+++ /dev/null
-Qualcomm Camera Control Interface (CCI) I2C controller
-
-PROPERTIES:
-
-- compatible:
- Usage: required
- Value type: <string>
- Definition: must be one of:
- "qcom,msm8916-cci"
- "qcom,msm8974-cci"
- "qcom,msm8996-cci"
- "qcom,sdm845-cci"
- "qcom,sm8250-cci"
- "qcom,sm8450-cci"
-
-- reg
- Usage: required
- Value type: <prop-encoded-array>
- Definition: base address CCI I2C controller and length of memory
- mapped region.
-
-- interrupts:
- Usage: required
- Value type: <prop-encoded-array>
- Definition: specifies the CCI I2C interrupt. The format of the
- specifier is defined by the binding document describing
- the node's interrupt parent.
-
-- clocks:
- Usage: required
- Value type: <prop-encoded-array>
- Definition: a list of phandle, should contain an entry for each
- entries in clock-names.
-
-- clock-names
- Usage: required
- Value type: <string>
- Definition: a list of clock names, must include "cci" clock.
-
-- power-domains
- Usage: required for "qcom,msm8996-cci"
- Value type: <prop-encoded-array>
- Definition:
-
-SUBNODES:
-
-The CCI provides I2C masters for one (msm8916) or two i2c busses (msm8974,
-msm8996, sdm845, sm8250 and sm8450), described as subdevices named "i2c-bus@0"
-and "i2c-bus@1".
-
-PROPERTIES:
-
-- reg:
- Usage: required
- Value type: <u32>
- Definition: Index of the CCI bus/master
-
-- clock-frequency:
- Usage: optional
- Value type: <u32>
- Definition: Desired I2C bus clock frequency in Hz, defaults to 100
- kHz if omitted.
-
-Example:
-
- cci@a0c000 {
- compatible = "qcom,msm8996-cci";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0xa0c000 0x1000>;
- interrupts = <GIC_SPI 295 IRQ_TYPE_EDGE_RISING>;
- clocks = <&mmcc MMSS_MMAGIC_AHB_CLK>,
- <&mmcc CAMSS_TOP_AHB_CLK>,
- <&mmcc CAMSS_CCI_AHB_CLK>,
- <&mmcc CAMSS_CCI_CLK>,
- <&mmcc CAMSS_AHB_CLK>;
- clock-names = "mmss_mmagic_ahb",
- "camss_top_ahb",
- "cci_ahb",
- "cci",
- "camss_ahb";
-
- i2c-bus@0 {
- reg = <0>;
- clock-frequency = <400000>;
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- i2c-bus@1 {
- reg = <1>;
- clock-frequency = <400000>;
- #address-cells = <1>;
- #size-cells = <0>;
- };
- };
--- /dev/null
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/qcom,i2c-cci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Camera Control Interface (CCI) I2C controller
+
+maintainers:
+ - Loic Poulain <loic.poulain@linaro.org>
+ - Robert Foss <robert.foss@linaro.org>
+
+properties:
+ compatible:
+ enum:
+ - qcom,msm8916-cci
+ - qcom,msm8974-cci
+ - qcom,msm8996-cci
+ - qcom,sdm845-cci
+ - qcom,sm8250-cci
+ - qcom,sm8450-cci
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+ clocks:
+ minItems: 4
+ maxItems: 6
+
+ clock-names:
+ minItems: 4
+ maxItems: 6
+
+ interrupts:
+ maxItems: 1
+
+ power-domains:
+ maxItems: 1
+
+ reg:
+ maxItems: 1
+
+patternProperties:
+ "^i2c-bus@[01]$":
+ $ref: /schemas/i2c/i2c-controller.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ reg:
+ maxItems: 1
+
+ clock-frequency:
+ default: 100000
+
+required:
+ - compatible
+ - clock-names
+ - clocks
+ - interrupts
+ - reg
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,msm8996-cci
