#include <asm/arch/time.h>
/*
- * The EP80219 and IQ31244 use the same machine ID. To find out
- * which of the two we're running on, we look at the processor ID.
+ * Until March of 2007 iq31244 platforms and ep80219 platforms shared the
+ * same machine id, and the processor type was used to select board type.
+ * However this assumption breaks for an iq80219 board which is an iop219
+ * processor on an iq31244 board. The force_ep80219 flag has been added
+ * for old boot loaders using the iq31244 machine id for an ep80219 platform.
*/
+static int force_ep80219;
+
static int is_80219(void)
{
extern int processor_id;
return !!((processor_id & 0xffffffe0) == 0x69052e20);
}
+static int is_ep80219(void)
+{
+ if (machine_is_ep80219() || force_ep80219)
+ return 1;
+ else
+ return 0;
+}
+
/*
* EP80219/IQ31244 timer tick configuration.
*/
static void __init iq31244_timer_init(void)
{
- if (is_80219()) {
+ if (is_ep80219()) {
/* 33.333 MHz crystal. */
iop_init_time(200000000);
} else {
static int __init iq31244_pci_init(void)
{
- if (machine_is_iq31244()) {
+ if (is_ep80219())
+ pci_common_init(&ep80219_pci);
+ else if (machine_is_iq31244()) {
if (is_80219()) {
- pci_common_init(&ep80219_pci);
- } else {
- pci_common_init(&iq31244_pci);
+ printk("note: iq31244 board type has been selected\n");
+ printk("note: to select ep80219 operation:\n");
+ printk("\t1/ specify \"force_ep80219\" on the kernel"
+ " command line\n");
+ printk("\t2/ update boot loader to pass"
+ " the ep80219 id: %d\n", MACH_TYPE_EP80219);
}
+ pci_common_init(&iq31244_pci);
}
return 0;
platform_device_register(&iq31244_flash_device);
platform_device_register(&iq31244_serial_device);
- if (is_80219())
+ if (is_ep80219())
pm_power_off = ep80219_power_off;
}
+static int __init force_ep80219_setup(char *str)
+{
+ force_ep80219 = 1;
+ return 1;
+}
+
+__setup("force_ep80219", force_ep80219_setup);
+
MACHINE_START(IQ31244, "Intel IQ31244")
/* Maintainer: Intel Corp. */
.phys_io = IQ31244_UART,
.timer = &iq31244_timer,
.init_machine = iq31244_init_machine,
MACHINE_END
+
+/* There should have been an ep80219 machine identifier from the beginning.
+ * Boot roms older than March 2007 do not know the ep80219 machine id. Pass
+ * "force_ep80219" on the kernel command line, otherwise iq31244 operation
+ * will be selected.
+ */
+MACHINE_START(EP80219, "Intel EP80219")
+ /* Maintainer: Intel Corp. */
+ .phys_io = IQ31244_UART,
+ .io_pg_offst = ((IQ31244_UART) >> 18) & 0xfffc,
+ .boot_params = 0xa0000100,
+ .map_io = iq31244_map_io,
+ .init_irq = iop32x_init_irq,
+ .timer = &iq31244_timer,
+ .init_machine = iq31244_init_machine,
+MACHINE_END