accel/ivpu/40xx: Fix missing VPUIP interrupts

Move sequence of masking and unmasking global interrupts from buttress
interrupt handler to generic one that handles both VPUIP and BTRS
interrupts.

Unmasking global interrupts will re-trigger MSI for any pending interrupts.
Lack of this sequence can randomly cause to miss any VPUIP interrupt that
comes after reading VPU_40XX_HOST_SS_ICB_STATUS_0 and before clearing
all active interrupt sources.

Fixes: 79cdc56c4a54 ("accel/ivpu: Add initial support for VPU 4")
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230925121137.872158-6-stanislaw.gruszka@linux.intel.com

diff --git a/drivers/accel/ivpu/ivpu_hw_40xx.c b/drivers/accel/ivpu/ivpu_hw_40xx.c
index 87b1085..8bdb59a 100644 (file)
--- a/drivers/accel/ivpu/ivpu_hw_40xx.c
+++ b/drivers/accel/ivpu/ivpu_hw_40xx.c
@@ -1059,9 +1059,6 @@ static irqreturn_t ivpu_hw_40xx_irqb_handler(struct ivpu_device *vdev, int irq)
        if (status == 0)
                return IRQ_NONE;
 
-       /* Disable global interrupt before handling local buttress interrupts */
-       REGB_WR32(VPU_40XX_BUTTRESS_GLOBAL_INT_MASK, 0x1);
-
        if (REG_TEST_FLD(VPU_40XX_BUTTRESS_INTERRUPT_STAT, FREQ_CHANGE, status))
                ivpu_dbg(vdev, IRQ, "FREQ_CHANGE");
 
@@ -1109,9 +1106,6 @@ static irqreturn_t ivpu_hw_40xx_irqb_handler(struct ivpu_device *vdev, int irq)
        /* This must be done after interrupts are cleared at the source. */
        REGB_WR32(VPU_40XX_BUTTRESS_INTERRUPT_STAT, status);
 
-       /* Re-enable global interrupt */
-       REGB_WR32(VPU_40XX_BUTTRESS_GLOBAL_INT_MASK, 0x0);
-
        if (schedule_recovery)
                ivpu_pm_schedule_recovery(vdev);
 
@@ -1123,9 +1117,14 @@ static irqreturn_t ivpu_hw_40xx_irq_handler(int irq, void *ptr)
        struct ivpu_device *vdev = ptr;
        irqreturn_t ret = IRQ_NONE;
 
+       REGB_WR32(VPU_40XX_BUTTRESS_GLOBAL_INT_MASK, 0x1);
+
        ret |= ivpu_hw_40xx_irqv_handler(vdev, irq);
        ret |= ivpu_hw_40xx_irqb_handler(vdev, irq);
 
+       /* Re-enable global interrupts to re-trigger MSI for pending interrupts */
+       REGB_WR32(VPU_40XX_BUTTRESS_GLOBAL_INT_MASK, 0x0);
+
        if (ret & IRQ_WAKE_THREAD)
                return IRQ_WAKE_THREAD;