regulator: pca9450: add pca9450 pmic driver
authorRobin Gong <yibin.gong@nxp.com>
Fri, 3 Jul 2020 16:19:35 +0000 (00:19 +0800)
committerMark Brown <broonie@kernel.org>
Mon, 6 Jul 2020 14:23:33 +0000 (15:23 +0100)
Add NXP pca9450 pmic driver.

Signed-off-by: Robin Gong <yibin.gong@nxp.com>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Link: https://lore.kernel.org/r/1593793178-9737-2-git-send-email-yibin.gong@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
drivers/regulator/Kconfig
drivers/regulator/Makefile
drivers/regulator/pca9450-regulator.c [new file with mode: 0644]
include/linux/regulator/pca9450.h [new file with mode: 0644]

index 2c6a8c4bdf06f49c1c646ef6650414fcef56693d..8f9bef574af29816a54bd5a742ef94775045033b 100644 (file)
@@ -750,6 +750,14 @@ config REGULATOR_PBIAS
         This driver provides support for OMAP pbias modelled
         regulators.
 
+config REGULATOR_PCA9450
+       tristate "NXP PCA9450A/PCA9450B/PCA9450C regulator driver"
+       depends on I2C
+       select REGMAP_I2C
+       help
+         Say y here to support the NXP PCA9450A/PCA9450B/PCA9450C PMIC
+         regulator driver.
+
 config REGULATOR_PCAP
        tristate "Motorola PCAP2 regulator driver"
        depends on EZX_PCAP
index 85bc3ef0be1c79315bf05b539cddbfb2002bc8c1..6adfe769a47c973c39f6751fdbb13b5738cb75b1 100644 (file)
@@ -96,6 +96,7 @@ obj-$(CONFIG_REGULATOR_QCOM_SMD_RPM) += qcom_smd-regulator.o
 obj-$(CONFIG_REGULATOR_QCOM_SPMI) += qcom_spmi-regulator.o
 obj-$(CONFIG_REGULATOR_QCOM_USB_VBUS) += qcom_usb_vbus-regulator.o
 obj-$(CONFIG_REGULATOR_PALMAS) += palmas-regulator.o
+obj-$(CONFIG_REGULATOR_PCA9450) += pca9450-regulator.o
 obj-$(CONFIG_REGULATOR_PFUZE100) += pfuze100-regulator.o
 obj-$(CONFIG_REGULATOR_PV88060) += pv88060-regulator.o
 obj-$(CONFIG_REGULATOR_PV88080) += pv88080-regulator.o
diff --git a/drivers/regulator/pca9450-regulator.c b/drivers/regulator/pca9450-regulator.c
new file mode 100644 (file)
index 0000000..0225045
--- /dev/null
@@ -0,0 +1,843 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2020 NXP.
+ * NXP PCA9450 pmic driver
+ */
+
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/of_regulator.h>
+#include <linux/regulator/pca9450.h>
+
+struct pc9450_dvs_config {
+       unsigned int run_reg; /* dvs0 */
+       unsigned int run_mask;
+       unsigned int standby_reg; /* dvs1 */
+       unsigned int standby_mask;
+};
+
+struct pca9450_regulator_desc {
+       struct regulator_desc desc;
+       const struct pc9450_dvs_config dvs;
+};
+
+struct pca9450 {
+       struct device *dev;
+       struct regmap *regmap;
+       enum pca9450_chip_type type;
+       unsigned int rcnt;
+       int irq;
+};
+
+static const struct regmap_range pca9450_status_range = {
+       .range_min = PCA9450_REG_INT1,
+       .range_max = PCA9450_REG_PWRON_STAT,
+};
+
+static const struct regmap_access_table pca9450_volatile_regs = {
+       .yes_ranges = &pca9450_status_range,
+       .n_yes_ranges = 1,
+};
+
+static const struct regmap_config pca9450_regmap_config = {
+       .reg_bits = 8,
+       .val_bits = 8,
+       .volatile_table = &pca9450_volatile_regs,
+       .max_register = PCA9450_MAX_REGISTER - 1,
+       .cache_type = REGCACHE_RBTREE,
+};
+
+/*
+ * BUCK1/2/3
+ * BUCK1RAM[1:0] BUCK1 DVS ramp rate setting
+ * 00: 25mV/1usec
+ * 01: 25mV/2usec
+ * 10: 25mV/4usec
+ * 11: 25mV/8usec
+ */
+static int pca9450_dvs_set_ramp_delay(struct regulator_dev *rdev,
+                                     int ramp_delay)
+{
+       int id = rdev_get_id(rdev);
+       unsigned int ramp_value;
+
+       switch (ramp_delay) {
+       case 1 ... 3125:
+               ramp_value = BUCK1_RAMP_3P125MV;
+               break;
+       case 3126 ... 6250:
+               ramp_value = BUCK1_RAMP_6P25MV;
+               break;
+       case 6251 ... 12500:
+               ramp_value = BUCK1_RAMP_12P5MV;
+               break;
+       case 12501 ... 25000:
+               ramp_value = BUCK1_RAMP_25MV;
+               break;
+       default:
+               ramp_value = BUCK1_RAMP_25MV;
+       }
+
+       return regmap_update_bits(rdev->regmap, PCA9450_REG_BUCK1CTRL + id * 3,
+                                 BUCK1_RAMP_MASK, ramp_value << 6);
+}
+
+static struct regulator_ops pca9450_dvs_buck_regulator_ops = {
+       .enable = regulator_enable_regmap,
+       .disable = regulator_disable_regmap,
+       .is_enabled = regulator_is_enabled_regmap,
+       .list_voltage = regulator_list_voltage_linear_range,
+       .set_voltage_sel = regulator_set_voltage_sel_regmap,
+       .get_voltage_sel = regulator_get_voltage_sel_regmap,
+       .set_voltage_time_sel = regulator_set_voltage_time_sel,
+       .set_ramp_delay = pca9450_dvs_set_ramp_delay,
+};
+
+static struct regulator_ops pca9450_buck_regulator_ops = {
+       .enable = regulator_enable_regmap,
+       .disable = regulator_disable_regmap,
+       .is_enabled = regulator_is_enabled_regmap,
+       .list_voltage = regulator_list_voltage_linear_range,
+       .set_voltage_sel = regulator_set_voltage_sel_regmap,
+       .get_voltage_sel = regulator_get_voltage_sel_regmap,
+       .set_voltage_time_sel = regulator_set_voltage_time_sel,
+};
+
+static struct regulator_ops pca9450_ldo_regulator_ops = {
+       .enable = regulator_enable_regmap,
+       .disable = regulator_disable_regmap,
+       .is_enabled = regulator_is_enabled_regmap,
