Input: atkbd - fix HANGEUL/HANJA keys
authorDmitry Torokhov <dtor_core@ameritech.net>
Mon, 26 Jun 2006 05:52:34 +0000 (01:52 -0400)
committerDmitry Torokhov <dtor_core@ameritech.net>
Mon, 26 Jun 2006 05:52:34 +0000 (01:52 -0400)
Make atkbd report HANGEUL/HANJA keys by default and use correct scan
codes for these keys (they were swapped). Also make sure their scancodes
reported as EV_MSC/MSC_SCAN events.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
drivers/char/keyboard.c
drivers/input/keyboard/atkbd.c

index d82368b..6cb85dc 100644 (file)
@@ -1075,10 +1075,12 @@ static int emulate_raw(struct vc_data *vc, unsigned int keycode,
                        put_queue(vc, 0x45 | up_flag);
                        return 0;
                case KEY_HANGEUL:
-                       if (!up_flag) put_queue(vc, 0xf1);
+                       if (!up_flag)
+                               put_queue(vc, 0xf2);
                        return 0;
                case KEY_HANJA:
-                       if (!up_flag) put_queue(vc, 0xf2);
+                       if (!up_flag)
+                               put_queue(vc, 0xf1);
                        return 0;
        }
 
index 1bf61f0..ffde8f8 100644 (file)
@@ -55,7 +55,7 @@ static int atkbd_softraw = 1;
 module_param_named(softraw, atkbd_softraw, bool, 0);
 MODULE_PARM_DESC(softraw, "Use software generated rawmode");
 
-static int atkbd_scroll = 0;
+static int atkbd_scroll;
 module_param_named(scroll, atkbd_scroll, bool, 0);
 MODULE_PARM_DESC(scroll, "Enable scroll-wheel on MS Office and similar keyboards");
 
@@ -150,8 +150,8 @@ static unsigned char atkbd_unxlate_table[128] = {
 #define ATKBD_RET_EMUL0                0xe0
 #define ATKBD_RET_EMUL1                0xe1
 #define ATKBD_RET_RELEASE      0xf0
-#define ATKBD_RET_HANGEUL      0xf1
-#define ATKBD_RET_HANJA                0xf2
+#define ATKBD_RET_HANJA                0xf1
+#define ATKBD_RET_HANGEUL      0xf2
 #define ATKBD_RET_ERR          0xff
 
 #define ATKBD_KEY_UNKNOWN        0
@@ -170,6 +170,13 @@ static unsigned char atkbd_unxlate_table[128] = {
 #define ATKBD_LED_EVENT_BIT    0
 #define ATKBD_REP_EVENT_BIT    1
 
+#define ATKBD_XL_ERR           0x01
+#define ATKBD_XL_BAT           0x02
+#define ATKBD_XL_ACK           0x04
+#define ATKBD_XL_NAK           0x08
+#define ATKBD_XL_HANGEUL       0x10
+#define ATKBD_XL_HANJA         0x20
+
 static struct {
        unsigned char keycode;
        unsigned char set2;
@@ -211,8 +218,7 @@ struct atkbd {
        unsigned char emul;
        unsigned char resend;
        unsigned char release;
-       unsigned char bat_xl;
-       unsigned char err_xl;
+       unsigned long xl_bit;
        unsigned int last;
        unsigned long time;
 
@@ -245,17 +251,65 @@ ATKBD_DEFINE_ATTR(set);
 ATKBD_DEFINE_ATTR(softrepeat);
 ATKBD_DEFINE_ATTR(softraw);
 
+static const unsigned int xl_table[] = {
+       ATKBD_RET_BAT, ATKBD_RET_ERR, ATKBD_RET_ACK,
+       ATKBD_RET_NAK, ATKBD_RET_HANJA, ATKBD_RET_HANGEUL,
+};
 
-static void atkbd_report_key(struct input_dev *dev, struct pt_regs *regs, int code, int value)
+/*
+ * Checks if we should mangle the scancode to extract 'release' bit
+ * in translated mode.
+ */
+static int atkbd_need_xlate(unsigned long xl_bit, unsigned char code)
 {
-       input_regs(dev, regs);
-       if (value == 3) {
-               input_report_key(dev, code, 1);
-               input_sync(dev);
-               input_report_key(dev, code, 0);
-       } else
-               input_event(dev, EV_KEY, code, value);
-       input_sync(dev);
+       int i;
+
+       if (code == ATKBD_RET_EMUL0 || code == ATKBD_RET_EMUL1)
+               return 0;
+
+       for (i = 0; i < ARRAY_SIZE(xl_table); i++)
+               if (code == xl_table[i])
+                       return test_bit(i, &xl_bit);
+
+       return 1;
+}
+
+/*
+ * Calculates new value of xl_bit so the driver can distinguish
+ * between make/break pair of scancodes for select keys and PS/2
+ * protocol responses.
+ */
+static void atkbd_calculate_xl_bit(struct atkbd *atkbd, unsigned char code)
+{
+       int i;
+
+       for (i = 0; i < ARRAY_SIZE(xl_table); i++) {
+               if (!((code ^ xl_table[i]) & 0x7f)) {
+                       if (code & 0x80)
+                               __clear_bit(i, &atkbd->xl_bit);
+                       else
+                               __set_bit(i, &atkbd->xl_bit);
+                       break;
+               }
+       }
+}
+
+/*
+ * Encode the scancode, 0xe0 prefix, and high bit into a single integer,
+ * keeping kernel 2.4 compatibility for set 2
+ */
+static unsigned int atkbd_compat_scancode(struct atkbd *atkbd, unsigned int code)
+{
+       if (atkbd->set == 3) {
+               if (atkbd->emul == 1)
+                       code |= 0x100;
+        } else {
+               code = (code & 0x7f) | ((code & 0x80) << 1);
+               if (atkbd->emul == 1)
+                       code |= 0x80;
+       }
+
+       return code;
 }
 
