arm64: dts: qcom: pm8916: Sort nodes

Sort nodes by unit address so we have a consistent order in pm8916.dtsi.

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20200915071221.72895-14-stephan@gerhold.net
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

diff --git a/arch/arm64/boot/dts/qcom/pm8916.dtsi b/arch/arm64/boot/dts/qcom/pm8916.dtsi
index c7b22ac..f931cb0 100644 (file)
--- a/arch/arm64/boot/dts/qcom/pm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8916.dtsi
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 #include <dt-bindings/iio/qcom,spmi-vadc.h>
-#include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/spmi/spmi.h>
 
 &spmi_bus {
@@ -12,13 +12,6 @@
                #address-cells = <1>;
                #size-cells = <0>;
 
-               rtc@6000 {
-                       compatible = "qcom,pm8941-rtc";
-                       reg = <0x6000>;
-                       reg-names = "rtc", "alarm";
-                       interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
-               };
-
                pon@800 {
                        compatible = "qcom,pm8916-pon";
                        reg = <0x800>;
@@ -48,28 +41,6 @@
                        };
                };
 
-               pm8916_gpios: gpios@c000 {
-                       compatible = "qcom,pm8916-gpio";
-                       reg = <0xc000>;
-                       gpio-controller;
-                       #gpio-cells = <2>;
-                       interrupts = <0 0xc0 0 IRQ_TYPE_NONE>,
-                                    <0 0xc1 0 IRQ_TYPE_NONE>,
-                                    <0 0xc2 0 IRQ_TYPE_NONE>,
-                                    <0 0xc3 0 IRQ_TYPE_NONE>;
-               };
-
-               pm8916_mpps: mpps@a000 {
-                       compatible = "qcom,pm8916-mpp";
-                       reg = <0xa000>;
-                       gpio-controller;
-                       #gpio-cells = <2>;
-                       interrupts = <0 0xa0 0 IRQ_TYPE_NONE>,
-                                    <0 0xa1 0 IRQ_TYPE_NONE>,
-                                    <0 0xa2 0 IRQ_TYPE_NONE>,
-                                    <0 0xa3 0 IRQ_TYPE_NONE>;
-               };
-
                pm8916_temp: temp-alarm@2400 {
                        compatible = "qcom,spmi-temp-alarm";
                        reg = <0x2400>;
@@ -111,6 +82,35 @@
                                reg = <VADC_VDD_VADC>;
                        };
                };
+
+               rtc@6000 {
+                       compatible = "qcom,pm8941-rtc";
+                       reg = <0x6000>;
+                       reg-names = "rtc", "alarm";
+                       interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
+               };
+
+               pm8916_mpps: mpps@a000 {
+                       compatible = "qcom,pm8916-mpp";
+                       reg = <0xa000>;
+                       gpio-controller;
+                       #gpio-cells = <2>;
+                       interrupts = <0 0xa0 0 IRQ_TYPE_NONE>,
+                                    <0 0xa1 0 IRQ_TYPE_NONE>,
+                                    <0 0xa2 0 IRQ_TYPE_NONE>,
+                                    <0 0xa3 0 IRQ_TYPE_NONE>;
+               };
+
+               pm8916_gpios: gpios@c000 {
+                       compatible = "qcom,pm8916-gpio";
+                       reg = <0xc000>;
+                       gpio-controller;
+                       #gpio-cells = <2>;
+                       interrupts = <0 0xc0 0 IRQ_TYPE_NONE>,
+                                    <0 0xc1 0 IRQ_TYPE_NONE>,
+                                    <0 0xc2 0 IRQ_TYPE_NONE>,
+                                    <0 0xc3 0 IRQ_TYPE_NONE>;
+               };
        };
 
        pm8916_1: pmic@1 {