+       .list_voltage = regulator_list_voltage_linear_range,
+       .set_voltage_sel = regulator_set_voltage_sel_regmap,
+       .get_voltage_sel = regulator_get_voltage_sel_regmap,
+};
+
+/*
+ * BUCK1/2/3
+ * 0.60 to 2.1875V (12.5mV step)
+ */
+static const struct linear_range pca9450_dvs_buck_volts[] = {
+       REGULATOR_LINEAR_RANGE(600000,  0x00, 0x7F, 12500),
+};
+
+/*
+ * BUCK4/5/6
+ * 0.6V to 3.4V (25mV step)
+ */
+static const struct linear_range pca9450_buck_volts[] = {
+       REGULATOR_LINEAR_RANGE(600000, 0x00, 0x70, 25000),
+       REGULATOR_LINEAR_RANGE(3400000, 0x71, 0x7F, 0),
+};
+
+/*
+ * LDO1
+ * 1.6 to 3.3V ()
+ */
+static const struct linear_range pca9450_ldo1_volts[] = {
+       REGULATOR_LINEAR_RANGE(1600000, 0x00, 0x03, 100000),
+       REGULATOR_LINEAR_RANGE(3000000, 0x04, 0x07, 100000),
+};
+
+/*
+ * LDO2
+ * 0.8 to 1.15V (50mV step)
+ */
+static const struct linear_range pca9450_ldo2_volts[] = {
+       REGULATOR_LINEAR_RANGE(800000, 0x00, 0x07, 50000),
+};
+
+/*
+ * LDO3/4
+ * 0.8 to 3.3V (100mV step)
+ */
+static const struct linear_range pca9450_ldo34_volts[] = {
+       REGULATOR_LINEAR_RANGE(800000, 0x00, 0x19, 100000),
+       REGULATOR_LINEAR_RANGE(3300000, 0x1A, 0x1F, 0),
+};
+
+/*
+ * LDO5
+ * 1.8 to 3.3V (100mV step)
+ */
+static const struct linear_range pca9450_ldo5_volts[] = {
+       REGULATOR_LINEAR_RANGE(1800000,  0x00, 0x0F, 100000),
+};
+
+static int buck_set_dvs(const struct regulator_desc *desc,
+                       struct device_node *np, struct regmap *regmap,
+                       char *prop, unsigned int reg, unsigned int mask)
+{
+       int ret, i;
+       uint32_t uv;
+
+       ret = of_property_read_u32(np, prop, &uv);
+       if (ret == -EINVAL)
+               return 0;
+       else if (ret)
+               return ret;
+
+       for (i = 0; i < desc->n_voltages; i++) {
+               ret = regulator_desc_list_voltage_linear_range(desc, i);
+               if (ret < 0)
+                       continue;
+               if (ret == uv) {
+                       i <<= ffs(desc->vsel_mask) - 1;
+                       ret = regmap_update_bits(regmap, reg, mask, i);
+                       break;
+               }
+       }
+
+       return ret;
+}
+
+static int pca9450_set_dvs_levels(struct device_node *np,
+                           const struct regulator_desc *desc,
+                           struct regulator_config *cfg)
+{
+       struct pca9450_regulator_desc *data = container_of(desc,
+                                       struct pca9450_regulator_desc, desc);
+       const struct pc9450_dvs_config *dvs = &data->dvs;
+       unsigned int reg, mask;
+       char *prop;
+       int i, ret = 0;
+
+       for (i = 0; i < PCA9450_DVS_LEVEL_MAX; i++) {
+               switch (i) {
+               case PCA9450_DVS_LEVEL_RUN:
+                       prop = "nxp,dvs-run-voltage";
+                       reg = dvs->run_reg;
+                       mask = dvs->run_mask;
+                       break;
+               case PCA9450_DVS_LEVEL_STANDBY:
+                       prop = "nxp,dvs-standby-voltage";
+                       reg = dvs->standby_reg;
+                       mask = dvs->standby_mask;
+                       break;
+               default:
+                       return -EINVAL;
+               }
+
+               ret = buck_set_dvs(desc, np, cfg->regmap, prop, reg, mask);
+               if (ret)
+                       break;
+       }
+
+       return ret;
+}
+
+static const struct pca9450_regulator_desc pca9450a_regulators[] = {
+       {
+               .desc = {
+                       .name = "buck1",
+                       .of_match = of_match_ptr("BUCK1"),
+                       .regulators_node = of_match_ptr("regulators"),
+                       .id = PCA9450_BUCK1,
+                       .ops = &pca9450_dvs_buck_regulator_ops,
+                       .type = REGULATOR_VOLTAGE,
+                       .n_voltages = PCA9450_BUCK1_VOLTAGE_NUM,
+                       .linear_ranges = pca9450_dvs_buck_volts,
+                       .n_linear_ranges = ARRAY_SIZE(pca9450_dvs_buck_volts),
+                       .vsel_reg = PCA9450_REG_BUCK1OUT_DVS0,
+                       .vsel_mask = BUCK1OUT_DVS0_MASK,
+                       .enable_reg = PCA9450_REG_BUCK1CTRL,
+                       .enable_mask = BUCK1_ENMODE_MASK,
+                       .owner = THIS_MODULE,
+                       .of_parse_cb = pca9450_set_dvs_levels,
+               },
+               .dvs = {
+                       .run_reg = PCA9450_REG_BUCK1OUT_DVS0,
+                       .run_mask = BUCK1OUT_DVS0_MASK,
+                       .standby_reg = PCA9450_REG_BUCK1OUT_DVS1,
+                       .standby_mask = BUCK1OUT_DVS1_MASK,
+               },
+       },
+       {
+               .desc = {
+                       .name = "buck2",
+                       .of_match = of_match_ptr("BUCK2"),
+                       .regulators_node = of_match_ptr("regulators"),
+                       .id = PCA9450_BUCK2,
+                       .ops = &pca9450_dvs_buck_regulator_ops,
+                       .type = REGULATOR_VOLTAGE,
+                       .n_voltages = PCA9450_BUCK2_VOLTAGE_NUM,
+                       .linear_ranges = pca9450_dvs_buck_volts,
+                       .n_linear_ranges = ARRAY_SIZE(pca9450_dvs_buck_volts),