 /*
@@ -267,9 +321,11 @@ static irqreturn_t atkbd_interrupt(struct serio *serio, unsigned char data,
                        unsigned int flags, struct pt_regs *regs)
 {
        struct atkbd *atkbd = serio_get_drvdata(serio);
+       struct input_dev *dev = atkbd->dev;
        unsigned int code = data;
-       int scroll = 0, hscroll = 0, click = -1;
+       int scroll = 0, hscroll = 0, click = -1, add_release_event = 0;
        int value;
+       unsigned char keycode;
 
 #ifdef ATKBD_DEBUG
        printk(KERN_DEBUG "atkbd.c: Received %02x flags %02x\n", data, flags);
@@ -298,25 +354,17 @@ static irqreturn_t atkbd_interrupt(struct serio *serio, unsigned char data,
        if (!atkbd->enabled)
                goto out;
 
-       input_event(atkbd->dev, EV_MSC, MSC_RAW, code);
+       input_event(dev, EV_MSC, MSC_RAW, code);
 
        if (atkbd->translated) {
 
-               if (atkbd->emul ||
-                   (code != ATKBD_RET_EMUL0 && code != ATKBD_RET_EMUL1 &&
-                    code != ATKBD_RET_HANGEUL && code != ATKBD_RET_HANJA &&
-                    (code != ATKBD_RET_ERR || atkbd->err_xl) &&
-                    (code != ATKBD_RET_BAT || atkbd->bat_xl))) {
+               if (atkbd->emul || atkbd_need_xlate(atkbd->xl_bit, code)) {
                        atkbd->release = code >> 7;
                        code &= 0x7f;
                }
 
-               if (!atkbd->emul) {
-                    if ((code & 0x7f) == (ATKBD_RET_BAT & 0x7f))
-                       atkbd->bat_xl = !(data >> 7);
-                    if ((code & 0x7f) == (ATKBD_RET_ERR & 0x7f))
-                       atkbd->err_xl = !(data >> 7);
-               }
+               if (!atkbd->emul)
+                       atkbd_calculate_xl_bit(atkbd, data);
        }
 
        switch (code) {
@@ -333,47 +381,48 @@ static irqreturn_t atkbd_interrupt(struct serio *serio, unsigned char data,
                case ATKBD_RET_RELEASE:
                        atkbd->release = 1;
                        goto out;
-               case ATKBD_RET_HANGEUL:
-                       atkbd_report_key(atkbd->dev, regs, KEY_HANGEUL, 3);
+               case ATKBD_RET_ACK:
+               case ATKBD_RET_NAK:
+                       printk(KERN_WARNING "atkbd.c: Spurious %s on %s. "
+                              "Some program might be trying access hardware directly.\n",
+                              data == ATKBD_RET_ACK ? "ACK" : "NAK", serio->phys);
                        goto out;
+               case ATKBD_RET_HANGEUL:
                case ATKBD_RET_HANJA:
-                       atkbd_report_key(atkbd->dev, regs, KEY_HANJA, 3);
-                       goto out;
+                       /*
+                        * These keys do not report release and thus need to be
+                        * flagged properly
+                        */
+                       add_release_event = 1;
+                       break;
                case ATKBD_RET_ERR:
                        printk(KERN_DEBUG "atkbd.c: Keyboard on %s reports too many keys pressed.\n", serio->phys);
                        goto out;
        }
 
-       if (atkbd->set != 3)
-               code = (code & 0x7f) | ((code & 0x80) << 1);
-       if (atkbd->emul) {
-               if (--atkbd->emul)
-                       goto out;
-               code |= (atkbd->set != 3) ? 0x80 : 0x100;
-       }
+       code = atkbd_compat_scancode(atkbd, code);
+
+       if (atkbd->emul && --atkbd->emul)
+               goto out;
+
+       keycode = atkbd->keycode[code];
 
-       if (atkbd->keycode[code] != ATKBD_KEY_NULL)
-               input_event(atkbd->dev, EV_MSC, MSC_SCAN, code);
+       if (keycode != ATKBD_KEY_NULL)
+               input_event(dev, EV_MSC, MSC_SCAN, code);
 
