return 1;
}
-static ssize_t dp_phy_test_pattern_debugfs_read(struct file *f, char __user *buf,
- size_t size, loff_t *pos)
-{
- /* TODO: create method to read PHY test pattern */
- return 1;
-}
-
+/* function description
+ *
+ * set PHY layer or Link layer test pattern
+ * PHY test pattern is used for PHY SI check.
+ * Link layer test will not affect PHY SI.
+ *
+ * Reset Test Pattern:
+ * 0 = DP_TEST_PATTERN_VIDEO_MODE
+ *
+ * PHY test pattern supported:
+ * 1 = DP_TEST_PATTERN_D102
+ * 2 = DP_TEST_PATTERN_SYMBOL_ERROR
+ * 3 = DP_TEST_PATTERN_PRBS7
+ * 4 = DP_TEST_PATTERN_80BIT_CUSTOM
+ * 5 = DP_TEST_PATTERN_CP2520_1
+ * 6 = DP_TEST_PATTERN_CP2520_2 = DP_TEST_PATTERN_HBR2_COMPLIANCE_EYE
+ * 7 = DP_TEST_PATTERN_CP2520_3
+ *
+ * DP PHY Link Training Patterns
+ * 8 = DP_TEST_PATTERN_TRAINING_PATTERN1
+ * 9 = DP_TEST_PATTERN_TRAINING_PATTERN2
+ * a = DP_TEST_PATTERN_TRAINING_PATTERN3
+ * b = DP_TEST_PATTERN_TRAINING_PATTERN4
+ *
+ * DP Link Layer Test pattern
+ * c = DP_TEST_PATTERN_COLOR_SQUARES
+ * d = DP_TEST_PATTERN_COLOR_SQUARES_CEA
+ * e = DP_TEST_PATTERN_VERTICAL_BARS
+ * f = DP_TEST_PATTERN_HORIZONTAL_BARS
+ * 10= DP_TEST_PATTERN_COLOR_RAMP
+ *
+ * debugfs phy_test_pattern is located at /syskernel/debug/dri/0/DP-x
+ *
+ * --- set test pattern
+ * echo <test pattern #> > test_pattern
+ *
+ * If test pattern # is not supported, NO HW programming will be done.
+ * for DP_TEST_PATTERN_80BIT_CUSTOM, it needs extra 10 bytes of data
+ * for the user pattern. input 10 bytes data are separated by space
+ *
+ * echo 0x4 0x11 0x22 0x33 0x44 0x55 0x66 0x77 0x88 0x99 0xaa > test_pattern
+ *
+ * --- reset test pattern
+ * echo 0 > test_pattern
+ *
+ * --- HPD detection is disabled when set PHY test pattern
+ *
+ * when PHY test pattern (pattern # within [1,7]) is set, HPD pin of HW ASIC
+ * is disable. User could unplug DP display from DP connected and plug scope to
+ * check test pattern PHY SI.
+ * If there is need unplug scope and plug DP display back, do steps below:
+ * echo 0 > phy_test_pattern
+ * unplug scope
+ * plug DP display.
+ *
+ * "echo 0 > phy_test_pattern" will re-enable HPD pin again so that video sw
+ * driver could detect "unplug scope" and "plug DP display"
+ */
static ssize_t dp_phy_test_pattern_debugfs_write(struct file *f, const char __user *buf,
size_t size, loff_t *pos)
{
- /* TODO: create method to write PHY test pattern */
- return 1;
+ struct amdgpu_dm_connector *connector = file_inode(f)->i_private;
+ struct dc_link *link = connector->dc_link;
+ char *wr_buf = NULL;
+ char *wr_buf_ptr = NULL;
+ uint32_t wr_buf_size = 100;
+ int r;
+ int bytes_from_user;
+ char *sub_str;
+ uint8_t param_index = 0;
+ long param[11];
+ const char delimiter[3] = {' ', '\n', '\0'};
+ enum dp_test_pattern test_pattern = DP_TEST_PATTERN_UNSUPPORTED;
+ bool disable_hpd = false;
+ bool valid_test_pattern = false;
+ uint8_t custom_pattern[10] = {0};
+ struct dc_link_settings prefer_link_settings = {LANE_COUNT_UNKNOWN,
+ LINK_RATE_UNKNOWN, LINK_SPREAD_DISABLED};
+ struct dc_link_settings cur_link_settings = {LANE_COUNT_UNKNOWN,
+ LINK_RATE_UNKNOWN, LINK_SPREAD_DISABLED};
+ struct link_training_settings link_training_settings;
+ int i;
+
+ if (size == 0)
+ return 0;
+
+ wr_buf = kcalloc(wr_buf_size, sizeof(char), GFP_KERNEL);
+ if (!wr_buf)
+ return 0;
+ wr_buf_ptr = wr_buf;
+
+ r = copy_from_user(wr_buf_ptr, buf, wr_buf_size);
+
+ /* r is bytes not be copied */
+ if (r >= wr_buf_size) {
+ kfree(wr_buf);
+ DRM_DEBUG_DRIVER("user data not be read\n");
+ return 0;
+ }
+
+ bytes_from_user = wr_buf_size - r;
+
+ while (isspace(*wr_buf_ptr))
+ wr_buf_ptr++;
+
+ while ((*wr_buf_ptr != '\0') && (param_index < 1)) {
+ sub_str = strsep(&wr_buf_ptr, delimiter);
+ r = kstrtol(sub_str, 16, ¶m[param_index]);
+
+ if (r)
+ DRM_DEBUG_DRIVER("string to int convert error code: %d\n", r);