+                       .vsel_reg = PCA9450_REG_BUCK2OUT_DVS0,
+                       .vsel_mask = BUCK2OUT_DVS0_MASK,
+                       .enable_reg = PCA9450_REG_BUCK2CTRL,
+                       .enable_mask = BUCK1_ENMODE_MASK,
+                       .owner = THIS_MODULE,
+                       .of_parse_cb = pca9450_set_dvs_levels,
+               },
+               .dvs = {
+                       .run_reg = PCA9450_REG_BUCK2OUT_DVS0,
+                       .run_mask = BUCK2OUT_DVS0_MASK,
+                       .standby_reg = PCA9450_REG_BUCK2OUT_DVS1,
+                       .standby_mask = BUCK2OUT_DVS1_MASK,
+               },
+       },
+       {
+               .desc = {
+                       .name = "buck3",
+                       .of_match = of_match_ptr("BUCK3"),
+                       .regulators_node = of_match_ptr("regulators"),
+                       .id = PCA9450_BUCK3,
+                       .ops = &pca9450_dvs_buck_regulator_ops,
+                       .type = REGULATOR_VOLTAGE,
+                       .n_voltages = PCA9450_BUCK3_VOLTAGE_NUM,
+                       .linear_ranges = pca9450_dvs_buck_volts,
+                       .n_linear_ranges = ARRAY_SIZE(pca9450_dvs_buck_volts),
+                       .vsel_reg = PCA9450_REG_BUCK3OUT_DVS0,
+                       .vsel_mask = BUCK3OUT_DVS0_MASK,
+                       .enable_reg = PCA9450_REG_BUCK3CTRL,
+                       .enable_mask = BUCK3_ENMODE_MASK,
+                       .owner = THIS_MODULE,
+                       .of_parse_cb = pca9450_set_dvs_levels,
+               },
+               .dvs = {
+                       .run_reg = PCA9450_REG_BUCK3OUT_DVS0,
+                       .run_mask = BUCK3OUT_DVS0_MASK,
+                       .standby_reg = PCA9450_REG_BUCK3OUT_DVS1,
+                       .standby_mask = BUCK3OUT_DVS1_MASK,
+               },
+       },
+       {
+               .desc = {
+                       .name = "buck4",
+                       .of_match = of_match_ptr("BUCK4"),
+                       .regulators_node = of_match_ptr("regulators"),
+                       .id = PCA9450_BUCK4,
+                       .ops = &pca9450_buck_regulator_ops,
+                       .type = REGULATOR_VOLTAGE,
+                       .n_voltages = PCA9450_BUCK4_VOLTAGE_NUM,
+                       .linear_ranges = pca9450_buck_volts,
+                       .n_linear_ranges = ARRAY_SIZE(pca9450_buck_volts),
+                       .vsel_reg = PCA9450_REG_BUCK4OUT,
+                       .vsel_mask = BUCK4OUT_MASK,
+                       .enable_reg = PCA9450_REG_BUCK4CTRL,
+                       .enable_mask = BUCK4_ENMODE_MASK,
+                       .owner = THIS_MODULE,
+               },
+       },
+       {
+               .desc = {
+                       .name = "buck5",
+                       .of_match = of_match_ptr("BUCK5"),
+                       .regulators_node = of_match_ptr("regulators"),
+                       .id = PCA9450_BUCK5,
+                       .ops = &pca9450_buck_regulator_ops,
+                       .type = REGULATOR_VOLTAGE,
+                       .n_voltages = PCA9450_BUCK5_VOLTAGE_NUM,
+                       .linear_ranges = pca9450_buck_volts,
+                       .n_linear_ranges = ARRAY_SIZE(pca9450_buck_volts),
+                       .vsel_reg = PCA9450_REG_BUCK5OUT,
+                       .vsel_mask = BUCK5OUT_MASK,
+                       .enable_reg = PCA9450_REG_BUCK5CTRL,
+                       .enable_mask = BUCK5_ENMODE_MASK,
+                       .owner = THIS_MODULE,
+               },
+       },
+       {
+               .desc = {
+                       .name = "buck6",
+                       .of_match = of_match_ptr("BUCK6"),
+                       .regulators_node = of_match_ptr("regulators"),
+                       .id = PCA9450_BUCK6,
+                       .ops = &pca9450_buck_regulator_ops,
+                       .type = REGULATOR_VOLTAGE,
+                       .n_voltages = PCA9450_BUCK6_VOLTAGE_NUM,
+                       .linear_ranges = pca9450_buck_volts,
+                       .n_linear_ranges = ARRAY_SIZE(pca9450_buck_volts),
+                       .vsel_reg = PCA9450_REG_BUCK6OUT,
+                       .vsel_mask = BUCK6OUT_MASK,
+                       .enable_reg = PCA9450_REG_BUCK6CTRL,
+                       .enable_mask = BUCK6_ENMODE_MASK,
+                       .owner = THIS_MODULE,
+               },
+       },
+       {
+               .desc = {
+                       .name = "ldo1",
+                       .of_match = of_match_ptr("LDO1"),
+                       .regulators_node = of_match_ptr("regulators"),
+                       .id = PCA9450_LDO1,
+                       .ops = &pca9450_ldo_regulator_ops,
+                       .type = REGULATOR_VOLTAGE,
+                       .n_voltages = PCA9450_LDO1_VOLTAGE_NUM,
+                       .linear_ranges = pca9450_ldo1_volts,
+                       .n_linear_ranges = ARRAY_SIZE(pca9450_ldo1_volts),
+                       .vsel_reg = PCA9450_REG_LDO1CTRL,
+                       .vsel_mask = LDO1OUT_MASK,
+                       .enable_reg = PCA9450_REG_LDO1CTRL,
+                       .enable_mask = LDO1_EN_MASK,
+                       .owner = THIS_MODULE,
+               },
+       },
+       {
+               .desc = {