-       switch (atkbd->keycode[code]) {
+       switch (keycode) {
                case ATKBD_KEY_NULL:
                        break;
                case ATKBD_KEY_UNKNOWN:
-                       if (data == ATKBD_RET_ACK || data == ATKBD_RET_NAK) {
-                               printk(KERN_WARNING "atkbd.c: Spurious %s on %s. Some program, "
-                                      "like XFree86, might be trying access hardware directly.\n",
-                                      data == ATKBD_RET_ACK ? "ACK" : "NAK", serio->phys);
-                       } else {
-                               printk(KERN_WARNING "atkbd.c: Unknown key %s "
-                                      "(%s set %d, code %#x on %s).\n",
-                                      atkbd->release ? "released" : "pressed",
-                                      atkbd->translated ? "translated" : "raw",
-                                      atkbd->set, code, serio->phys);
-                               printk(KERN_WARNING "atkbd.c: Use 'setkeycodes %s%02x <keycode>' "
-                                      "to make it known.\n",
-                                      code & 0x80 ? "e0" : "", code & 0x7f);
-                       }
-                       input_sync(atkbd->dev);
+                       printk(KERN_WARNING
+                              "atkbd.c: Unknown key %s (%s set %d, code %#x on %s).\n",
+                              atkbd->release ? "released" : "pressed",
+                              atkbd->translated ? "translated" : "raw",
+                              atkbd->set, code, serio->phys);
+                       printk(KERN_WARNING
+                              "atkbd.c: Use 'setkeycodes %s%02x <keycode>' to make it known.\n",
+                              code & 0x80 ? "e0" : "", code & 0x7f);
+                       input_sync(dev);
                        break;
                case ATKBD_SCR_1:
                        scroll = 1 - atkbd->release * 2;
@@ -397,33 +446,35 @@ static irqreturn_t atkbd_interrupt(struct serio *serio, unsigned char data,
                        hscroll = 1;
                        break;
                default:
-                       value = atkbd->release ? 0 :
-                               (1 + (!atkbd->softrepeat && test_bit(atkbd->keycode[code], atkbd->dev->key)));
-
-                       switch (value) {        /* Workaround Toshiba laptop multiple keypress */
-                               case 0:
-                                       atkbd->last = 0;
-                                       break;
-                               case 1:
-                                       atkbd->last = code;
-                                       atkbd->time = jiffies + msecs_to_jiffies(atkbd->dev->rep[REP_DELAY]) / 2;
-                                       break;
-                               case 2:
-                                       if (!time_after(jiffies, atkbd->time) && atkbd->last == code)
-                                               value = 1;
-                                       break;
+                       if (atkbd->release) {
+                               value = 0;
+                               atkbd->last = 0;
+                       } else if (!atkbd->softrepeat && test_bit(keycode, dev->key)) {
+                               /* Workaround Toshiba laptop multiple keypress */
+                               value = time_before(jiffies, atkbd->time) && atkbd->last == code ? 1 : 2;
+                       } else {
+                               value = 1;
+                               atkbd->last = code;
+                               atkbd->time = jiffies + msecs_to_jiffies(dev->rep[REP_DELAY]) / 2;
                        }
 
-                       atkbd_report_key(atkbd->dev, regs, atkbd->keycode[code], value);
+                       input_regs(dev, regs);
+                       input_report_key(dev, keycode, value);
+                       input_sync(dev);
+
+                       if (value && add_release_event) {
+                               input_report_key(dev, keycode, 0);
+                               input_sync(dev);
+                       }
        }
 
        if (atkbd->scroll) {
-               input_regs(atkbd->dev, regs);
+               input_regs(dev, regs);
                if (click != -1)
-                       input_report_key(atkbd->dev, BTN_MIDDLE, click);
-               input_report_rel(atkbd->dev, REL_WHEEL, scroll);
-               input_report_rel(atkbd->dev, REL_HWHEEL, hscroll);
-               input_sync(atkbd->dev);
+                       input_report_key(dev, BTN_MIDDLE, click);
+               input_report_rel(dev, REL_WHEEL, scroll);
+               input_report_rel(dev, REL_HWHEEL, hscroll);
+               input_sync(dev);
        }
 
        atkbd->release = 0;
@@ -764,6 +815,9 @@ static void atkbd_set_keycode_table(struct atkbd *atkbd)
                        for (i = 0; i < ARRAY_SIZE(atkbd_scroll_keys); i++)
                                atkbd->keycode[atkbd_scroll_keys[i].set2] = atkbd_scroll_keys[i].keycode;
        }
+
+       atkbd->keycode[atkbd_compat_scancode(atkbd, ATKBD_RET_HANGEUL)] = KEY_HANGUEL;
+       atkbd->keycode[atkbd_compat_scancode(atkbd, ATKBD_RET_HANJA)] = KEY_HANJA;
 }
 
 /*