+
+ param_index++;
+ while (isspace(*wr_buf_ptr))
+ wr_buf_ptr++;
+
+ /* DP_TEST_PATTERN_80BIT_CUSTOM need extra 80 bits
+ * whci are 10 bytes separte by space
+ */
+ if (param[0] != 0x4)
+ break;
+ }
+
+ test_pattern = param[0];
+
+ switch (test_pattern) {
+ case DP_TEST_PATTERN_VIDEO_MODE:
+ case DP_TEST_PATTERN_COLOR_SQUARES:
+ case DP_TEST_PATTERN_COLOR_SQUARES_CEA:
+ case DP_TEST_PATTERN_VERTICAL_BARS:
+ case DP_TEST_PATTERN_HORIZONTAL_BARS:
+ case DP_TEST_PATTERN_COLOR_RAMP:
+ valid_test_pattern = true;
+ break;
+
+ case DP_TEST_PATTERN_D102:
+ case DP_TEST_PATTERN_SYMBOL_ERROR:
+ case DP_TEST_PATTERN_PRBS7:
+ case DP_TEST_PATTERN_80BIT_CUSTOM:
+ case DP_TEST_PATTERN_HBR2_COMPLIANCE_EYE:
+ case DP_TEST_PATTERN_TRAINING_PATTERN4:
+ disable_hpd = true;
+ valid_test_pattern = true;
+ break;
+
+ default:
+ valid_test_pattern = false;
+ test_pattern = DP_TEST_PATTERN_UNSUPPORTED;
+ break;
+ }
+
+ if (!valid_test_pattern) {
+ kfree(wr_buf);
+ DRM_DEBUG_DRIVER("Invalid Test Pattern Parameters\n");
+ return bytes_from_user;
+ }
+
+ if (test_pattern == DP_TEST_PATTERN_80BIT_CUSTOM) {
+ for (i = 0; i < 10; i++)
+ custom_pattern[i] = (uint8_t) param[i + 1];
+ }
+
+ /* Usage: set DP physical test pattern using debugfs with normal DP
+ * panel. Then plug out DP panel and connect a scope to measure
+ * For normal video mode and test pattern generated from CRCT,
+ * they are visibile to user. So do not disable HPD.
+ * Video Mode is also set to clear the test pattern, so enable HPD
+ * because it might have been disabled after a test pattern was set.
+ * AUX depends on HPD * sequence dependent, do not move!
+ */
+ if (!disable_hpd)
+ dc_link_enable_hpd(link);
+
+ prefer_link_settings.lane_count = link->verified_link_cap.lane_count;
+ prefer_link_settings.link_rate = link->verified_link_cap.link_rate;
+ prefer_link_settings.link_spread = link->verified_link_cap.link_spread;
+
+ cur_link_settings.lane_count = link->cur_link_settings.lane_count;
+ cur_link_settings.link_rate = link->cur_link_settings.link_rate;
+ cur_link_settings.link_spread = link->cur_link_settings.link_spread;
+
+ link_training_settings.link_settings = cur_link_settings;
+
+
+ if (test_pattern != DP_TEST_PATTERN_VIDEO_MODE) {
+ if (prefer_link_settings.lane_count != LANE_COUNT_UNKNOWN &&
+ prefer_link_settings.link_rate != LINK_RATE_UNKNOWN &&
+ (prefer_link_settings.lane_count != cur_link_settings.lane_count ||
+ prefer_link_settings.link_rate != cur_link_settings.link_rate))
+ link_training_settings.link_settings = prefer_link_settings;
+ }
+
+ for (i = 0; i < (unsigned int)(link_training_settings.link_settings.lane_count); i++)
+ link_training_settings.lane_settings[i] = link->cur_lane_setting;
+
+ dc_link_set_test_pattern(
+ link,
+ test_pattern,
+ &link_training_settings,
+ custom_pattern,
+ 10);
+
+ /* Usage: Set DP physical test pattern using AMDDP with normal DP panel
+ * Then plug out DP panel and connect a scope to measure DP PHY signal.
+ * Need disable interrupt to avoid SW driver disable DP output. This is
+ * done after the test pattern is set.
+ */
+ if (valid_test_pattern && disable_hpd)
+ dc_link_disable_hpd(link);
+
+ kfree(wr_buf);
+
+ return bytes_from_user;
}
static const struct file_operations dp_link_settings_debugfs_fops = {
static const struct file_operations dp_phy_test_pattern_fops = {
.owner = THIS_MODULE,
- .read = dp_phy_test_pattern_debugfs_read,
.write = dp_phy_test_pattern_debugfs_write,
.llseek = default_llseek
};
{"link_settings", &dp_link_settings_debugfs_fops},
{"voltage_swing", &dp_voltage_swing_fops},
{"pre_emphasis", &dp_pre_emphasis_fops},
- {"phy_test_pattern", &dp_phy_test_pattern_fops}
+ {"test_pattern", &dp_phy_test_pattern_fops}
};
int connector_debugfs_init(struct amdgpu_dm_connector *connector)
projects / platform / kernel / linux-rpi.git / commitdiff