+                       .name = "ldo2",
+                       .of_match = of_match_ptr("LDO2"),
+                       .regulators_node = of_match_ptr("regulators"),
+                       .id = PCA9450_LDO2,
+                       .ops = &pca9450_ldo_regulator_ops,
+                       .type = REGULATOR_VOLTAGE,
+                       .n_voltages = PCA9450_LDO2_VOLTAGE_NUM,
+                       .linear_ranges = pca9450_ldo2_volts,
+                       .n_linear_ranges = ARRAY_SIZE(pca9450_ldo2_volts),
+                       .vsel_reg = PCA9450_REG_LDO2CTRL,
+                       .vsel_mask = LDO2OUT_MASK,
+                       .enable_reg = PCA9450_REG_LDO2CTRL,
+                       .enable_mask = LDO2_EN_MASK,
+                       .owner = THIS_MODULE,
+               },
+       },
+       {
+               .desc = {
+                       .name = "ldo3",
+                       .of_match = of_match_ptr("LDO3"),
+                       .regulators_node = of_match_ptr("regulators"),
+                       .id = PCA9450_LDO3,
+                       .ops = &pca9450_ldo_regulator_ops,
+                       .type = REGULATOR_VOLTAGE,
+                       .n_voltages = PCA9450_LDO3_VOLTAGE_NUM,
+                       .linear_ranges = pca9450_ldo34_volts,
+                       .n_linear_ranges = ARRAY_SIZE(pca9450_ldo34_volts),
+                       .vsel_reg = PCA9450_REG_LDO3CTRL,
+                       .vsel_mask = LDO3OUT_MASK,
+                       .enable_reg = PCA9450_REG_LDO3CTRL,
+                       .enable_mask = LDO3_EN_MASK,
+                       .owner = THIS_MODULE,
+               },
+       },
+       {
+               .desc = {
+                       .name = "ldo4",
+                       .of_match = of_match_ptr("LDO4"),
+                       .regulators_node = of_match_ptr("regulators"),
+                       .id = PCA9450_LDO4,
+                       .ops = &pca9450_ldo_regulator_ops,
+                       .type = REGULATOR_VOLTAGE,
+                       .n_voltages = PCA9450_LDO4_VOLTAGE_NUM,
+                       .linear_ranges = pca9450_ldo34_volts,
+                       .n_linear_ranges = ARRAY_SIZE(pca9450_ldo34_volts),
+                       .vsel_reg = PCA9450_REG_LDO4CTRL,
+                       .vsel_mask = LDO4OUT_MASK,
+                       .enable_reg = PCA9450_REG_LDO4CTRL,
+                       .enable_mask = LDO4_EN_MASK,
+                       .owner = THIS_MODULE,
+               },
+       },
+       {
+               .desc = {
+                       .name = "ldo5",
+                       .of_match = of_match_ptr("LDO5"),
+                       .regulators_node = of_match_ptr("regulators"),
+                       .id = PCA9450_LDO5,
+                       .ops = &pca9450_ldo_regulator_ops,
+                       .type = REGULATOR_VOLTAGE,
+                       .n_voltages = PCA9450_LDO5_VOLTAGE_NUM,
+                       .linear_ranges = pca9450_ldo5_volts,
+                       .n_linear_ranges = ARRAY_SIZE(pca9450_ldo5_volts),
+                       .vsel_reg = PCA9450_REG_LDO5CTRL_H,
+                       .vsel_mask = LDO5HOUT_MASK,
+                       .enable_reg = PCA9450_REG_LDO5CTRL_H,
+                       .enable_mask = LDO5H_EN_MASK,
+                       .owner = THIS_MODULE,
+               },
+       },
+};
+
+/*
+ * Buck3 removed on PCA9450B and connected with Buck1 internal for dual phase
+ * on PCA9450C as no Buck3.
+ */
+static const struct pca9450_regulator_desc pca9450bc_regulators[] = {
+       {
+               .desc = {
+                       .name = "buck1",
+                       .of_match = of_match_ptr("BUCK1"),
+                       .regulators_node = of_match_ptr("regulators"),
+                       .id = PCA9450_BUCK1,
+                       .ops = &pca9450_dvs_buck_regulator_ops,
+                       .type = REGULATOR_VOLTAGE,
+                       .n_voltages = PCA9450_BUCK1_VOLTAGE_NUM,
+                       .linear_ranges = pca9450_dvs_buck_volts,
+                       .n_linear_ranges = ARRAY_SIZE(pca9450_dvs_buck_volts),
+                       .vsel_reg = PCA9450_REG_BUCK1OUT_DVS0,
+                       .vsel_mask = BUCK1OUT_DVS0_MASK,
+                       .enable_reg = PCA9450_REG_BUCK1CTRL,
+                       .enable_mask = BUCK1_ENMODE_MASK,
+                       .owner = THIS_MODULE,
+                       .of_parse_cb = pca9450_set_dvs_levels,
+               },
+               .dvs = {
+                       .run_reg = PCA9450_REG_BUCK1OUT_DVS0,
+                       .run_mask = BUCK1OUT_DVS0_MASK,
+                       .standby_reg = PCA9450_REG_BUCK1OUT_DVS1,
+                       .standby_mask = BUCK1OUT_DVS1_MASK,
+               },
+       },
+       {
+               .desc = {
+                       .name = "buck2",
+                       .of_match = of_match_ptr("BUCK2"),
+                       .regulators_node = of_match_ptr("regulators"),
+                       .id = PCA9450_BUCK2,
+                       .ops = &pca9450_dvs_buck_regulator_ops,
+                       .type = REGULATOR_VOLTAGE,
+                       .n_voltages = PCA9450_BUCK2_VOLTAGE_NUM,
+                       .linear_ranges = pca9450_dvs_buck_volts,
+                       .n_linear_ranges = ARRAY_SIZE(pca9450_dvs_buck_volts),