+ then:
+ required:
+ - power-domains
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,msm8916-cci
+ then:
+ properties:
+ i2c-bus@1: false
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,msm8916-cci
+ - qcom,msm8996-cci
+ then:
+ properties:
+ clocks:
+ maxItems: 4
+ clock-names:
+ items:
+ - const: camss_top_ahb
+ - const: cci_ahb
+ - const: cci
+ - const: camss_ahb
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,sdm845-cci
+ then:
+ properties:
+ clocks:
+ minItems: 6
+ clock-names:
+ items:
+ - const: camnoc_axi
+ - const: soc_ahb
+ - const: slow_ahb_src
+ - const: cpas_ahb
+ - const: cci
+ - const: cci_src
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,sm8250-cci
+ then:
+ properties:
+ clocks:
+ minItems: 5
+ maxItems: 5
+ clock-names:
+ items:
+ - const: camnoc_axi
+ - const: slow_ahb_src
+ - const: cpas_ahb
+ - const: cci
+ - const: cci_src
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,camcc-sdm845.h>
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ cci@ac4a000 {
+ reg = <0x0ac4a000 0x4000>;
+ compatible = "qcom,sdm845-cci";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ interrupts = <GIC_SPI 460 IRQ_TYPE_EDGE_RISING>;
+ power-domains = <&clock_camcc TITAN_TOP_GDSC>;
+
+ clocks = <&clock_camcc CAM_CC_CAMNOC_AXI_CLK>,
+ <&clock_camcc CAM_CC_SOC_AHB_CLK>,
+ <&clock_camcc CAM_CC_SLOW_AHB_CLK_SRC>,
+ <&clock_camcc CAM_CC_CPAS_AHB_CLK>,
+ <&clock_camcc CAM_CC_CCI_CLK>,
+ <&clock_camcc CAM_CC_CCI_CLK_SRC>;
+ clock-names = "camnoc_axi",
+ "soc_ahb",
+ "slow_ahb_src",
+ "cpas_ahb",
+ "cci",
+ "cci_src";
+
+ assigned-clocks = <&clock_camcc CAM_CC_CAMNOC_AXI_CLK>,
+ <&clock_camcc CAM_CC_CCI_CLK>;
+ assigned-clock-rates = <80000000>,
+ <37500000>;
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&cci0_default &cci1_default>;
+ pinctrl-1 = <&cci0_sleep &cci1_sleep>;
+
+ i2c-bus@0 {
+ reg = <0>;
+ clock-frequency = <1000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ camera@10 {
+ compatible = "ovti,ov8856";
+ reg = <0x10>;
+
+ reset-gpios = <&tlmm 9 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&cam0_default>;
+
+ clocks = <&clock_camcc CAM_CC_MCLK0_CLK>;
+ clock-names = "xvclk";
+ clock-frequency = <19200000>;
+
+ dovdd-supply = <&vreg_lvs1a_1p8>;
+ avdd-supply = <&cam0_avdd_2v8>;
+ dvdd-supply = <&cam0_dvdd_1v2>;
+
+ port {
+ ov8856_ep: endpoint {
+ link-frequencies = /bits/ 64 <360000000 180000000>;
+ data-lanes = <1 2 3 4>;
+ remote-endpoint = <&csiphy0_ep>;
+ };
+ };
+ };
+ };
+
+ cci_i2c1: i2c-bus@1 {
+ reg = <1>;
+ clock-frequency = <1000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ camera@60 {
+ compatible = "ovti,ov7251";
+ reg = <0x60>;
+
+ enable-gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&cam3_default>;
+
+ clocks = <&clock_camcc CAM_CC_MCLK3_CLK>;
+ clock-names = "xclk";
+ clock-frequency = <24000000>;
+
+ vdddo-supply = <&vreg_lvs1a_1p8>;
+ vdda-supply = <&cam3_avdd_2v8>;
+
+ port {
+ ov7251_ep: endpoint {
+ data-lanes = <0 1>;
+ remote-endpoint = <&csiphy3_ep>;
+ };
+ };
+ };
+ };
+ };
projects / platform / kernel / linux-starfive.git / commitdiff