+++ /dev/null
-Qualcomm SPMI Regulators
-
-- compatible:
- Usage: required
- Value type: <string>
- Definition: must be one of:
- "qcom,pm8004-regulators"
- "qcom,pm8005-regulators"
- "qcom,pm8226-regulators"
- "qcom,pm8841-regulators"
- "qcom,pm8916-regulators"
- "qcom,pm8941-regulators"
- "qcom,pm8950-regulators"
- "qcom,pm8994-regulators"
- "qcom,pmi8994-regulators"
- "qcom,pm660-regulators"
- "qcom,pm660l-regulators"
- "qcom,pms405-regulators"
-
-- interrupts:
- Usage: optional
- Value type: <prop-encoded-array>
- Definition: List of OCP interrupts.
-
-- interrupt-names:
- Usage: required if 'interrupts' property present
- Value type: <string-array>
- Definition: List of strings defining the names of the
- interrupts in the 'interrupts' property 1-to-1.
- Supported values are "ocp-<regulator_name>", where
- <regulator_name> corresponds to a voltage switch
- type regulator.
-
-- vdd_s1-supply:
-- vdd_s2-supply:
-- vdd_s3-supply:
-- vdd_s4-supply:
-- vdd_s5-supply:
-- vdd_s6-supply:
-- vdd_s7-supply:
-- vdd_s8-supply:
- Usage: optional (pm8841 only)
- Value type: <phandle>
- Definition: Reference to regulator supplying the input pin, as
- described in the data sheet.
-
-- vdd_s1-supply:
-- vdd_s2-supply:
-- vdd_s3-supply:
-- vdd_s4-supply:
-- vdd_l1_l3-supply:
-- vdd_l2-supply:
-- vdd_l4_l5_l6-supply:
-- vdd_l7-supply:
-- vdd_l8_l11_l14_l15_l16-supply:
-- vdd_l9_l10_l12_l13_l17_l18-supply:
- Usage: optional (pm8916 only)
- Value type: <phandle>
- Definition: Reference to regulator supplying the input pin, as
- described in the data sheet.
-
-- vdd_s1-supply:
-- vdd_s2-supply:
-- vdd_s3-supply:
-- vdd_l1_l3-supply:
-- vdd_l2_lvs_1_2_3-supply:
-- vdd_l4_l11-supply:
-- vdd_l5_l7-supply:
-- vdd_l6_l12_l14_l15-supply:
-- vdd_l8_l16_l18_19-supply:
-- vdd_l9_l10_l17_l22-supply:
-- vdd_l13_l20_l23_l24-supply:
-- vdd_l21-supply:
-- vin_5vs-supply:
- Usage: optional (pm8941 only)
- Value type: <phandle>
- Definition: Reference to regulator supplying the input pin, as
- described in the data sheet.
-
-- vdd_s1-supply:
-- vdd_s2-supply:
-- vdd_s3-supply:
-- vdd_s4-supply:
-- vdd_s4-supply:
-- vdd_s5-supply:
-- vdd_s6-supply:
-- vdd_l1_l19-supply:
-- vdd_l2_l23-supply:
-- vdd_l3-supply:
-- vdd_l4_l5_l6_l7_l16-supply:
-- vdd_l8_l11_l12_l17_l22-supply:
-- vdd_l9_l10_l13_l14_l15_l18-supply:
-- vdd_l20-supply:
-- vdd_l21-supply:
- Usage: optional (pm8950 only)
- Value type: <phandle>
- Definition: reference to regulator supplying the input pin, as
- described in the data sheet
-
-- vdd_s1-supply:
-- vdd_s2-supply:
-- vdd_s3-supply:
-- vdd_s4-supply:
-- vdd_s5-supply:
-- vdd_s6-supply:
-- vdd_s7-supply:
-- vdd_s8-supply:
-- vdd_s9-supply:
-- vdd_s10-supply:
-- vdd_s11-supply:
-- vdd_s12-supply:
-- vdd_l1-supply:
-- vdd_l2_l26_l28-supply:
-- vdd_l3_l11-supply:
-- vdd_l4_l27_l31-supply:
-- vdd_l5_l7-supply:
-- vdd_l6_l12_l32-supply:
-- vdd_l8_l16_l30-supply:
-- vdd_l9_l10_l18_l22-supply:
-- vdd_l13_l19_l23_l24-supply:
-- vdd_l14_l15-supply:
-- vdd_l17_l29-supply:
-- vdd_l20_l21-supply:
-- vdd_l25-supply:
-- vdd_lvs_1_2-supply:
- Usage: optional (pm8994 only)
- Value type: <phandle>
- Definition: Reference to regulator supplying the input pin, as
- described in the data sheet.