+                       .vsel_reg = PCA9450_REG_BUCK2OUT_DVS0,
+                       .vsel_mask = BUCK2OUT_DVS0_MASK,
+                       .enable_reg = PCA9450_REG_BUCK2CTRL,
+                       .enable_mask = BUCK1_ENMODE_MASK,
+                       .owner = THIS_MODULE,
+                       .of_parse_cb = pca9450_set_dvs_levels,
+               },
+               .dvs = {
+                       .run_reg = PCA9450_REG_BUCK2OUT_DVS0,
+                       .run_mask = BUCK2OUT_DVS0_MASK,
+                       .standby_reg = PCA9450_REG_BUCK2OUT_DVS1,
+                       .standby_mask = BUCK2OUT_DVS1_MASK,
+               },
+       },
+       {
+               .desc = {
+                       .name = "buck4",
+                       .of_match = of_match_ptr("BUCK4"),
+                       .regulators_node = of_match_ptr("regulators"),
+                       .id = PCA9450_BUCK4,
+                       .ops = &pca9450_buck_regulator_ops,
+                       .type = REGULATOR_VOLTAGE,
+                       .n_voltages = PCA9450_BUCK4_VOLTAGE_NUM,
+                       .linear_ranges = pca9450_buck_volts,
+                       .n_linear_ranges = ARRAY_SIZE(pca9450_buck_volts),
+                       .vsel_reg = PCA9450_REG_BUCK4OUT,
+                       .vsel_mask = BUCK4OUT_MASK,
+                       .enable_reg = PCA9450_REG_BUCK4CTRL,
+                       .enable_mask = BUCK4_ENMODE_MASK,
+                       .owner = THIS_MODULE,
+               },
+       },
+       {
+               .desc = {
+                       .name = "buck5",
+                       .of_match = of_match_ptr("BUCK5"),
+                       .regulators_node = of_match_ptr("regulators"),
+                       .id = PCA9450_BUCK5,
+                       .ops = &pca9450_buck_regulator_ops,
+                       .type = REGULATOR_VOLTAGE,
+                       .n_voltages = PCA9450_BUCK5_VOLTAGE_NUM,
+                       .linear_ranges = pca9450_buck_volts,
+                       .n_linear_ranges = ARRAY_SIZE(pca9450_buck_volts),
+                       .vsel_reg = PCA9450_REG_BUCK5OUT,
+                       .vsel_mask = BUCK5OUT_MASK,
+                       .enable_reg = PCA9450_REG_BUCK5CTRL,
+                       .enable_mask = BUCK5_ENMODE_MASK,
+                       .owner = THIS_MODULE,
+               },
+       },
+       {
+               .desc = {
+                       .name = "buck6",
+                       .of_match = of_match_ptr("BUCK6"),
+                       .regulators_node = of_match_ptr("regulators"),
+                       .id = PCA9450_BUCK6,
+                       .ops = &pca9450_buck_regulator_ops,
+                       .type = REGULATOR_VOLTAGE,
+                       .n_voltages = PCA9450_BUCK6_VOLTAGE_NUM,
+                       .linear_ranges = pca9450_buck_volts,
+                       .n_linear_ranges = ARRAY_SIZE(pca9450_buck_volts),
+                       .vsel_reg = PCA9450_REG_BUCK6OUT,
+                       .vsel_mask = BUCK6OUT_MASK,
+                       .enable_reg = PCA9450_REG_BUCK6CTRL,
+                       .enable_mask = BUCK6_ENMODE_MASK,
+                       .owner = THIS_MODULE,
+               },
+       },
+       {
+               .desc = {
+                       .name = "ldo1",
+                       .of_match = of_match_ptr("LDO1"),
+                       .regulators_node = of_match_ptr("regulators"),
+                       .id = PCA9450_LDO1,
+                       .ops = &pca9450_ldo_regulator_ops,
+                       .type = REGULATOR_VOLTAGE,
+                       .n_voltages = PCA9450_LDO1_VOLTAGE_NUM,
+                       .linear_ranges = pca9450_ldo1_volts,
+                       .n_linear_ranges = ARRAY_SIZE(pca9450_ldo1_volts),
+                       .vsel_reg = PCA9450_REG_LDO1CTRL,
+                       .vsel_mask = LDO1OUT_MASK,
+                       .enable_reg = PCA9450_REG_LDO1CTRL,
+                       .enable_mask = LDO1_EN_MASK,
+                       .owner = THIS_MODULE,
+               },
+       },
+       {
+               .desc = {
+                       .name = "ldo2",
+                       .of_match = of_match_ptr("LDO2"),
+                       .regulators_node = of_match_ptr("regulators"),
+                       .id = PCA9450_LDO2,
+                       .ops = &pca9450_ldo_regulator_ops,
+                       .type = REGULATOR_VOLTAGE,
+                       .n_voltages = PCA9450_LDO2_VOLTAGE_NUM,
+                       .linear_ranges = pca9450_ldo2_volts,
+                       .n_linear_ranges = ARRAY_SIZE(pca9450_ldo2_volts),
+                       .vsel_reg = PCA9450_REG_LDO2CTRL,
+                       .vsel_mask = LDO2OUT_MASK,
+                       .enable_reg = PCA9450_REG_LDO2CTRL,
+                       .enable_mask = LDO2_EN_MASK,
+                       .owner = THIS_MODULE,
+               },
+       },
+       {
+               .desc = {
+                       .name = "ldo3",
+                       .of_match = of_match_ptr("LDO3"),
+                       .regulators_node = of_match_ptr("regulators"),
+                       .id = PCA9450_LDO3,
+                       .ops = &pca9450_ldo_regulator_ops,
+                       .type = REGULATOR_VOLTAGE,
