README: Update

The wayland README had outdated build instructions for weston.  Let's just
trim it down to build instructions for wayland and a link to the web site.

diff --git a/README b/README
index 64904ed..5f85888 100644 (file)
--- a/README
+++ b/README
@@ -17,114 +17,19 @@ protocol does not handle rendering, which is one of the features that
 makes wayland so simple.  All clients are expected to handle rendering
 themselves, typically through cairo or OpenGL.
 
-The wayland repository includes a compositor and a few clients, but
-both the compositor and clients are essentially test cases.
-
-
-Building Instructions
-
-The instructions below assume some familiarity with git and building
-and running experimental software.  And be prepared that this project
-isn't at all useful right now, it's still very much a prototype.  When
-the instructions suggest to clone a git repo, you can of course just
-add a remote and fetch instead, if you have a clone of that repo
-around already.  I usually install all software I'm working on into
-$HOME/install, so that's what I'll use in the instructions below, but
-you can use your favorite directory of course or install over your
-system copy (pass --prefix=/usr --sysconfdir=/etc, generally).
-
-
-Modesetting
-
-At this point, kernel modesetting is upstream for Intel, AMD and
-nVidia chipsets.  Most distributions ship with kernel modesetting
-enabled by default and will work with Wayland out of the box.  The
-modesetting driver must also support the page flip ioctl, which only
-the intel driver does at this point.
-
-
-Building mesa
-
-Wayland uses the mesa EGL stack, and all extensions required to run
-EGL on KMS are now upstream on the master branch.  The 7.9 release of
-mesa will have all these extensions, but for now you'll need to build
-mesa master:
-
-    $ git clone git://anongit.freedesktop.org/mesa/mesa
-    $ cd mesa
-    $ ./configure --prefix=$HOME/install  --enable-egl --enable-gles2
-    $ make && make install
-
-If you're using an intel chipset, it's best to also pass
---disable-gallium to ./configure, since otherwise libEGL will try to
-load the gallium sw rasterizer before loading the Intel DRI driver.
-
-
-libxkbcommon
-
-Wayland needs libxkbcommon for translating evdev keycodes to keysyms.
-There's a couple of repos around, and we're trying to consolidate the
-development, but for wayland you'll need the repo from my git
-repository.  For this you'll need development packages for xproto,
-kbproto and libX11.
-
-    $ git clone git://people.freedesktop.org/~krh/libxkbcommon.git
-    $ cd libxkbcommon/
-    $ ./autogen.sh --prefix=$HOME/install
-    $ make && make install
-
-
-cairo-gl
-
-The Wayland clients render using cairo-gl, which is an experimental
-cairo backend.  It has been available since cairo 1.10.  Unless your
-distribution ships cairo with the gl backend enabled, you'll need to
-compile your own version of cairo:
-
-    $ git clone git://anongit.freedesktop.org/cairo
-    $ cd cairo
-    $ ./autogen.sh --prefix=$HOME/install --enable-gl
-    $ make && make install
-
-
-Wayland
-
-With mesa and libxkbcommon in place, we can checkout and build
-Wayland.  Aside from mesa, Wayland needs development packages for
-gdk-pixbuf-2.0, libudev, libdrm, xcb-dri2, xcb-fixes (for X
-compositor) cairo-gl, glib-2.0, gdk-2.0 (for poppler) and
-poppler-glib:
-
-    $ git clone git://people.freedesktop.org/~krh/wayland
-    $ ./autogen.sh --prefix=$HOME/install
-    $ make && make install
-
-Installing into a non-/usr prefix is fine, but the 70-wayland.rules
-udev rule file has to be installed in /etc/udev/rules.d.  Once
-installed, either reboot or run
-
-    $ sudo udevadm trigger --subsystem-match=drm --subsystem-match=input
-
-to make udev label the devices wayland will use.
-
-If DISPLAY is set, the wayland compositor will run under X in a window
-and take input from X.  Otherwise it will run on the KMS framebuffer
-and take input from evdev devices.  Pick a background image that you
-like and copy it to the Wayland source directory as background.jpg or
-use the -b command line option:
-
-    $ ./wayland-system-compositor -b my-image.jpg
-
-To run clients, switch to a different VT and run the client from
-there.  Or run it under X and start up the clients from a terminal
-window.  There are a few demo clients available, but they are all
-pretty simple and mostly for testing specific features in the wayland
-protocol: 'terminal' is a simple terminal emulator, not very compliant
-at all, but works well enough for bash
-
-    'flower' moves a flower around the screen, testing the frame protocol
-    'gears' glxgears, but for wayland, currently broken
-    'image' loads the image files passed on the command line and shows them
-
-    'view' does the same for pdf files, but needs file URIs
-    (file:///path/to/pdf)
+The weston compositor is a reference implementation of a wayland
+compositor and the weston repository also includes a few example
+clients clients.
+
+Building the wayland libraries is fairly simple, aside from libffi,
+they don't have many dependencies:
+
+    $ git clone git://anongit.freedesktop.org/wayland/wayland
+    $ cd wayland
+    $ ./autogen.sh --prefix=PREFIX
+    $ make
+    $ make install
+
+where PREFIX is where you want to install the libraries.  See
+http://wayland.freedesktop.org for more complete build instructions
+for wayland, weston, xwayland and various toolkits.
\ No newline at end of file