ARM: dts: stm32: update sdmmc IP version for STM32MP15

Update the IP version to v2.0, which supports linked lists in internal DMA,
and is present in STM32MP1 SoCs.

The mmci driver supports the v2.0 periph id since 7a2a98be672b ("mmc: mmci:
Add support for sdmmc variant revision 2.0"), so it's now Ok to add it into
the SoC device tree to benefit from the improved DMA support.

Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>

diff --git a/arch/arm/boot/dts/stm32mp151.dtsi b/arch/arm/boot/dts/stm32mp151.dtsi
index f0efd51..6d01b7f 100644 (file)
--- a/arch/arm/boot/dts/stm32mp151.dtsi
+++ b/arch/arm/boot/dts/stm32mp151.dtsi
@@ -1047,7 +1047,7 @@
 
                sdmmc3: sdmmc@48004000 {
                        compatible = "arm,pl18x", "arm,primecell";
-                       arm,primecell-periphid = <0x10153180>;
+                       arm,primecell-periphid = <0x00253180>;
                        reg = <0x48004000 0x400>;
                        interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
                        interrupt-names = "cmd_irq";
@@ -1360,7 +1360,7 @@
 
                sdmmc1: sdmmc@58005000 {
                        compatible = "arm,pl18x", "arm,primecell";
-                       arm,primecell-periphid = <0x10153180>;
+                       arm,primecell-periphid = <0x00253180>;
                        reg = <0x58005000 0x1000>;
                        interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
                        interrupt-names = "cmd_irq";
@@ -1375,7 +1375,7 @@
 
                sdmmc2: sdmmc@58007000 {
                        compatible = "arm,pl18x", "arm,primecell";
-                       arm,primecell-periphid = <0x10153180>;
+                       arm,primecell-periphid = <0x00253180>;
                        reg = <0x58007000 0x1000>;
                        interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
                        interrupt-names = "cmd_irq";