+                       .n_voltages = PCA9450_LDO3_VOLTAGE_NUM,
+                       .linear_ranges = pca9450_ldo34_volts,
+                       .n_linear_ranges = ARRAY_SIZE(pca9450_ldo34_volts),
+                       .vsel_reg = PCA9450_REG_LDO3CTRL,
+                       .vsel_mask = LDO3OUT_MASK,
+                       .enable_reg = PCA9450_REG_LDO3CTRL,
+                       .enable_mask = LDO3_EN_MASK,
+                       .owner = THIS_MODULE,
+               },
+       },
+       {
+               .desc = {
+                       .name = "ldo4",
+                       .of_match = of_match_ptr("LDO4"),
+                       .regulators_node = of_match_ptr("regulators"),
+                       .id = PCA9450_LDO4,
+                       .ops = &pca9450_ldo_regulator_ops,
+                       .type = REGULATOR_VOLTAGE,
+                       .n_voltages = PCA9450_LDO4_VOLTAGE_NUM,
+                       .linear_ranges = pca9450_ldo34_volts,
+                       .n_linear_ranges = ARRAY_SIZE(pca9450_ldo34_volts),
+                       .vsel_reg = PCA9450_REG_LDO4CTRL,
+                       .vsel_mask = LDO4OUT_MASK,
+                       .enable_reg = PCA9450_REG_LDO4CTRL,
+                       .enable_mask = LDO4_EN_MASK,
+                       .owner = THIS_MODULE,
+               },
+       },
+       {
+               .desc = {
+                       .name = "ldo5",
+                       .of_match = of_match_ptr("LDO5"),
+                       .regulators_node = of_match_ptr("regulators"),
+                       .id = PCA9450_LDO5,
+                       .ops = &pca9450_ldo_regulator_ops,
+                       .type = REGULATOR_VOLTAGE,
+                       .n_voltages = PCA9450_LDO5_VOLTAGE_NUM,
+                       .linear_ranges = pca9450_ldo5_volts,
+                       .n_linear_ranges = ARRAY_SIZE(pca9450_ldo5_volts),
+                       .vsel_reg = PCA9450_REG_LDO5CTRL_H,
+                       .vsel_mask = LDO5HOUT_MASK,
+                       .enable_reg = PCA9450_REG_LDO5CTRL_H,
+                       .enable_mask = LDO5H_EN_MASK,
+                       .owner = THIS_MODULE,
+               },
+       },
+};
+
+static irqreturn_t pca9450_irq_handler(int irq, void *data)
+{
+       struct pca9450 *pca9450 = data;
+       struct regmap *regmap = pca9450->regmap;
+       unsigned int status;
+       int ret;
+
+       ret = regmap_read(regmap, PCA9450_REG_INT1, &status);
+       if (ret < 0) {
+               dev_err(pca9450->dev,
+                       "Failed to read INT1(%d)\n", ret);
+               return IRQ_NONE;
+       }
+
+       if (status & IRQ_PWRON)
+               dev_warn(pca9450->dev, "PWRON interrupt.\n");
+
+       if (status & IRQ_WDOGB)
+               dev_warn(pca9450->dev, "WDOGB interrupt.\n");
+
+       if (status & IRQ_VR_FLT1)
+               dev_warn(pca9450->dev, "VRFLT1 interrupt.\n");
+
+       if (status & IRQ_VR_FLT2)
+               dev_warn(pca9450->dev, "VRFLT2 interrupt.\n");
+
+       if (status & IRQ_LOWVSYS)
+               dev_warn(pca9450->dev, "LOWVSYS interrupt.\n");
+
+       if (status & IRQ_THERM_105)
+               dev_warn(pca9450->dev, "IRQ_THERM_105 interrupt.\n");
+
+       if (status & IRQ_THERM_125)
+               dev_warn(pca9450->dev, "IRQ_THERM_125 interrupt.\n");
+
+       return IRQ_HANDLED;
+}
+
+static int pca9450_i2c_probe(struct i2c_client *i2c,
+                            const struct i2c_device_id *id)
+{
+       enum pca9450_chip_type type = (unsigned int)(uintptr_t)
+                                     of_device_get_match_data(&i2c->dev);
+       const struct pca9450_regulator_desc     *regulator_desc;
+       struct regulator_config config = { };
+       struct pca9450 *pca9450;
+       unsigned int device_id, i;
+       int ret;
+
+       if (!i2c->irq) {
+               dev_err(&i2c->dev, "No IRQ configured?\n");
+               return -EINVAL;
+       }
+
+       pca9450 = devm_kzalloc(&i2c->dev, sizeof(struct pca9450), GFP_KERNEL);
+       if (!pca9450)
+               return -ENOMEM;
+
+       switch (type) {
+       case PCA9450_TYPE_PCA9450A:
+               regulator_desc = pca9450a_regulators;
+               pca9450->rcnt = ARRAY_SIZE(pca9450a_regulators);
+               break;
+       case PCA9450_TYPE_PCA9450BC:
+               regulator_desc = pca9450bc_regulators;
+               pca9450->rcnt = ARRAY_SIZE(pca9450bc_regulators);
+               break;
+       default:
+               dev_err(&i2c->dev, "Unknown device type");
+               return -EINVAL;
+       }
+
+       pca9450->irq = i2c->irq;
+       pca9450->type = type;
+       pca9450->dev = &i2c->dev;
+
+       dev_set_drvdata(&i2c->dev, pca9450);
+
+       pca9450->regmap = devm_regmap_init_i2c(i2c,
+                                              &pca9450_regmap_config);
+       if (IS_ERR(pca9450->regmap)) {
+               dev_err(&i2c->dev, "regmap initialization failed\n");
+               return PTR_ERR(pca9450->regmap);
+       }
+
+       ret = regmap_read(pca9450->regmap, PCA9450_REG_DEV_ID, &device_id);
+       if (ret) {
+               dev_err(&i2c->dev, "Read device id error\n");
+               return ret;
+       }
+
+       /* Check your board and dts for match the right pmic */
+       if (((device_id >> 4) != 0x1 && type == PCA9450_TYPE_PCA9450A) ||
