mtd: sh_flctl: Use cached register value for FLCMNCR
authorBastian Hecht <hechtb@googlemail.com>
Thu, 1 Mar 2012 09:48:39 +0000 (10:48 +0100)
committerDavid Woodhouse <David.Woodhouse@intel.com>
Mon, 26 Mar 2012 23:42:57 +0000 (00:42 +0100)
Instead of reading out the register, use a cached value. This will
make way for a proper runtime power management implementation.

Signed-off-by: Bastian Hecht <hechtb@gmail.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
drivers/mtd/nand/sh_flctl.c
include/linux/mtd/sh_flctl.h

index 61e41c0..48d5da0 100644 (file)
@@ -283,7 +283,7 @@ static void write_fiforeg(struct sh_flctl *flctl, int rlen, int offset)
 static void set_cmd_regs(struct mtd_info *mtd, uint32_t cmd, uint32_t flcmcdr_val)
 {
        struct sh_flctl *flctl = mtd_to_flctl(mtd);
-       uint32_t flcmncr_val = readl(FLCMNCR(flctl)) & ~SEL_16BIT;
+       uint32_t flcmncr_val = flctl->flcmncr_base & ~SEL_16BIT;
        uint32_t flcmdcr_val, addr_len_bytes = 0;
 
        /* Set SNAND bit if page size is 2048byte */
@@ -684,16 +684,15 @@ read_normal_exit:
 static void flctl_select_chip(struct mtd_info *mtd, int chipnr)
 {
        struct sh_flctl *flctl = mtd_to_flctl(mtd);
-       uint32_t flcmncr_val = readl(FLCMNCR(flctl));
 
        switch (chipnr) {
        case -1:
-               flcmncr_val &= ~CE0_ENABLE;
-               writel(flcmncr_val, FLCMNCR(flctl));
+               flctl->flcmncr_base &= ~CE0_ENABLE;
+               writel(flctl->flcmncr_base, FLCMNCR(flctl));
                break;
        case 0:
-               flcmncr_val |= CE0_ENABLE;
-               writel(flcmncr_val, FLCMNCR(flctl));
+               flctl->flcmncr_base |= CE0_ENABLE;
+               writel(flctl->flcmncr_base, FLCMNCR(flctl));
                break;
        default:
                BUG();
@@ -751,11 +750,6 @@ static int flctl_verify_buf(struct mtd_info *mtd, const u_char *buf, int len)
        return 0;
 }
 
-static void flctl_register_init(struct sh_flctl *flctl, unsigned long val)
-{
-       writel(val, FLCMNCR(flctl));
-}
-
 static int flctl_chip_init_tail(struct mtd_info *mtd)
 {
        struct sh_flctl *flctl = mtd_to_flctl(mtd);
@@ -807,8 +801,7 @@ static int flctl_chip_init_tail(struct mtd_info *mtd)
                chip->ecc.mode = NAND_ECC_HW;
 
                /* 4 symbols ECC enabled */
-               writel(readl(FLCMNCR(flctl)) | _4ECCEN | ECCPOS2 | ECCPOS_02,
-                               FLCMNCR(flctl));
+               flctl->flcmncr_base |= _4ECCEN | ECCPOS2 | ECCPOS_02;
        } else {
                chip->ecc.mode = NAND_ECC_SOFT;
        }
@@ -854,10 +847,9 @@ static int __devinit flctl_probe(struct platform_device *pdev)
        nand = &flctl->chip;
        flctl_mtd->priv = nand;
        flctl->pdev = pdev;
+       flctl->flcmncr_base = pdata->flcmncr_val;
        flctl->hwecc = pdata->has_hwecc;
 
-       flctl_register_init(flctl, pdata->flcmncr_val);
-
        nand->options = NAND_NO_AUTOINCR;
 
        /* Set address of hardware control function */
index b669405..c708282 100644 (file)
@@ -132,6 +132,7 @@ struct sh_flctl {
        int     erase1_page_addr;       /* page_addr in ERASE1 cmd */
        uint32_t erase_ADRCNT;          /* bits of FLCMDCR in ERASE1 cmd */
        uint32_t rw_ADRCNT;     /* bits of FLCMDCR in READ WRITE cmd */
+       uint32_t flcmncr_base;  /* base value of FLCMNCR */
 
        int     hwecc_cant_correct[4];