-
-- vdd_s1-supply:
-- vdd_s2-supply:
-- vdd_s3-supply:
-- vdd_l1-supply:
- Usage: optional (pmi8994 only)
- Value type: <phandle>
- Definition: Reference to regulator supplying the input pin, as
- described in the data sheet.
-
-- vdd_l1_l6_l7-supply:
-- vdd_l2_l3-supply:
-- vdd_l5-supply:
-- vdd_l8_l9_l10_l11_l12_l13_l14-supply:
-- vdd_l15_l16_l17_l18_l19-supply:
-- vdd_s1-supply:
-- vdd_s2-supply:
-- vdd_s3-supply:
-- vdd_s5-supply:
-- vdd_s6-supply:
- Usage: optional (pm660 only)
- Value type: <phandle>
- Definition: Reference to regulator supplying the input pin, as
- described in the data sheet.
-
-- vdd_l1_l9_l10-supply:
-- vdd_l2-supply:
-- vdd_l3_l5_l7_l8-supply:
-- vdd_l4_l6-supply:
-- vdd_s1-supply:
-- vdd_s2-supply:
-- vdd_s3-supply:
-- vdd_s4-supply:
-- vdd_s5-supply:
- Usage: optional (pm660l only)
- Value type: <phandle>
- Definition: Reference to regulator supplying the input pin, as
- described in the data sheet.
-
-- vdd_l1_l2-supply:
-- vdd_l3_l8-supply:
-- vdd_l4-supply:
-- vdd_l5_l6-supply:
-- vdd_l10_l11_l12_l13-supply:
-- vdd_l7-supply:
-- vdd_l9-supply:
-- vdd_s1-supply:
-- vdd_s2-supply:
-- vdd_s3-supply:
-- vdd_s4-supply:
-- vdd_s5-supply
- Usage: optional (pms405 only)
- Value type: <phandle>
- Definition: Reference to regulator supplying the input pin, as
- described in the data sheet.
-
-- qcom,saw-reg:
- Usage: optional
- Value type: <phandle>
- Description: Reference to syscon node defining the SAW registers.
-
-
-The regulator node houses sub-nodes for each regulator within the device. Each
-sub-node is identified using the node's name, with valid values listed for each
-of the PMICs below.
-
-pm8004:
- s2, s5
-
-pm8005:
- s1, s2, s3, s4
-
-pm8841:
- s1, s2, s3, s4, s5, s6, s7, s8
-
-pm8916:
- s1, s2, s3, s4, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l13,
- l14, l15, l16, l17, l18
-
-pm8941:
- s1, s2, s3, s4, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l13,
- l14, l15, l16, l17, l18, l19, l20, l21, l22, l23, l24, lvs1, lvs2, lvs3,
- 5vs1, 5vs2
-
-pm8994:
- s1, s2, s3, s4, s5, s6, s7, s8, s9, s10, s11, s12, l1, l2, l3, l4, l5,
- l6, l7, l8, l9, l10, l11, l12, l13, l14, l15, l16, l17, l18, l19, l20,
- l21, l22, l23, l24, l25, l26, l27, l28, l29, l30, l31, l32, lvs1, lvs2
-
-pmi8994:
- s1, s2, s3, l1
-
-The content of each sub-node is defined by the standard binding for regulators -
-see regulator.txt - with additional custom properties described below:
-
-- regulator-initial-mode:
- Usage: optional
- Value type: <u32>
- Description: 2 = Set initial mode to auto mode (automatically select
- between HPM and LPM); not available on boost type
- regulators.
-
- 1 = Set initial mode to high power mode (HPM), also referred
- to as NPM. HPM consumes more ground current than LPM, but
- it can source significantly higher load current. HPM is not
- available on boost type regulators. For voltage switch type
- regulators, HPM implies that over current protection and
- soft start are active all the time.
-
- 0 = Set initial mode to low power mode (LPM).
-
-- qcom,ocp-max-retries:
- Usage: optional
- Value type: <u32>
- Description: Maximum number of times to try toggling a voltage switch
- off and back on as a result of consecutive over current
- events.
-
-- qcom,ocp-retry-delay:
- Usage: optional
- Value type: <u32>
- Description: Time to delay in milliseconds between each voltage switch
- toggle after an over current event takes place.
-
-- qcom,pin-ctrl-enable:
- Usage: optional
- Value type: <u32>
- Description: Bit mask specifying which hardware pins should be used to
- enable the regulator, if any; supported bits are:
- 0 = ignore all hardware enable signals
- BIT(0) = follow HW0_EN signal
- BIT(1) = follow HW1_EN signal
- BIT(2) = follow HW2_EN signal
- BIT(3) = follow HW3_EN signal
-
-- qcom,pin-ctrl-hpm:
- Usage: optional
- Value type: <u32>
- Description: Bit mask specifying which hardware pins should be used to
- force the regulator into high power mode, if any;
- supported bits are:
- 0 = ignore all hardware enable signals
- BIT(0) = follow HW0_EN signal
- BIT(1) = follow HW1_EN signal
- BIT(2) = follow HW2_EN signal
- BIT(3) = follow HW3_EN signal
- BIT(4) = follow PMIC awake state
-
-- qcom,vs-soft-start-strength:
- Usage: optional
- Value type: <u32>
- Description: This property sets the soft start strength for voltage
- switch type regulators; supported values are:
- 0 = 0.05 uA
- 1 = 0.25 uA
- 2 = 0.55 uA
- 3 = 0.75 uA
-
-- qcom,saw-slave:
- Usage: optional
- Value type: <boo>
- Description: SAW controlled gang slave. Will not be configured.
