supply: true
+
+        required:
+          - '#power-domain-cells'
+          - reg
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - pgc
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx6qdl-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    gpc@20dc000 {
+        compatible = "fsl,imx6q-gpc";
+        reg = <0x020dc000 0x4000>;
+        interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clks IMX6QDL_CLK_IPG>;
+        clock-names = "ipg";
+
+        pgc {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            power-domain@0 {
+                reg = <0>;
+                #power-domain-cells = <0>;
+            };
+
+            pd_pu: power-domain@1 {
+                reg = <1>;
+                #power-domain-cells = <0>;
+                power-supply = <&reg_pu>;
+                clocks = <&clks IMX6QDL_CLK_GPU3D_CORE>,
+                         <&clks IMX6QDL_CLK_GPU3D_SHADER>,
+                         <&clks IMX6QDL_CLK_GPU2D_CORE>,
+                         <&clks IMX6QDL_CLK_GPU2D_AXI>,
+                         <&clks IMX6QDL_CLK_OPENVG_AXI>,
+                         <&clks IMX6QDL_CLK_VPU_AXI>;
+            };
+        };
+    };