This uses trigger-sources documented in commit
80dc6e1cd85fc ("dt-bindings:
leds: document new trigger-sources property") to specify USB ports. Such an
information can be used by operating system to setup LEDs behavior.
I updated dts files for 7 devices I own and I was able to test.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
usb {
label = "bcm53xx:blue:usb";
gpios = <&hc595 0 GPIO_ACTIVE_HIGH>;
+ trigger-sources = <&ohci_port1>, <&ehci_port1>,
+ <&xhci_port1>, <&ohci_port2>,
+ <&ehci_port2>;
+ linux,default-trigger = "usbport";
};
power0 {
usb {
label = "bcm53xx:blue:usb";
gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&ohci_port1>, <&ehci_port1>,
+ <&xhci_port1>;
+ linux,default-trigger = "usbport";
};
wireless {
usb2 {
label = "bcm53xx:white:usb2";
gpios = <&chipcommon 3 GPIO_ACTIVE_HIGH>;
+ trigger-sources = <&ohci_port2>, <&ehci_port2>;
+ linux,default-trigger = "usbport";
};
usb3-white {
label = "bcm53xx:white:usb3";
gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
+ trigger-sources = <&xhci_port1>;
+ linux,default-trigger = "usbport";
};
usb3-green {
label = "bcm53xx:green:usb3";
gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
+ trigger-sources = <&ohci_port1>, <&ehci_port1>;
+ linux,default-trigger = "usbport";
};
wps {
usb2-port1 {
label = "bcm53xx:green:usb2-port1";
gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>;
+ trigger-sources = <&ohci_port1>, <&ehci_port1>;
+ linux,default-trigger = "usbport";
};
power {
usb2-port2 {
label = "bcm53xx:green:usb2-port2";
gpios = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
+ trigger-sources = <&ohci_port2>, <&ehci_port2>;
+ linux,default-trigger = "usbport";
};
};
usb3 {
label = "bcm53xx:blue:usb3";
gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
+ trigger-sources = <&ohci_port1>, <&ehci_port1>,
+ <&xhci_port1>;
+ linux,default-trigger = "usbport";
};
usb2 {
label = "bcm53xx:blue:usb2";
gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
+ trigger-sources = <&ohci_port2>, <&ehci_port2>;
+ linux,default-trigger = "usbport";
};
wan-blue {
usb3-white {
label = "bcm53xx:white:usb3";
gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&ohci_port1>, <&ehci_port1>,
+ <&xhci_port1>;
+ linux,default-trigger = "usbport";
};
2ghz {
usb3 {
label = "bcm53xx:green:usb3";
gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&ohci_port1>, <&ehci_port1>,
+ <&xhci_port1>;
+ linux,default-trigger = "usbport";
};
status {