+           ((device_id >> 4) != 0x3 && type == PCA9450_TYPE_PCA9450BC)) {
+               dev_err(&i2c->dev, "Device id(%x) mismatched\n",
+                       device_id >> 4);
+               return -EINVAL;
+       }
+
+       for (i = 0; i < pca9450->rcnt; i++) {
+               const struct regulator_desc *desc;
+               struct regulator_dev *rdev;
+               const struct pca9450_regulator_desc *r;
+
+               r = &regulator_desc[i];
+               desc = &r->desc;
+
+               config.regmap = pca9450->regmap;
+               config.dev = pca9450->dev;
+
+               rdev = devm_regulator_register(pca9450->dev, desc, &config);
+               if (IS_ERR(rdev)) {
+                       ret = PTR_ERR(rdev);
+                       dev_err(pca9450->dev,
+                               "Failed to register regulator(%s): %d\n",
+                               desc->name, ret);
+                       return ret;
+               }
+       }
+
+       ret = devm_request_threaded_irq(pca9450->dev, pca9450->irq, NULL,
+                                       pca9450_irq_handler,
+                                       (IRQF_TRIGGER_FALLING | IRQF_ONESHOT),
+                                       "pca9450-irq", pca9450);
+       if (ret != 0) {
+               dev_err(pca9450->dev, "Failed to request IRQ: %d\n",
+                       pca9450->irq);
+               return ret;
+       }
+       /* Unmask all interrupt except PWRON/WDOG/RSVD */
+       ret = regmap_update_bits(pca9450->regmap, PCA9450_REG_INT1_MSK,
+                               IRQ_VR_FLT1 | IRQ_VR_FLT2 | IRQ_LOWVSYS |
+                               IRQ_THERM_105 | IRQ_THERM_125,
+                               IRQ_PWRON | IRQ_WDOGB | IRQ_RSVD);
+       if (ret) {
+               dev_err(&i2c->dev, "Unmask irq error\n");
+               return ret;
+       }
+
+       dev_info(&i2c->dev, "%s probed.\n",
+               type == PCA9450_TYPE_PCA9450A ? "pca9450a" : "pca9450bc");
+
+       return 0;
+}
+
+static const struct of_device_id pca9450_of_match[] = {
+       {
+               .compatible = "nxp,pca9450a",
+               .data = (void *)PCA9450_TYPE_PCA9450A,
+       },
+       {
+               .compatible = "nxp,pca9450b",
+               .data = (void *)PCA9450_TYPE_PCA9450BC,
+       },
+       {
+               .compatible = "nxp,pca9450c",
+               .data = (void *)PCA9450_TYPE_PCA9450BC,
+       },
+       { }
+};
+MODULE_DEVICE_TABLE(of, pca9450_of_match);
+
+static struct i2c_driver pca9450_i2c_driver = {
+       .driver = {
+               .name = "nxp-pca9450",
+               .of_match_table = pca9450_of_match,
+       },
+       .probe = pca9450_i2c_probe,
+};
+
+static int __init pca9450_i2c_init(void)
+{
+       return i2c_add_driver(&pca9450_i2c_driver);
+}
+module_init(pca9450_i2c_init);
+
+static void __exit pca9450_i2c_exit(void)
+{
+       i2c_del_driver(&pca9450_i2c_driver);
+}
+module_exit(pca9450_i2c_exit);
+
+MODULE_AUTHOR("Robin Gong <yibin.gong@nxp.com>");
+MODULE_DESCRIPTION("NXP PCA9450 Power Management IC driver");
+MODULE_LICENSE("GPL");
diff --git a/include/linux/regulator/pca9450.h b/include/linux/regulator/pca9450.h
new file mode 100644 (file)
index 0000000..1bbd301
--- /dev/null
@@ -0,0 +1,219 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/* Copyright 2020 NXP. */
+
+#ifndef __LINUX_REG_PCA9450_H__
+#define __LINUX_REG_PCA9450_H__
+
+#include <linux/regmap.h>
+
+enum pca9450_chip_type {
+       PCA9450_TYPE_PCA9450A = 0,
+       PCA9450_TYPE_PCA9450BC,
+       PCA9450_TYPE_AMOUNT,
+};
+
+enum {
+       PCA9450_BUCK1 = 0,
+       PCA9450_BUCK2,
+       PCA9450_BUCK3,
+       PCA9450_BUCK4,
+       PCA9450_BUCK5,
+       PCA9450_BUCK6,
+       PCA9450_LDO1,
+       PCA9450_LDO2,
+       PCA9450_LDO3,
+       PCA9450_LDO4,
+       PCA9450_LDO5,
+       PCA9450_REGULATOR_CNT,
+};
+
+enum {
+       PCA9450_DVS_LEVEL_RUN = 0,
+       PCA9450_DVS_LEVEL_STANDBY,
+       PCA9450_DVS_LEVEL_MAX,
+};
+
+#define PCA9450_BUCK1_VOLTAGE_NUM      0x80
+#define PCA9450_BUCK2_VOLTAGE_NUM      0x80
+#define PCA9450_BUCK3_VOLTAGE_NUM      0x80
+#define PCA9450_BUCK4_VOLTAGE_NUM      0x80
+
+#define PCA9450_BUCK5_VOLTAGE_NUM      0x80
+#define PCA9450_BUCK6_VOLTAGE_NUM      0x80
+
+#define PCA9450_LDO1_VOLTAGE_NUM       0x08
+#define PCA9450_LDO2_VOLTAGE_NUM       0x08
+#define PCA9450_LDO3_VOLTAGE_NUM       0x20
+#define PCA9450_LDO4_VOLTAGE_NUM       0x20
+#define PCA9450_LDO5_VOLTAGE_NUM       0x10
+
+enum {
+       PCA9450_REG_DEV_ID          = 0x00,
+       PCA9450_REG_INT1            = 0x01,
+       PCA9450_REG_INT1_MSK        = 0x02,
+       PCA9450_REG_STATUS1         = 0x03,
+       PCA9450_REG_STATUS2         = 0x04,
+       PCA9450_REG_PWRON_STAT      = 0x05,
+       PCA9450_REG_SWRST           = 0x06,
+       PCA9450_REG_PWRCTRL         = 0x07,
+       PCA9450_REG_RESET_CTRL      = 0x08,
+       PCA9450_REG_CONFIG1         = 0x09,
+       PCA9450_REG_CONFIG2         = 0x0A,
+       PCA9450_REG_BUCK123_DVS     = 0x0C,
+       PCA9450_REG_BUCK1OUT_LIMIT  = 0x0D,
+       PCA9450_REG_BUCK2OUT_LIMIT  = 0x0E,
+       PCA9450_REG_BUCK3OUT_LIMIT  = 0x0F,
+       PCA9450_REG_BUCK1CTRL       = 0x10,
+       PCA9450_REG_BUCK1OUT_DVS0   = 0x11,
+       PCA9450_REG_BUCK1OUT_DVS1   = 0x12,
+       PCA9450_REG_BUCK2CTRL       = 0x13,
+       PCA9450_REG_BUCK2OUT_DVS0   = 0x14,