-
-- qcom,saw-leader:
- Usage: optional
- Value type: <boo>
- Description: SAW controlled gang leader. Will be configured as
- SAW regulator.
-
-Example:
-
- regulators {
- compatible = "qcom,pm8941-regulators";
- vdd_l1_l3-supply = <&s1>;
-
- s1: s1 {
- regulator-min-microvolt = <1300000>;
- regulator-max-microvolt = <1400000>;
- };
-
- ...
-
- l1: l1 {
- regulator-min-microvolt = <1225000>;
- regulator-max-microvolt = <1300000>;
- };
-
- ....
- };
-
-Example 2:
-
- saw3: syscon@9A10000 {
- compatible = "syscon";
- reg = <0x9A10000 0x1000>;
- };
-
- ...
-
- spm-regulators {
- compatible = "qcom,pm8994-regulators";
- qcom,saw-reg = <&saw3>;
- s8 {
- qcom,saw-slave;
- };
- s9 {
- qcom,saw-slave;
- };
- s10 {
- qcom,saw-slave;
- };
- pm8994_s11_saw: s11 {
- qcom,saw-leader;
- regulator-always-on;
- regulator-min-microvolt = <900000>;
- regulator-max-microvolt = <1140000>;
- };
- };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/qcom,spmi-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SPMI Regulators
+
+maintainers:
+ - Robert Marko <robimarko@gmail.com>
+
+properties:
+ compatible:
+ enum:
+ - qcom,pm660-regulators
+ - qcom,pm660l-regulators
+ - qcom,pm8004-regulators
+ - qcom,pm8005-regulators
+ - qcom,pm8226-regulators
+ - qcom,pm8841-regulators
+ - qcom,pm8916-regulators
+ - qcom,pm8941-regulators
+ - qcom,pm8950-regulators
+ - qcom,pm8994-regulators
+ - qcom,pmi8994-regulators
+ - qcom,pms405-regulators
+
+ qcom,saw-reg:
+ description: Reference to syscon node defining the SAW registers
+ $ref: /schemas/types.yaml#/definitions/phandle
+
+patternProperties:
+ "^(5vs[1-2]|(l|s)[1-9][0-9]?|lvs[1-3])$":
+ description: List of regulators and its properties
+ type: object
+ $ref: regulator.yaml#
+
+ properties:
+ qcom,ocp-max-retries:
+ description:
+ Maximum number of times to try toggling a voltage switch off and
+ back on as a result of consecutive over current events
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ qcom,ocp-retry-delay:
+ description:
+ Time to delay in milliseconds between each voltage switch toggle
+ after an over current event takes place
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ qcom,pin-ctrl-enable:
+ description:
+ Bit mask specifying which hardware pins should be used to enable the
+ regulator, if any.
+ Supported bits are
+ 0 = ignore all hardware enable signals
+ BIT(0) = follow HW0_EN signal
+ BIT(1) = follow HW1_EN signal
+ BIT(2) = follow HW2_EN signal
+ BIT(3) = follow HW3_EN signal
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 15
+
+ qcom,pin-ctrl-hpm:
+ description:
+ Bit mask specifying which hardware pins should be used to force the
+ regulator into high power mode, if any.
+ Supported bits are
+ 0 = ignore all hardware enable signals
+ BIT(0) = follow HW0_EN signal
+ BIT(1) = follow HW1_EN signal
+ BIT(2) = follow HW2_EN signal
+ BIT(3) = follow HW3_EN signal
+ BIT(4) = follow PMIC awake state
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 31
+
+ qcom,vs-soft-start-strength:
+ description:
+ This property sets the soft start strength for voltage switch type
+ regulators.
+ Supported values are
+ 0 = 0.05 uA
+ 1 = 0.25 uA
+ 2 = 0.55 uA
+ 3 = 0.75 uA
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 3
+
+ qcom,saw-slave:
+ description: SAW controlled gang slave. Will not be configured.
+ type: boolean
+
+ qcom,saw-leader:
+ description:
+ SAW controlled gang leader. Will be configured as SAW regulator.
