};
/*
- * Both r8169 chips on the n2100 exhibit PCI parity problems. Set
- * the ->broken_parity_status flag for both ports so that the r8169
- * driver knows it should ignore error interrupts.
+ * Both r8169 chips on the n2100 exhibit PCI parity problems. Turn
+ * off parity reporting for both ports so we don't get error interrupts
+ * for them.
*/
static void n2100_fixup_r8169(struct pci_dev *dev)
{
if (dev->bus->number == 0 &&
(dev->devfn == PCI_DEVFN(1, 0) ||
dev->devfn == PCI_DEVFN(2, 0)))
- dev->broken_parity_status = 1;
+ pci_disable_parity(dev);
}
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_REALTEK, PCI_ANY_ID, n2100_fixup_r8169);
if (net_ratelimit())
netdev_err(dev, "PCI error (cmd = 0x%04x, status_errs = 0x%04x)\n",
pci_cmd, pci_status_errs);
- /*
- * The recovery sequence below admits a very elaborated explanation:
- * - it seems to work;
- * - I did not see what else could be done;
- * - it makes iop3xx happy.
- *
- * Feel free to adjust to your needs.
- */
- if (pdev->broken_parity_status)
- pci_cmd &= ~PCI_COMMAND_PARITY;
- else
- pci_cmd |= PCI_COMMAND_SERR | PCI_COMMAND_PARITY;
-
- pci_write_config_word(pdev, PCI_COMMAND, pci_cmd);
rtl_schedule_task(tp, RTL_FLAG_TASK_RESET_PENDING);
}