ARM: dts: at91: tse850: add properties for gpio-line-names

Signal names are one-to-one copies from the schematics, except VBUS
which is an unnamed signal there.

Signed-off-by: Peter Rosin <peda@axentia.se>
[claudiu.beznea: add 1 indentation tab before index based comment]
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/32995b53-7f73-936f-a81d-5f1969f64910@axentia.se

diff --git a/arch/arm/boot/dts/at91-tse850-3.dts b/arch/arm/boot/dts/at91-tse850-3.dts
index b99a4fb..9d58a39 100644 (file)
--- a/arch/arm/boot/dts/at91-tse850-3.dts
+++ b/arch/arm/boot/dts/at91-tse850-3.dts
@@ -300,3 +300,63 @@
 
        dmas = <0>, <0>;        /*  Do not use DMA for dbgu */
 };
+
+&pioA {
+       gpio-line-names =
+       /*  0 */        "SUP-A", "SUP-B", "SUP-C", "SIG<LEV",
+       /*  4 */        "", "/RFRST", "", "",
+       /*  8 */        "/ADD", "", "/LOOP1", "/LOOP2",
+       /* 12 */        "", "", "", "",
+       /* 16 */        "LED1GREEN", "LED1RED", "LED2GREEN", "LED2RED",
+       /* 20 */        "LED3GREEN", "LED3RED", "LED4GREEN", "LED4RED",
+       /* 24 */        "", "", "", "",
+       /* 28 */        "", "", "SDA", "SCL";
+};
+
+&pioB {
+       gpio-line-names =
+       /*  0 */        "", "", "", "",
+       /*  4 */        "", "", "", "",
+       /*  8 */        "", "", "", "",
+       /* 12 */        "", "", "", "",
+       /* 16 */        "", "", "", "",
+       /* 20 */        "", "", "", "",
+       /* 24 */        "", "", "SIG<LIN", "SIG>LIN",
+       /* 28 */        "RXD", "TXD", "BRX", "BTX";
+};
+
+&pioC {
+       gpio-line-names =
+       /*  0 */        "ETX0", "ETX1", "ERX0", "ERX1",
+       /*  4 */        "ETXEN", "ECRSDV", "ERXER", "EREFCK",
+       /*  8 */        "EMDC", "EMDIO", "", "",
+       /* 12 */        "", "", "", "/ILIM",
+       /* 16 */        "BCK", "LRCK", "DIN", "",
+       /* 20 */        "", "", "", "",
+       /* 24 */        "", "", "", "",
+       /* 28 */        "", "", "", "VBUS";
+};
+
+&pioD {
+       gpio-line-names =
+       /*  0 */        "I1", "I2", "O1", "EXTVEN",
+       /*  4 */        "", "456KHZ", "VCTRL", "SYNCSEL",
+       /*  8 */        "STEREO", "", "", "",
+       /* 12 */        "", "", "", "",
+       /* 16 */        "", ">LIN", "LIN>", "",
+       /* 20 */        "VREFEN", "", "", "",
+       /* 24 */        "", "", "VINOK", "",
+       /* 28 */        "POEOK", "USBON", "POELOAD", "";
+};
+
+&pioE {
+       gpio-line-names =
+       /*  0 */        "", "", "", "",
+       /*  4 */        "", "", "", "",
+       /*  8 */        "", "", "", "",
+       /* 12 */        "", "", "", "",
+       /* 16 */        "", "", "", "",
+       /* 20 */        "", "ALE", "CLE", "",
+       /* 24 */        "", "", "", "",
+       /* 28 */        "", "", "", "/ETHINT";
+};