+       PCA9450_REG_BUCK2OUT_DVS1   = 0x15,
+       PCA9450_REG_BUCK3CTRL       = 0x16,
+       PCA9450_REG_BUCK3OUT_DVS0   = 0x17,
+       PCA9450_REG_BUCK3OUT_DVS1   = 0x18,
+       PCA9450_REG_BUCK4CTRL       = 0x19,
+       PCA9450_REG_BUCK4OUT        = 0x1A,
+       PCA9450_REG_BUCK5CTRL       = 0x1B,
+       PCA9450_REG_BUCK5OUT        = 0x1C,
+       PCA9450_REG_BUCK6CTRL       = 0x1D,
+       PCA9450_REG_BUCK6OUT        = 0x1E,
+       PCA9450_REG_LDO_AD_CTRL     = 0x20,
+       PCA9450_REG_LDO1CTRL        = 0x21,
+       PCA9450_REG_LDO2CTRL        = 0x22,
+       PCA9450_REG_LDO3CTRL        = 0x23,
+       PCA9450_REG_LDO4CTRL        = 0x24,
+       PCA9450_REG_LDO5CTRL_L      = 0x25,
+       PCA9450_REG_LDO5CTRL_H      = 0x26,
+       PCA9450_REG_LOADSW_CTRL     = 0x2A,
+       PCA9450_REG_VRFLT1_STS      = 0x2B,
+       PCA9450_REG_VRFLT2_STS      = 0x2C,
+       PCA9450_REG_VRFLT1_MASK     = 0x2D,
+       PCA9450_REG_VRFLT2_MASK     = 0x2E,
+       PCA9450_MAX_REGISTER        = 0x2F,
+};
+
+/* PCA9450 BUCK ENMODE bits */
+#define BUCK_ENMODE_OFF                        0x00
+#define BUCK_ENMODE_ONREQ              0x01
+#define BUCK_ENMODE_ONREQ_STBYREQ      0x02
+#define BUCK_ENMODE_ON                 0x03
+
+/* PCA9450_REG_BUCK1_CTRL bits */
+#define BUCK1_RAMP_MASK                        0xC0
+#define BUCK1_RAMP_25MV                        0x0
+#define BUCK1_RAMP_12P5MV              0x1
+#define BUCK1_RAMP_6P25MV              0x2
+#define BUCK1_RAMP_3P125MV             0x3
+#define BUCK1_DVS_CTRL                 0x10
+#define BUCK1_AD                       0x08
+#define BUCK1_FPWM                     0x04
+#define BUCK1_ENMODE_MASK              0x03
+
+/* PCA9450_REG_BUCK2_CTRL bits */
+#define BUCK2_RAMP_MASK                        0xC0
+#define BUCK2_RAMP_25MV                        0x0
+#define BUCK2_RAMP_12P5MV              0x1
+#define BUCK2_RAMP_6P25MV              0x2
+#define BUCK2_RAMP_3P125MV             0x3
+#define BUCK2_DVS_CTRL                 0x10
+#define BUCK2_AD                       0x08
+#define BUCK2_FPWM                     0x04
+#define BUCK2_ENMODE_MASK              0x03
+
+/* PCA9450_REG_BUCK3_CTRL bits */
+#define BUCK3_RAMP_MASK                        0xC0
+#define BUCK3_RAMP_25MV                        0x0
+#define BUCK3_RAMP_12P5MV              0x1
+#define BUCK3_RAMP_6P25MV              0x2
+#define BUCK3_RAMP_3P125MV             0x3
+#define BUCK3_DVS_CTRL                 0x10
+#define BUCK3_AD                       0x08
+#define BUCK3_FPWM                     0x04
+#define BUCK3_ENMODE_MASK              0x03
+
+/* PCA9450_REG_BUCK4_CTRL bits */
+#define BUCK4_AD                       0x08
+#define BUCK4_FPWM                     0x04
+#define BUCK4_ENMODE_MASK              0x03
+
+/* PCA9450_REG_BUCK5_CTRL bits */
+#define BUCK5_AD                       0x08
+#define BUCK5_FPWM                     0x04
+#define BUCK5_ENMODE_MASK              0x03
+
+/* PCA9450_REG_BUCK6_CTRL bits */
+#define BUCK6_AD                       0x08
+#define BUCK6_FPWM                     0x04
+#define BUCK6_ENMODE_MASK              0x03
+
+/* PCA9450_BUCK1OUT_DVS0 bits */
+#define BUCK1OUT_DVS0_MASK             0x7F
+#define BUCK1OUT_DVS0_DEFAULT          0x14
+
+/* PCA9450_BUCK1OUT_DVS1 bits */
+#define BUCK1OUT_DVS1_MASK             0x7F
+#define BUCK1OUT_DVS1_DEFAULT          0x14
+
+/* PCA9450_BUCK2OUT_DVS0 bits */
+#define BUCK2OUT_DVS0_MASK             0x7F
+#define BUCK2OUT_DVS0_DEFAULT          0x14
+
+/* PCA9450_BUCK2OUT_DVS1 bits */
+#define BUCK2OUT_DVS1_MASK             0x7F
+#define BUCK2OUT_DVS1_DEFAULT          0x14
+
+/* PCA9450_BUCK3OUT_DVS0 bits */
+#define BUCK3OUT_DVS0_MASK             0x7F
+#define BUCK3OUT_DVS0_DEFAULT          0x14
+
+/* PCA9450_BUCK3OUT_DVS1 bits */
+#define BUCK3OUT_DVS1_MASK             0x7F
+#define BUCK3OUT_DVS1_DEFAULT          0x14
+
+/* PCA9450_REG_BUCK4OUT bits */
+#define BUCK4OUT_MASK                  0x7F
+#define BUCK4OUT_DEFAULT               0x6C
+
+/* PCA9450_REG_BUCK5OUT bits */
+#define BUCK5OUT_MASK                  0x7F
+#define BUCK5OUT_DEFAULT               0x30
+
+/* PCA9450_REG_BUCK6OUT bits */
+#define BUCK6OUT_MASK                  0x7F
+#define BUCK6OUT_DEFAULT               0x14
+
+/* PCA9450_REG_LDO1_VOLT bits */
+#define LDO1_EN_MASK                   0xC0
+#define LDO1OUT_MASK                   0x07
+
+/* PCA9450_REG_LDO2_VOLT bits */
+#define LDO2_EN_MASK                   0xC0
+#define LDO2OUT_MASK                   0x07
+
+/* PCA9450_REG_LDO3_VOLT bits */
+#define LDO3_EN_MASK                   0xC0
+#define LDO3OUT_MASK                   0x0F
+
+/* PCA9450_REG_LDO4_VOLT bits */
+#define LDO4_EN_MASK                   0xC0
+#define LDO4OUT_MASK                   0x0F
+
+/* PCA9450_REG_LDO5_VOLT bits */
+#define LDO5L_EN_MASK                  0xC0
+#define LDO5LOUT_MASK                  0x0F
+
+#define LDO5H_EN_MASK                  0xC0
+#define LDO5HOUT_MASK                  0x0F
+
+/* PCA9450_REG_IRQ bits */
+#define IRQ_PWRON                      0x80
+#define IRQ_WDOGB                      0x40
+#define IRQ_RSVD                       0x20
+#define IRQ_VR_FLT1                    0x10
+#define IRQ_VR_FLT2                    0x08
+#define IRQ_LOWVSYS                    0x04
+#define IRQ_THERM_105                  0x02
+#define IRQ_THERM_125                  0x01
+
+#endif /* __LINUX_REG_PCA9450_H__ */