+ type: boolean
+
+ unevaluatedProperties: false
+
+required:
+ - compatible
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,pm660-regulators
+ then:
+ properties:
+ vdd_l15_l16_l17_l18_l19-supply: true
+ vdd_l1_l6_l7-supply: true
+ vdd_l2_l3-supply: true
+ vdd_l5-supply: true
+ vdd_l8_l9_l10_l11_l12_l13_l14-supply: true
+ patternProperties:
+ "^vdd_s[1-6]-supply$": true
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,pm660l-regulators
+ then:
+ properties:
+ vdd_l1_l9_l10-supply: true
+ vdd_l2-supply: true
+ vdd_l3_l5_l7_l8-supply: true
+ vdd_l4_l6-supply: true
+ patternProperties:
+ "^vdd_s[1-5]-supply$": true
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,pm8004-regulators
+ then:
+ patternProperties:
+ "^vdd_s[25]-supply$": true
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,pm8005-regulators
+ then:
+ patternProperties:
+ "^vdd_s[1-4]-supply$": true
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,pm8226-regulators
+ then:
+ properties:
+ vdd_l10_l11_l13-supply: true
+ vdd_l12_l14-supply: true
+ vdd_l15_l16_l17_l18-supply: true
+ vdd_l19_l20_l21_l22_l23_l28-supply: true
+ vdd_l1_l2_l4_l5-supply: true
+ vdd_l25-supply: true
+ vdd_l3_l24_l26-supply: true
+ vdd_l6_l7_l8_l9_l27-supply: true
+ vdd_lvs1-supply: true
+ patternProperties:
+ "^vdd_s[1-5]-supply$": true
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,pm8841-regulators
+ then:
+ patternProperties:
+ "^vdd_s[1-8]-supply$": true
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,pm8916-regulators
+ then:
+ properties:
+ vdd_l1_l3-supply: true
+ vdd_l4_l5_l6-supply: true
+ vdd_l8_l11_l14_l15_l16-supply: true
+ vdd_l9_l10_l12_l13_l17_l18-supply: true
+ patternProperties:
+ "^vdd_l[27]-supply$": true
+ "^vdd_s[1-4]-supply$": true
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,pm8941-regulators
+ then:
+ properties:
+ interrupts:
+ items:
+ - description: Over-current protection interrupt for 5V S1
+ - description: Over-current protection interrupt for 5V S2
+ interrupt-names:
+ items:
+ - const: ocp-5vs1
+ - const: ocp-5vs2
+ vdd_l13_l20_l23_l24-supply: true
+ vdd_l1_l3-supply: true
+ vdd_l21-supply: true
+ vdd_l2_lvs_1_2_3-supply: true
+ vdd_l4_l11-supply: true
+ vdd_l5_l7-supply: true
+ vdd_l6_l12_l14_l15-supply: true
+ vdd_l8_l16_l18_19-supply: true
+ vdd_l9_l10_l17_l22-supply: true
+ vin_5vs-supply: true
+ patternProperties:
+ "^vdd_s[1-3]-supply$": true
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,pm8950-regulators
+ then:
+ properties:
+ vdd_l1_l19-supply: true
+ vdd_l20-supply: true
+ vdd_l21-supply: true
+ vdd_l2_l23-supply: true
+ vdd_l3-supply: true
+ vdd_l4_l5_l6_l7_l16-supply: true
+ vdd_l8_l11_l12_l17_l22-supply: true
+ vdd_l9_l10_l13_l14_l15_l18-supply: true
+ patternProperties:
+ "^vdd_s[1-6]-supply$": true
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,pm8994-regulators
+ then:
+ properties:
+ vdd_l1-supply: true
+ vdd_l13_l19_l23_l24-supply: true
+ vdd_l14_l15-supply: true
+ vdd_l17_l29-supply: true
+ vdd_l20_l21-supply: true
+ vdd_l25-supply: true
+ vdd_l2_l26_l28-supply: true
+ vdd_l3_l11-supply: true
+ vdd_l4_l27_l31-supply: true
+ vdd_l5_l7-supply: true
+ vdd_l6_l12_l32-supply: true
+ vdd_l8_l16_l30-supply: true
+ vdd_l9_l10_l18_l22-supply: true
+ vdd_lvs_1_2-supply: true
+ patternProperties:
+ "^vdd_s[1-9][0-2]?-supply$": true
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,pmi8994-regulators
+ then:
+ properties:
+ vdd_l1-supply: true
+ patternProperties:
+ "^vdd_s[1-3]-supply$": true
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,pms405-regulators
+ then:
+ properties:
+ vdd_s3-supply: true
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ regulators {
+ compatible = "qcom,pm8941-regulators";
+ vdd_l1_l3-supply = <&s1>;
+
+ s1: s1 {
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1400000>;
+ };
+
+ l1: l1 {
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1300000>;
+ };
+ };
+...
projects / platform / kernel / linux-rpi.git / commitdiff